Ziggbe sendet nicht mehr an empfängt aber noch Daten
-
@thomas-braun sagte in Ziggbe sendet nicht mehr an empfängt aber noch Daten:
@tapdance-0 sagte in Ziggbe sendet nicht mehr an empfängt aber noch Daten:
Currently 28 devices are joined
Sind für den ollen CC2531 auch zuviele Geräte. Das packt der nicht mehr.
Tausch das gegen was aktuelles aus.CC2531:
Warning 1: requires additional hardware to flash (CC debugger + download cable)
Warning 2: might not be powerful enough to handle networks of 20+ devices
Warning 3: this adapter has bad rangeDem kann ich mich nur anschließen.
Auch: der Zigbee Adapter braucht insbesondere bei den cc2531 durchaus mal eine oder 2 Minuten bis er stabil läuft. Bis da hin ist da zigbee Netzwerk mit Rekonstruktion beschäftigt.
A.
-
Gegen was würdet ihr den den tauschen? muss ich dann alles neu anlernen und programmieren?
-
Am besten was von Amazon was sofort lieferbar ist und garantiert sofort funktioniert. Den stick musste ich damals flashen und das hat Tage gedauert bis es funktioniert hat. Ist echt nervig wenn das halbe Smart Home nicht funktioniert.
DANKE noch mal für die schnelle Hilfe.
-
Empfohlene Sticks:
https://www.zigbee2mqtt.io/guide/adapters/#recommended
Wechsel des Sticks:
https://www.zigbee2mqtt.io/guide/faq/#how-do-i-migrate-from-one-adapter-to-another -
Sorry spreche kein englisch und blicke da nicht durch. Sind die jetzt sofort funktionsbereit oder muss ich da noch bestimmte Firmware drauf spielen und wo genau bekomme ich die?
USB connected (easiest)
Electrolama zig-a-zig-ah! (zzh!)
Slaesh's CC2652RB stick
Tube's CC2652P2 USB Coordinator
Egony Stick V4
ZigStar Stick v4
CircuitSetup's CC2652P2 USB Coordinator
SMLIGHT CC2652P Zigbee USB Adapter SLZB-02
SONOFF Zigbee 3.0 USB Dongle Plus ZBDongle-P
Vision CC2652 dongle
JetHome JetStick Z2/ZB6UX CC2652P1 -
@tapdance-0 sagte in Ziggbe sendet nicht mehr an empfängt aber noch Daten:
Besorg dir den:
SONOFF Zigbee 3.0 USB Dongle Plus ZBDongle-P
Der dürfte auch über die Amazonen erhältlich sein und hat die passende Firmware. Aufpassen, es gibt auch eine Version -E, du möchtest aber lieber -P haben.
-
dann müsste der das sein richtig?
DANKE noch mal für die Unterstützung.
-
Ja, das sollte der richtige sein.
-
@tapdance-0
Leg dir auch gleich eine 1,5m-USB-Verlängerung in den Einkauskorb. Empfiehlt sich für sowas. -
Danke habe ich gemacht hoffe ich bekommen das dann morgen hin wenn er geliefert wird.
Danke noch mal für die Unterstützung.
-
Der neue Zigbee stick ist da und angeschlossen, doch jetzt startet der Zigbee Adapter wieder nicht
Hoffe ihr könnt noch mal helfen.
DANKE
======== Start marking the full check here ========= Skript v.2023-10-10 *** BASE SYSTEM *** Static hostname: raspberrypi Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.1.0-rpi7-rpi-v8 Architecture: arm64 Model : Raspberry Pi 4 Model B Rev 1.1 Docker : false Virtualization : none Kernel : aarch64 Userland : arm64 Systemuptime and Load: 16:32:45 up 3 min, 3 users, load average: 1.29, 1.41, 0.63 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Sun 2024-01-21 16:32:45 CET Universal time: Sun 2024-01-21 15:32:45 UTC RTC time: n/a Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** PI /home/PI PI adm dialout cdrom sudo audio video plugdev games users input render netdev lpadmin gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 4.0G 1.6G 2.0G 1.3M 417M 2.3G Swap: 104M 0B 104M Total: 4.1G 1.6G 2.1G 3793 M total memory 1567 M used memory 1595 M active memory 164 M inactive memory 1903 M free memory 39 M buffer memory 358 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 1.6G 0 1.6G 0% /dev tmpfs tmpfs 380M 1.2M 379M 1% /run /dev/mmcblk0p2 ext4 28G 7.0G 20G 27% / tmpfs tmpfs 1.9G 8.0K 1.9G 1% /dev/shm tmpfs tmpfs 5.0M 16K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 510M 73M 438M 15% /boot/firmware tmpfs tmpfs 380M 32K 380M 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Sun Jan 21 16:28:52 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=DC:A6:32:64:62:CC vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=9515910b-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [Sun Jan 21 16:28:56 2024] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Sun Jan 21 16:28:59 2024] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime,commit=600 `-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 643M /var/ 194M /var/lib 185M /var/cache 172M /var/cache/apt 163M /var/log Archived and active journals take up 161.5M in the file system. /opt/iobroker/backups: 4.0K /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 369M /opt/iobroker/iobroker-data/ 270M /opt/iobroker/iobroker-data/files 78M /opt/iobroker/iobroker-data/files/icons-open-icon-library-png 73M /opt/iobroker/iobroker-data/backup-objects 67M /opt/iobroker/iobroker-data/files/javascript.admin The five largest files in iobroker-data are: 22M /opt/iobroker/iobroker-data/objects.jsonl 21M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.aaea95f8.js.map 8.3M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.aaea95f8.js 7.5M /opt/iobroker/iobroker-data/files/javascript.admin/static/js/691.26ff76ce.chunk.js.map 7.1M /opt/iobroker/iobroker-data/files/javascript.admin/static/js/610.d3cce782.chunk.js.map USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_8eb6f719a99ded11ad35dca5a7669f5d-if00-port0 *** NodeJS-Installation *** /usr/bin/nodejs v18.19.0 /usr/bin/node v18.19.0 /usr/bin/npm 10.2.3 /usr/bin/npx 10.2.3 /usr/bin/corepack 0.22.0 nodejs: Installed: 18.19.0-1nodesource1 Candidate: 18.19.0-1nodesource1 Version table: 18.19.0+dfsg-6~deb12u1 500 500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages *** 18.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 18.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.13.0+dfsg1-1 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages 18.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.17 admin: 6.12.0 javascript: 7.1.6 Adapters from github: 0 Adapter State + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alarm.0 : alarm : raspberrypi - enabled + system.adapter.backitup.0 : backitup : raspberrypi - enabled + system.adapter.broadlink2.0 : broadlink2 : raspberrypi - enabled + system.adapter.cloud.0 : cloud : raspberrypi - enabled + system.adapter.discovery.0 : discovery : raspberrypi - enabled + system.adapter.history.0 : history : raspberrypi - enabled + system.adapter.hm-rega.0 : hm-rega : raspberrypi - enabled + system.adapter.hm-rpc.0 : hm-rpc : raspberrypi - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : raspberrypi - enabled, port: 0 system.adapter.icons-icons8.0 : icons-icons8 : raspberrypi - disabled system.adapter.icons-material-png.0 : icons-material-png : raspberrypi - disabled system.adapter.icons-open-icon-library-png.0: icons-open-icon-library-png: raspberrypi - disabled + system.adapter.info.0 : info : raspberrypi - enabled + system.adapter.javascript.0 : javascript : raspberrypi - enabled system.adapter.mobile.0 : mobile : raspberrypi - disabled + system.adapter.ping.0 : ping : raspberrypi - enabled + system.adapter.sayit.0 : sayit : raspberrypi - enabled + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : raspberrypi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.synology.0 : synology : raspberrypi - enabled, port: 5000 + system.adapter.telegram.0 : telegram : raspberrypi - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.terminal.0 : terminal : raspberrypi - enabled, port: 8088, bind: 192.168.2.4, run as: admin + system.adapter.tr-064.0 : tr-064 : raspberrypi - enabled system.adapter.vis-bars.0 : vis-bars : raspberrypi - disabled system.adapter.vis-colorpicker.0 : vis-colorpicker : raspberrypi - disabled system.adapter.vis-fancyswitch.0 : vis-fancyswitch : raspberrypi - disabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : raspberrypi - disabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : raspberrypi - disabled system.adapter.vis-players.0 : vis-players : raspberrypi - enabled system.adapter.vis.0 : vis : raspberrypi - enabled + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.whatsapp-cmb.0 : whatsapp-cmb : raspberrypi - enabled + system.adapter.wifilight.0 : wifilight : raspberrypi - enabled + system.adapter.yahka.0 : yahka : raspberrypi - enabled + system.adapter.zigbee.0 : zigbee : raspberrypi - enabled, port: /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B0018E2F56A-if00 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.hm-rpc.0 : hm-rpc : raspberrypi - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : raspberrypi - enabled, port: 0 + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : raspberrypi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.synology.0 : synology : raspberrypi - enabled, port: 5000 + system.adapter.telegram.0 : telegram : raspberrypi - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.terminal.0 : terminal : raspberrypi - enabled, port: 8088, bind: 192.168.2.4, run as: admin + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : raspberrypi - enabled, port: /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B0018E2F56A-if00 ioBroker-Repositories Beta (latest) : http://download.iobroker.net/sources-dist-latest.json Stable (default): http://download.iobroker.net/sources-dist.json Active repo(s): Stable (default) Installed ioBroker-Instances Used repository: Stable (default) Adapter "admin" : 6.12.0 , installed 6.12.0 Adapter "alarm" : 3.6.0 , installed 3.6.0 Adapter "backitup" : 2.9.8 , installed 2.9.8 Adapter "broadlink2" : 2.1.5 , installed 2.1.5 Adapter "cloud" : 4.4.1 , installed 4.4.1 Adapter "discovery" : 4.2.0 , installed 4.2.0 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "hm-rega" : 4.0.0 , installed 4.0.0 Adapter "hm-rpc" : 1.15.19 , installed 1.15.19 Adapter "icons-icons8" : 0.0.1 , installed 0.0.1 Adapter "icons-material-png": 0.1.0, installed 0.1.0 Adapter "icons-open-icon-library-png": 0.1.2, installed 0.1.2 Adapter "info" : 2.0.0 , installed 2.0.0 Adapter "javascript" : 7.1.6 , installed 7.1.6 Controller "js-controller": 5.0.17 , installed 5.0.17 Adapter "mobile" : 1.0.1 , installed 1.0.1 Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "sayit" : 3.0.5 , installed 3.0.5 Adapter "shelly" : 6.6.1 , installed 6.6.1 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 6.6.0 , installed 6.6.0 Adapter "sonoff" : 3.0.3 , installed 3.0.3 Adapter "synology" : 3.0.1 , installed 3.0.1 Adapter "telegram" : 3.0.1 , installed 1.16.0 [Updatable] Adapter "terminal" : 1.0.0 , installed 1.0.0 Adapter "tr-064" : 4.2.18 , installed 4.2.18 Adapter "vis" : 1.5.4 , installed 1.5.4 Adapter "vis-bars" : 0.1.4 , installed 0.1.4 Adapter "vis-colorpicker": 2.0.3 , installed 2.0.3 Adapter "vis-fancyswitch": 1.1.0 , installed 1.1.0 Adapter "vis-hqwidgets": 1.4.0 , installed 1.4.0 Adapter "vis-jqui-mfd" : 1.0.12 , installed 1.0.12 Adapter "vis-players" : 0.1.6 , installed 0.1.6 Adapter "web" : 6.1.10 , installed 6.1.10 Adapter "whatsapp-cmb" : 0.2.3 , installed 0.2.3 Adapter "wifilight" : 1.1.4 , installed 1.1.4 Adapter "ws" : 2.5.8 , installed 2.5.8 Adapter "yahka" : 1.0.3 , installed 1.0.3 Adapter "zigbee" : 1.10.1 , installed 1.9.7 [Updatable] Objects and States Please stand by - This may take a while Objects: 5503 States: 4905 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian bookworm InRelease Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease Hit:3 http://deb.debian.org/debian bookworm-updates InRelease Hit:4 http://archive.raspberrypi.com/debian bookworm InRelease Hit:5 https://deb.nodesource.com/node_18.x nodistro InRelease Reading package lists... Pending Updates: 1 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 18072 1133/io.sonoff.0 tcp 0 0 192.168.2.4:2010 0.0.0.0:* LISTEN 1001 15234 1081/io.hm-rpc.1 tcp 0 0 192.168.2.4:2001 0.0.0.0:* LISTEN 1001 18000 1057/io.hm-rpc.0 tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 15659 783/cupsd tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 17317 784/iobroker.js-con tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 15044 784/iobroker.js-con tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 14884 796/sshd: /usr/sbin tcp6 0 0 :::8082 :::* LISTEN 1001 20375 1964/io.web.0 tcp6 0 0 :::8081 :::* LISTEN 1001 15912 962/io.admin.0 tcp6 0 0 :::8088 :::* LISTEN 1001 20131 1544/io.terminal.0 tcp6 0 0 :::37485 :::* LISTEN 1001 21491 2003/io.yahka.0 tcp6 0 0 ::1:631 :::* LISTEN 0 15658 783/cupsd tcp6 0 0 :::22 :::* LISTEN 0 14886 796/sshd: /usr/sbin udp 0 0 0.0.0.0:41433 0.0.0.0:* 1001 27228 3290/io.broadlink2. udp 0 0 0.0.0.0:631 0.0.0.0:* 0 14975 863/cups-browsed udp 0 0 0.0.0.0:15001 0.0.0.0:* 1001 28156 3290/io.broadlink2. udp 0 0 0.0.0.0:52376 0.0.0.0:* 1001 27229 3290/io.broadlink2. udp 0 0 192.168.2.4:5353 0.0.0.0:* 1001 16153 1165/io.tr-064.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 15556 523/avahi-daemon: r udp 0 0 0.0.0.0:60813 0.0.0.0:* 104 15558 523/avahi-daemon: r udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 18051 1106/io.shelly.0 udp6 0 0 :::39207 :::* 104 15559 523/avahi-daemon: r udp6 0 0 fe80::67d1:e1cb:7ef:546 :::* 0 17307 664/NetworkManager udp6 0 0 :::5353 :::* 104 15557 523/avahi-daemon: r *** Log File - Last 25 Lines *** 2024-01-21 16:34:01.381 - warn: sonoff.0 (1133) Client [Muschel Terrasse] has invalid password or username 2024-01-21 16:34:01.418 - warn: sonoff.0 (1133) Client [Pavillon Beleuchtung] has invalid password or username 2024-01-21 16:34:01.764 - info: host.raspberrypi instance system.adapter.broadlink2.0 started with pid 3290 2024-01-21 16:34:02.379 - warn: sonoff.0 (1133) Client [Wohnzimmer-Vitrine] has invalid password or username 2024-01-21 16:34:02.422 - warn: sonoff.0 (1133) Client [Pool Beleuchtung] has invalid password or username 2024-01-21 16:34:02.488 - warn: sonoff.0 (1133) Client [PC-Buero] has invalid password or username 2024-01-21 16:34:05.121 - warn: sonoff.0 (1133) Client [Pool Pumpe] has invalid password or username 2024-01-21 16:34:06.343 - warn: shelly.0 (1106) [authEnabled] 192.168.2.214 (shellydimmer2 / shellydimmer2-8CAAB54C4B57 / SHDM-2#8CAAB54C4B57#1): This device is not protected via restricted login (see adapter documentation for details) 2024-01-21 16:34:07.510 - warn: shelly.0 (1106) [authEnabled] 192.168.2.180 (shellydimmer / shellydimmer-D3E918 / SHDM-1#D3E918#1): This device is not protected via restricted login (see adapter documentation for details) 2024-01-21 16:34:08.211 - info: broadlink2.0 (3290) starting. Version 2.1.5 in /opt/iobroker/node_modules/iobroker.broadlink2, node: v18.19.0, js-controller: 5.0.17 2024-01-21 16:34:07.671 - warn: shelly.0 (1106) [authEnabled] 192.168.2.226 (shellydimmer2 / shellydimmer2-8CAAB54C4E21 / SHDM-2#8CAAB54C4E21#1): This device is not protected via restricted login (see adapter documentation for details) 2024-01-21 16:34:07.683 - warn: shelly.0 (1106) State value to set for "shelly.0.SHDM-1#D3E918#1.temperatureF" has value "101.66" greater than max "100" 2024-01-21 16:34:08.481 - info: broadlink2.0 (3290) broadlink2 initialization started... 2024-01-21 16:34:08.486 - info: broadlink2.0 (3290) Scanning additional IP's: 192.168.2.169 2024-01-21 16:34:08.487 - info: broadlink2.0 (3290) Devices to add: 0xabcd=RM4 2024-01-21 16:34:08.489 - info: broadlink2.0 (3290) Devices to rename: LB:hostName-aa-bb-cc=LB:SmartBulb 2024-01-21 16:34:08.492 - info: broadlink2.0 (3290) broadlink2 has 3 old devices! 2024-01-21 16:34:08.497 - info: broadlink2.0 (3290) interface to be used: { netmaskBits: 24, address: '192.168.2.4/24', addrs: [ 192, 168, 2, 4 ], cidr: '192.168.2.4/24', bcaddr: '192.168.2.255' }: 2024-01-21 16:34:08.498 - info: broadlink2.0 (3290) macObjects: [ '24:df:a7:b1:1a:8d', 'a0:43:b0:14:80:2b', 'b4:43:0d:aa:80:31' ] 2024-01-21 16:34:08.502 - info: broadlink2.0 (3290) Discover Broadlink devices for 10sec on broadlink2.0 2024-01-21 16:34:08.590 - info: broadlink2.0 (3290) interface to be used: { netmaskBits: 24, address: '192.168.2.4/24', addrs: [ 192, 168, 2, 4 ], cidr: '192.168.2.4/24', bcaddr: '192.168.2.255' }: 2024-01-21 16:34:08.593 - info: broadlink2.0 (3290) discover [ '192.168.2.255', '255.255.255.255', '224.0.0.251' ] from 0.0.0.0:41433 2024-01-21 16:34:09.382 - info: broadlink2.0 (3290) Device RM:RMPRO-MOVE315-b1-1a-8d detected: address=192.168.2.169, mac=24:df:a7:b1:1a:8d, typ=RMP, id=0x27a9 devtype=RM3 Pro Plus ============ Mark until here for C&P ============= iob diag has finished.======================= SUMMARY ======================= v.2023-10-10 Static hostname: raspberrypi Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.1.0-rpi7-rpi-v8 Architecture: arm64 Installation: native Kernel: aarch64 Userland: arm64 Timezone: Europe/Berlin (CET, +0100) User-ID: 1000 X-Server: false Boot Target: multi-user.target Pending OS-Updates: 1 Pending iob updates: 2 Nodejs-Installation: /usr/bin/nodejs v18.19.0 /usr/bin/node v18.19.0 /usr/bin/npm 10.2.3 /usr/bin/npx 10.2.3 /usr/bin/corepack 0.22.0 Recommended versions are nodejs 18.19.0 and npm 10.2.3 Your nodejs installation is correct MEMORY: total used free shared buff/cache available Mem: 4.0G 1.7G 1.6G 1.3M 765M 2.3G Swap: 104M 0B 104M Total: 4.1G 1.7G 1.7G Active iob-Instances: 25 Active repo(s): Stable (default) ioBroker Core: js-controller 5.0.17 admin 6.12.0 ioBroker Status: iobroker is running on this host. Objects type: jsonl States type: jsonl Status admin and web instance: + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin Objects: 5503 States: 4905 Size of iob-Database: 22M /opt/iobroker/iobroker-data/objects.jsonl 5.3M /opt/iobroker/iobroker-data/states.jsonl =================== END OF SUMMARY ====================PI@raspberrypi:~ $ iob logs | grep zigbee 2024-01-21 16:24:16.091 - debug: zigbee.0 (2837) DeviceAvailability:Publish available for 0xf4b3b1fffef87315 = false 2024-01-21 16:24:16.105 - debug: zigbee.0 (2837) DeviceAvailability:Publish LQ for 0xf4b3b1fffef87315 = 0 2024-01-21 16:24:16.109 - debug: zigbee.0 (2837) DeviceAvailability:Publish available for 0xf4b3b1fffef8731e = false 2024-01-21 16:24:16.122 - debug: zigbee.0 (2837) DeviceAvailability:Publish LQ for 0xf4b3b1fffef8731e = 0 2024-01-21 16:24:16.127 - debug: zigbee.0 (2837) DeviceAvailability:Publish available for 0xf4b3b1fffef84d2d = false 2024-01-21 16:24:16.138 - debug: zigbee.0 (2837) DeviceAvailability:Publish LQ for 0xf4b3b1fffef84d2d = 0 2024-01-21 16:24:16.143 - debug: zigbee.0 (2837) DeviceAvailability:Publish available for 0xf4b3b1fffef87b6a = false 2024-01-21 16:24:16.148 - debug: zigbee.0 (2837) DeviceAvailability:Publish LQ for 0xf4b3b1fffef87b6a = 0 2024-01-21 16:24:16.152 - debug: zigbee.0 (2837) DeviceAvailability:Publish available for 0xf4b3b1fffef853ac = false 2024-01-21 16:24:16.176 - debug: zigbee.0 (2837) DeviceAvailability:Publish LQ for 0xf4b3b1fffef853ac = 0 2024-01-21 16:24:16.181 - debug: zigbee.0 (2837) DeviceAvailability:Publish available for 0x04cd15fffefe9ca8 = false 2024-01-21 16:24:16.185 - debug: zigbee.0 (2837) DeviceAvailability:Publish LQ for 0x04cd15fffefe9ca8 = 0 2024-01-21 16:24:16.191 - debug: zigbee.0 (2837) DeviceAvailability:Publish available for 0xa4c138c66404899e = false 2024-01-21 16:24:16.198 - debug: zigbee.0 (2837) DeviceAvailability:Publish LQ for 0xa4c138c66404899e = 0 2024-01-21 16:24:16.215 - info: zigbee.0 (2837) Zigbee: disabling joining new devices. 2024-01-21 16:24:19.977 - warn: zigbee.0 (2837) Failed to stop zigbee during startup 2024-01-21 16:24:20.282 - warn: host.raspberrypi instance system.adapter.zigbee.0 terminated due to SIGTERM 2024-01-21 16:24:20.282 - info: host.raspberrypi instance system.adapter.zigbee.0 terminated with code null () 2024-01-21 16:30:15.740 - info: host.raspberrypi instance system.adapter.zigbee.0 started with pid 1209 2024-01-21 16:30:22.216 - debug: zigbee.0 (1209) Redis Objects: Use Redis connection: 127.0.0.1:9001 2024-01-21 16:30:22.270 - debug: zigbee.0 (1209) Objects client ready ... initialize now 2024-01-21 16:30:22.274 - debug: zigbee.0 (1209) Objects create System PubSub Client 2024-01-21 16:30:22.275 - debug: zigbee.0 (1209) Objects create User PubSub Client 2024-01-21 16:30:22.336 - debug: zigbee.0 (1209) Objects client initialize lua scripts 2024-01-21 16:30:22.348 - debug: zigbee.0 (1209) Objects connected to redis: 127.0.0.1:9001 2024-01-21 16:30:22.403 - debug: zigbee.0 (1209) Redis States: Use Redis connection: 127.0.0.1:9000 2024-01-21 16:30:22.433 - debug: zigbee.0 (1209) States create System PubSub Client 2024-01-21 16:30:22.435 - debug: zigbee.0 (1209) States create User PubSub Client 2024-01-21 16:30:22.509 - debug: zigbee.0 (1209) States connected to redis: 127.0.0.1:9000 2024-01-21 16:30:22.575 - debug: zigbee.0 (1209) Plugin sentry Initialize Plugin (enabled=true) 2024-01-21 16:30:23.292 - info: zigbee.0 (1209) starting. Version 1.9.7 in /opt/iobroker/node_modules/iobroker.zigbee, node: v18.19.0, js-controller: 5.0.17 2024-01-21 16:30:23.324 - debug: zigbee.0 (1209) Using zigbee-herdsman with settings: {"network":{"panID":6754,"extendedPanID":[221,221,221,221,221,221,221,221],"channelList":[11],"networkKey":[1,3,5,7,9,11,13,15,0,2,4,6,8,10,12,13]},"databasePath":"/opt/iobroker/iobroker-data/zigbee_0/shepherd.db","backupPath":"/opt/iobroker/iobroker-data/zigbee_0/nvbackup.json","serialPort":{"baudRate":115200,"rtscts":false,"path":"/dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B0018E2F56A-if00","adapter":"zstack"},"adapter":{"forceStartWithInconsistentAdapterConfiguration":false},"legacy":false} 2024-01-21 16:30:23.412 - info: zigbee.0 (1209) delete old Backup files. keep only last 10 2024-01-21 16:30:23.414 - info: zigbee.0 (1209) Starting Zigbee npm ... 2024-01-21 16:30:23.462 - debug: zigbee.0 (1209) Starting zigbee-herdsman... 2024-01-21 16:30:24.299 - error: zigbee.0 (1209) Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B0018E2F56A-if00'" 2024-01-21 16:30:24.300 - error: zigbee.0 (1209) Failed to start Zigbee 2024-01-21 16:30:24.300 - error: zigbee.0 (1209) Error herdsman start 2024-01-21 16:30:24.327 - info: zigbee.0 (1209) Installed Version: iobroker.zigbee@1.9.7 2024-01-21 16:30:24.887 - debug: zigbee.0 (1209) Backup /opt/iobroker/iobroker-data/zigbee_0/backup_2024_01_21-16_30_23.tar.gz success 2024-01-21 16:30:34.304 - info: zigbee.0 (1209) Try to reconnect. 1 attempts left 2024-01-21 16:30:34.305 - info: zigbee.0 (1209) Starting Zigbee npm ... 2024-01-21 16:30:34.311 - debug: zigbee.0 (1209) Starting zigbee-herdsman... 2024-01-21 16:30:34.321 - error: zigbee.0 (1209) Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B0018E2F56A-if00'" 2024-01-21 16:30:34.323 - error: zigbee.0 (1209) Failed to start Zigbee 2024-01-21 16:30:34.323 - error: zigbee.0 (1209) Error herdsman start 2024-01-21 16:30:34.332 - info: zigbee.0 (1209) Installed Version: iobroker.zigbee@1.9.7 PI@raspberrypi:~ $ ^C -
@tapdance-0 sagte in Ziggbe sendet nicht mehr an empfängt aber noch Daten:
Trag beim Comport ein:
/dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_8eb6f719a99ded11ad35dca5a7669f5d-if00-port0Bei dir steht der alte Stick noch drin.
Und bring alles auf Stand.
sudo apt full-upgrade iob update all -
das Update hatte ich doch gestern schon angestoßen. Habe ich gerade noch mal angestoßen.
Wie ändere ich den Eintrag beim Comport?
Sorry bin kein kein Linux und Kommandozeilen Typ
-
@tapdance-0 sagte in Ziggbe sendet nicht mehr an empfängt aber noch Daten:
Wie ändere ich den Eintrag beim Comport?
In den Einstellungen des zigbee-Adapters. Ganz ohne Kommandozeile...
-
Das kommt wenn ich den update Befehl ausführe.
PI@raspberrypi:~ $ sudo apt full-upgrade iob update all Reading package lists... Done Building dependency tree... Done Reading state information... Done Calculating upgrade... Done The following packages were automatically installed and are no longer required: gtk2-engines-clearlookspix libcamera-apps libpisp0.0.1 Use 'sudo apt autoremove' to remove them. The following packages will be upgraded: pixflat-icons 1 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 1,120 kB of archives. After this operation, 209 kB of additional disk space will be used. Do you want to continue? [Y/n] y Get:1 http://archive.raspberrypi.com/debian bookworm/main arm64 pixflat-icons all 0.24 [1,120 kB] Fetched 1,120 kB in 0s (3,370 kB/s) Reading changelogs... Done (Reading database ... 155651 files and directories currently installed.) Preparing to unpack .../pixflat-icons_0.24_all.deb ... Unpacking pixflat-icons (0.24) over (0.23) ... Setting up pixflat-icons (0.24) ... gtk-update-icon-cache: Cache file created successfully. Used repository: all Error: unknown repository is active - "all". Known: Beta (latest), Stable (default) -
-
Updates müssten jetzt glaube ich alle durch sein. Wie ich den Pfad beim Comport eintrage weiß ich nicht hier die aktuellen Logs noch mal
======== Start marking the full check here ========= Skript v.2023-10-10 *** BASE SYSTEM *** Static hostname: raspberrypi Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.1.0-rpi7-rpi-v8 Architecture: arm64 Model : Raspberry Pi 4 Model B Rev 1.1 Docker : false Virtualization : none Kernel : aarch64 Userland : arm64 Systemuptime and Load: 17:06:09 up 6 min, 3 users, load average: 0.55, 0.84, 0.47 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Sun 2024-01-21 17:06:09 CET Universal time: Sun 2024-01-21 16:06:09 UTC RTC time: n/a Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** PI /home/PI PI adm dialout cdrom sudo audio video plugdev games users input render netdev lp admin gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 4.0G 1.7G 1.9G 1.3M 423M 2.3G Swap: 104M 0B 104M Total: 4.1G 1.7G 2.1G 3793 M total memory 1606 M used memory 1636 M active memory 170 M inactive memory 1858 M free memory 40 M buffer memory 363 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 1.6G 0 1.6G 0% /dev tmpfs tmpfs 380M 1.2M 379M 1% /run /dev/mmcblk0p2 ext4 28G 7.1G 20G 27% / tmpfs tmpfs 1.9G 8.0K 1.9G 1% /dev/shm tmpfs tmpfs 5.0M 16K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 510M 73M 438M 15% /boot/firmware tmpfs tmpfs 380M 32K 380M 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Sun Jan 21 16:59:56 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.ena ble_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=DC:A6:32:64:62:CC vc_mem. mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty 1 root=PARTUUID=9515910b-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splas h plymouth.ignore-serial-consoles [Sun Jan 21 16:59:59 2024] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Sun Jan 21 17:00:02 2024] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime,commit=600 `-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepag e=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 651M /var/ 194M /var/lib 185M /var/cache 172M /var/cache/apt 171M /var/log Archived and active journals take up 169.5M in the file system. /opt/iobroker/backups: 4.0K /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 373M /opt/iobroker/iobroker-data/ 270M /opt/iobroker/iobroker-data/files 78M /opt/iobroker/iobroker-data/files/icons-open-icon-library-png 73M /opt/iobroker/iobroker-data/backup-objects 67M /opt/iobroker/iobroker-data/files/javascript.admin The five largest files in iobroker-data are: 23M /opt/iobroker/iobroker-data/objects.jsonl 21M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.aaea95f8.js.map 8.3M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.aaea95f8.js 7.5M /opt/iobroker/iobroker-data/files/javascript.admin/static/js/691.26ff76ce.chunk.js.map 7.2M /opt/iobroker/iobroker-data/states.jsonl USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_8eb6f719a99ded11ad35dca5a7669f5d-if00-port0 *** NodeJS-Installation *** /usr/bin/nodejs v18.19.0 /usr/bin/node v18.19.0 /usr/bin/npm 10.2.3 /usr/bin/npx 10.2.3 /usr/bin/corepack 0.22.0 nodejs: Installed: 18.19.0-1nodesource1 Candidate: 18.19.0-1nodesource1 Version table: 18.19.0+dfsg-6~deb12u1 500 500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages *** 18.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 18.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.13.0+dfsg1-1 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages 18.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.17 admin: 6.12.0 javascript: 7.1.6 Adapters from github: 0 Adapter State + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alarm.0 : alarm : raspberrypi - enabled + system.adapter.backitup.0 : backitup : raspberrypi - enabled + system.adapter.broadlink2.0 : broadlink2 : raspberrypi - enabled + system.adapter.cloud.0 : cloud : raspberrypi - enabled + system.adapter.discovery.0 : discovery : raspberrypi - enabled + system.adapter.history.0 : history : raspberrypi - enabled + system.adapter.hm-rega.0 : hm-rega : raspberrypi - enabled + system.adapter.hm-rpc.0 : hm-rpc : raspberrypi - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : raspberrypi - enabled, port: 0 system.adapter.icons-icons8.0 : icons-icons8 : raspberrypi - disabled system.adapter.icons-material-png.0 : icons-material-png : raspberrypi - disabled system.adapter.icons-open-icon-library-png.0: icons-open-icon-library-png: raspberrypi - disabled + system.adapter.info.0 : info : raspberrypi - enabled + system.adapter.javascript.0 : javascript : raspberrypi - enabled system.adapter.mobile.0 : mobile : raspberrypi - disabled + system.adapter.ping.0 : ping : raspberrypi - enabled + system.adapter.sayit.0 : sayit : raspberrypi - enabled + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : raspberrypi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.synology.0 : synology : raspberrypi - enabled, port: 5000 + system.adapter.telegram.0 : telegram : raspberrypi - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.terminal.0 : terminal : raspberrypi - enabled, port: 8088, bind: 192.168.2.4, run as: admin + system.adapter.tr-064.0 : tr-064 : raspberrypi - enabled system.adapter.vis-bars.0 : vis-bars : raspberrypi - disabled system.adapter.vis-colorpicker.0 : vis-colorpicker : raspberrypi - disabled system.adapter.vis-fancyswitch.0 : vis-fancyswitch : raspberrypi - disabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : raspberrypi - disabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : raspberrypi - disabled system.adapter.vis-players.0 : vis-players : raspberrypi - enabled system.adapter.vis.0 : vis : raspberrypi - enabled + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.whatsapp-cmb.0 : whatsapp-cmb : raspberrypi - enabled + system.adapter.wifilight.0 : wifilight : raspberrypi - enabled + system.adapter.yahka.0 : yahka : raspberrypi - enabled + system.adapter.zigbee.0 : zigbee : raspberrypi - enabled, port: /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B0018E2F56A-if00 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.hm-rpc.0 : hm-rpc : raspberrypi - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : raspberrypi - enabled, port: 0 + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : raspberrypi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.synology.0 : synology : raspberrypi - enabled, port: 5000 + system.adapter.telegram.0 : telegram : raspberrypi - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.terminal.0 : terminal : raspberrypi - enabled, port: 8088, bind: 192.168.2.4, run as: admin + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : raspberrypi - enabled, port: /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B0018E2F56A-if00 ioBroker-Repositories Beta (latest) : http://download.iobroker.net/sources-dist-latest.json Stable (default): http://download.iobroker.net/sources-dist.json Active repo(s): Stable (default) Installed ioBroker-Instances Used repository: Stable (default) Adapter "admin" : 6.12.0 , installed 6.12.0 Adapter "alarm" : 3.6.0 , installed 3.6.0 Adapter "backitup" : 2.9.8 , installed 2.9.8 Adapter "broadlink2" : 2.1.5 , installed 2.1.5 Adapter "cloud" : 4.4.1 , installed 4.4.1 Adapter "discovery" : 4.2.0 , installed 4.2.0 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "hm-rega" : 4.0.0 , installed 4.0.0 Adapter "hm-rpc" : 1.15.19 , installed 1.15.19 Adapter "icons-icons8" : 0.0.1 , installed 0.0.1 Adapter "icons-material-png": 0.1.0, installed 0.1.0 Adapter "icons-open-icon-library-png": 0.1.2, installed 0.1.2 Adapter "info" : 2.0.0 , installed 2.0.0 Adapter "javascript" : 7.1.6 , installed 7.1.6 Controller "js-controller": 5.0.17 , installed 5.0.17 Adapter "mobile" : 1.0.1 , installed 1.0.1 Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "sayit" : 3.0.5 , installed 3.0.5 Adapter "shelly" : 6.6.1 , installed 6.6.1 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 6.6.0 , installed 6.6.0 Adapter "sonoff" : 3.0.3 , installed 3.0.3 Adapter "synology" : 3.0.1 , installed 3.0.1 Adapter "telegram" : 3.0.1 , installed 3.0.1 Adapter "terminal" : 1.0.0 , installed 1.0.0 Adapter "tr-064" : 4.2.18 , installed 4.2.18 Adapter "vis" : 1.5.4 , installed 1.5.4 Adapter "vis-bars" : 0.1.4 , installed 0.1.4 Adapter "vis-colorpicker": 2.0.3 , installed 2.0.3 Adapter "vis-fancyswitch": 1.1.0 , installed 1.1.0 Adapter "vis-hqwidgets": 1.4.0 , installed 1.4.0 Adapter "vis-jqui-mfd" : 1.0.12 , installed 1.0.12 Adapter "vis-players" : 0.1.6 , installed 0.1.6 Adapter "web" : 6.1.10 , installed 6.1.10 Adapter "whatsapp-cmb" : 0.2.3 , installed 0.2.3 Adapter "wifilight" : 1.1.4 , installed 1.1.4 Adapter "ws" : 2.5.8 , installed 2.5.8 Adapter "yahka" : 1.0.3 , installed 1.0.3 Adapter "zigbee" : 1.10.1 , installed 1.10.1 Objects and States Please stand by - This may take a while Objects: 5503 States: 4905 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian bookworm InRelease Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease Hit:3 http://deb.debian.org/debian bookworm-updates InRelease Hit:4 http://archive.raspberrypi.com/debian bookworm InRelease Hit:5 https://deb.nodesource.com/node_18.x nodistro InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 18478 778/sshd: /usr/sbin tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 17466 768/cupsd tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 16860 769/iobroker.js-con tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 17647 769/iobroker.js-con tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 17854 1111/io.sonoff.0 tcp 0 0 192.168.2.4:2001 0.0.0.0:* LISTEN 1001 16989 1042/io.hm-rpc.0 tcp 0 0 192.168.2.4:2010 0.0.0.0:* LISTEN 1001 15037 1049/io.hm-rpc.1 tcp6 0 0 ::1:631 :::* LISTEN 0 17465 768/cupsd tcp6 0 0 :::22 :::* LISTEN 0 18480 778/sshd: /usr/sbin tcp6 0 0 :::8088 :::* LISTEN 1001 22647 1525/io.terminal.0 tcp6 0 0 :::8081 :::* LISTEN 1001 17701 946/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1001 22866 1945/io.web.0 tcp6 0 0 :::38469 :::* LISTEN 1001 20981 1983/io.yahka.0 udp 0 0 0.0.0.0:44484 0.0.0.0:* 104 17409 580/avahi-daemon: r udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 17826 1091/io.shelly.0 udp 0 0 0.0.0.0:631 0.0.0.0:* 0 16777 818/cups-browsed udp 0 0 0.0.0.0:15001 0.0.0.0:* 1001 17236 1286/io.broadlink2. udp 0 0 0.0.0.0:44173 0.0.0.0:* 1001 17239 1286/io.broadlink2. udp 0 0 0.0.0.0:56537 0.0.0.0:* 1001 23299 1286/io.broadlink2. udp 0 0 192.168.2.4:5353 0.0.0.0:* 1001 19061 1146/io.tr-064.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 12287 580/avahi-daemon: r udp6 0 0 :::50851 :::* 104 17410 580/avahi-daemon: r udp6 0 0 fe80::67d1:e1cb:7ef:546 :::* 0 17623 706/NetworkManager udp6 0 0 :::5353 :::* 104 12288 580/avahi-daemon: r *** Log File - Last 25 Lines *** 2024-01-21 17:06:49.735 - warn: sonoff.0 (1111) Client [Pool Pumpe] has invalid password or username 2024-01-21 17:06:51.462 - warn: sonoff.0 (1111) Client [Muschel Terrasse] has invalid password or username 2024-01-21 17:06:52.102 - warn: sonoff.0 (1111) Client [Pavillon Beleuchtung] has invalid password or username 2024-01-21 17:06:54.224 - warn: shelly.0 (1091) [authEnabled] 192.168.2.214 (shellydimmer2 / shellydimmer2-8CAAB54C4B57 / SHDM-2#8CAAB54C4B57#1): This device is not protected via restricted login (see adapter documentation for details) 2024-01-21 17:06:54.227 - warn: sonoff.0 (1111) Client [Taster-Schlafzimmer-Bett-L] has invalid password or username 2024-01-21 17:06:54.230 - warn: sonoff.0 (1111) Client [Wohnzimmer-Vitrine] has invalid password or username 2024-01-21 17:06:54.288 - warn: shelly.0 (1091) [authEnabled] 192.168.2.226 (shellydimmer2 / shellydimmer2-8CAAB54C4E21 / SHDM-2#8CAAB54C4E21#1): This device is not protected via restricted login (see adapter documentation for details) 2024-01-21 17:06:54.315 - warn: shelly.0 (1091) [authEnabled] 192.168.2.180 (shellydimmer / shellydimmer-D3E918 / SHDM-1#D3E918#1): This device is not protected via restricted login (see adapter documentation for details) 2024-01-21 17:06:56.433 - warn: sonoff.0 (1111) Client [PC-Buero] has invalid password or username 2024-01-21 17:07:03.413 - warn: shelly.0 (1091) State value to set for "shelly.0.SHDM-2#8CAAB54C4E21#1.temperatureF" has value "141.05" greater than max "100" 2024-01-21 17:07:06.195 - warn: shelly.0 (1091) [authEnabled] 192.168.2.180 (shellydimmer / shellydimmer-D3E918 / SHDM-1#D3E918#1): This device is not protected via restricted login (see adapter documentation for details) 2024-01-21 17:07:06.513 - warn: shelly.0 (1091) [authEnabled] 192.168.2.214 (shellydimmer2 / shellydimmer2-8CAAB54C4B57 / SHDM-2#8CAAB54C4B57#1): This device is not protected via restricted login (see adapter documentation for details) 2024-01-21 17:07:07.480 - warn: shelly.0 (1091) [authEnabled] 192.168.2.226 (shellydimmer2 / shellydimmer2-8CAAB54C4E21 / SHDM-2#8CAAB54C4E21#1): This device is not protected via restricted login (see adapter documentation for details) 2024-01-21 17:07:14.240 - warn: sonoff.0 (1111) Client [Pool Beleuchtung] has invalid password or username 2024-01-21 17:07:15.493 - warn: sonoff.0 (1111) Client [Pool Pumpe] has invalid password or username 2024-01-21 17:07:17.252 - warn: sonoff.0 (1111) Client [Muschel Terrasse] has invalid password or username 2024-01-21 17:07:17.896 - warn: sonoff.0 (1111) Client [Pavillon Beleuchtung] has invalid password or username 2024-01-21 17:07:18.796 - warn: shelly.0 (1091) [authEnabled] 192.168.2.180 (shellydimmer / shellydimmer-D3E918 / SHDM-1#D3E918#1): This device is not protected via restricted login (see adapter documentation for details) 2024-01-21 17:07:20.186 - warn: sonoff.0 (1111) Client [Wohnzimmer-Vitrine] has invalid password or username 2024-01-21 17:07:20.188 - warn: sonoff.0 (1111) Client [Taster-Schlafzimmer-Bett-L] has invalid password or username 2024-01-21 17:07:20.405 - warn: shelly.0 (1091) [authEnabled] 192.168.2.214 (shellydimmer2 / shellydimmer2-8CAAB54C4B57 / SHDM-2#8CAAB54C4B57#1): This device is not protected via restricted login (see adapter documentation for details) 2024-01-21 17:07:22.524 - warn: sonoff.0 (1111) Client [PC-Buero] has invalid password or username 2024-01-21 17:07:26.175 - warn: shelly.0 (1091) [authEnabled] 192.168.2.226 (shellydimmer2 / shellydimmer2-8CAAB54C4E21 / SHDM-2#8CAAB54C4E21#1): This device is not protected via restricted login (see adapter documentation for details) 2024-01-21 17:07:32.167 - warn: shelly.0 (1091) [authEnabled] 192.168.2.180 (shellydimmer / shellydimmer-D3E918 / SHDM-1#D3E918#1): This device is not protected via restricted login (see adapter documentation for details) 2024-01-21 17:07:33.565 - warn: shelly.0 (1091) [authEnabled] 192.168.2.214 (shellydimmer2 / shellydimmer2-8CAAB54C4B57 / SHDM-2#8CAAB54C4B57#1): This device is not protected via restricted login (see adapter documentation for details) ============ Mark until here for C&P ============= iob diag has finished.PI@raspberrypi:~ $ iob logs | grep zigbee 2024-01-21 16:58:32.729 - info: host.raspberrypi stopInstance system.adapter.zigbee.0 (force=false, process=true) 2024-01-21 16:58:32.736 - info: zigbee.0 (5918) Got terminate signal TERMINATE_YOURSELF 2024-01-21 16:58:32.855 - info: host.raspberrypi stopInstance system.adapter.zigbee.0 send kill signal 2024-01-21 16:58:33.857 - info: host.raspberrypi stopInstance system.adapter.zigbee.0 killing pid 5918 2024-01-21 16:58:35.954 - info: host.raspberrypi instance system.adapter.zigbee.0 started with pid 6066 2024-01-21 16:58:32.738 - info: zigbee.0 (5918) cleaned everything up... 2024-01-21 16:58:32.772 - info: zigbee.0 (5918) Zigbee: disabling joining new devices. 2024-01-21 16:58:32.773 - debug: zigbee.0 (5918) DeviceAvailability:Publish available for 0x00158d00044d8e0b = false 2024-01-21 16:58:32.785 - debug: zigbee.0 (5918) DeviceAvailability:Publish LQ for 0x00158d00044d8e0b = 0 2024-01-21 16:58:32.797 - debug: zigbee.0 (5918) DeviceAvailability:Publish available for 0x00158d000257bae7 = false 2024-01-21 16:58:32.810 - debug: zigbee.0 (5918) DeviceAvailability:Publish LQ for 0x00158d000257bae7 = 0 2024-01-21 16:58:32.820 - debug: zigbee.0 (5918) DeviceAvailability:Publish available for 0x00158d00045f7cee = false 2024-01-21 16:58:32.825 - debug: zigbee.0 (5918) DeviceAvailability:Publish LQ for 0x00158d00045f7cee = 0 2024-01-21 16:58:32.831 - debug: zigbee.0 (5918) DeviceAvailability:Publish available for 0x00158d0004521481 = false 2024-01-21 16:58:32.836 - debug: zigbee.0 (5918) DeviceAvailability:Publish LQ for 0x00158d0004521481 = 0 2024-01-21 16:58:32.843 - debug: zigbee.0 (5918) DeviceAvailability:Publish available for 0x00158d000461b53e = false 2024-01-21 16:58:32.849 - debug: zigbee.0 (5918) DeviceAvailability:Publish LQ for 0x00158d000461b53e = 0 2024-01-21 16:58:32.855 - debug: zigbee.0 (5918) DeviceAvailability:Publish available for 0x680ae2fffec91ea4 = false 2024-01-21 16:58:32.860 - debug: zigbee.0 (5918) DeviceAvailability:Publish LQ for 0x680ae2fffec91ea4 = 0 2024-01-21 16:58:32.867 - debug: zigbee.0 (5918) DeviceAvailability:Publish available for 0x588e81fffe2b8762 = false 2024-01-21 16:58:32.873 - debug: zigbee.0 (5918) DeviceAvailability:Publish LQ for 0x588e81fffe2b8762 = 0 2024-01-21 16:58:32.880 - debug: zigbee.0 (5918) DeviceAvailability:Publish available for 0x680ae2fffe924d57 = false 2024-01-21 16:58:32.885 - debug: zigbee.0 (5918) DeviceAvailability:Publish LQ for 0x680ae2fffe924d57 = 0 2024-01-21 16:58:32.892 - debug: zigbee.0 (5918) DeviceAvailability:Publish available for 0x00158d00045eb708 = false 2024-01-21 16:58:32.897 - debug: zigbee.0 (5918) DeviceAvailability:Publish LQ for 0x00158d00045eb708 = 0 2024-01-21 16:58:32.905 - debug: zigbee.0 (5918) DeviceAvailability:Publish available for 0x00158d0002a71e25 = false 2024-01-21 16:58:32.909 - debug: zigbee.0 (5918) DeviceAvailability:Publish LQ for 0x00158d0002a71e25 = 0 2024-01-21 16:58:32.915 - debug: zigbee.0 (5918) DeviceAvailability:Publish available for 0x04cf8cdf3c794764 = false 2024-01-21 16:58:32.919 - debug: zigbee.0 (5918) DeviceAvailability:Publish LQ for 0x04cf8cdf3c794764 = 0 2024-01-21 16:58:32.925 - debug: zigbee.0 (5918) DeviceAvailability:Publish available for 0x04cf8cdf3c7946a1 = false 2024-01-21 16:58:32.929 - debug: zigbee.0 (5918) DeviceAvailability:Publish LQ for 0x04cf8cdf3c7946a1 = 0 2024-01-21 16:58:32.933 - debug: zigbee.0 (5918) DeviceAvailability:Publish available for 0x00158d00045f8d3d = false 2024-01-21 16:58:32.938 - debug: zigbee.0 (5918) DeviceAvailability:Publish LQ for 0x00158d00045f8d3d = 0 2024-01-21 16:58:32.943 - debug: zigbee.0 (5918) DeviceAvailability:Publish available for 0x00158d0004597653 = false 2024-01-21 16:58:32.947 - debug: zigbee.0 (5918) DeviceAvailability:Publish LQ for 0x00158d0004597653 = 0 2024-01-21 16:58:32.952 - debug: zigbee.0 (5918) DeviceAvailability:Publish available for 0x842e14fffe768d41 = false 2024-01-21 16:58:32.956 - debug: zigbee.0 (5918) DeviceAvailability:Publish LQ for 0x842e14fffe768d41 = 0 2024-01-21 16:58:32.962 - debug: zigbee.0 (5918) DeviceAvailability:Publish available for 0xbc33acfffe2ab392 = false 2024-01-21 16:58:32.965 - debug: zigbee.0 (5918) DeviceAvailability:Publish LQ for 0xbc33acfffe2ab392 = 0 2024-01-21 16:58:32.970 - debug: zigbee.0 (5918) DeviceAvailability:Publish available for 0x04cf8cdf3c7b5255 = false 2024-01-21 16:58:32.974 - debug: zigbee.0 (5918) DeviceAvailability:Publish LQ for 0x04cf8cdf3c7b5255 = 0 2024-01-21 16:58:32.980 - debug: zigbee.0 (5918) DeviceAvailability:Publish available for 0x04cf8cdf3c7b51f7 = false 2024-01-21 16:58:32.985 - debug: zigbee.0 (5918) DeviceAvailability:Publish LQ for 0x04cf8cdf3c7b51f7 = 0 2024-01-21 16:58:32.990 - debug: zigbee.0 (5918) DeviceAvailability:Publish available for 0x04cf8cdf3c78b7ba = false 2024-01-21 16:58:32.993 - debug: zigbee.0 (5918) DeviceAvailability:Publish LQ for 0x04cf8cdf3c78b7ba = 0 2024-01-21 16:58:32.998 - debug: zigbee.0 (5918) DeviceAvailability:Publish available for 0x00158d000461da61 = false 2024-01-21 16:58:33.001 - debug: zigbee.0 (5918) DeviceAvailability:Publish LQ for 0x00158d000461da61 = 0 2024-01-21 16:58:33.005 - debug: zigbee.0 (5918) DeviceAvailability:Publish available for 0xf4b3b1fffef87315 = false 2024-01-21 16:58:33.008 - debug: zigbee.0 (5918) DeviceAvailability:Publish LQ for 0xf4b3b1fffef87315 = 0 2024-01-21 16:58:33.012 - debug: zigbee.0 (5918) DeviceAvailability:Publish available for 0xf4b3b1fffef8731e = false 2024-01-21 16:58:33.016 - debug: zigbee.0 (5918) DeviceAvailability:Publish LQ for 0xf4b3b1fffef8731e = 0 2024-01-21 16:58:33.019 - debug: zigbee.0 (5918) DeviceAvailability:Publish available for 0xf4b3b1fffef84d2d = false 2024-01-21 16:58:33.022 - debug: zigbee.0 (5918) DeviceAvailability:Publish LQ for 0xf4b3b1fffef84d2d = 0 2024-01-21 16:58:33.027 - debug: zigbee.0 (5918) DeviceAvailability:Publish available for 0xf4b3b1fffef87b6a = false 2024-01-21 16:58:33.030 - debug: zigbee.0 (5918) DeviceAvailability:Publish LQ for 0xf4b3b1fffef87b6a = 0 2024-01-21 16:58:33.033 - debug: zigbee.0 (5918) DeviceAvailability:Publish available for 0xf4b3b1fffef853ac = false 2024-01-21 16:58:33.036 - debug: zigbee.0 (5918) DeviceAvailability:Publish LQ for 0xf4b3b1fffef853ac = 0 2024-01-21 16:58:33.040 - debug: zigbee.0 (5918) DeviceAvailability:Publish available for 0x04cd15fffefe9ca8 = false 2024-01-21 16:58:33.043 - debug: zigbee.0 (5918) DeviceAvailability:Publish LQ for 0x04cd15fffefe9ca8 = 0 2024-01-21 16:58:33.046 - debug: zigbee.0 (5918) DeviceAvailability:Publish available for 0xa4c138c66404899e = false 2024-01-21 16:58:33.049 - debug: zigbee.0 (5918) DeviceAvailability:Publish LQ for 0xa4c138c66404899e = 0 2024-01-21 16:58:39.403 - warn: zigbee.0 (5918) Failed to stop zigbee during startup 2024-01-21 16:58:39.405 - info: zigbee.0 (5918) terminating 2024-01-21 16:58:39.408 - debug: zigbee.0 (5918) Plugin sentry destroyed 2024-01-21 16:58:39.409 - info: zigbee.0 (5918) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2024-01-21 16:58:39.412 - info: zigbee.0 (5918) terminating 2024-01-21 16:58:39.502 - warn: zigbee.0 (5918) Got terminate signal. Checking desired PID: 0 vs own PID 5918 2024-01-21 16:58:39.504 - warn: zigbee.0 (5918) Got terminate signal. Checking desired PID: 6066 vs own PID 5918 2024-01-21 16:58:39.560 - info: zigbee.0 (5918) debug devices set to [] 2024-01-21 16:58:40.065 - info: host.raspberrypi instance system.adapter.zigbee.0 terminated by request of the instance itself and will not be restarted, before user restarts it. 2024-01-21 16:58:40.065 - info: host.raspberrypi Do not restart adapter system.adapter.zigbee.0 because desired by instance 2024-01-21 16:58:40.406 - debug: zigbee.0 (6066) Redis Objects: Use Redis connection: 127.0.0.1:9001 2024-01-21 16:58:40.452 - debug: zigbee.0 (6066) Objects client ready ... initialize now 2024-01-21 16:58:40.455 - debug: zigbee.0 (6066) Objects create System PubSub Client 2024-01-21 16:58:40.457 - debug: zigbee.0 (6066) Objects create User PubSub Client 2024-01-21 16:58:40.538 - debug: zigbee.0 (6066) Objects client initialize lua scripts 2024-01-21 16:58:40.549 - debug: zigbee.0 (6066) Objects connected to redis: 127.0.0.1:9001 2024-01-21 16:58:40.596 - debug: zigbee.0 (6066) Redis States: Use Redis connection: 127.0.0.1:9000 2024-01-21 16:58:40.616 - debug: zigbee.0 (6066) States create System PubSub Client 2024-01-21 16:58:40.617 - debug: zigbee.0 (6066) States create User PubSub Client 2024-01-21 16:58:40.688 - debug: zigbee.0 (6066) States connected to redis: 127.0.0.1:9000 2024-01-21 16:58:40.742 - debug: zigbee.0 (6066) Plugin sentry Initialize Plugin (enabled=true) 2024-01-21 16:58:41.361 - info: zigbee.0 (6066) starting. Version 1.10.1 in /opt/iobroker/node_modules/iobroker.zigbee, node: v18.19.0, js-controller: 5.0.17 2024-01-21 16:58:41.396 - debug: zigbee.0 (6066) Using zigbee-herdsman with settings: {"network":{"panID":6754,"extendedPanID":[221,221,221,221,221,221,221,221],"channelList":[11],"networkKey":[1,3,5,7,9,11,13,15,0,2,4,6,8,10,12,13]},"databasePath":"/opt/iobroker/iobroker-data/zigbee_0/shepherd.db","backupPath":"/opt/iobroker/iobroker-data/zigbee_0/nvbackup.json","serialPort":{"baudRate":115200,"rtscts":false,"path":"/dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B0018E2F56A-if00","adapter":"zstack"},"adapter":{"forceStartWithInconsistentAdapterConfiguration":false},"legacy":false} 2024-01-21 16:58:41.477 - info: zigbee.0 (6066) delete old Backup files. keep only last 10 2024-01-21 16:58:41.480 - info: zigbee.0 (6066) Starting Zigbee npm ... 2024-01-21 16:58:41.526 - debug: zigbee.0 (6066) Starting zigbee-herdsman... 2024-01-21 16:58:41.876 - error: zigbee.0 (6066) Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B0018E2F56A-if00'" 2024-01-21 16:58:41.877 - error: zigbee.0 (6066) Failed to start Zigbee 2024-01-21 16:58:41.877 - error: zigbee.0 (6066) Error herdsman start 2024-01-21 16:58:41.881 - info: zigbee.0 (6066) Installed Version: iobroker.zigbee@1.10.1 2024-01-21 16:58:42.387 - debug: zigbee.0 (6066) Backup /opt/iobroker/iobroker-data/zigbee_0/backup_2024_01_21-16_58_41.tar.gz success 2024-01-21 16:58:51.881 - info: zigbee.0 (6066) Try to reconnect. 1 attempts left 2024-01-21 16:58:51.882 - info: zigbee.0 (6066) Starting Zigbee npm ... 2024-01-21 16:58:51.887 - debug: zigbee.0 (6066) Starting zigbee-herdsman... 2024-01-21 16:58:51.898 - error: zigbee.0 (6066) Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B0018E2F56A-if00'" 2024-01-21 16:58:51.899 - error: zigbee.0 (6066) Failed to start Zigbee 2024-01-21 16:58:51.899 - error: zigbee.0 (6066) Error herdsman start 2024-01-21 16:58:51.907 - info: zigbee.0 (6066) Installed Version: iobroker.zigbee@1.10.1 2024-01-21 16:59:25.780 - info: zigbee.0 (6066) cleaned everything up... 2024-01-21 16:59:25.828 - info: host.raspberrypi stopInstance system.adapter.zigbee.0 (force=false, process=false) 2024-01-21 16:59:25.876 - info: zigbee.0 (6066) Zigbee: disabling joining new devices. 2024-01-21 16:59:25.877 - debug: zigbee.0 (6066) DeviceAvailability:Publish available for 0x00158d00044d8e0b = false 2024-01-21 16:59:25.893 - debug: zigbee.0 (6066) DeviceAvailability:Publish LQ for 0x00158d00044d8e0b = 0 2024-01-21 16:59:25.905 - debug: zigbee.0 (6066) DeviceAvailability:Publish available for 0x00158d000257bae7 = false 2024-01-21 16:59:25.916 - debug: zigbee.0 (6066) DeviceAvailability:Publish LQ for 0x00158d000257bae7 = 0 2024-01-21 16:59:25.928 - debug: zigbee.0 (6066) DeviceAvailability:Publish available for 0x00158d00045f7cee = false 2024-01-21 16:59:25.934 - debug: zigbee.0 (6066) DeviceAvailability:Publish LQ for 0x00158d00045f7cee = 0 2024-01-21 16:59:25.964 - debug: zigbee.0 (6066) DeviceAvailability:Publish available for 0x00158d0004521481 = false 2024-01-21 16:59:25.968 - debug: zigbee.0 (6066) DeviceAvailability:Publish LQ for 0x00158d0004521481 = 0 2024-01-21 16:59:25.974 - debug: zigbee.0 (6066) DeviceAvailability:Publish available for 0x00158d000461b53e = false 2024-01-21 16:59:25.979 - debug: zigbee.0 (6066) DeviceAvailability:Publish LQ for 0x00158d000461b53e = 0 2024-01-21 16:59:25.993 - debug: zigbee.0 (6066) DeviceAvailability:Publish available for 0x680ae2fffec91ea4 = false 2024-01-21 16:59:26.015 - debug: zigbee.0 (6066) DeviceAvailability:Publish LQ for 0x680ae2fffec91ea4 = 0 2024-01-21 16:59:26.024 - debug: zigbee.0 (6066) DeviceAvailability:Publish available for 0x588e81fffe2b8762 = false 2024-01-21 16:59:26.030 - debug: zigbee.0 (6066) DeviceAvailability:Publish LQ for 0x588e81fffe2b8762 = 0 2024-01-21 16:59:26.038 - debug: zigbee.0 (6066) DeviceAvailability:Publish available for 0x680ae2fffe924d57 = false 2024-01-21 16:59:26.044 - debug: zigbee.0 (6066) DeviceAvailability:Publish LQ for 0x680ae2fffe924d57 = 0 2024-01-21 16:59:26.063 - debug: zigbee.0 (6066) DeviceAvailability:Publish available for 0x00158d00045eb708 = false 2024-01-21 16:59:26.071 - debug: zigbee.0 (6066) DeviceAvailability:Publish LQ for 0x00158d00045eb708 = 0 2024-01-21 16:59:26.077 - debug: zigbee.0 (6066) DeviceAvailability:Publish available for 0x00158d0002a71e25 = false 2024-01-21 16:59:26.082 - debug: zigbee.0 (6066) DeviceAvailability:Publish LQ for 0x00158d0002a71e25 = 0 2024-01-21 16:59:26.088 - debug: zigbee.0 (6066) DeviceAvailability:Publish available for 0x04cf8cdf3c794764 = false 2024-01-21 16:59:26.092 - debug: zigbee.0 (6066) DeviceAvailability:Publish LQ for 0x04cf8cdf3c794764 = 0 2024-01-21 16:59:26.096 - debug: zigbee.0 (6066) DeviceAvailability:Publish available for 0x04cf8cdf3c7946a1 = false 2024-01-21 16:59:26.103 - debug: zigbee.0 (6066) DeviceAvailability:Publish LQ for 0x04cf8cdf3c7946a1 = 0 2024-01-21 16:59:26.109 - debug: zigbee.0 (6066) DeviceAvailability:Publish available for 0x00158d00045f8d3d = false 2024-01-21 16:59:26.112 - debug: zigbee.0 (6066) DeviceAvailability:Publish LQ for 0x00158d00045f8d3d = 0 2024-01-21 16:59:26.125 - debug: zigbee.0 (6066) DeviceAvailability:Publish available for 0x00158d0004597653 = false 2024-01-21 16:59:26.129 - debug: zigbee.0 (6066) DeviceAvailability:Publish LQ for 0x00158d0004597653 = 0 2024-01-21 16:59:26.134 - debug: zigbee.0 (6066) DeviceAvailability:Publish available for 0x842e14fffe768d41 = false 2024-01-21 16:59:26.139 - debug: zigbee.0 (6066) DeviceAvailability:Publish LQ for 0x842e14fffe768d41 = 0 2024-01-21 16:59:26.144 - debug: zigbee.0 (6066) DeviceAvailability:Publish available for 0xbc33acfffe2ab392 = false 2024-01-21 16:59:26.147 - debug: zigbee.0 (6066) DeviceAvailability:Publish LQ for 0xbc33acfffe2ab392 = 0 2024-01-21 16:59:26.155 - debug: zigbee.0 (6066) DeviceAvailability:Publish available for 0x04cf8cdf3c7b5255 = false 2024-01-21 16:59:26.161 - debug: zigbee.0 (6066) DeviceAvailability:Publish LQ for 0x04cf8cdf3c7b5255 = 0 2024-01-21 16:59:26.167 - debug: zigbee.0 (6066) DeviceAvailability:Publish available for 0x04cf8cdf3c7b51f7 = false 2024-01-21 16:59:26.173 - debug: zigbee.0 (6066) DeviceAvailability:Publish LQ for 0x04cf8cdf3c7b51f7 = 0 2024-01-21 16:59:26.182 - debug: zigbee.0 (6066) DeviceAvailability:Publish available for 0x04cf8cdf3c78b7ba = false 2024-01-21 16:59:26.186 - debug: zigbee.0 (6066) DeviceAvailability:Publish LQ for 0x04cf8cdf3c78b7ba = 0 2024-01-21 16:59:26.197 - debug: zigbee.0 (6066) DeviceAvailability:Publish available for 0x00158d000461da61 = false 2024-01-21 16:59:26.201 - debug: zigbee.0 (6066) DeviceAvailability:Publish LQ for 0x00158d000461da61 = 0 2024-01-21 16:59:26.206 - debug: zigbee.0 (6066) DeviceAvailability:Publish available for 0xf4b3b1fffef87315 = false 2024-01-21 16:59:26.211 - debug: zigbee.0 (6066) DeviceAvailability:Publish LQ for 0xf4b3b1fffef87315 = 0 2024-01-21 16:59:26.216 - debug: zigbee.0 (6066) DeviceAvailability:Publish available for 0xf4b3b1fffef8731e = false 2024-01-21 16:59:26.220 - debug: zigbee.0 (6066) DeviceAvailability:Publish LQ for 0xf4b3b1fffef8731e = 0 2024-01-21 16:59:26.225 - debug: zigbee.0 (6066) DeviceAvailability:Publish available for 0xf4b3b1fffef84d2d = false 2024-01-21 16:59:26.229 - debug: zigbee.0 (6066) DeviceAvailability:Publish LQ for 0xf4b3b1fffef84d2d = 0 2024-01-21 16:59:26.234 - debug: zigbee.0 (6066) DeviceAvailability:Publish available for 0xf4b3b1fffef87b6a = false 2024-01-21 16:59:26.238 - debug: zigbee.0 (6066) DeviceAvailability:Publish LQ for 0xf4b3b1fffef87b6a = 0 2024-01-21 16:59:26.246 - debug: zigbee.0 (6066) DeviceAvailability:Publish available for 0xf4b3b1fffef853ac = false 2024-01-21 16:59:26.249 - debug: zigbee.0 (6066) DeviceAvailability:Publish LQ for 0xf4b3b1fffef853ac = 0 2024-01-21 16:59:26.257 - debug: zigbee.0 (6066) DeviceAvailability:Publish available for 0x04cd15fffefe9ca8 = false 2024-01-21 16:59:26.261 - debug: zigbee.0 (6066) DeviceAvailability:Publish LQ for 0x04cd15fffefe9ca8 = 0 2024-01-21 16:59:26.268 - debug: zigbee.0 (6066) DeviceAvailability:Publish available for 0xa4c138c66404899e = false 2024-01-21 16:59:26.271 - debug: zigbee.0 (6066) DeviceAvailability:Publish LQ for 0xa4c138c66404899e = 0 2024-01-21 16:59:31.550 - warn: zigbee.0 (6066) Failed to stop zigbee during startup 2024-01-21 16:59:31.682 - error: zigbee.0 (6066) Objects database error: write EPIPE 2024-01-21 16:59:31.751 - info: zigbee.0 (6066) terminating 2024-01-21 16:59:31.752 - debug: zigbee.0 (6066) Plugin sentry destroyed 2024-01-21 16:59:31.753 - info: zigbee.0 (6066) Terminated (NO_ERROR): Without reason 2024-01-21 16:59:31.753 - info: zigbee.0 (6066) terminating 2024-01-21 16:59:32.687 - info: zigbee.0 (6066) terminating with timeout 2024-01-21 17:01:20.456 - info: host.raspberrypi instance system.adapter.zigbee.0 started with pid 1190 2024-01-21 17:01:27.027 - debug: zigbee.0 (1190) Redis Objects: Use Redis connection: 127.0.0.1:9001 2024-01-21 17:01:27.080 - debug: zigbee.0 (1190) Objects client ready ... initialize now 2024-01-21 17:01:27.084 - debug: zigbee.0 (1190) Objects create System PubSub Client 2024-01-21 17:01:27.086 - debug: zigbee.0 (1190) Objects create User PubSub Client 2024-01-21 17:01:27.162 - debug: zigbee.0 (1190) Objects client initialize lua scripts 2024-01-21 17:01:27.176 - debug: zigbee.0 (1190) Objects connected to redis: 127.0.0.1:9001 2024-01-21 17:01:27.225 - debug: zigbee.0 (1190) Redis States: Use Redis connection: 127.0.0.1:9000 2024-01-21 17:01:27.247 - debug: zigbee.0 (1190) States create System PubSub Client 2024-01-21 17:01:27.248 - debug: zigbee.0 (1190) States create User PubSub Client 2024-01-21 17:01:27.339 - debug: zigbee.0 (1190) States connected to redis: 127.0.0.1:9000 2024-01-21 17:01:27.397 - debug: zigbee.0 (1190) Plugin sentry Initialize Plugin (enabled=true) 2024-01-21 17:01:28.242 - info: zigbee.0 (1190) starting. Version 1.10.1 in /opt/iobroker/node_modules/iobroker.zigbee, node: v18.19.0, js-controller: 5.0.17 2024-01-21 17:01:28.283 - debug: zigbee.0 (1190) Using zigbee-herdsman with settings: {"network":{"panID":6754,"extendedPanID":[221,221,221,221,221,221,221,221],"channelList":[11],"networkKey":[1,3,5,7,9,11,13,15,0,2,4,6,8,10,12,13]},"databasePath":"/opt/iobroker/iobroker-data/zigbee_0/shepherd.db","backupPath":"/opt/iobroker/iobroker-data/zigbee_0/nvbackup.json","serialPort":{"baudRate":115200,"rtscts":false,"path":"/dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B0018E2F56A-if00","adapter":"zstack"},"adapter":{"forceStartWithInconsistentAdapterConfiguration":false},"legacy":false} 2024-01-21 17:01:28.387 - info: zigbee.0 (1190) delete old Backup files. keep only last 10 2024-01-21 17:01:28.390 - info: zigbee.0 (1190) Starting Zigbee npm ... 2024-01-21 17:01:28.468 - debug: zigbee.0 (1190) Starting zigbee-herdsman... 2024-01-21 17:01:29.117 - error: zigbee.0 (1190) Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B0018E2F56A-if00'" 2024-01-21 17:01:29.118 - error: zigbee.0 (1190) Failed to start Zigbee 2024-01-21 17:01:29.118 - error: zigbee.0 (1190) Error herdsman start 2024-01-21 17:01:29.123 - info: zigbee.0 (1190) Installed Version: iobroker.zigbee@1.10.1 2024-01-21 17:01:29.643 - debug: zigbee.0 (1190) Backup /opt/iobroker/iobroker-data/zigbee_0/backup_2024_01_21-17_01_28.tar.gz success 2024-01-21 17:01:39.122 - info: zigbee.0 (1190) Try to reconnect. 1 attempts left 2024-01-21 17:01:39.123 - info: zigbee.0 (1190) Starting Zigbee npm ... 2024-01-21 17:01:39.128 - debug: zigbee.0 (1190) Starting zigbee-herdsman... 2024-01-21 17:01:39.139 - error: zigbee.0 (1190) Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B0018E2F56A-if00'" 2024-01-21 17:01:39.140 - error: zigbee.0 (1190) Failed to start Zigbee 2024-01-21 17:01:39.141 - error: zigbee.0 (1190) Error herdsman start 2024-01-21 17:01:39.149 - info: zigbee.0 (1190) Installed Version: iobroker.zigbee@1.10.1 2024-01-21 17:04:17.656 - error: zigbee.0 (1190) getGroups: caught error: TypeError: Cannot read properties of undefined (reading 'getGroups') 2024-01-21 17:04:18.043 - info: zigbee.0 (1190) List of port: [{"path":"/dev/ttyUSB0","manufacturer":"ITead","serialNumber":"8eb6f719a99ded11ad35dca5a7669f5d","pnpId":"usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_8eb6f719a99ded11ad35dca5a7669f5d-if00-port0","vendorId":"10c4","productId":"ea60"}] -
@tapdance-0 sagte in Ziggbe sendet nicht mehr an empfängt aber noch Daten:
Da:
das eintragen:
/dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_8eb6f719a99ded11ad35dca5a7669f5d-if00-port0 -
geht leider nicht da der Adapter nicht startet.
Bekomme immer folgende Meldung wenn ich darauf gehe.You need save and run adapter before pairing!
-
