[Gelöst] Zigbee Probleme (Parallelbetrieb 2er Sticks)
-
ich möchte meinen Zigbee Stick (USB) ablösen durch einen Adapter mit LAN Anschluss ("Zigbee 3.0 Coordinator Router Zigbee Gateway with LAN Port For Zigbee2mqtt")
Das Teil seit ca 2 Wochen paralel zum alten Zigbee Stick in Betrieb ohne Probleme und mit ein paar Test-Devices. Ich hab 2 Instanzen laufen, die wie folgt eingestellt sind:
Alter Stick
neuer Stick
Ich hab gestern angefangen diverse Devices auf den neuen Stick anzulernen, das hat auch ohne Probleme funktioniert, anschließend ein paar Skripts angepasst, alles supi
Heute war die zigbee.2 Instanz rot, im Log war u.a. die Fehlermeldung
zigbee.2 2024-03-16 15:45:13.477 error Starting zigbee-herdsman problem : "startup failed - configuration-adapter mismatch - see logs above for more information"Ich habe daraufhin in der Instanz "Start des Adapters mit inonsistenter Konfig erzwingen" ausgewählt und neu gestartet, im Protokoll war iob weiter am meckern aber im Moment funtioniert wieder alles
zigbee.2 2024-03-16 16:17:41.977 warn DeviceAvailability:Stopping to ping 0xa4c138442eb7c935 TS011F after 4 ping attempts zigbee.2 2024-03-16 16:17:26.992 warn DeviceAvailability:Stopping to ping 0x5c0272fffe96fa2a TRADFRI control outlet after 4 ping attempts zigbee.2 2024-03-16 16:17:11.855 warn DeviceAvailability:Stopping to ping 0x00124b0023528715 ZB-CL01 after 4 ping attempts zigbee.2 2024-03-16 16:17:11.044 warn DeviceAvailability:Stopping to ping 0x00124b00234c6ba9 ZB-CL01 after 4 ping attempts zigbee.2 2024-03-16 16:17:11.001 warn DeviceAvailability:Stopping to ping 0x00124b00235279d6 ZB-CL01 after 4 ping attempts zigbee.2 2024-03-16 15:46:07.586 warn DeviceAvailability:Failed to ping 0x5c0272fffe96fa2a TRADFRI control outlet zigbee.2 2024-03-16 15:46:01.646 warn DeviceAvailability:Failed to ping 0xa4c138442eb7c935 TS011F zigbee.2 2024-03-16 15:45:53.907 warn DeviceAvailability:Failed to ping 0x00124b00235279d6 ZB-CL01 zigbee.2 2024-03-16 15:45:53.895 warn DeviceAvailability:Failed to ping 0xa4c1388e4fb7d6d8 TS011F zigbee.2 2024-03-16 15:45:53.427 warn DeviceAvailability:Failed to ping 0x00124b0023528715 ZB-CL01 zigbee.2 2024-03-16 15:45:53.180 warn DeviceAvailability:Failed to ping 0x00124b00234c6ba9 ZB-CL01 zigbee.2 2024-03-16 15:45:37.114 warn DeviceConfigure: 0xbc33acfffe8663a9 TRADFRI remote control Failed to configure. When device works is all fine when not wake up the device and check again zigbee.2 2024-03-16 15:45:23.698 error Running despite adapter configuration mismatch as configured. Please update the adapter to compatible firmware and recreate your network as soon as possible. zigbee.2 2024-03-16 15:45:23.698 error Re-commissioning your network will require re-pairing of all devices! zigbee.2 2024-03-16 15:45:23.697 error If you wish to re-commission your network, please remove coordinator backup at /opt/iobroker/iobroker-data/zigbee_2/nvbackup.json. zigbee.2 2024-03-16 15:45:23.697 error Please update configuration to prevent further issues. zigbee.2 2024-03-16 15:45:23.696 error - Channel List: configured=11, adapter=11 zigbee.2 2024-03-16 15:45:23.695 error - Network Key: configured=01030507090b0d0f00020406080a0c0d, adapter=01030507090b0d0f00020406080a0c0d zigbee.2 2024-03-16 15:45:23.694 error - Extended PAN ID: configured=00124b0030b6836e, adapter=00124b0030b6836e zigbee.2 2024-03-16 15:45:23.694 error - PAN ID: configured=6759, adapter=6759 zigbee.2 2024-03-16 15:45:23.693 error Configuration is not consistent with adapter state/backup! zigbee.2 2024-03-16 15:45:17.148 warn Got terminate signal. Checking desired PID: 54395 vs own PID 54300 zigbee.2 2024-03-16 15:45:16.739 warn Got terminate signal. Checking desired PID: 0 vs own PID 54300Was mir aufgefallen ist: Kanal und "erweiterte PanID" der beiden Instanzen sind gleich, allerdings ist die PanID unterschiedlich. Aber der Transportschlüssel ist bei beiden Instanzen gleich. Kann das zu den Problemen führen? Was macht der Transportschlüssel?
Die Devices, die ich gestern abend angelernt habe, habe ich noch nicht aus der alten Instanz gelöscht. Kann das zu Problemen führen? Klar das die alte Instanz die nicht mehr findet, aber das dürfte doch keine Auswirkungen auf 2. Instanz haben (???)
iob master/slave System, Master ist ein proxmox container, alles up-to-date:
Skript v.2023-10-10 *** BASE SYSTEM *** Static hostname: iobroker Icon name: computer-container Chassis: container ☐ Virtualization: lxc Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.5.13-1-pve Architecture: x86-64 model name : Intel(R) Celeron(R) CPU J3455 @ 1.50GHz Docker : false Virtualization : lxc Kernel : x86_64 Userland : amd64 Systemuptime and Load: 17:03:32 up 1 day, 17:06, 2 users, load average: 1.36, 1.05, 0.90 CPU threads: 4 *** Time and Time Zones *** Local time: Sat 2024-03-16 17:03:32 CET Universal time: Sat 2024-03-16 16:03:32 UTC RTC time: n/a Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: inactive RTC in local TZ: no *** User and Groups *** andreas /home/andreas andreas sudo iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 12G 4.5G 2.9G 114K 5.4G 8.3G Swap: 4.3G 4.1K 4.3G Total: 17G 4.5G 7.2G 12288 M total memory 4333 M used memory 4238 M active memory 4987 M inactive memory 2798 M free memory 0 M buffer memory 5156 M swap cache 4096 M total swap 0 M used swap 4095 M free swap *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * run-rpc_pipefs.mount loaded failed failed RPC Pipe File System * sys-kernel-config.mount loaded failed failed Kernel Configuration File System LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 2 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/mapper/pve-vm--100--disk--1 ext4 147G 39G 101G 28% / none tmpfs 492K 4.0K 488K 1% /dev udev devtmpfs 7.7G 0 7.7G 0% /dev/tty tmpfs tmpfs 7.8G 0 7.8G 0% /dev/shm tmpfs tmpfs 3.1G 108K 3.1G 1% /run tmpfs tmpfs 5.0M 0 5.0M 0% /run/lock Messages concerning ext4 filesystem in dmesg: dmesg: read kernel buffer failed: Operation not permitted Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/mapper/pve-vm--100--disk--1 ext4 rw,relatime,stripe=16 Files in neuralgic directories: /var: 2.0G /var/ 1.3G /var/cache/apt/archives 1.3G /var/cache/apt 1.3G /var/cache 466M /var/log Hint: You are currently not seeing messages from other users and the system. Users in groups 'adm', 'systemd-journal' can see all messages. Pass -q to turn off this notice. Archived and active journals take up 92.2M in the file system. /opt/iobroker/backups: 2.4G /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 15G /opt/iobroker/iobroker-data/history 15G /opt/iobroker/iobroker-data/ 551M /opt/iobroker/iobroker-data/files 171M /opt/iobroker/iobroker-data/backup-objects 92M /opt/iobroker/iobroker-data/files/vis-2-beta The five largest files in iobroker-data are: 33M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js.map 30M /opt/iobroker/iobroker-data/objects.jsonl 24M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.135279a0.js.map 24M /opt/iobroker/iobroker-data/files/echarts/static/js/main.2b7495c2.js.map 24M /opt/iobroker/iobroker-data/files/echarts.admin/chart/static/js/main.2b7495c2.js.map USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': find: '/dev/serial/by-id/': No such file or directory *** NodeJS-Installation *** /usr/bin/nodejs v18.19.1 /usr/bin/node v18.19.1 /usr/bin/npm 10.2.4 /usr/bin/npx 10.2.4 /usr/bin/corepack 0.22.0 nodejs: Installed: 18.19.1-1nodesource1 Candidate: 18.19.1-1nodesource1 Version table: *** 18.19.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 100 /var/lib/dpkg/status 18.19.0+dfsg-6~deb12u1 500 500 http://security.debian.org/debian-security bookworm-security/main amd64 Packages 18.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.16.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.14.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.14.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.13.0+dfsg1-1 500 500 http://deb.debian.org/debian bookworm/main amd64 Packages 18.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.9.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: redis Core adapters versions js-controller: 5.0.19 admin: 6.15.2 javascript: 7.9.0 Adapters from github: 0 Adapter State + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : iobroker - enabled system.adapter.alias-manager.0 : alias-manager : iobroker - enabled + system.adapter.awtrix-light.0 : awtrix-light : iobroker - enabled + system.adapter.awtrix-light.1 : awtrix-light : iobroker - enabled + system.adapter.backitup.0 : backitup : iobroker - enabled + system.adapter.backitup.1 : backitup : iobroker - enabled + system.adapter.bmw.0 : bmw : iobroker - enabled system.adapter.daswetter.0 : daswetter : iobroker - enabled system.adapter.device-watcher.0 : device-watcher : iobroker - disabled system.adapter.discovery.0 : discovery : iobroker - disabled + system.adapter.echarts.0 : echarts : iobroker - enabled + system.adapter.email.0 : email : iobroker - enabled system.adapter.energiefluss.0 : energiefluss : iobroker - disabled system.adapter.feiertage.0 : feiertage : iobroker - enabled system.adapter.flot.0 : flot : iobroker - enabled + system.adapter.fullcalendar.0 : fullcalendar : iobroker - enabled + system.adapter.gotify.0 : gotify : iobroker - enabled + system.adapter.history.0 : history : iobroker - enabled + system.adapter.hm-rega.0 : hm-rega : iobroker - enabled + system.adapter.hm-rpc.0 : hm-rpc : iobroker - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : iobroker - enabled, port: 0 + system.adapter.hm-rpc.2 : hm-rpc : iobroker - enabled, port: 0 + system.adapter.hm-rpc.3 : hm-rpc : iobroker - enabled, port: 0 system.adapter.ical.0 : ical : iobroker - enabled system.adapter.ical.1 : ical : iobroker - enabled system.adapter.ical.2 : ical : iobroker - enabled system.adapter.ical.3 : ical : iobroker - enabled system.adapter.ical.6 : ical : iobroker - enabled + system.adapter.iot.0 : iot : iobroker - enabled + system.adapter.javascript.0 : javascript : iobroker - enabled + system.adapter.klf200.0 : klf200 : iobroker - enabled + system.adapter.lgtv.0 : lgtv : iobroker - enabled + system.adapter.lgtv.1 : lgtv : iobroker - enabled + system.adapter.milight-smart-light.0 : milight-smart-light : iobroker - enabled + system.adapter.mqtt.0 : mqtt : iobroker - enabled, port: 1884, bind: 0.0.0.0 + system.adapter.nina.0 : nina : iobroker - enabled + system.adapter.ping.0 : ping : iobroker - enabled + system.adapter.plenticore.0 : plenticore : iobroker - enabled, port: 80 + system.adapter.proxmox.0 : proxmox : iobroker - enabled, port: 8006 + system.adapter.proxmox.1 : proxmox : iobroker - enabled, port: 8006 + system.adapter.proxmox.2 : proxmox : iobroker - enabled, port: 8006 + system.adapter.rpi2.0 : rpi2 : iostrom - enabled + system.adapter.rssfeed.0 : rssfeed : iobroker - enabled system.adapter.schoolfree.0 : schoolfree : iobroker - enabled + system.adapter.shelly.0 : shelly : iobroker - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shuttercontrol.0 : shuttercontrol : iobroker - enabled + system.adapter.smartmeter.0 : smartmeter : iostrom - enabled + system.adapter.snmp.0 : snmp : iobroker - enabled + system.adapter.sonoff.0 : sonoff : iobroker - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.tankerkoenig.0 : tankerkoenig : iobroker - enabled + system.adapter.telegram.0 : telegram : iobroker - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.tr-064.0 : tr-064 : iobroker - enabled + system.adapter.tr-064.2 : tr-064 : iobroker - enabled + system.adapter.trashschedule.0 : trashschedule : iobroker - enabled + system.adapter.unifi.0 : unifi : iobroker - enabled + system.adapter.vis-2-beta.0 : vis-2-beta : iobroker - enabled system.adapter.vis-2-widgets-gauges.0 : vis-2-widgets-gauges : iobroker - enabled system.adapter.vis-bars.0 : vis-bars : iobroker - disabled system.adapter.vis-canvas-gauges.0 : vis-canvas-gauges : iobroker - disabled system.adapter.vis-colorpicker.0 : vis-colorpicker : iobroker - disabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : iobroker - disabled system.adapter.vis-icontwo.0 : vis-icontwo : iobroker - enabled + system.adapter.vis-inventwo.0 : vis-inventwo : iobroker - enabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : iobroker - enabled system.adapter.vis-justgage.0 : vis-justgage : iobroker - disabled system.adapter.vis-map.0 : vis-map : iobroker - disabled system.adapter.vis-timeandweather.0 : vis-timeandweather : iobroker - enabled system.adapter.vis.0 : vis : iobroker - enabled + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.web.1 : web : iobroker - enabled, port: 20002, bind: 0.0.0.0, run as: admin + system.adapter.wifilight.0 : wifilight : iobroker - enabled + system.adapter.wolf.0 : wolf : iobroker - enabled, port: 12004, bind: 0.0.0.0 + system.adapter.zigbee.0 : zigbee : iobroker - enabled, port: /dev/ttyUSB0 + system.adapter.zigbee.2 : zigbee : iobroker - enabled, port: tcp://192.168.1.224:1053 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.hm-rpc.0 : hm-rpc : iobroker - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : iobroker - enabled, port: 0 + system.adapter.hm-rpc.2 : hm-rpc : iobroker - enabled, port: 0 + system.adapter.hm-rpc.3 : hm-rpc : iobroker - enabled, port: 0 + system.adapter.mqtt.0 : mqtt : iobroker - enabled, port: 1884, bind: 0.0.0.0 + system.adapter.plenticore.0 : plenticore : iobroker - enabled, port: 80 + system.adapter.proxmox.0 : proxmox : iobroker - enabled, port: 8006 + system.adapter.proxmox.1 : proxmox : iobroker - enabled, port: 8006 + system.adapter.proxmox.2 : proxmox : iobroker - enabled, port: 8006 + system.adapter.shelly.0 : shelly : iobroker - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : iobroker - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.telegram.0 : telegram : iobroker - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.web.1 : web : iobroker - enabled, port: 20002, bind: 0.0.0.0, run as: admin + system.adapter.wolf.0 : wolf : iobroker - enabled, port: 12004, bind: 0.0.0.0 + system.adapter.zigbee.0 : zigbee : iobroker - enabled, port: /dev/ttyUSB0 + system.adapter.zigbee.2 : zigbee : iobroker - enabled, port: tcp://192.168.1.224:1053 ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): beta Installed ioBroker-Instances Used repository: beta Adapter "admin" : 6.15.2 , installed 6.15.2 Adapter "alexa2" : 3.26.4 , installed 3.26.4 Adapter "alias-manager": 1.2.6 , installed 1.2.6 Adapter "awtrix-light" : 0.16.0 , installed 0.16.0 Adapter "backitup" : 2.11.0 , installed 2.11.0 Adapter "bmw" : 2.8.0 , installed 2.8.0 Adapter "daswetter" : 3.1.13 , installed 3.1.13 Adapter "device-watcher": 2.10.5 , installed 2.10.5 Adapter "discovery" : 4.4.0 , installed 4.4.0 Adapter "echarts" : 1.7.2 , installed 1.7.2 Adapter "email" : 1.2.2 , installed 1.2.2 Adapter "energiefluss" : 3.6.0 , installed 3.6.0 Adapter "feiertage" : 1.1.4 , installed 1.1.4 Adapter "flot" : 1.12.0 , installed 1.12.0 Adapter "fullcalendar" : 2.3.4 , installed 2.3.4 Adapter "gotify" : 0.2.0 , installed 0.2.0 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "hm-rega" : 4.0.0 , installed 4.0.0 Adapter "hm-rpc" : 1.16.1 , installed 1.16.1 Adapter "ical" : 1.14.3 , installed 1.14.3 Adapter "iot" : 2.0.11 , installed 2.0.11 Adapter "javascript" : 7.9.0 , installed 7.9.0 Controller "js-controller": 5.0.19 , installed 5.0.19 Adapter "klf200" : 1.2.0 , installed 1.2.0 Adapter "lgtv" : 2.1.2 , installed 2.1.2 Adapter "milight-smart-light": 1.2.2, installed 1.2.2 Adapter "mqtt" : 5.2.0 , installed 5.2.0 Adapter "nina" : 0.0.26 , installed 0.0.26 Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "plenticore" : 2.3.1 , installed 2.3.1 Adapter "proxmox" : 2.2.3 , installed 2.2.3 Adapter "rssfeed" : 2.8.1 , installed 2.8.1 Adapter "schoolfree" : 1.1.4 , installed 1.1.4 Adapter "shelly" : 6.9.0 , installed 6.9.0 Adapter "shuttercontrol": 1.7.0 , installed 1.7.0 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "snmp" : 3.1.0 , installed 3.1.0 Adapter "socketio" : 6.6.1 , installed 6.6.1 Adapter "sonoff" : 3.0.3 , installed 3.0.3 Adapter "tankerkoenig" : 3.3.7 , installed 3.3.7 Adapter "telegram" : 3.1.0 , installed 3.1.0 Adapter "tr-064" : 4.2.18 , installed 4.2.18 Adapter "trashschedule": 3.2.0 , installed 3.2.0 Adapter "unifi" : 0.6.7 , installed 0.6.7 Adapter "vis" : 1.5.4 , installed 1.5.4 Adapter "vis-2-widgets-gauges": 1.0.3, installed 1.0.3 Adapter "vis-bars" : 0.1.4 , installed 0.1.4 Adapter "vis-canvas-gauges": 1.0.1, installed 1.0.1 Adapter "vis-colorpicker": 2.0.3 , installed 2.0.3 Adapter "vis-hqwidgets": 1.5.1 , installed 1.5.1 Adapter "vis-icontwo" : 1.5.0 , installed 1.5.0 Adapter "vis-inventwo" : 3.3.4 , installed 3.3.4 Adapter "vis-jqui-mfd" : 1.1.1 , installed 1.1.1 Adapter "vis-justgage" : 2.1.7 , installed 2.1.7 Adapter "vis-map" : 1.1.0 , installed 1.1.0 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "web" : 6.2.5 , installed 6.2.5 Adapter "wifilight" : 1.1.4 , installed 1.1.4 Adapter "wolf" : 1.7.0 , installed 1.7.0 Adapter "ws" : 2.5.11 , installed 2.5.11 Adapter "zigbee" : 1.10.2 , installed 1.10.2 Objects and States Please stand by - This may take a while Objects: 40487 States: 33024 *** OS-Repositories and Updates *** Hit:1 http://security.debian.org/debian-security bookworm-security InRelease Hit:2 http://deb.debian.org/debian bookworm InRelease Hit:3 http://deb.debian.org/debian bookworm-updates InRelease Hit:4 https://deb.nodesource.com/node_18.x nodistro InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:6380 0.0.0.0:* LISTEN 109 35653271 122/redis-server 0. tcp 0 0 0.0.0.0:6379 0.0.0.0:* LISTEN 109 35652446 118/redis-server 0. tcp 0 0 192.168.1.23:9292 0.0.0.0:* LISTEN 1001 35655346 502/io.hm-rpc.3 tcp 0 0 192.168.1.23:2001 0.0.0.0:* LISTEN 1001 35655197 453/io.hm-rpc.0 tcp 0 0 192.168.1.23:2010 0.0.0.0:* LISTEN 1001 35656307 491/io.hm-rpc.2 tcp 0 0 192.168.1.23:8701 0.0.0.0:* LISTEN 1001 35656159 476/io.hm-rpc.1 tcp 0 0 0.0.0.0:12004 0.0.0.0:* LISTEN 1001 35661199 792/io.wolf.0 tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 35653673 168/sshd: /usr/sbin tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 0 35651375 1/init tcp 0 0 0.0.0.0:9001 0.0.0.0:* LISTEN 1001 35654748 198/iobroker.js-con tcp 0 0 0.0.0.0:1884 0.0.0.0:* LISTEN 1001 35657394 611/io.mqtt.0 tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 35660863 708/io.sonoff.0 tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN 0 35652507 299/master tcp6 0 0 ::1:25 :::* LISTEN 0 35652508 299/master tcp6 0 0 :::8081 :::* LISTEN 1001 35653434 314/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1001 35669141 1261/io.web.0 tcp6 0 0 :::4400 :::* LISTEN 1001 35665283 1036/io.milight-sma tcp6 0 0 :::20002 :::* LISTEN 1001 35668240 1274/io.web.1 tcp6 0 0 ::1:6379 :::* LISTEN 109 35652447 118/redis-server 0. tcp6 0 0 ::1:6380 :::* LISTEN 109 35653272 122/redis-server 0. tcp6 0 0 :::22 :::* LISTEN 0 35651523 168/sshd: /usr/sbin tcp6 0 0 :::111 :::* LISTEN 0 35651377 1/init udp 0 0 0.0.0.0:49683 0.0.0.0:* 1001 35664682 1165/io.snmp.0 udp 0 0 0.0.0.0:52820 0.0.0.0:* 1001 35662351 1036/io.milight-sma udp 0 0 0.0.0.0:53938 0.0.0.0:* 1001 35664683 1165/io.snmp.0 udp 0 0 192.168.1.23:5353 0.0.0.0:* 1001 35659094 731/io.tr-064.0 udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 35659809 674/io.shelly.0 udp 0 0 0.0.0.0:111 0.0.0.0:* 0 35651376 1/init udp6 0 0 :::111 :::* 0 35651378 1/init *** Log File - Last 25 Lines *** 2024-03-16 16:53:27.225 - info: admin.0 (314) <== Disconnect system.user.admin from ::ffff:192.168.1.3 2024-03-16 16:53:35.020 - info: admin.0 (314) ==> Connected system.user.admin from ::ffff:192.168.1.3 2024-03-16 16:53:35.399 - info: zigbee.0 (807) List of port: [{"path":"/dev/ttyUSB0"},{"path":"/dev/ttyS4"},{"path":"/dev/ttyS0"},{"path":"/dev/ttyS1"},{"path":"/dev/ttyS10"},{"path":"/dev/ttyS11"},{"path":"/dev/ttyS12"},{"path":"/dev/ttyS13"},{"path":"/dev/ttyS14"},{"path":"/dev/ttyS15"},{"path":"/dev/ttyS16"},{"path":"/dev/ttyS17"},{"path":"/dev/ttyS18"},{"path":"/dev/ttyS19"},{"path":"/dev/ttyS2"},{"path":"/dev/ttyS20"},{"path":"/dev/ttyS21"},{"path":"/dev/ttyS22"},{"path":"/dev/ttyS23"},{"path":"/dev/ttyS24"},{"path":"/dev/ttyS25"},{"path":"/dev/ttyS26"},{"path":"/dev/ttyS27"},{"path":"/dev/ttyS28"},{"path":"/dev/ttyS29"},{"path":"/dev/ttyS3"},{"path":"/dev/ttyS30"},{"path":"/dev/ttyS31"},{"path":"/dev/ttyS5"},{"path":"/dev/ttyS6"},{"path":"/dev/ttyS7"},{"path":"/dev/ttyS8"},{"path":"/dev/ttyS9"}] 2024-03-16 16:53:48.413 - info: admin.0 (314) <== Disconnect system.user.admin from ::ffff:192.168.1.3 2024-03-16 16:53:56.215 - info: admin.0 (314) ==> Connected system.user.admin from ::ffff:192.168.1.3 2024-03-16 16:53:56.548 - info: zigbee.2 (54395) List of port: [{"path":"/dev/ttyUSB0"},{"path":"/dev/ttyS4"},{"path":"/dev/ttyS0"},{"path":"/dev/ttyS1"},{"path":"/dev/ttyS10"},{"path":"/dev/ttyS11"},{"path":"/dev/ttyS12"},{"path":"/dev/ttyS13"},{"path":"/dev/ttyS14"},{"path":"/dev/ttyS15"},{"path":"/dev/ttyS16"},{"path":"/dev/ttyS17"},{"path":"/dev/ttyS18"},{"path":"/dev/ttyS19"},{"path":"/dev/ttyS2"},{"path":"/dev/ttyS20"},{"path":"/dev/ttyS21"},{"path":"/dev/ttyS22"},{"path":"/dev/ttyS23"},{"path":"/dev/ttyS24"},{"path":"/dev/ttyS25"},{"path":"/dev/ttyS26"},{"path":"/dev/ttyS27"},{"path":"/dev/ttyS28"},{"path":"/dev/ttyS29"},{"path":"/dev/ttyS3"},{"path":"/dev/ttyS30"},{"path":"/dev/ttyS31"},{"path":"/dev/ttyS5"},{"path":"/dev/ttyS6"},{"path":"/dev/ttyS7"},{"path":"/dev/ttyS8"},{"path":"/dev/ttyS9"}] 2024-03-16 16:55:08.719 - info: admin.0 (314) <== Disconnect system.user.admin from ::ffff:192.168.1.3 2024-03-16 16:55:54.921 - warn: bmw.0 (866) Out of call volume quota. Quota will be replenished in 00:04:06. 2024-03-16 16:55:56.515 - warn: tr-064.2 (743) forEachConfiguredDevice: in GetSpecificHostEntry 0(7590Glasfaser/2C:3A:FD:8D:EC:A1):Error: sendSOAPActionRequest Error action=GetSpecificHostEntry serviceType=urn:dslforum-org:service:Hosts:1: - {"code":""} 2024-03-16 16:56:31.901 - info: admin.0 (314) ==> Connected system.user.admin from ::ffff:192.168.1.3 2024-03-16 16:56:32.246 - info: zigbee.2 (54395) List of port: [{"path":"/dev/ttyUSB0"},{"path":"/dev/ttyS4"},{"path":"/dev/ttyS0"},{"path":"/dev/ttyS1"},{"path":"/dev/ttyS10"},{"path":"/dev/ttyS11"},{"path":"/dev/ttyS12"},{"path":"/dev/ttyS13"},{"path":"/dev/ttyS14"},{"path":"/dev/ttyS15"},{"path":"/dev/ttyS16"},{"path":"/dev/ttyS17"},{"path":"/dev/ttyS18"},{"path":"/dev/ttyS19"},{"path":"/dev/ttyS2"},{"path":"/dev/ttyS20"},{"path":"/dev/ttyS21"},{"path":"/dev/ttyS22"},{"path":"/dev/ttyS23"},{"path":"/dev/ttyS24"},{"path":"/dev/ttyS25"},{"path":"/dev/ttyS26"},{"path":"/dev/ttyS27"},{"path":"/dev/ttyS28"},{"path":"/dev/ttyS29"},{"path":"/dev/ttyS3"},{"path":"/dev/ttyS30"},{"path":"/dev/ttyS31"},{"path":"/dev/ttyS5"},{"path":"/dev/ttyS6"},{"path":"/dev/ttyS7"},{"path":"/dev/ttyS8"},{"path":"/dev/ttyS9"}] 2024-03-16 16:58:11.683 - warn: tr-064.2 (743) forEachConfiguredDevice: in GetSpecificHostEntry 1(EdgeRouter-10X/D0:21:F9:6B:EA:9A):Error: sendSOAPActionRequest Error action=GetSpecificHostEntry serviceType=urn:dslforum-org:service:Hosts:1: - {"code":""} 2024-03-16 16:59:53.480 - info: admin.0 (314) ==> Connected system.user.admin from ::ffff:192.168.1.3 2024-03-16 16:59:53.916 - info: zigbee.0 (807) List of port: [{"path":"/dev/ttyUSB0"},{"path":"/dev/ttyS4"},{"path":"/dev/ttyS0"},{"path":"/dev/ttyS1"},{"path":"/dev/ttyS10"},{"path":"/dev/ttyS11"},{"path":"/dev/ttyS12"},{"path":"/dev/ttyS13"},{"path":"/dev/ttyS14"},{"path":"/dev/ttyS15"},{"path":"/dev/ttyS16"},{"path":"/dev/ttyS17"},{"path":"/dev/ttyS18"},{"path":"/dev/ttyS19"},{"path":"/dev/ttyS2"},{"path":"/dev/ttyS20"},{"path":"/dev/ttyS21"},{"path":"/dev/ttyS22"},{"path":"/dev/ttyS23"},{"path":"/dev/ttyS24"},{"path":"/dev/ttyS25"},{"path":"/dev/ttyS26"},{"path":"/dev/ttyS27"},{"path":"/dev/ttyS28"},{"path":"/dev/ttyS29"},{"path":"/dev/ttyS3"},{"path":"/dev/ttyS30"},{"path":"/dev/ttyS31"},{"path":"/dev/ttyS5"},{"path":"/dev/ttyS6"},{"path":"/dev/ttyS7"},{"path":"/dev/ttyS8"},{"path":"/dev/ttyS9"}] 2024-03-16 17:00:00.003 - info: javascript.0 (367) script.js.Devicemanagement.HM_Status: HM Check läuft 2024-03-16 17:00:00.044 - info: host.iobroker instance system.adapter.daswetter.0 started with pid 55875 2024-03-16 17:00:02.371 - info: daswetter.0 (55875) starting. Version 3.1.13 in /opt/iobroker/node_modules/iobroker.daswetter, node: v18.19.1, js-controller: 5.0.19 2024-03-16 17:00:05.128 - warn: trashschedule.0 (1195) no events matches type "Gartenabfall" with match "Garten" 2024-03-16 17:00:20.577 - info: daswetter.0 (55875) still wrong data structure from server received! repaired... 2024-03-16 17:00:26.425 - info: daswetter.0 (55875) Terminated (ADAPTER_REQUESTED_TERMINATION): All data handled, adapter stopped until next scheduled moment 2024-03-16 17:00:26.939 - info: daswetter.0 (55875) cleaned everything up... 2024-03-16 17:00:26.971 - info: host.iobroker instance system.adapter.daswetter.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2024-03-16 17:00:53.475 - warn: tr-064.2 (743) forEachConfiguredDevice: in GetSpecificHostEntry 0(7590Glasfaser/2C:3A:FD:8D:EC:A1):Error: sendSOAPActionRequest Error action=GetSpecificHostEntry serviceType=urn:dslforum-org:service:Hosts:1: - {"code":""} 2024-03-16 17:01:00.003 - info: javascript.0 (367) script.js.Heizung.Heizungssteuerung1: Heizungsscript 2024-03-16 17:03:08.647 - warn: tr-064.2 (743) forEachConfiguredDevice: in GetSpecificHostEntry 1(EdgeRouter-10X/D0:21:F9:6B:EA:9A):Error: sendSOAPActionRequest Error action=GetSpecificHostEntry serviceType=urn:dslforum-org:service:Hosts:1: - {"code":""} -
@amg_666 sagte in Zigbee Probleme (Parallelbetrieb 2er Sticks):
Kann das zu den Problemen führen?
Ja. Überleg dir für die 'erweiterte PanID' jeweils unterschiedliche Hex-Werte.
-
@thomas-braun sagte in Zigbee Probleme (Parallelbetrieb 2er Sticks):
e 'erweiterte PanID' jewe
das bedeutet dan aber neu anlernen, oder?
-
@amg_666 sagte in Zigbee Probleme (Parallelbetrieb 2er Sticks):
das bedeutet dan aber neu anlernen, oder?
Musst du doch eh bei dem neuen Gerät.
-
@thomas-braun ja, aber die Aktion gestern abend waren schon einige Geräte
Naja ist wenigstens Beschäftigung fürs Wochenende gesichert -
Ich hab die erweiterte PanID geändert, danach hat er immer noch rumgemeckert, dass es eine Inkonsistenz gibt (weil wohl im Backup jetzt andere PanID steht als im Adapter.
Also Instanz gestoppt, Backupfile gelöscht (/opt/iobroker/iobroker-data/<zigbee-instanz>/nvbackup.json) und dann neu gestartet/neu angelernt.
Rennt wieder -
@amg_666 sagte in [Gelöst] Zigbee Probleme (Parallelbetrieb 2er Sticks):
Ich hab die erweiterte PanID geändert, danach hat er immer noch rumgemeckert, dass es eine Inkonsistenz gibt (weil wohl im Backup jetzt andere PanID steht als im Adapter.
Also Instanz gestoppt, Backupfile gelöscht (/opt/iobroker/iobroker-data/<zigbee-instanz>/nvbackup.json) und dann neu gestartet/neu angelernt.
Rennt wiederDas ist das erwartete Verhalten - als Schutz gegen „versehentliches“ ändern der pan-ID. Hoffentlich bleibt es jetzt stabil
A.
