Gosund SP111 mit Tasmota 13.2.0 Problem mit DP

[RalfTh]

@ralla66 Habe mal die Daten aus der Tasmota-Konsole kopiert

07:59:44.150 MQT: tele/tasmota_26536D/SENSOR = {"Time":"2023-11-06T07:59:44","ENERGY":{"TotalStartTime":"2020-01-07T09:52:26","Total":0.823,"Yesterday":0.600,"Today":0.223,"Period":4,"Power":13,"ApparentPower":44,"ReactivePower":43,"Factor":0.28,"Voltage":225,"Current":0.197}}
08:00:34.168 MQT: tele/tasmota_26536D/STATE = {"Time":"2023-11-06T08:00:34","Uptime":"0T12:14:08","UptimeSec":44048,"Heap":20,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":3,"POWER":"ON","Wifi":{"AP":1,"SSId":"Palatina","BSSId":"5C:49:79:55:9E:DC","Channel":4,"Mode":"11n","RSSI":86,"Signal":-57,"LinkCount":1,"Downtime":"0T00:00:05"}}
08:00:34.184 MQT: tele/tasmota_26536D/SENSOR = {"Time":"2023-11-06T08:00:34","ENERGY":{"TotalStartTime":"2020-01-07T09:52:26","Total":0.823,"Yesterday":0.600,"Today":0.223,"Period":0,"Power":15,"ApparentPower":45,"ReactivePower":42,"Factor":0.33,"Voltage":225,"Current":0.198}}
08:01:24.130 MQT: tele/tasmota_26536D/STATE = {"Time":"2023-11-06T08:01:24","Uptime":"0T12:14:58","UptimeSec":44098,"Heap":20,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":3,"POWER":"ON","Wifi":{"AP":1,"SSId":"Palatina","BSSId":"5C:49:79:55:9E:DC","Channel":4,"Mode":"11n","RSSI":84,"Signal":-58,"LinkCount":1,"Downtime":"0T00:00:05"}}
08:01:24.145 MQT: tele/tasmota_26536D/SENSOR = {"Time":"2023-11-06T08:01:24","ENERGY":{"TotalStartTime":"2020-01-07T09:52:26","Total":0.826,"Yesterday":0.600,"Today":0.226,"Period":3,"Power":15,"ApparentPower":45,"ReactivePower":43,"Factor":0.32,"Voltage":224,"Current":0.202}}
08:02:14.167 MQT: tele/tasmota_26536D/STATE = {"Time":"2023-11-06T08:02:14","Uptime":"0T12:15:48","UptimeSec":44148,"Heap":20,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":3,"POWER":"ON","Wifi":{"AP":1,"SSId":"Palatina","BSSId":"5C:49:79:55:9E:DC","Channel":4,"Mode":"11n","RSSI":78,"Signal":-61,"LinkCount":1,"Downtime":"0T00:00:05"}}
08:02:14.182 MQT: tele/tasmota_26536D/SENSOR = {"Time":"2023-11-06T08:02:14","ENERGY":{"TotalStartTime":"2020-01-07T09:52:26","Total":0.830,"Yesterday":0.600,"Today":0.230,"Period":3,"Power":11,"ApparentPower":45,"ReactivePower":44,"Factor":0.24,"Voltage":225,"Current":0.201}}
08:03:04.125 MQT: tele/tasmota_26536D/STATE = {"Time":"2023-11-06T08:03:04","Uptime":"0T12:16:38","UptimeSec":44198,"Heap":20,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":3,"POWER":"ON","Wifi":{"AP":1,"SSId":"Palatina","BSSId":"5C:49:79:55:9E:DC","Channel":4,"Mode":"11n","RSSI":84,"Signal":-58,"LinkCount":1,"Downtime":"0T00:00:05"}}
08:03:04.141 MQT: tele/tasmota_26536D/SENSOR = {"Time":"2023-11-06T08:03:04","ENERGY":{"TotalStartTime":"2020-01-07T09:52:26","Total":0.833,"Yesterday":0.600,"Today":0.233,"Period":3,"Power":16,"ApparentPower":48,"ReactivePower":45,"Factor":0.33,"Voltage":224,"Current":0.214}}
08:03:54.149 MQT: tele/tasmota_26536D/STATE = {"Time":"2023-11-06T08:03:54","Uptime":"0T12:17:28","UptimeSec":44248,"Heap":20,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":3,"POWER":"ON","Wifi":{"AP":1,"SSId":"Palatina","BSSId":"5C:49:79:55:9E:DC","Channel":4,"Mode":"11n","RSSI":74,"Signal":-63,"LinkCount":1,"Downtime":"0T00:00:05"}}
08:03:54.164 MQT: tele/tasmota_26536D/SENSOR = {"Time":"2023-11-06T08:03:54","ENERGY":{"TotalStartTime":"2020-01-07T09:52:26","Total":0.842,"Yesterday":0.600,"Today":0.242,"Period":9,"Power":798,"ApparentPower":798,"ReactivePower":0,"Factor":1.00,"Voltage":223,"Current":3.581}}
08:04:44.130 MQT: tele/tasmota_26536D/STATE = {"Time":"2023-11-06T08:04:44","Uptime":"0T12:18:18","UptimeSec":44298,"Heap":20,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":3,"POWER":"ON","Wifi":{"AP":1,"SSId":"Palatina","BSSId":"5C:49:79:55:9E:DC","Channel":4,"Mode":"11n","RSSI":86,"Signal":-57,"LinkCount":1,"Downtime":"0T00:00:05"}}
08:04:44.146 MQT: tele/tasmota_26536D/SENSOR = {"Time":"2023-11-06T08:04:44","ENERGY":{"TotalStartTime":"2020-01-07T09:52:26","Total":0.849,"Yesterday":0.600,"Today":0.249,"Period":7,"Power":13,"ApparentPower":48,"ReactivePower":46,"Factor":0.27,"Voltage":225,"Current":0.212}}
08:05:34.141 MQT: tele/tasmota_26536D/STATE = {"Time":"2023-11-06T08:05:34","Uptime":"0T12:19:08","UptimeSec":44348,"Heap":20,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":3,"POWER":"ON","Wifi":{"AP":1,"SSId":"Palatina","BSSId":"5C:49:79:55:9E:DC","Channel":4,"Mode":"11n","RSSI":84,"Signal":-58,"LinkCount":1,"Downtime":"0T00:00:05"}}
08:05:34.156 MQT: tele/tasmota_26536D/SENSOR = {"Time":"2023-11-06T08:05:34","ENERGY":{"TotalStartTime":"2020-01-07T09:52:26","Total":0.852,"Yesterday":0.600,"Today":0.252,"Period":3,"Power":12,"ApparentPower":48,"ReactivePower":47,"Factor":0.24,"Voltage":224,"Current":0.215}}
08:06:24.152 MQT: tele/tasmota_26536D/STATE = {"Time":"2023-11-06T08:06:24","Uptime":"0T12:19:58","UptimeSec":44398,"Heap":20,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":3,"POWER":"ON","Wifi":{"AP":1,"SSId":"Palatina","BSSId":"5C:49:79:55:9E:DC","Channel":4,"Mode":"11n","RSSI":80,"Signal":-60,"LinkCount":1,"Downtime":"0T00:00:05"}}
08:06:24.167 MQT: tele/tasmota_26536D/SENSOR = {"Time":"2023-11-06T08:06:24","ENERGY":{"TotalStartTime":"2020-01-07T09:52:26","Total":0.856,"Yesterday":0.600,"Today":0.256,"Period":3,"Power":50,"ApparentPower":50,"ReactivePower":0,"Factor":1.00,"Voltage":225,"Current":0.222}}
08:07:14.130 MQT: tele/tasmota_26536D/STATE = {"Time":"2023-11-06T08:07:14","Uptime":"0T12:20:48","UptimeSec":44448,"Heap":20,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":3,"POWER":"ON","Wifi":{"AP":1,"SSId":"Palatina","BSSId":"5C:49:79:55:9E:DC","Channel":4,"Mode":"11n","RSSI":76,"Signal":-62,"LinkCount":1,"Downtime":"0T00:00:05"}}
08:07:14.145 MQT: tele/tasmota_26536D/SENSOR = {"Time":"2023-11-06T08:07:14","ENERGY":{"TotalStartTime":"2020-01-07T09:52:26","Total":0.863,"Yesterday":0.600,"Today":0.263,"Period":8,"Power":846,"ApparentPower":846,"ReactivePower":0,"Factor":1.00,"Voltage":222,"Current":3.806}}
08:08:04.125 MQT: tele/tasmota_26536D/STATE = {"Time":"2023-11-06T08:08:04","Uptime":"0T12:21:38","UptimeSec":44498,"Heap":20,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":3,"POWER":"ON","Wifi":{"AP":1,"SSId":"Palatina","BSSId":"5C:49:79:55:9E:DC","Channel":4,"Mode":"11n","RSSI":72,"Signal":-64,"LinkCount":1,"Downtime":"0T00:00:05"}}
08:08:04.141 MQT: tele/tasmota_26536D/SENSOR = {"Time":"2023-11-06T08:08:04","ENERGY":{"TotalStartTime":"2020-01-07T09:52:26","Total":0.872,"Yesterday":0.600,"Today":0.272,"Period":8,"Power":851,"ApparentPower":851,"ReactivePower":0,"Factor":1.00,"Voltage":222,"Current":3.827}}
08:08:54.164 MQT: tele/tasmota_26536D/STATE = {"Time":"2023-11-06T08:08:54","Uptime":"0T12:22:28","UptimeSec":44548,"Heap":20,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":3,"POWER":"ON","Wifi":{"AP":1,"SSId":"Palatina","BSSId":"5C:49:79:55:9E:DC","Channel":4,"Mode":"11n","RSSI":84,"Signal":-58,"LinkCount":1,"Downtime":"0T00:00:05"}}
08:08:54.180 MQT: tele/tasmota_26536D/SENSOR = {"Time":"2023-11-06T08:08:54","ENERGY":{"TotalStartTime":"2020-01-07T09:52:26","Total":0.877,"Yesterday":0.600,"Today":0.277,"Period":6,"Power":14,"ApparentPower":49,"ReactivePower":47,"Factor":0.28,"Voltage":223,"Current":0.219}}
08:09:44.147 MQT: tele/tasmota_26536D/STATE = {"Time":"2023-11-06T08:09:44","Uptime":"0T12:23:18","UptimeSec":44598,"Heap":20,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":3,"POWER":"ON","Wifi":{"AP":1,"SSId":"Palatina","BSSId":"5C:49:79:55:9E:DC","Channel":4,"Mode":"11n","RSSI":86,"Signal":-57,"LinkCount":1,"Downtime":"0T00:00:05"}}
08:09:44.161 MQT: tele/tasmota_26536D/SENSOR = {"Time":"2023-11-06T08:09:44","ENERGY":{"TotalStartTime":"2020-01-07T09:52:26","Total":0.881,"Yesterday":0.600,"Today":0.281,"Period":4,"Power":13,"ApparentPower":47,"ReactivePower":45,"Factor":0.28,"Voltage":225,"Current":0.210}}
08:10:34.155 MQT: tele/tasmota_26536D/STATE = {"Time":"2023-11-06T08:10:34","Uptime":"0T12:24:08","UptimeSec":44648,"Heap":20,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":3,"POWER":"ON","Wifi":{"AP":1,"SSId":"Palatina","BSSId":"5C:49:79:55:9E:DC","Channel":4,"Mode":"11n","RSSI":84,"Signal":-58,"LinkCount":1,"Downtime":"0T00:00:05"}}
08:10:34.171 MQT: tele/tasmota_26536D/SENSOR = {"Time":"2023-11-06T08:10:34","ENERGY":{"TotalStartTime":"2020-01-07T09:52:26","Total":0.884,"Yesterday":0.600,"Today":0.284,"Period":3,"Power":13,"ApparentPower":46,"ReactivePower":44,"Factor":0.27,"Voltage":225,"Current":0.202}}
08:11:24.141 MQT: tele/tasmota_26536D/STATE = {"Time":"2023-11-06T08:11:24","Uptime":"0T12:24:58","UptimeSec":44698,"Heap":20,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":3,"POWER":"ON","Wifi":{"AP":1,"SSId":"Palatina","BSSId":"5C:49:79:55:9E:DC","Channel":4,"Mode":"11n","RSSI":86,"Signal":-57,"LinkCount":1,"Downtime":"0T00:00:05"}}
08:11:24.156 MQT: tele/tasmota_26536D/SENSOR = {"Time":"2023-11-06T08:11:24","ENERGY":{"TotalStartTime":"2020-01-07T09:52:26","Total":0.887,"Yesterday":0.600,"Today":0.287,"Period":3,"Power":10,"ApparentPower":45,"ReactivePower":44,"Factor":0.21,"Voltage":225,"Current":0.202}}
08:12:14.172 MQT: tele/tasmota_26536D/STATE = {"Time":"2023-11-06T08:12:14","Uptime":"0T12:25:48","UptimeSec":44748,"Heap":20,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":3,"POWER":"ON","Wifi":{"AP":1,"SSId":"Palatina","BSSId":"5C:49:79:55:9E:DC","Channel":4,"Mode":"11n","RSSI":86,"Signal":-57,"LinkCount":1,"Downtime":"0T00:00:05"}}
08:12:14.187 MQT: tele/tasmota_26536D/SENSOR = {"Time":"2023-11-06T08:12:14","ENERGY":{"TotalStartTime":"2020-01-07T09:52:26","Total":0.890,"Yesterday":0.600,"Today":0.290,"Period":2,"Power":797,"ApparentPower":797,"ReactivePower":0,"Factor":1.00,"Voltage":223,"Current":3.569}}
08:13:04.151 MQT: tele/tasmota_26536D/STATE = {"Time":"2023-11-06T08:13:04","Uptime":"0T12:26:38","UptimeSec":44798,"Heap":20,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":3,"POWER":"ON","Wifi":{"AP":1,"SSId":"Palatina","BSSId":"5C:49:79:55:9E:DC","Channel":4,"Mode":"11n","RSSI":84,"Signal":-58,"LinkCount":1,"Downtime":"0T00:00:05"}}

Wie man sehen kann sind die Werte drin und ändern sich auch. Leider nicht im ioBroker.

[Ralla66]

@ralfth

Puh, da die Daten ja auch nicht in der Tasmota Web GUI "Tasmota Kaffeemaschine" angezeigt werden
vermute ich das dein Template nicht ganz richtig ist. Für die Gosund SP111 gibt es ja verschiedene.
Sollte das mit wechseln der Template nicht funktionieren wird das an der .bin liegen.
Welche Tasmota .bin hast du den geflasht ? Die Sensor.bin ?

[RalfTh]

@ralla66 sagte in Gosund SP111 mit Tasmota 13.2.0 Porblem mit DP:

@ralfth

Puh, da die Daten ja auch nicht in der Tasmota Web GUI "Tasmota Kaffeemaschine" angezeigt werden
vermute ich das dein Template nicht ganz richtig ist. Für die Gosund SP111 gibt es ja verschiedene.
Sollte das mit wechseln der Template nicht funktionieren wird das an der .bin liegen.
Welche Tasmota .bin hast du den geflasht ? Die Sensor.bin ?

Das werden sie doch aber, schau mal "Power", "ApparentPower" und "ReactivePower".
Genau das sind die Werte.

Geflasht habe ich über die offizielle Tasmota-Seite

Und hier habe ich http://ota.tasmota.com/tasmota/release/tasmota-DE.bin.gz verwendet

[Ralla66]

@ralfth

die Gosund waren schon immer anspruchsvoll zu flashen.
Vermutlich die falsche Tasmota.bin.
Würde die Sensor.bin nehmen oder mal Tante Google befragen.
Und immer schön den Flash löschen.

[RalfTh]

@ralla66 Was meinst du mit Flash löschen? Ich bin da kein Spezialist.

[Ralla66]

@ralfth

Damit keine Datenrestbestände im Speicher verbleiben löscht man diese Daten vorher.
Bei OTA werden die Daten meist nur überschrieben. Besser ist du nimmst den Tasmota Online Installer
oder flasht per FTDI.

[RalfTh]

@ralla66 sagte in Gosund SP111 mit Tasmota 13.2.0 Porblem mit DP:

@ralfth

Damit keine Datenrestbestände im Speicher verbleiben löscht man diese Daten vorher.
Bei OTA werden die Daten meist nur überschrieben. Besser ist du nimmst den Tasmota Online Installer
oder flasht per FTDI.

FTDI fällt flach, da ich keine entsprechende Ausrüstung habe und die neueren Steckdosen geklebt sind.
Den Tasmota Online Installer kenne ich nicht und habe bis jetzt auch nicht rausbekommen wie er funktioniert. Gibt es dazu ne Anleitung?
Ursprünglich hatte ich mir diese Steckdosen gekauft weil man sie über OTA flashen kann.

[Ralla66]

@ralfth

dann probiere es mit OTA

[RalfTh]

Hat jemand für die Gosund SP111 ein Template, das mit Tasmota 13.2.0 funktioniert?
Wenn nein, mit welcher Tasmota-Version und welchem Template funktioniert es bei euch?

Ich habe da jetzt einiges probiert.
Die Vorlagen von Blakadder werden beim speichern konvertiert. Konkret dürfte es sich dabei um die Werte der GPIO 4,5 und 12 handeln.

Das Template von Blakadder für die Gosund SP111 mit 3450 Watt lautet:

{"NAME":"Gosund SP111 v1.1","GPIO":[56,0,158,0,132,134,0,0,131,17,0,21,0],"FLAG":0,"BASE":45}

Dies wird bei mir nach dem speichern in das umgewandelt:

{"NAME":"Gosund SP111 v1.1","GPIO":[320,0,576,0,2656,2720,0,0,2624,32,0,224,0,0],"FLAG":0,"BASE":45}

Das wesentliche Problem dabei scheint zu sein, dass die DP im ioBroker angelegt, aber nur einmal aktualisiert werden. Verwende ich die Powertaste auf der Weboberfläche der Gosund so wird der DP im ioBroker nicht aktualisiert. Ich kann jedoch sehr wohl den DP "Power" im ioBroker ändern und der steuert die Gosund entsprechend.

Das ist alles sehr verwirrend.

[Ralla66]

@ralfth sagte in Gosund SP111 mit Tasmota 13.2.0 Porblem mit DP:

Dies wird bei mir nach dem speichern in das umgewandelt:

das ist wohl der Fehler,
wenn in other Parameters das neue Template eingefügt und Aktiviert wird
ist das neue Template nach einem reboot aktiv.

[RalfTh]

@ralla66 das hilft mir jetzt nicht so recht weiter, Denn genau bei dem von dir beschriebenen Vorgang passiert ja das oben geschilderte. D.h. Tasmota konvertiert das selbstständig auf die neuen Werte.

[Ralla66]

@ralfth

ok, dann kann ich nur anbieten das heute Abend mal auf einem ESP8266 / 32 zu testen.
Mal die Sensor.bin geflasht und unter Info mal geschaut ob die auch geflasht wurde ?
Mal einen Reset über Taster oder so getestet ?

[Ralla66]

@ralfth

getestet auf ESP 8266 Tasmota 13.2 -> laufen alle Template

umgeschrieben wird das Template auch.

2656 ist HLWBL CF1 HLW8012/HJL-01/BL0937 energy monitoring
erst einmal nicht verkehrt.

[RalfTh]

@ralla66 So sieht das bei mir auch aus. wenn ich das allerdings über MQTT in den Sonoff-Adapter mit der Version 2.5.3 einbinde, dann werden dor die DP'S nicht aktualisiert. Aus dem LOG kan ich sehen, dass die Werte auch nicht geliefert werden.

Beispiel:
die Weboberfläche des Gosund zeigt eine aktualle Leistung von 800 Watt und geliefert wird über MQTT an die Sonoff-Instanz 0 Watt.

Bin gerade dabei einen Mosquitto zu installieren und einzubinden, um zu sehen ob das dort genauso ist. Wenn ja, stimmt etwas bei Tasmota nicht, wenn nein stimmt etwas bei dem Sonoff-Adapter nicht. Mal sehen.

Lieferst du die Werte in eine Sonoff-Adapter-Instanz? Wenn ja wie sehen die aus? Passt das zu der Weboberfläche der Gosund?

[Ralla66]

@ralfth

kannst aber auch Adapter Mqtt als Broker nehmen mit Port 1883.
Das sollte auch mit Tasmota laufen.
Wenn in der Tasmota Console tele die Daten gesendet werden und nix im Sonoff
Adapter erscheint stimmt die Verbindung nicht, PW , Port oder so.

[RalfTh]

@ralla66 Kommando zurück, es gibt Unterschiede.

Ich habe diese Datei geflasht: http://ota.tasmota.com/tasmota/release/tasmota-sensors.bin.gz

In der Info zu sehen:

In der ersten Zeile steht bei mir 13.2.0(sensors) und bei dir steht 13.2.0(tasmota).??
Hast du wirklich diese sensors.bin geflasht?

Ich musste das Template V1.1 verwenden, da meine Gosund eine mit 3450 Watt Leistung ist. Mit dem V1.4 bekomme ich keine Leistungsanzeige auf der Webogerfläche der Gosund.

[Ralla66]

@ralfth

wenn auf der Weboberfläche Werte erscheinen liest der ja die Daten.
Dann prüfe ob Daten per Tasmota Konsole gesendet werden.

[Ralla66]

@ralfth

im Sonoff Adapter hast du alle Haken gesetzt ?

[RalfTh]

@ralla66 Das sind die Daten auf der Weboberfläche:

06:39:57.228 MQT: stat/tasmota/RESULT = {"POWER":"ON"}
06:39:57.231 MQT: stat/tasmota/POWER = ON
06:40:05.762 MQT: tele/tasmota/STATE = {"Time":"2023-11-08T06:40:05","Uptime":"0T10:51:37","UptimeSec":39097,"Heap":18,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":4,"POWER":"ON","Wifi":{"AP":1,"SSId":"Palatina","BSSId":"5C:49:79:55:9E:DC","Channel":4,"Mode":"11n","RSSI":70,"Signal":-65,"LinkCount":1,"Downtime":"0T00:00:06"}}
06:40:05.774 MQT: tele/tasmota/SENSOR = {"Time":"2023-11-08T06:40:05","ENERGY":{"TotalStartTime":"2020-06-30T13:38:42","Total":0.043,"Yesterday":0.040,"Today":0.003,"Period":0,"Power":42,"ApparentPower":42,"ReactivePower":0,"Factor":1.00,"Voltage":232,"Current":0.182}}
06:40:15.730 MQT: tele/tasmota/STATE = {"Time":"2023-11-08T06:40:15","Uptime":"0T10:51:47","UptimeSec":39107,"Heap":18,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":4,"POWER":"ON","Wifi":{"AP":1,"SSId":"Palatina","BSSId":"5C:49:79:55:9E:DC","Channel":4,"Mode":"11n","RSSI":70,"Signal":-65,"LinkCount":1,"Downtime":"0T00:00:06"}}
06:40:15.742 MQT: tele/tasmota/SENSOR = {"Time":"2023-11-08T06:40:15","ENERGY":{"TotalStartTime":"2020-06-30T13:38:42","Total":0.043,"Yesterday":0.040,"Today":0.003,"Period":0,"Power":42,"ApparentPower":42,"ReactivePower":0,"Factor":1.00,"Voltage":232,"Current":0.181}}
06:40:21.954 MQT: stat/tasmota/RESULT = {"POWER":"OFF"}
06:40:21.957 MQT: stat/tasmota/POWER = OFF
06:40:25.762 MQT: tele/tasmota/STATE = {"Time":"2023-11-08T06:40:25","Uptime":"0T10:51:57","UptimeSec":39117,"Heap":18,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":4,"POWER":"OFF","Wifi":{"AP":1,"SSId":"Palatina","BSSId":"5C:49:79:55:9E:DC","Channel":4,"Mode":"11n","RSSI":72,"Signal":-64,"LinkCount":1,"Downtime":"0T00:00:06"}}
06:40:25.774 MQT: tele/tasmota/SENSOR = {"Time":"2023-11-08T06:40:25","ENERGY":{"TotalStartTime":"2020-06-30T13:38:42","Total":0.043,"Yesterday":0.040,"Today":0.003,"Period":0,"Power":6,"ApparentPower":6,"ReactivePower":0,"Factor":1.00,"Voltage":232,"Current":0.024}}

Nachdem ich erst die Instanz auf Loglevel "Debug" umstellen musste, um diese Info zu bekommen stimmt der Timestamp nicht ganz überein. Aber ich gehe davon aus, dass dies von untergeordneter Rolle ist.

sonoff.0
2023-11-08 06:43:56.521	debug	[Reserve2] Received: tele/tasmota/SENSOR = {"Time":"2023-11-08T06:43:55","ENERGY":{"TotalStartTime":"2020-06-30T13:38:42","Total":0.043,"Yesterday":0.040,"Today":0.003,"Period":0,"Power":0,"ApparentPower":0,"ReactivePower":0,"Factor":0.00,"Voltage":232,"Current":0.000}}

sonoff.0
2023-11-08 06:43:46.509	debug	[Reserve2] Received: tele/tasmota/SENSOR = {"Time":"2023-11-08T06:43:45","ENERGY":{"TotalStartTime":"2020-06-30T13:38:42","Total":0.043,"Yesterday":0.040,"Today":0.003,"Period":0,"Power":0,"ApparentPower":5,"ReactivePower":5,"Factor":0.04,"Voltage":231,"Current":0.022}}

sonoff.0
2023-11-08 06:43:36.526	debug	[Reserve2] Received: tele/tasmota/SENSOR = {"Time":"2023-11-08T06:43:35","ENERGY":{"TotalStartTime":"2020-06-30T13:38:42","Total":0.043,"Yesterday":0.040,"Today":0.003,"Period":0,"Power":38,"ApparentPower":42,"ReactivePower":17,"Factor":0.91,"Voltage":231,"Current":0.182}}

sonoff.0
2023-11-08 06:43:26.516	debug	[Reserve2] Received: tele/tasmota/SENSOR = {"Time":"2023-11-08T06:43:25","ENERGY":{"TotalStartTime":"2020-06-30T13:38:42","Total":0.043,"Yesterday":0.040,"Today":0.003,"Period":0,"Power":42,"ApparentPower":42,"ReactivePower":0,"Factor":1.00,"Voltage":231,"Current":0.181}}

Eindeutig zu sehen ist, dass die Zustandsänderung der Leistung im Adapter ankommt. Allerdings wird der Objektbaum nicht aktualisiert. Es ändert sich auch nichts, wenn ich diesen lösche und neu erstellen lasse.
Die Haken im Adapter sind gesetzt.

Die Frage ist was tun?? Den Adapter löschen und neu installieren? Der Rücksprung auf eine ältere Version?

[Ralla66]

@ralfth

Zuerst den Timestamp der Maschinen richtig stellen.
"TotalStartTime":"2020-06-30T13:38:42"
Bist ja noch im Jahr 2020

Teste Konsole Tasmota,
Timezone 99 oder
Europe/Berlin: Backlog0 Timezone 99; TimeStd 0,0,10,1,3,60; TimeDst 0,0,3,1,2,120

Testmöglichkeiten :

Adapter Mqtt als Broker installieren,
Port 1883 ist default
Name,User und PW usw eintragen

Sonoffadapter
Port 1886 und 3 Haken
Name,User und PW usw eintragen

Tasmota Mqtt
Daten eintragen ohne Sonderzeichen,
IP ist die vom Broker
Port je nach Broker
zum Test:
Name: Test
User: Admin
PW: 12345
Alles auf default lassen, Topic, Fulltopic.
Telemetrie mal auf 15 stellen

Testen mit Sonoff Adapter:
Port Sonoff Adapter und Tasmota ist 1886.
SP111 und Adapter neu starten, Adapter wird Grün,
Datenpunkte werden angelegt, Daten erscheinen

Testen mit Mqtt Adapter:
Port Mqtt Adapter und Tasmota ist 1883.
SP111 und Adapter neu starten, Adapter wird Grün,
Datenpunkte werden angelegt, Daten erscheinen

When EnergyReset3 0 is executed the total energy is reset but the daily energy is not hence the TotalStartTime should be set to midnight unless daily energy is zero where it will be set to current time.

When EnergyReset1 0 is executed the daily energy is reset but if there is still a total energy present it will not change TotalStartTime. When on the other hand the total energy is zero and the daily energy is also set to zero it will set TotalStartTime to current time. If total energy is zero and daily energy is set to a non-zero value the TotalStartTime is again not changed.