Error herdsman start Failed to start Zigbee

Thomas Braun

@varg sagte in Error herdsman start Failed to start Zigbee:

Das System selbst ist nagelneu aufgesetz

Und warum mit nodejs@20, wenn man der Eintragung oben trauen darf?

Check mal per

iob diag

die Installation.

varg

@thomas-braun

ok moment ich jags durch

varg

@thomas-braun


======== Start marking the full check here =========

Skript v.2023-10-10

*** BASE SYSTEM ***
Static hostname: iobrokerpi5
Icon name: computer
Operating System: Debian GNU/Linux 12 (bookworm)
Kernel: Linux 6.1.0-rpi7-rpi-2712
Architecture: arm64

Model : Raspberry Pi 5 Model B Rev 1.0
Docker : false
Virtualization : none
Kernel : aarch64
Userland : arm64

Systemuptime and Load:
12:07:23 up 18 min, 2 users, load average: 0.07, 0.14, 0.15
CPU threads: 4

*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

*** Time and Time Zones ***
Local time: Fri 2024-01-05 12:07:23 CET
Universal time: Fri 2024-01-05 11:07:23 UTC
RTC time: Fri 2024-01-05 11:07:23
Time zone: Europe/Berlin (CET, +0100)
System clock synchronized: yes
NTP service: active
RTC in local TZ: no

*** User and Groups ***
pi
/home/pi
pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker

*** X-Server-Setup ***
X-Server: false
Desktop:
Terminal: tty
Boot Target: multi-user.target

*** MEMORY ***
total used free shared buff/cache available
Mem: 8.4G 1.4G 6.8G 5.2M 439M 7.1G
Swap: 104M 0B 104M
Total: 8.5G 1.4G 6.9G

     8053 M total memory
     1287 M used memory
     1170 M active memory
      236 M inactive memory
     6439 M free memory
       36 M buffer memory
      383 M swap cache
       99 M total swap
        0 M used swap
       99 M free swap

Raspberry only:
vc_gencmd_read_response returned -1
error=1 error_msg="Command not registered"

*** FAILED SERVICES ***

UNIT LOAD ACTIVE SUB DESCRIPTION
0 loaded units listed.

*** FILESYSTEM ***
Filesystem Type Size Used Avail Use% Mounted on
udev devtmpfs 3.8G 0 3.8G 0% /dev
tmpfs tmpfs 806M 5.0M 801M 1% /run
/dev/mmcblk0p2 ext4 29G 3.3G 25G 12% /
tmpfs tmpfs 4.0G 0 4.0G 0% /dev/shm
tmpfs tmpfs 5.0M 48K 5.0M 1% /run/lock
/dev/mmcblk0p1 vfat 510M 61M 450M 12% /boot/firmware
tmpfs tmpfs 806M 0 806M 0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Fri Jan 5 11:48:26 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=D8:3A:DD:E2:FA:5E vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 console=ttyAMA10,115200 console=tty1 root=PARTUUID=c9d943cf-02 rootfstype=ext4 fsck.repair=yes rootwait
[Fri Jan 5 11:48:29 2024] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none.
[Fri Jan 5 11:48:30 2024] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none.

Show mounted filesystems (real ones only):
TARGET SOURCE FSTYPE OPTIONS
/ /dev/mmcblk0p2 ext4 rw,noatime
`-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
494M /var/
176M /var/cache
170M /var/cache/apt
160M /var/lib
132M /var/lib/apt/lists

Archived and active journals take up 56.9M in the file system.

/opt/iobroker/backups:
4.0K /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
231M /opt/iobroker/iobroker-data/
142M /opt/iobroker/iobroker-data/files
67M /opt/iobroker/iobroker-data/files/javascript.admin
48M /opt/iobroker/iobroker-data/files/javascript.admin/static
47M /opt/iobroker/iobroker-data/files/javascript.admin/static/js

The five largest files in iobroker-data are:
72M /opt/iobroker/iobroker-data/objects.jsonl
33M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js.map
12M /opt/iobroker/iobroker-data/states.jsonl
8.5M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js
7.5M /opt/iobroker/iobroker-data/files/javascript.admin/static/js/691.26ff76ce.chunk.js.map

USB-Devices by-id:
USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id':

find: '/dev/serial/by-id/': No such file or directory

*** NodeJS-Installation ***

/usr/bin/nodejs v20.10.0
/usr/bin/node v20.10.0
/usr/bin/npm 10.2.3
/usr/bin/npx 10.2.3
/usr/bin/corepack 0.22.0

nodejs:
Installed: 20.10.0-1nodesource1
Candidate: 20.10.0-1nodesource1
Version table:
*** 20.10.0-1nodesource1 600
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
100 /var/lib/dpkg/status
20.9.0-1nodesource1 600
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.8.1-1nodesource1 600
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.8.0-1nodesource1 600
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.7.0-1nodesource1 600
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.6.1-1nodesource1 600
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.6.0-1nodesource1 600
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.5.1-1nodesource1 600
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.5.0-1nodesource1 600
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.4.0-1nodesource1 600
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.3.1-1nodesource1 600
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.3.0-1nodesource1 600
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.2.0-1nodesource1 600
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.1.0-1nodesource1 600
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
20.0.0-1nodesource1 600
500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
18.19.0+dfsg-6~deb12u1 500
500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages
18.13.0+dfsg1-1 500
500 http://deb.debian.org/debian bookworm/main arm64 Packages

Temp directories causing npm8 problem: 0
No problems detected

Errors in npm tree:

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.

Objects type: jsonl
States type: jsonl

Core adapters versions
js-controller: 5.0.17
admin: 6.12.0
javascript: 7.1.6

Adapters from github: 1

Adapter State

system.adapter.admin.0 : admin : iobrokerpi5 - enabled, port: 8081, bind: 0.0.0.0, run as: admin
system.adapter.alexa2.0 : alexa2 : iobrokerpi5 - enabled
system.adapter.device-reminder.0 : device-reminder : iobrokerpi5 - disabled
system.adapter.fb-checkpresence.0 : fb-checkpresence : iobrokerpi5 - enabled
system.adapter.ical.0 : ical : iobrokerpi5 - enabled
system.adapter.info.0 : info : iobrokerpi5 - enabled
system.adapter.iot.0 : iot : iobrokerpi5 - enabled
system.adapter.javascript.0 : javascript : iobrokerpi5 - enabled
system.adapter.openweathermap.0 : openweathermap : iobrokerpi5 - enabled
system.adapter.ping.0 : ping : iobrokerpi5 - enabled
system.adapter.pushover.0 : pushover : iobrokerpi5 - enabled
system.adapter.shelly.0 : shelly : iobrokerpi5 - enabled, port: 1882, bind: 0.0.0.0
system.adapter.sonoff.0 : sonoff : iobrokerpi5 - enabled, port: 1883, bind: 0.0.0.0
system.adapter.tr-064.0 : tr-064 : iobrokerpi5 - enabled
system.adapter.trashschedule.0 : trashschedule : iobrokerpi5 - enabled
system.adapter.zigbee.0 : zigbee : iobrokerpi5 - enabled, port: /dev/serial/by-id/usb-Texas_Instruments_XDS110__03.00.00.26__Embed_with_CMSIS-DAP_L1100VGY-if00
system.adapter.zwave2.0 : zwave2 : iobrokerpi5 - disabled
instance is alive

Enabled adapters with bindings

system.adapter.admin.0 : admin : iobrokerpi5 - enabled, port: 8081, bind: 0.0.0.0, run as: admin
system.adapter.shelly.0 : shelly : iobrokerpi5 - enabled, port: 1882, bind: 0.0.0.0
system.adapter.sonoff.0 : sonoff : iobrokerpi5 - enabled, port: 1883, bind: 0.0.0.0
system.adapter.zigbee.0 : zigbee : iobrokerpi5 - enabled, port: /dev/serial/by-id/usb-Texas_Instruments_XDS110__03.00.00.26__Embed_with_CMSIS-DAP_L1100VGY-if00

ioBroker-Repositories
stable : http://iobroker.live/repo/sources-dist.json
beta : http://iobroker.live/repo/sources-dist-latest.json

Active repo(s): stable

Installed ioBroker-Instances
Used repository: stable
Adapter "admin" : 6.12.0 , installed 6.12.0
Adapter "alexa2" : 3.26.3 , installed 3.26.3
Adapter "device-reminder": 3.0.0 , installed 3.0.0
Adapter "fb-checkpresence": 1.2.2 , installed 1.2.2
Adapter "ical" : 1.13.3 , installed 1.13.6
Adapter "info" : 2.0.0 , installed 2.0.0
Adapter "iot" : 2.0.11 , installed 2.0.11
Adapter "javascript" : 7.1.6 , installed 7.1.6
Controller "js-controller": 5.0.17 , installed 5.0.17
Adapter "openweathermap": 0.4.5 , installed 0.4.5
Adapter "ping" : 1.6.2 , installed 1.6.2
Adapter "pushover" : 3.0.6 , installed 3.0.6
Adapter "shelly" : 6.6.1 , installed 6.6.1
Adapter "sonoff" : 3.0.3 , installed 3.0.3
Adapter "tr-064" : 4.2.18 , installed 4.2.18
Adapter "trashschedule": 2.3.0 , installed 3.1.3
Adapter "zigbee" : 1.9.5 , installed 1.9.5
Adapter "zwave2" : 3.1.0 , installed 3.1.0

Objects and States
Please stand by - This may take a while
Objects: 6996
States: 6069

*** OS-Repositories and Updates ***
Hit:1 http://deb.debian.org/debian bookworm InRelease
Hit:2 http://archive.raspberrypi.com/debian bookworm InRelease
Hit:3 http://deb.debian.org/debian-security bookworm-security InRelease
Hit:4 http://deb.debian.org/debian bookworm-updates InRelease
Hit:5 https://deb.nodesource.com/node_20.x nodistro InRelease
Reading package lists...
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name
tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 742 774/iobroker.js-con
tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 16083 774/iobroker.js-con
tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 15086 992/io.sonoff.0
tcp 0 0 0.0.0.0:1882 0.0.0.0:* LISTEN 1001 883 977/io.shelly.0
tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 14865 783/sshd: /usr/sbin
tcp6 0 0 :::8081 :::* LISTEN 1001 16543 835/io.admin.0
tcp6 0 0 :::22 :::* LISTEN 0 14867 783/sshd: /usr/sbin
udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 14779 668/avahi-daemon: r
udp 0 0 0.0.0.0:55814 0.0.0.0:* 104 14781 668/avahi-daemon: r
udp6 0 0 :::58098 :::* 104 14782 668/avahi-daemon: r
udp6 0 0 :::5353 :::* 104 14780 668/avahi-daemon: r
udp6 0 0 fe80::9c21:67c8:9e0:546 :::* 0 16562 744/NetworkManager

*** Log File - Last 25 Lines ***

2024-01-05 11:51:40.347 - info: zigbee.0 (1797) Try to reconnect. 1 attempts left
2024-01-05 11:51:40.347 - info: zigbee.0 (1797) Starting Zigbee npm ...
2024-01-05 11:51:40.354 - info: zigbee.0 (1797) Installed Version: iobroker.zigbee@1.9.5
2024-01-05 11:51:40.483 - error: zigbee.0 (1797) Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error: Device or resource busy, cannot open /dev/serial/by-id/usb-Texas_Instruments_XDS110__03.00.00.26__Embed_with_CMSIS-DAP_L1100VGY-if00'"
2024-01-05 11:51:40.484 - error: zigbee.0 (1797) Failed to start Zigbee
2024-01-05 11:51:40.484 - error: zigbee.0 (1797) Error herdsman start
2024-01-05 11:53:47.209 - info: admin.0 (835) ==> Connected system.user.admin from ::ffff:192.168.178.55
2024-01-05 11:53:47.253 - error: zigbee.0 (1797) getGroups: caught error: TypeError: Cannot read properties of undefined (reading 'getGroups')
2024-01-05 11:53:47.341 - info: zigbee.0 (1797) List of port: [{"path":"/dev/ttyACM0","manufacturer":"Texas Instruments","serialNumber":"L1100VGY","pnpId":"usb-Texas_Instruments_XDS110__03.00.00.26__Embed_with_CMSIS-DAP_L1100VGY-if00","vendorId":"0451","productId":"bef3"},{"path":"/dev/ttyACM1","manufacturer":"Texas Instruments","serialNumber":"L1100VGY","pnpId":"usb-Texas_Instruments_XDS110__03.00.00.26__Embed_with_CMSIS-DAP_L1100VGY-if03","vendorId":"0451","productId":"bef3"},{"path":"/dev/ttyAMA10"}]
2024-01-05 11:54:19.105 - info: sonoff.0 (992) Client [H801-09] reconnected. Old secret 1704451755348_1275. New secret 1704452059105_1488
2024-01-05 11:57:36.056 - info: admin.0 (835) <== Disconnect system.user.admin from ::ffff:192.168.178.55
2024-01-05 11:59:39.697 - info: admin.0 (835) ==> Connected system.user.admin from ::ffff:192.168.178.55
2024-01-05 11:59:39.765 - error: zigbee.0 (1797) getGroups: caught error: TypeError: Cannot read properties of undefined (reading 'getGroups')
2024-01-05 11:59:39.865 - info: zigbee.0 (1797) List of port: [{"path":"/dev/ttyACM0","manufacturer":"Texas Instruments","serialNumber":"L1100VGY","pnpId":"usb-Texas_Instruments_XDS110__03.00.00.26__Embed_with_CMSIS-DAP_L1100VGY-if00","vendorId":"0451","productId":"bef3"},{"path":"/dev/ttyACM1","manufacturer":"Texas Instruments","serialNumber":"L1100VGY","pnpId":"usb-Texas_Instruments_XDS110__03.00.00.26__Embed_with_CMSIS-DAP_L1100VGY-if03","vendorId":"0451","productId":"bef3"},{"path":"/dev/ttyAMA10"}]
2024-01-05 11:59:43.074 - info: admin.0 (835) <== Disconnect system.user.admin from ::ffff:192.168.178.55
2024-01-05 12:00:00.017 - info: host.iobrokerpi5 instance system.adapter.ical.0 started with pid 1940
2024-01-05 12:00:00.833 - info: ical.0 (1940) starting. Version 1.13.6 in /opt/iobroker/node_modules/iobroker.ical, node: v20.10.0, js-controller: 5.0.17
2024-01-05 12:00:01.353 - info: ical.0 (1940) processing URL: Abfallkalender https://calendar.google.com/calendar/ical/74136c8244b022bb0b5d97fdfdee2fe0673eff82bd6842020c2e12bf6c7b489f%40group.calendar.google.com/private-0f8560b829f811ff6c358361c50e5091/basic.ics
2024-01-05 12:00:01.403 - info: ical.0 (1940) processing URL: Getränkelieferung https://calendar.google.com/calendar/ical/d6sfsku6srbsv5hqp4ane444p8%40group.calendar.google.com/private-573cc39705cb099fd04bbf245c705fea/basic.ics
2024-01-05 12:00:01.478 - info: trashschedule.0 (1734) Setting "actionNeeded" flag for type.biomüll.actionNeeded to true (???)
2024-01-05 12:00:06.445 - info: ical.0 (1940) Terminated (NO_ERROR): Without reason
2024-01-05 12:00:06.967 - info: host.iobrokerpi5 instance system.adapter.ical.0 terminated with code 0 (NO_ERROR)
2024-01-05 12:03:18.582 - info: admin.0 (835) ==> Connected system.user.admin from ::ffff:192.168.178.55
2024-01-05 12:03:18.611 - error: zigbee.0 (1797) getGroups: caught error: TypeError: Cannot read properties of undefined (reading 'getGroups')
2024-01-05 12:03:18.692 - info: zigbee.0 (1797) List of port: [{"path":"/dev/ttyAMA10"}]

Copy text starting here:

======================= SUMMARY =======================
                        v.2023-10-10


 Static hostname: iobrokerpi5
       Icon name: computer
Operating System: Debian GNU/Linux 12 (bookworm)
          Kernel: Linux 6.1.0-rpi7-rpi-2712
    Architecture: arm64

Installation:           native
Kernel:                 aarch64
Userland:               arm64
Timezone:               Europe/Berlin (CET, +0100)
User-ID:                1000
X-Server:               false
Boot Target:            multi-user.target

Pending OS-Updates:     0
Pending iob updates:    0

Nodejs-Installation:    /usr/bin/nodejs         v20.10.0
                        /usr/bin/node           v20.10.0
                        /usr/bin/npm            10.2.3
                        /usr/bin/npx            10.2.3
                        /usr/bin/corepack       0.22.0

Recommended versions are nodejs  and npm
Your nodejs installation is correct

MEMORY:
               total        used        free      shared  buff/cache   available
Mem:            8.4G        1.4G        6.3G        5.4M        760M        7.0G
Swap:           104M          0B        104M
Total:          8.5G        1.4G        6.4G

Active iob-Instances:   14
Active repo(s): stable

ioBroker Core:          js-controller           5.0.17
                        admin                   6.12.0

ioBroker Status:        iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Status admin and web instance:
+ system.adapter.admin.0                  : admin                 : iobrokerpi5                              -  enabled, port: 8081, bind: 0.0.0.0, run as: admin

Objects:                6996
States:                 6069

Size of iob-Database:

80M     /opt/iobroker/iobroker-data/objects.jsonl
1.5M    /opt/iobroker/iobroker-data/states.jsonl



=================== END OF SUMMARY ====================

=== Mark text until here for copying ===

Thomas Braun

@varg

Per

iob nodejs-update 18

das Ding auf die empfohlene Version drücken.

varg

@thomas-braun said in Error herdsman start Failed to start Zigbee:

iob nodejs-update 18

ioBroker nodejs updater 2023-10-13
You requested to intall latest version from nodejs v18 tree.

Your current setup is:
/usr/bin/nodejs         v20.10.0
/usr/bin/node           v20.10.0
/usr/bin/npm            10.2.3
/usr/bin/npx            10.2.3
/usr/bin/corepack       0.22.0

We found these nodejs versions available for installation:

nodejs:
  Installed: 20.10.0-1nodesource1
  Candidate: 20.10.0-1nodesource1
  Version table:
 *** 20.10.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
        100 /var/lib/dpkg/status
     20.9.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.8.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.8.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.7.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.6.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.6.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.5.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.5.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.4.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.3.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.3.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.2.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.1.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.0.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     18.19.0+dfsg-6~deb12u1 500
        500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages
     18.13.0+dfsg1-1 500
        500 http://deb.debian.org/debian bookworm/main arm64 Packages



Nothing to do - Your installation is using the correct paths.

You are running nodejs v20.10.0. Do you want to install latest version from nodejs v.18 tree?

Press <y> to continue or any other key to quit
Trying to update your installation now. Please be patient.
Waiting for ioBroker to shut down - Give me a minute...
############################################################

*** These repos are active on your system:
Hit:1 http://deb.debian.org/debian bookworm InRelease
Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease
Hit:3 http://deb.debian.org/debian bookworm-updates InRelease
Hit:4 http://archive.raspberrypi.com/debian bookworm InRelease
Reading package lists... Done

*** Installing ca-certificates, curl and gnupg, just in case they are missing.

*** Creating new /etc/apt/sources.list.d/nodesource.list and pinning source

deb [signed-by=/etc/apt/keyrings/nodesource.gpg] https://deb.nodesource.com/node_18.x nodistro main
Package: nodejs
Pin: origin deb.nodesource.com
Pin-Priority: 1001

*** These repos are active after the adjustments:
Hit:1 http://deb.debian.org/debian bookworm InRelease
Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease
Hit:3 http://deb.debian.org/debian bookworm-updates InRelease
Hit:4 http://archive.raspberrypi.com/debian bookworm InRelease
Get:5 https://deb.nodesource.com/node_18.x nodistro InRelease [12.1 kB]
Get:6 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages [6656 B]
Get:7 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages [6613 B]
Fetched 25.4 kB in 1s (45.4 kB/s)
Reading package lists... Done

Installing the recommended nodejs version now!

Exact recommended version unknown, installing a fallback!
dpkg: warning: downgrading nodejs from 20.10.0-1nodesource1 to 18.0.0-1nodesource1
(Reading database ... 68077 files and directories currently installed.)
Preparing to unpack .../nodejs_18.0.0-1nodesource1_arm64.deb ...
Detected old npm client, removing...
Unpacking nodejs (18.0.0-1nodesource1) over (20.10.0-1nodesource1) ...
Setting up nodejs (18.0.0-1nodesource1) ...
Processing triggers for man-db (2.11.2-2) ...

Updating fallback to latest nodejs v18 release
(Reading database ... 68299 files and directories currently installed.)
Preparing to unpack .../nodejs_18.19.0-1nodesource1_arm64.deb ...
Detected old npm client, removing...
Unpacking nodejs (18.19.0-1nodesource1) over (18.0.0-1nodesource1) ...
Setting up nodejs (18.19.0-1nodesource1) ...
Processing triggers for man-db (2.11.2-2) ...
v18.19.0 has been installed! You are using the latest version now!
Installing the recommended nodejs version!

We tried our best to update or fix your nodejs. Please run iob diag again to verify.

*** RESTARTING ioBroker NOW! ***
 Please refresh or restart your browser in a few moments.

pi@iobrokerpi5:~ $

moment ich check ob sich was geändert hat und danke schonmal für den Beistand

Node.js v18.19.0
pi@iobrokerpi5:~ $ nodejs -v
v18.19.0
pi@iobrokerpi5:~ $ node -v
v18.19.0
pi@iobrokerpi5:~ $ npm -v
10.2.3
pi@iobrokerpi5:~ $

varg

@thomas-braun


zigbee.0
2024-01-05 12:17:42.424	error	Error herdsman start

zigbee.0
2024-01-05 12:17:42.423	error	Failed to start Zigbee

zigbee.0
2024-01-05 12:17:42.423	error	Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port'"

zigbee.0
2024-01-05 12:17:42.303	info	Installed Version: iobroker.zigbee@1.9.5

zigbee.0
2024-01-05 12:17:42.297	info	Starting Zigbee npm ...

zigbee.0
2024-01-05 12:17:42.297	info	Try to reconnect. 1 attempts left

zigbee.0
2024-01-05 12:17:32.294	error	Error herdsman start

zigbee.0
2024-01-05 12:17:32.293	error	Failed to start Zigbee

zigbee.0
2024-01-05 12:17:32.293	error	Starting zigbee-herdsman problem : "Failed to connect to the adapter (Error: SRSP - SYS - ping after 6000ms)"

pi@iobrokerpi5:~ $ ls -ls /dev/serial/by-id/
total 0
0 lrwxrwxrwx 1 root root 13 Jan  5 12:15 usb-Texas_Instruments_XDS110__03.00.00.26__Embed_with_CMSIS-DAP_L1100VGY-if00 -> ../../ttyACM0
0 lrwxrwxrwx 1 root root 13 Jan  5 12:15 usb-Texas_Instruments_XDS110__03.00.00.26__Embed_with_CMSIS-DAP_L1100VGY-if03 -> ../../ttyACM1


zigbee.0
2024-01-05 12:19:29.585	error	Error herdsman start

zigbee.0
2024-01-05 12:19:29.584	error	Failed to start Zigbee

zigbee.0
2024-01-05 12:19:29.584	error	Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port'"

zigbee.0
2024-01-05 12:19:29.459	info	Installed Version: iobroker.zigbee@1.9.5

zigbee.0
2024-01-05 12:19:29.451	info	Starting Zigbee npm ...

zigbee.0
2024-01-05 12:19:29.450	info	Try to reconnect. 1 attempts left

zigbee.0
2024-01-05 12:19:19.447	error	Error herdsman start

zigbee.0
2024-01-05 12:19:19.447	error	Failed to start Zigbee

zigbee.0
2024-01-05 12:19:19.447	error	Starting zigbee-herdsman problem : "startup failed - configuration-adapter mismatch - see logs above for more information"

zigbee.0
2024-01-05 12:19:19.376	error	Re-commissioning your network will require re-pairing of all devices!

zigbee.0
2024-01-05 12:19:19.375	error	If you wish to re-commission your network, please remove coordinator backup at /opt/iobroker/iobroker-data/zigbee_0/nvbackup.json.

zigbee.0
2024-01-05 12:19:19.375	error	Please update configuration to prevent further issues.

zigbee.0
2024-01-05 12:19:19.375	error	- Channel List: configured=11, adapter=11

zigbee.0
2024-01-05 12:19:19.374	error	- Network Key: configured=ffffffffffffffffaaaaaaaaaaaaaaaa, adapter=ffffffffffffffffbbbbbbbbbbbbbbbb

zigbee.0
2024-01-05 12:19:19.374	error	- Extended PAN ID: configured=ffffffffaaaaaaaa, adapter=ddddddddaaaaaaaa

zigbee.0
2024-01-05 12:19:19.374	error	- PAN ID: configured=6754, adapter=6754

zigbee.0
2024-01-05 12:19:19.373	error	Configuration is not consistent with adapter state/backup!

1
Zeit
debug
Nachricht

zigbee.0
2024-01-05 12:22:15.518	error	Error herdsman start

zigbee.0
2024-01-05 12:22:15.518	error	Failed to start Zigbee

zigbee.0
2024-01-05 12:22:15.517	error	Starting zigbee-herdsman problem : "network commissioning timed out - most likely network with the same panId or extendedPanId already exists nearby"

admin.0
2024-01-05 12:22:13.107	info	<== Disconnect system.user.admin from ::ffff:192.168.178.55

admin.0
2024-01-05 12:22:13.107	info	<== Disconnect system.user.admin from ::ffff:192.168.178.55

zigbee.0
2024-01-05 12:22:04.147	info	List of port: [{"path":"/dev/ttyACM0","manufacturer":"Texas Instruments","serialNumber":"L1100VGY","pnpId":"usb-Texas_Instruments_XDS110__03.00.00.26__Embed_with_CMSIS-DAP_L1100VGY-if00","vendorId":"0451","productId":"bef3"},{"path":"/dev/ttyACM1","manufacturer":"Texas Instruments","serialNumber":"L1100VGY","pnpId":"usb-Texas_Instruments_XDS110__03.00.00.26__Embed_with_CMSIS-DAP_L1100VGY-if03","vendorId":"0451","productId":"bef3"},{"path":"/dev/ttyAMA10"}]

zigbee.0
2024-01-05 12:22:04.051	error	getGroups: caught error: TypeError: Cannot read properties of undefined (reading 'getGroups')

admin.0
2024-01-05 12:22:03.973	info	==> Connected system.user.admin from ::ffff:192.168.178.55

admin.0
2024-01-05 12:22:02.099	info	<== Disconnect system.user.admin from ::ffff:192.168.178.55

zigbee.0
2024-01-05 12:21:58.972	info	List of port: [{"path":"/dev/ttyACM0","manufacturer":"Texas Instruments","serialNumber":"L1100VGY","pnpId":"usb-Texas_Instruments_XDS110__03.00.00.26__Embed_with_CMSIS-DAP_L1100VGY-if00","vendorId":"0451","productId":"bef3"},{"path":"/dev/ttyACM1","manufacturer":"Texas Instruments","serialNumber":"L1100VGY","pnpId":"usb-Texas_Instruments_XDS110__03.00.00.26__Embed_with_CMSIS-DAP_L1100VGY-if03","vendorId":"0451","productId":"bef3"},{"path":"/dev/ttyAMA10"}]

zigbee.0
2024-01-05 12:21:58.878	error	getGroups: caught error: TypeError: Cannot read properties of undefined (reading 'getGroups')

ich installier den adapter mal neu

varg

@thomas-braun

will leider nicht


zigbee.0
2024-01-05 12:32:22.961	error	Error herdsman start

zigbee.0
2024-01-05 12:32:22.961	error	Failed to start Zigbee

zigbee.0
2024-01-05 12:32:22.961	error	Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port'"

zigbee.0
2024-01-05 12:32:22.824	info	Installed Version: iobroker.zigbee@1.9.5

zigbee.0
2024-01-05 12:32:22.816	info	Starting Zigbee npm ...

zigbee.0
2024-01-05 12:32:22.815	info	Try to reconnect. 1 attempts left

admin.0
2024-01-05 12:32:18.198	info	<== Disconnect system.user.admin from ::ffff:192.168.178.55

admin.0
2024-01-05 12:32:18.198	info	<== Disconnect system.user.admin from ::ffff:192.168.178.55

zigbee.0
2024-01-05 12:32:12.812	error	Error herdsman start

zigbee.0
2024-01-05 12:32:12.812	error	Failed to start Zigbee

zigbee.0
2024-01-05 12:32:12.812	error	Starting zigbee-herdsman problem : "Failed to connect to the adapter (Error: SRSP - SYS - ping after 6000ms)"

zigbee.0
2024-01-05 12:32:05.356	info	List of port: [{"path":"/dev/ttyACM0","manufacturer":"Texas Instruments","serialNumber":"L1100VGY","pnpId":"usb-Texas_Instruments_XDS110__03.00.00.26__Embed_with_CMSIS-DAP_L1100VGY-if00","vendorId":"0451","productId":"bef3"},{"path":"/dev/ttyACM1","manufacturer":"Texas Instruments","serialNumber":"L1100VGY","pnpId":"usb-Texas_Instruments_XDS110__03.00.00.26__Embed_with_CMSIS-DAP_L1100VGY-if03","vendorId":"0451","productId":"bef3"},{"path":"/dev/ttyAMA10"}]

zigbee.0
2024-01-05 12:32:05.235	error	getGroups: caught error: TypeError: Cannot read properties of undefined (reading 'getGroups')

varg

Ich vermute es hat was mit der neuen TI Platine zu tun.

Wenn ich den alten Stick von Arteck anschliesse funzt es auch nach Neustart.

@arteck hast Du eine Idee wie ich das Board richtig einbinde. Geflasht wurde es wie oben beschrieben

Ich kann nur so viel sagen dass ich mit dem TI Board nach jedem neustart ein port problem bekomme

Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port'"

Thomas Braun

@varg

Ich kenne das Ding nicht, wie wird das denn angebunden? Über einen Seriellen Port?

varg

@thomas-braun

ich sag einfach mal ja hab aber wenig ahnung.
vor 2 Jahren konnte ich die platine noch in nem anderen system ohne probleme einbinden.
die neuere revision eben nicht

youtube

Meister Mopper

@thomas-braun

Ich denke, hier ist der Wurm drin, oder?

     20.0.0-1nodesource1 600

        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     18.19.0+dfsg-6~deb12u1 500
        500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages
     18.13.0+dfsg1-1 500
        500 http://deb.debian.org/debian bookworm/main arm64 Packages

Thomas Braun

@meister-mopper

Das ist bereits geändert worden:

v18.19.0 has been installed! You are using the latest version now!

Thomas Braun

@varg

Mach zur Sicherheit noch:

echo -e "Package: nodejs\nPin: origin deb.nodesource.com\nPin-Priority: 1001" | sudo tee /etc/apt/preferences.d/nodejs.pref
sudo apt update
iob stop
sudo apt install nodejs=18.19.0-1nodesource1
iob start

varg

@thomas-braun

Ich hab das System nochmal komplett neu mit nodejs18 aufgesetzt und den alten Stick in Betrieb genommen.

Vielleicht hat noch jemand die neuere ti Platine mit der config und kann was dazu sagen.

Ich teste das Teil die Tage mal an einem PI4 mit buster und schau ob's damit läuft

Würde mich dann nochmal melden. Danke Euch

BigChris

Bist du weitergekommen?

Gleiches Problem bei mir, nach Update vom Zigbee Adapter und nodejs funtioniert der Zigbee Adapter nicht mehr.
Bei mir mit dem raspbee als Aufsteckplatine.

Copy text starting here:

======================= SUMMARY =======================
			v.2023-10-10


 Static hostname: pi-iobroker
       Icon name: computer
Operating System: Raspbian GNU/Linux 12 (bookworm)
          Kernel: Linux 6.1.0-rpi4-rpi-v8
    Architecture: arm64

Installation: 		native
Kernel: 		aarch64
Userland: 		armhf
Timezone: 		Europe/Berlin (CET, +0100)
User-ID: 		1000
X-Server: 		false
Boot Target: 		multi-user.target

Pending OS-Updates: 	0
Pending iob updates: 	0

Nodejs-Installation: 	/usr/bin/nodejs 	v18.19.0
			/usr/bin/node 		v18.19.0
			/usr/bin/npm 		10.2.3
			/usr/bin/npx 		10.2.3
			/usr/bin/corepack 	0.22.0

Recommended versions are nodejs  and npm 
Your nodejs installation is correct

MEMORY: 
               total        used        free      shared  buff/cache   available
Mem:            8.2G        749M        7.1G        1.2M        477M        7.4G
Swap:           104M          0B        104M
Total:          8.3G        749M        7.2G

Active iob-Instances: 	9
Active repo(s): stable

ioBroker Core: 		js-controller 		5.0.17
			admin 			6.12.0

ioBroker Status: 	iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Status admin and web instance:
+ system.adapter.admin.0                  : admin                 : pi-iobroker                              -  enabled, port: 8081, bind: 0.0.0.0, run as: admin

Objects: 		1713
States: 		1506

Size of iob-Database:

19M	/opt/iobroker/iobroker-data/objects.jsonl
2.7M	/opt/iobroker/iobroker-data/states.jsonl



=================== END OF SUMMARY ====================

Was mich wundert ist das hier:
USB-Devices by-id:
USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id':

find: '/dev/serial/by-id/': No such file or directory

Irgendwie wird die Platine nicht mehr erkannt. Das passiert bei zwei Systemen bei mir, jeweils Rasperry Pi 3 und raspbee.

Thomas Braun

@bigchris sagte in Error herdsman start Failed to start Zigbee:

Irgendwie wird die Platine nicht mehr erkannt.

An der Stelle dürfte die noch nie erkannt worden sein. Da tauchen nur USB-Geräte auf. Du hast doch da ein IP-basiertes Ding laufen, oder?

MartinP

@thomas-braun Im ersten Logging finde ich "/dev/ttyACM0" das deutet doch auf USB hin, oder?

Braille-Reader Service?

Thomas Braun

Gerade über 'raspbee' gestolpert...
@BigChris : Hast du in

sudo raspi-config

auch die Serielle Schnittstelle freigeschaltet?

MartinP

@thomas-braun Für solche Sachen bin ich auch Spezialist - solche "Unterbau-Vorbereitungen", die man vor Urzeiten mal gemacht hat vergesse ich auch regelmäßig bei Umzügen ...

Thomas Braun

@martinp

Es gibt Leute, die führen Buch über Änderungen / Ergänzungen am System.

NEWS

Error herdsman start Failed to start Zigbee

Support us

765
Online

31.8k
Users

80.0k
Topics

1.3m
Posts

NEWS

Error herdsman start Failed to start Zigbee

Support us

765Online

31.8kUsers

80.0kTopics

1.3mPosts

765
Online

31.8k
Users

80.0k
Topics

1.3m
Posts