Zigbee Stick spinnt *gelöst*
-
@phantomkommander sagte in Zigbee Stick spinnt:
ah ok, hatte ich nicht mitbekommen.
Das udev Problem hatte ich auch, allerdings auf einem bullseye 32-Bit System auf dem Raspberrypi.
Seit 64-Bit bookworm ist das Geschichte.
-
Konsole will er scheinbar nicht... sagt das es schon installiert ist... Die Kachel habe ich merkwürdigerweise nicht...
-
@gluecksmann sagte in Zigbee Stick spinnt:
onsole will er scheinbar nicht...
Das scheint ein Verständnisproblem zu sein. Mit Konsole meine ich über ssh (Putty oder sonstwas) auf dem iob-Server einloggen und den Befehl eingeben.
-
adapter "zigbee" already installed. Use "upgrade" to upgrade to a newer version. -
Bitte immer komplette Ein- und Ausgaben der Konsole in
CodeTagssonst kann hier keiner sehen, was Du machst und was das Ergebnis ist! -
@gluecksmann sagte in Zigbee Stick spinnt:
Use "upgrade" to upgrade to a newer version.
Dann versuch mal
iobroker upgrade zigbee@1.8.24, steht ja da. -
pi@raspberrypi:~ $ iobroker install zigbee@1.8.24 adapter "zigbee" already installed. Use "upgrade" to upgrade to a newer version. -
Manchmal ist es lo einfach... mal sehen ob das die Probleme löst...
aktuell installiert er noch... beunruhigend lange...
-
So, nun komme ich leider nicht mehr an die Hauptseite vom IOBroker ran...per Putty scheint es noch erreichbar zu sein...
Jemand einen hilfreichen Befehl?
-
@gluecksmann sagte in Zigbee Stick spinnt:
So, nun komme ich leider nicht mehr an die Hauptseite vom IOBroker ran.
und was heisst das? Welche Fehlermeldung bekommst du?
-
Firefox kann keine Verbindung zu dem Server unter 192.168.2.105:8081 aufbauen.
-
Was sagt denn
iob diagdazu läuft der Admin ? -
@frank579 sagte in Zigbee Stick spinnt:
iob diag
Core adapters versions js-controller: 5.0.17 admin: "admin" not found javascript: "javascript" not found -
Zeige mal bitte die Ganze Full ausgabe davon , nicht nur ein Schnipsel , sieht schon merkwürdig aus .
vorher noch
sudo rebootdann
iob diag -
Skript v.2023-10-10 *** BASE SYSTEM *** Static hostname: raspberrypi Icon name: computer Operating System: Raspbian GNU/Linux 10 (buster) Kernel: Linux 5.10.103-v7l+ Architecture: arm Model : Raspberry Pi 4 Model B Rev 1.4 Docker : false Virtualization : none Kernel : armv7l Userland : armhf Systemuptime and Load: 14:15:23 up 3 min, 1 user, load average: 1.50, 1.08, 0.47 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Thu 2023-12-28 14:15:23 CET Universal time: Thu 2023-12-28 13:15:23 UTC RTC time: n/a Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input netdev lpadmin gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 7.9G 1.2G 6.4G 8.0M 316M 6.5G Swap: 99M 0B 99M Total: 8.0G 1.2G 6.5G 7898 M total memory 1153 M used memory 149 M active memory 1229 M inactive memory 6428 M free memory 53 M buffer memory 263 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * lightdm.service loaded failed failed Light Display Manager LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 1 loaded units listed. Pass --all to see loaded but inactive units, too. To show all installed unit files use 'systemctl list-unit-files'. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 29G 14G 15G 50% / devtmpfs devtmpfs 3.7G 0 3.7G 0% /dev tmpfs tmpfs 3.9G 0 3.9G 0% /dev/shm tmpfs tmpfs 3.9G 8.5M 3.9G 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock tmpfs tmpfs 3.9G 0 3.9G 0% /sys/fs/cgroup /dev/mmcblk0p1 vfat 253M 49M 204M 20% /boot tmpfs tmpfs 790M 0 790M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Thu Dec 28 14:11:43 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=E4:5F:01:3D:9B:6E vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=a372f35c-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [Thu Dec 28 14:11:44 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [Thu Dec 28 14:11:44 2023] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Thu Dec 28 14:11:46 2023] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime |-/sys/fs/bpf none bpf rw,nosuid,nodev,noexec,relatime,mode=700 `-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 412M /var/ 118M /var/lib 102M /var/cache 90M /var/cache/apt 89M /var/log Archived and active journals take up 8.0M in the file system. /opt/iobroker/backups: 60M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 616M /opt/iobroker/iobroker-data/ 329M /opt/iobroker/iobroker-data/files 143M /opt/iobroker/iobroker-data/backup-objects 93M /opt/iobroker/iobroker-data/sonosCache 67M /opt/iobroker/iobroker-data/files/javascript.admin The five largest files in iobroker-data are: 35M /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map 33M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js.map 21M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.aaea95f8.js.map 15M /opt/iobroker/iobroker-data/objects.jsonl 12M /opt/iobroker/iobroker-data/objects.json.migrated USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B001CDD3388-if00 *** NodeJS-Installation *** /usr/bin/nodejs v18.19.0 /usr/bin/node v18.19.0 /usr/bin/npm 10.2.3 /usr/bin/npx 10.2.3 /usr/bin/corepack 0.22.0 nodejs: Installed: 18.19.0-1nodesource1 Candidate: 18.19.0-1nodesource1 Version table: *** 18.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 100 /var/lib/dpkg/status 18.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.16.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.9.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 10.24.0~dfsg-1~deb10u3 500 500 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: npm ERR! code ELSPROBLEMS npm ERR! invalid: iobroker.govee@0.0.5 /opt/iobroker/node_modules/iobroker.govee npm ERR! invalid: iobroker.icons-ultimate-png@1.0.1 /opt/iobroker/node_modules/iobroker.icons-ultimate-png npm ERR! A complete log of this run can be found in: /home/pi/.npm/_logs/2023-12-28T13_15_38_542Z-debug-0.log *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.17 admin: 6.12.0 javascript: 7.1.6 npm ERR! code ELSPROBLEMS npm ERR! invalid: iobroker.govee@0.0.5 /opt/iobroker/node_modules/iobroker.govee npm ERR! invalid: iobroker.icons-ultimate-png@1.0.1 /opt/iobroker/node_modules/iobroker.icons-ultimate-png npm ERR! A complete log of this run can be found in: /home/pi/.npm/_logs/2023-12-28T13_16_01_385Z-debug-0.log Adapters from github: 2 Adapter State system.adapter.admin.0 : admin : raspberrypi - disabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : raspberrypi - enabled system.adapter.alias-manager.0 : alias-manager : raspberrypi - disabled system.adapter.awtrix-light.0 : awtrix-light : raspberrypi - disabled + system.adapter.backitup.0 : backitup : raspberrypi - enabled + system.adapter.ble.0 : ble : raspberrypi - enabled system.adapter.chromecast.0 : chromecast : raspberrypi - disabled system.adapter.daswetter.0 : daswetter : raspberrypi - enabled system.adapter.devices.0 : devices : raspberrypi - disabled + system.adapter.discovery.0 : discovery : raspberrypi - enabled system.adapter.dwd.0 : dwd : raspberrypi - enabled + system.adapter.fullybrowser.0 : fullybrowser : raspberrypi - enabled + system.adapter.govee.0 : govee : raspberrypi - enabled + system.adapter.gruenbeck.0 : gruenbeck : raspberrypi - enabled system.adapter.history.0 : history : raspberrypi - disabled + system.adapter.hue.0 : hue : raspberrypi - enabled, port: 443 system.adapter.ical.0 : ical : raspberrypi - enabled system.adapter.icons-mfd-png.0 : icons-mfd-png : raspberrypi - disabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : raspberrypi - disabled system.adapter.icons-ultimate-png.0 : icons-ultimate-png : raspberrypi - disabled + system.adapter.info.0 : info : raspberrypi - enabled + system.adapter.iot.0 : iot : raspberrypi - enabled + system.adapter.javascript.0 : javascript : raspberrypi - enabled + system.adapter.meross.0 : meross : raspberrypi - enabled + system.adapter.mielecloudservice.0 : mielecloudservice : raspberrypi - enabled + system.adapter.musiccast.0 : musiccast : raspberrypi - enabled + system.adapter.net-tools.0 : net-tools : raspberrypi - enabled + system.adapter.netatmo.0 : netatmo : raspberrypi - enabled + system.adapter.philips-air.0 : philips-air : raspberrypi - enabled + system.adapter.philips-air.1 : philips-air : raspberrypi - enabled + system.adapter.ping.0 : ping : raspberrypi - enabled + system.adapter.pollenflug.0 : pollenflug : raspberrypi - enabled + system.adapter.scenes.0 : scenes : raspberrypi - enabled + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 system.adapter.shuttercontrol.0 : shuttercontrol : raspberrypi - disabled + system.adapter.smartcontrol.0 : smartcontrol : raspberrypi - enabled + system.adapter.sonoff.0 : sonoff : raspberrypi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.sonos.0 : sonos : raspberrypi - enabled + system.adapter.trashschedule.0 : trashschedule : raspberrypi - enabled + system.adapter.tuya.0 : tuya : raspberrypi - enabled system.adapter.vis-colorpicker.0 : vis-colorpicker : raspberrypi - enabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : raspberrypi - enabled system.adapter.vis-icontwo.0 : vis-icontwo : raspberrypi - enabled + system.adapter.vis-inventwo.0 : vis-inventwo : raspberrypi - enabled system.adapter.vis-material-advanced.0 : vis-material-advanced : raspberrypi - enabled system.adapter.vis-metro.0 : vis-metro : raspberrypi - enabled system.adapter.vis-players.0 : vis-players : raspberrypi - enabled system.adapter.vis-timeandweather.0 : vis-timeandweather : raspberrypi - enabled system.adapter.vis.0 : vis : raspberrypi - enabled system.adapter.weatherunderground.0 : weatherunderground : raspberrypi - enabled system.adapter.web.0 : web : raspberrypi - disabled, port: 8082, bind: 0.0.0.0, run as: admin system.adapter.zigbee.0 : zigbee : raspberrypi - disabled, port: /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B001CDD3388-if00 + instance is alive Enabled adapters with bindings + system.adapter.hue.0 : hue : raspberrypi - enabled, port: 443 + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : raspberrypi - enabled, port: 1883, bind: 0.0.0.0 ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.12.0 , installed 6.12.0 Adapter "alexa2" : 3.26.3 , installed 3.26.3 Adapter "alias-manager": 1.2.6 , installed 1.2.6 Adapter "awtrix-light" : 0.10.0 , installed 0.10.0 Adapter "backitup" : 2.9.8 , installed 2.9.8 Adapter "ble" : 0.13.4 , installed 0.13.4 Adapter "chromecast" : 3.0.3 , installed 3.0.3 Adapter "daswetter" : 3.1.11 , installed 3.1.11 Adapter "devices" : 1.1.5 , installed 1.1.5 Adapter "discovery" : 4.2.0 , installed 4.2.0 Adapter "dwd" : 2.8.5 , installed 2.8.5 Adapter "fullybrowser" : 3.0.6 , installed 3.0.6 Adapter "gruenbeck" : 0.0.42 , installed 0.0.42 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "hue" : 3.10.1 , installed 3.10.1 Adapter "ical" : 1.13.3 , installed 1.13.3 Adapter "icons-mfd-png": 1.1.0 , installed 1.1.0 Adapter "icons-mfd-svg": 1.1.0 , installed 1.1.0 Adapter "icons-ultimate-png": 1.0.1, installed 1.0.1 Adapter "info" : 2.0.0 , installed 2.0.0 Adapter "iot" : 2.0.11 , installed 2.0.11 Adapter "javascript" : 7.1.6 , installed 7.1.6 Controller "js-controller": 5.0.17 , installed 5.0.17 Adapter "meross" : 1.15.1 , installed 1.15.1 Adapter "mielecloudservice": 6.5.4, installed 6.5.4 Adapter "mihome-vacuum": 4.1.0 , installed 4.1.0 Adapter "musiccast" : 1.1.3 , installed 1.1.3 Adapter "net-tools" : 0.2.0 , installed 0.2.0 Adapter "netatmo" : 3.1.0 , installed 3.1.0 Adapter "philips-air" : 1.0.3 , installed 1.0.3 Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "pollenflug" : 1.0.6 , installed 1.0.6 Adapter "scenes" : 2.3.9 , installed 2.3.9 Adapter "shelly" : 6.6.1 , installed 6.6.1 Adapter "shuttercontrol": 1.6.3 , installed 1.6.3 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "smartcontrol" : 2.0.1 , installed 2.0.1 Adapter "socketio" : 6.6.0 , installed 6.6.0 Adapter "sonoff" : 3.0.3 , installed 3.0.3 Adapter "sonos" : 3.0.0 , installed 3.0.0 Adapter "trashschedule": 2.3.0 , installed 2.3.0 Adapter "tuya" : 3.14.2 , installed 3.14.2 Adapter "vis" : 1.5.4 , installed 1.5.4 Adapter "vis-colorpicker": 2.0.3 , installed 2.0.3 Adapter "vis-hqwidgets": 1.4.0 , installed 1.4.0 Adapter "vis-icontwo" : 1.0.0 , installed 1.0.0 Adapter "vis-inventwo" : 3.3.3 , installed 3.3.3 Adapter "vis-material-advanced": 1.7.4, installed 1.7.4 Adapter "vis-metro" : 1.2.0 , installed 1.2.0 Adapter "vis-players" : 0.1.6 , installed 0.1.6 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "weatherunderground": 3.6.0, installed 3.6.0 Adapter "web" : 6.1.10 , installed 6.1.10 Adapter "ws" : 2.5.8 , installed 2.5.8 Adapter "zigbee" : 1.8.25 , installed 1.8.25 Objects and States Please stand by - This may take a while Objects: 11295 States: 9361 *** OS-Repositories and Updates *** Hit:1 http://raspbian.raspberrypi.org/raspbian buster InRelease Hit:2 http://archive.raspberrypi.org/debian buster InRelease Hit:3 https://deb.nodesource.com/node_18.x nodistro InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 18008 642/sshd tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 14831 363/cupsd tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 20705 999/io.sonoff.0 tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 18400 632/iobroker.js-con tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 19317 632/iobroker.js-con tcp6 0 0 :::22 :::* LISTEN 0 18010 642/sshd tcp6 0 0 ::1:631 :::* LISTEN 0 14830 363/cupsd tcp6 0 0 :::3500 :::* LISTEN 1001 21820 980/io.sonos.0 udp 0 0 0.0.0.0:6666 0.0.0.0:* 1001 19741 1036/io.tuya.0 udp 0 0 0.0.0.0:6667 0.0.0.0:* 1001 19742 1036/io.tuya.0 udp 0 0 0.0.0.0:37928 0.0.0.0:* 1001 21652 911/io.philips-air. udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 21575 856/io.shelly.0 udp 0 0 0.0.0.0:68 0.0.0.0:* 0 18449 631/dhcpcd udp 0 0 0.0.0.0:631 0.0.0.0:* 0 16300 460/cups-browsed udp 0 0 0.0.0.0:41100 0.0.0.0:* 1001 24005 1320/io.musiccast.0 udp 0 0 0.0.0.0:60062 0.0.0.0:* 108 17435 356/avahi-daemon: r udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 17433 356/avahi-daemon: r udp 0 704 0.0.0.0:48886 0.0.0.0:* 1001 21952 1017/io.philips-air udp6 0 0 :::546 :::* 0 18466 631/dhcpcd udp6 0 0 :::5353 :::* 108 17434 356/avahi-daemon: r udp6 0 0 :::39823 :::* 108 17436 356/avahi-daemon: r *** Log File - Last 25 Lines *** 2023-12-28 14:14:31.136 - info: philips-air.0 (911) State value to set for "philips-air.0.status.pm25" has to be type "number" but received type "string" 2023-12-28 14:14:31.153 - info: philips-air.0 (911) State value to set for "philips-air.0.control.timerHours" has to be type "number" but received type "string" 2023-12-28 14:14:31.159 - info: philips-air.0 (911) State value to set for "philips-air.0.status.timerMinutes" has to be type "number" but received type "string" 2023-12-28 14:14:31.175 - info: philips-air.0 (911) State value to set for "philips-air.0.filter.preFilterCleanInHours" has to be type "number" but received type "string" 2023-12-28 14:14:31.181 - info: philips-air.0 (911) State value to set for "philips-air.0.filter.hepaFilterReplaceInHours" has to be type "number" but received type "string" 2023-12-28 14:14:31.187 - info: philips-air.0 (911) State value to set for "philips-air.0.filter.activeCarbonFilterReplaceInHours" has to be type "number" but received type "string" 2023-12-28 14:14:43.281 - warn: sonoff.0 (999) Client [tasmota2] has invalid password or username 2023-12-28 14:15:00.131 - info: host.raspberrypi instance system.adapter.dwd.0 started with pid 3526 2023-12-28 14:15:03.497 - info: dwd.0 (3526) starting. Version 2.8.5 in /opt/iobroker/node_modules/iobroker.dwd, node: v18.19.0, js-controller: 5.0.17 2023-12-28 14:15:04.149 - info: host.raspberrypi instance system.adapter.daswetter.0 started with pid 3748 2023-12-28 14:15:05.756 - info: dwd.0 (3526) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2023-12-28 14:15:06.406 - info: host.raspberrypi instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2023-12-28 14:15:08.046 - info: daswetter.0 (3748) starting. Version 3.1.11 in /opt/iobroker/node_modules/iobroker.daswetter, node: v18.19.0, js-controller: 5.0.17 2023-12-28 14:15:08.160 - info: host.raspberrypi instance system.adapter.weatherunderground.0 started with pid 3830 2023-12-28 14:15:12.777 - info: weatherunderground.0 (3830) starting. Version 3.6.0 in /opt/iobroker/node_modules/iobroker.weatherunderground, node: v18.19.0, js-controller: 5.0.17 2023-12-28 14:15:16.942 - error: weatherunderground.0 (3830) no observations in response from https://api.weather.com/v3/wx/observations/current?apiKey=e1f10a1e78da46f5b10a1e78da96f525&geocode=0%2C0&units=m&language=de&format=json 2023-12-28 14:15:17.338 - error: weatherunderground.0 (3830) WUnderground reported an error: --/{"message":"connect ECONNREFUSED 127.0.0.1:80","name":"Error","stack":"Error: connect ECONNREFUSED 127.0.0.1:80\n at Function.AxiosError.from (/opt/iobroker/node_modules/axios/lib/core/AxiosError.js:89:14)\n at RedirectableRequest.handleRequestError (/opt/iobroker/node_modules/axios/lib/adapters/http.js:606:25)\n at RedirectableRequest.emit (node:events:529:35)\n at RedirectableRequest.emit (node:domain:489:12)\n at ClientRequest.eventHandlers.<computed> (/opt/iobroker/node_modules/follow-redirects/index.js:14:24)\n at ClientRequest.emit (node:events:529:35)\n at ClientRequest.emit (node:domain:489:12)\n at Socket.socketErrorListener (node:_http_client:501:9)\n at Socket.emit (node:events:517:28)\n at Socket.emit (node:domain:489:12)","config":{"transitional":{"silentJSONParsing":true,"forcedJSONParsing":true,"clarifyTimeoutError":false},"adapter":["xhr","http"],"transformRequest":[null],"transformResponse":[null],"timeout":15000,"xsrfCookieName":"XSRF-TOKEN","xsrfHeaderName":"X-XSRF-TOKEN","maxContentLength":-1,"maxBodyLength":-1,"env":{},"headers":{"Accept":"text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8","User-Agent":"Mozilla/5.0 (Windows) Gecko/20100101 Firefox/68.0","Accept-Language":"de-DE,de;q=0.8,en-US;q=0.5,en;q=0.3","Accept-Encoding":"gzip, compress, deflate, br"},"method":"get","url":""},"code":"ECONNREFUSED","status":null} 2023-12-28 14:15:17.344 - error: weatherunderground.0 (3830) No current observation data found in response 2023-12-28 14:15:19.147 - error: weatherunderground.0 (3830) No forecast data found in response 2023-12-28 14:15:21.159 - info: weatherunderground.0 (3830) Terminated (NO_ERROR): Without reason 2023-12-28 14:15:21.703 - info: host.raspberrypi instance system.adapter.weatherunderground.0 terminated with code 0 (NO_ERROR) 2023-12-28 14:15:25.601 - info: daswetter.0 (3748) Terminated (ADAPTER_REQUESTED_TERMINATION): All data handled, adapter stopped until next scheduled moment 2023-12-28 14:15:26.119 - info: daswetter.0 (3748) cleaned everything up... 2023-12-28 14:15:26.137 - info: host.raspberrypi instance system.adapter.daswetter.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2023-12-28 14:16:48.051 - warn: sonoff.0 (999) Client [tasmota2] has invalid password or username -
iob admin start -
sudo systemctl set-default multi-user.targetInstallier die nochmal:
npm ERR! invalid: iobroker.govee@0.0.5 /opt/iobroker/node_modules/iobroker.govee npm ERR! invalid: iobroker.icons-ultimate-png@1.0.1 /opt/iobroker/node_modules/iobroker.icons-ultimate-pngUnd dein Betriebssystem ist tot. Installier da was lebendiges.
-
@thomas-braun sagte in Zigbee Stick spinnt:
sudo systemctl set-default multi-user.target
Hallo, wie DU siehst bin ich da nicht wirklich geschickt... Eine komplette Neuinstallation würde das Forum überfordern... Wenn dann bräuchte ich da auf anderem Wege Support. Komme leider immer noch nicht an die Admin Seite
-
Backup nach extern ziehen, Neuinstallation danach:
https://forum.iobroker.net/topic/51869/installation-auf-raspi-einfacher-geht-s-nicht
Backup wieder einspielen. Fertig. -
Da gibt es ja scheibar mehrere Verisionen..... Was genau ist denn bei mir alt? Mache doch immer Updates? Und wie man ein Update extern sichert habe ich auch noch nicht raus...
