Zigbee Stick spinnt *gelöst*
-
und in den Einstellungen des Adapters steht beim COM-Port das Ergebnis aus
ls -la /dev/serial/by-id/?
Zeige mal die Einstellungen des Adapters...
-
@reutli sagte in Zigbee Stick spinnt:
ls -la /dev/serial/by-id/
pi@raspberrypi:~ $ ls -la /dev/serial/by-id/ insgesamt 0 drwxr-xr-x 2 root root 60 Dez 28 14:11 . drwxr-xr-x 4 root root 80 Dez 28 14:11 .. lrwxrwxrwx 1 root root 13 Dez 28 14:11 usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B001CDD3388-if00 -> ../../ttyACM0 pi@raspberrypi:~ $ -
@gluecksmann sagte in Zigbee Stick spinnt:
@reutli sagte in Zigbee Stick spinnt:
ls -la /dev/serial/by-id/
pi@raspberrypi:~ $ ls -la /dev/serial/by-id/ insgesamt 0 drwxr-xr-x 2 root root 60 Dez 28 14:11 . drwxr-xr-x 4 root root 80 Dez 28 14:11 .. lrwxrwxrwx 1 root root 13 Dez 28 14:11 usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B001CDD3388-if00 -> ../../ttyACM0 pi@raspberrypi:~ $und wo ist
@reutli sagte in Zigbee Stick spinnt:
Zeige mal die Einstellungen des Adapters...
-
Welchen meinst denn jetzt? Zigbee oder den für die Datensicherung?
-
Einstellungen des ZigBee Adapters.
Backup bzw. Restore brauchst Du ja wohl nicht mehr wegen@gluecksmann sagte in Zigbee Stick spinnt:
@gluecksmann
Jetzt wo es scheinbar wieder läuft... -
-
@gluecksmann welche Version vom Zigbee Adapter hast du denn jetzt drauf ?
-
wieder 1.8.25
-
@gluecksmann dann geh mal auf die 1.8.24 nicht das es nur noch daran liegt ..
Und bitte nochmaliob diagKomplett
Der Rest läuft wieder ? -
@gluecksmann sagte in Zigbee Stick spinnt:
wieder 1.8.25
dann wieder zurück!
Bitte in diesem Zuge bzw. danach genau COM-Anschluss prüfen, hattest Du tatsächlich diese erweiterte PAN-ID und PAN-ID bisher auch? -
Du, frag mich nicht... also aktiv habe ich nix geändert...ggf. hat das Update was verbogen?
-
pi@raspberrypi:~ $ iobroker upgrade zigbee@1.8.24 This downgrade of "zigbee" will remove the following changes: ========================================================================== -> 1.8.25 zhc 16.x corr group from exclude dialog ========================================================================== Would you like to downgrade zigbee from @1.8.25 to @1.8.24 now? [(y)es, (n)o]: y Update zigbee from @1.8.25 to @1.8.24 host.raspberrypi Adapter "system.adapter.zigbee.0" is stopped. NPM version: 10.2.3 Installing iobroker.zigbee@1.8.24... (System call)seitdem ruht der See...mal sehen ob da noch was passiert...
-
So, jetzt wieder die früherer Version drauf... aber kommt immer noch die Fehlermeldung wie ganz am Anfang... Einstellungen SInd...
```
code_text -
@gluecksmann jetzt nochmal komplett
iob diag -
@gluecksmann
davor auch mal reboot gemacht???debug modus im Adapter aktivieren...
und dann den Adapter nochmals neustartenund dann
@frank579 sagte in Zigbee Stick spinnt:@gluecksmann jetzt nochmal komplett
iob diag -
*** BASE SYSTEM *** Static hostname: raspberrypi Icon name: computer Operating System: Raspbian GNU/Linux 10 (buster) Kernel: Linux 5.10.103-v7l+ Architecture: arm Model : Raspberry Pi 4 Model B Rev 1.4 Docker : false Virtualization : none Kernel : armv7l Userland : armhf Systemuptime and Load: 17:33:54 up 3:22, 1 user, load average: 0.68, 3.79, 4.41 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Thu 2023-12-28 17:33:54 CET Universal time: Thu 2023-12-28 16:33:54 UTC RTC time: n/a Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input netdev lpadmin gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 7.9G 1.6G 4.9G 8.0M 1.5G 6.1G Swap: 99M 0B 99M Total: 8.0G 1.6G 5.0G 7898 M total memory 1554 M used memory 300 M active memory 2506 M inactive memory 4885 M free memory 184 M buffer memory 1273 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * lightdm.service loaded failed failed Light Display Manager LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 1 loaded units listed. Pass --all to see loaded but inactive units, too. To show all installed unit files use 'systemctl list-unit-files'. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 29G 14G 15G 50% / devtmpfs devtmpfs 3.7G 0 3.7G 0% /dev tmpfs tmpfs 3.9G 0 3.9G 0% /dev/shm tmpfs tmpfs 3.9G 8.5M 3.9G 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock tmpfs tmpfs 3.9G 0 3.9G 0% /sys/fs/cgroup /dev/mmcblk0p1 vfat 253M 49M 204M 20% /boot tmpfs tmpfs 790M 0 790M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Thu Dec 28 14:11:43 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=E4:5F:01:3D:9B:6E vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=a372f35c-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [Thu Dec 28 14:11:44 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [Thu Dec 28 14:11:44 2023] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Thu Dec 28 14:11:46 2023] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime |-/sys/fs/bpf none bpf rw,nosuid,nodev,noexec,relatime,mode=700 `-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 413M /var/ 118M /var/lib 102M /var/cache 91M /var/log 90M /var/cache/apt Archived and active journals take up 8.0M in the file system. /opt/iobroker/backups: 63M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 621M /opt/iobroker/iobroker-data/ 322M /opt/iobroker/iobroker-data/files 143M /opt/iobroker/iobroker-data/backup-objects 93M /opt/iobroker/iobroker-data/sonosCache 67M /opt/iobroker/iobroker-data/files/javascript.admin The five largest files in iobroker-data are: 35M /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map 33M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js.map 30M /opt/iobroker/iobroker-data/objects.jsonl 21M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.aaea95f8.js.map 12M /opt/iobroker/iobroker-data/objects.json.migrated USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B001CDD3388-if00 *** NodeJS-Installation *** /usr/bin/nodejs v18.19.0 /usr/bin/node v18.19.0 /usr/bin/npm 10.2.3 /usr/bin/npx 10.2.3 /usr/bin/corepack 0.22.0 nodejs: Installed: 18.19.0-1nodesource1 Candidate: 18.19.0-1nodesource1 Version table: *** 18.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 100 /var/lib/dpkg/status 18.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.16.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.9.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 10.24.0~dfsg-1~deb10u3 500 500 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: npm ERR! code ELSPROBLEMS npm ERR! invalid: iobroker.govee@0.0.5 /opt/iobroker/node_modules/iobroker.govee npm ERR! A complete log of this run can be found in: /home/pi/.npm/_logs/2023-12-28T16_34_03_703Z-debug-0.log *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.17 admin: 6.12.0 javascript: 7.1.6 npm ERR! code ELSPROBLEMS npm ERR! invalid: iobroker.govee@0.0.5 /opt/iobroker/node_modules/iobroker.govee npm ERR! A complete log of this run can be found in: /home/pi/.npm/_logs/2023-12-28T16_34_25_768Z-debug-0.log Adapters from github: 1 Adapter State + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : raspberrypi - enabled system.adapter.alias-manager.0 : alias-manager : raspberrypi - disabled system.adapter.awtrix-light.0 : awtrix-light : raspberrypi - disabled + system.adapter.backitup.0 : backitup : raspberrypi - enabled + system.adapter.ble.0 : ble : raspberrypi - enabled system.adapter.chromecast.0 : chromecast : raspberrypi - disabled system.adapter.daswetter.0 : daswetter : raspberrypi - enabled system.adapter.devices.0 : devices : raspberrypi - disabled + system.adapter.discovery.0 : discovery : raspberrypi - enabled system.adapter.dwd.0 : dwd : raspberrypi - enabled + system.adapter.fullybrowser.0 : fullybrowser : raspberrypi - enabled + system.adapter.govee.0 : govee : raspberrypi - enabled + system.adapter.gruenbeck.0 : gruenbeck : raspberrypi - enabled system.adapter.history.0 : history : raspberrypi - disabled + system.adapter.hue.0 : hue : raspberrypi - enabled, port: 443 system.adapter.ical.0 : ical : raspberrypi - enabled system.adapter.icons-mfd-png.0 : icons-mfd-png : raspberrypi - disabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : raspberrypi - disabled + system.adapter.info.0 : info : raspberrypi - enabled + system.adapter.iot.0 : iot : raspberrypi - enabled + system.adapter.javascript.0 : javascript : raspberrypi - enabled + system.adapter.meross.0 : meross : raspberrypi - enabled + system.adapter.mielecloudservice.0 : mielecloudservice : raspberrypi - enabled + system.adapter.musiccast.0 : musiccast : raspberrypi - enabled + system.adapter.net-tools.0 : net-tools : raspberrypi - enabled + system.adapter.netatmo.0 : netatmo : raspberrypi - enabled + system.adapter.philips-air.0 : philips-air : raspberrypi - enabled + system.adapter.philips-air.1 : philips-air : raspberrypi - enabled + system.adapter.ping.0 : ping : raspberrypi - enabled + system.adapter.pollenflug.0 : pollenflug : raspberrypi - enabled + system.adapter.scenes.0 : scenes : raspberrypi - enabled + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 system.adapter.shuttercontrol.0 : shuttercontrol : raspberrypi - disabled + system.adapter.smartcontrol.0 : smartcontrol : raspberrypi - enabled + system.adapter.sonoff.0 : sonoff : raspberrypi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.sonos.0 : sonos : raspberrypi - enabled + system.adapter.trashschedule.0 : trashschedule : raspberrypi - enabled + system.adapter.tuya.0 : tuya : raspberrypi - enabled system.adapter.vis-colorpicker.0 : vis-colorpicker : raspberrypi - enabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : raspberrypi - enabled system.adapter.vis-icontwo.0 : vis-icontwo : raspberrypi - enabled + system.adapter.vis-inventwo.0 : vis-inventwo : raspberrypi - enabled system.adapter.vis-material-advanced.0 : vis-material-advanced : raspberrypi - enabled system.adapter.vis-metro.0 : vis-metro : raspberrypi - enabled system.adapter.vis-players.0 : vis-players : raspberrypi - enabled system.adapter.vis-timeandweather.0 : vis-timeandweather : raspberrypi - enabled system.adapter.vis.0 : vis : raspberrypi - enabled system.adapter.weatherunderground.0 : weatherunderground : raspberrypi - enabled + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : raspberrypi - enabled, port: /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B001CDD3388-if00 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.hue.0 : hue : raspberrypi - enabled, port: 443 + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : raspberrypi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : raspberrypi - enabled, port: /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B001CDD3388-if00 ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.12.0 , installed 6.12.0 Adapter "alexa2" : 3.26.3 , installed 3.26.3 Adapter "alias-manager": 1.2.6 , installed 1.2.6 Adapter "awtrix-light" : 0.10.0 , installed 0.10.0 Adapter "backitup" : 2.9.8 , installed 2.9.8 Adapter "ble" : 0.13.4 , installed 0.13.4 Adapter "chromecast" : 3.0.3 , installed 3.0.3 Adapter "daswetter" : 3.1.11 , installed 3.1.11 Adapter "devices" : 1.1.5 , installed 1.1.5 Adapter "discovery" : 4.2.0 , installed 4.2.0 Adapter "dwd" : 2.8.5 , installed 2.8.5 Adapter "fullybrowser" : 3.0.6 , installed 3.0.6 Adapter "gruenbeck" : 0.0.42 , installed 0.0.42 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "hue" : 3.10.1 , installed 3.10.1 Adapter "ical" : 1.13.3 , installed 1.13.3 Adapter "icons-mfd-png": 1.1.0 , installed 1.1.0 Adapter "icons-mfd-svg": 1.1.0 , installed 1.1.0 Adapter "info" : 2.0.0 , installed 2.0.0 Adapter "iot" : 2.0.11 , installed 2.0.11 Adapter "javascript" : 7.1.6 , installed 7.1.6 Controller "js-controller": 5.0.17 , installed 5.0.17 Adapter "meross" : 1.15.1 , installed 1.15.1 Adapter "mielecloudservice": 6.5.4, installed 6.5.4 Adapter "mihome-vacuum": 4.1.0 , installed 4.1.0 Adapter "musiccast" : 1.1.3 , installed 1.1.3 Adapter "net-tools" : 0.2.0 , installed 0.2.0 Adapter "netatmo" : 3.1.0 , installed 3.1.0 Adapter "philips-air" : 1.0.3 , installed 1.0.3 Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "pollenflug" : 1.0.6 , installed 1.0.6 Adapter "scenes" : 2.3.9 , installed 2.3.9 Adapter "shelly" : 6.6.1 , installed 6.6.1 Adapter "shuttercontrol": 1.6.3 , installed 1.6.3 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "smartcontrol" : 2.0.1 , installed 2.0.1 Adapter "socketio" : 6.6.0 , installed 6.6.0 Adapter "sonoff" : 3.0.3 , installed 3.0.3 Adapter "sonos" : 3.0.0 , installed 3.0.0 Adapter "trashschedule": 2.3.0 , installed 2.3.0 Adapter "tuya" : 3.14.2 , installed 3.14.2 Adapter "vis" : 1.5.4 , installed 1.5.4 Adapter "vis-colorpicker": 2.0.3 , installed 2.0.3 Adapter "vis-hqwidgets": 1.4.0 , installed 1.4.0 Adapter "vis-icontwo" : 1.0.0 , installed 1.0.0 Adapter "vis-inventwo" : 3.3.3 , installed 3.3.3 Adapter "vis-material-advanced": 1.7.4, installed 1.7.4 Adapter "vis-metro" : 1.2.0 , installed 1.2.0 Adapter "vis-players" : 0.1.6 , installed 0.1.6 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "weatherunderground": 3.6.0, installed 3.6.0 Adapter "web" : 6.1.10 , installed 6.1.10 Adapter "ws" : 2.5.8 , installed 2.5.8 Adapter "zigbee" : 1.8.25 , installed 1.8.24 [Updatable] Objects and States Please stand by - This may take a while Objects: 11296 States: 9373 *** OS-Repositories and Updates *** Hit:1 http://archive.raspberrypi.org/debian buster InRelease Hit:2 http://raspbian.raspberrypi.org/raspbian buster InRelease Hit:3 https://deb.nodesource.com/node_18.x nodistro InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 18008 642/sshd tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 14831 363/cupsd tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 20705 999/io.sonoff.0 tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 18400 632/iobroker.js-con tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 19317 632/iobroker.js-con tcp6 0 0 :::8081 :::* LISTEN 1001 178386 15017/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1001 363390 9027/io.web.0 tcp6 0 0 :::22 :::* LISTEN 0 18010 642/sshd tcp6 0 0 ::1:631 :::* LISTEN 0 14830 363/cupsd tcp6 0 0 :::3500 :::* LISTEN 1001 21820 980/io.sonos.0 udp 0 0 0.0.0.0:6666 0.0.0.0:* 1001 19741 1036/io.tuya.0 udp 0 0 0.0.0.0:6667 0.0.0.0:* 1001 19742 1036/io.tuya.0 udp 0 0 0.0.0.0:37928 0.0.0.0:* 1001 21652 911/io.philips-air. udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 21575 856/io.shelly.0 udp 0 0 0.0.0.0:68 0.0.0.0:* 0 18449 631/dhcpcd udp 0 0 0.0.0.0:631 0.0.0.0:* 0 16300 460/cups-browsed udp 0 0 0.0.0.0:41100 0.0.0.0:* 1001 24005 1320/io.musiccast.0 udp 0 0 0.0.0.0:60062 0.0.0.0:* 108 17435 356/avahi-daemon: r udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 17433 356/avahi-daemon: r udp 0 0 0.0.0.0:48886 0.0.0.0:* 1001 21952 1017/io.philips-air udp6 0 0 :::546 :::* 0 18466 631/dhcpcd udp6 0 0 :::5353 :::* 108 17434 356/avahi-daemon: r udp6 0 0 :::39823 :::* 108 17436 356/avahi-daemon: r *** Log File - Last 25 Lines *** 2023-12-28 17:33:48.594 - info: philips-air.0 (911) State value to set for "philips-air.0.filter.hepaFilterReplaceInHours" has to be type "number" but received type "string" 2023-12-28 17:33:48.644 - info: philips-air.0 (911) State value to set for "philips-air.0.filter.activeCarbonFilterReplaceInHours" has to be type "number" but received type "string" 2023-12-28 17:33:52.420 - info: philips-air.0 (911) State value to set for "philips-air.0.control.lightBrightness" has to be type "number" but received type "string" 2023-12-28 17:33:52.429 - info: philips-air.0 (911) State value to set for "philips-air.0.control.airQualityNotificationThreshold" has to be type "number" but received type "string" 2023-12-28 17:33:52.481 - info: philips-air.0 (911) State value to set for "philips-air.0.status.allergenIndex" has to be type "number" but received type "string" 2023-12-28 17:33:52.493 - info: philips-air.0 (911) State value to set for "philips-air.0.control.childLock" has to be type "boolean" but received type "string" 2023-12-28 17:33:52.542 - info: philips-air.0 (911) State value to set for "philips-air.0.device.uptime" has to be type "number" but received type "string" 2023-12-28 17:33:52.600 - info: philips-air.0 (911) State value to set for "philips-air.0.status.pm25" has to be type "number" but received type "string" 2023-12-28 17:33:52.618 - info: philips-air.0 (911) State value to set for "philips-air.0.control.timerHours" has to be type "number" but received type "string" 2023-12-28 17:33:52.625 - info: philips-air.0 (911) State value to set for "philips-air.0.status.timerMinutes" has to be type "number" but received type "string" 2023-12-28 17:33:52.640 - info: philips-air.0 (911) State value to set for "philips-air.0.filter.preFilterCleanInHours" has to be type "number" but received type "string" 2023-12-28 17:33:52.695 - info: philips-air.0 (911) State value to set for "philips-air.0.filter.hepaFilterReplaceInHours" has to be type "number" but received type "string" 2023-12-28 17:33:52.701 - info: philips-air.0 (911) State value to set for "philips-air.0.filter.activeCarbonFilterReplaceInHours" has to be type "number" but received type "string" 2023-12-28 17:34:18.240 - error: philips-air.1 (1017) Error by sending: Error: No reply in 247 seconds. 2023-12-28 17:34:24.323 - warn: sonoff.0 (999) Client [tasmota2] has invalid password or username 2023-12-28 17:34:38.463 - warn: sonos.0 (980) State "sonos.0.root.192_168_2_145.queue_html" has no existing object, this might lead to an error in future versions 2023-12-28 17:34:38.598 - warn: sonos.0 (980) State "sonos.0.root.192_168_2_145.queue_html" has no existing object, this might lead to an error in future versions 2023-12-28 17:34:48.242 - error: philips-air.1 (1017) Error by sending: Error: No reply in 247 seconds. 2023-12-28 17:35:00.048 - info: host.raspberrypi instance system.adapter.dwd.0 started with pid 303 2023-12-28 17:35:04.662 - info: dwd.0 (303) starting. Version 2.8.5 in /opt/iobroker/node_modules/iobroker.dwd, node: v18.19.0, js-controller: 5.0.17 2023-12-28 17:35:05.205 - info: web.0 (9027) ==> Connected system.user.admin from ::ffff:192.168.2.148 2023-12-28 17:35:07.075 - info: dwd.0 (303) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2023-12-28 17:35:07.617 - info: host.raspberrypi instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2023-12-28 17:35:15.042 - info: web.0 (9027) ==> Connected system.user.admin from ::ffff:192.168.2.148 2023-12-28 17:35:18.242 - error: philips-air.1 (1017) Error by sending: Error: No reply in 247 seconds. -
-
reboot gemacht?
debug modus im Adapter aktiviert?
Adapter neu gestartet?Wenn ja: zeigen
Wenn nein: machen und dann zeigenSonst kann hier wahrscheinlich keiner mehr weiter helfen...
-
der ist aktuell nicht das Problem...glaub den werfe ich erst mal raus...
-
Reboot und Adapter neu starten kann ich... Debug Modus ist wo?
