Installation von iobroker Abbruch bei 3/4 mit Meldung ab..

wikato

Hallo,
wollte iobroker auf meinem Raspberry installieren...leider sehe ich Fehler unter Punkt 3/4. Wobei am Schluss der Installation steht iobroker was installed successfully.
Mittels Browser komme ich nicht auf den iobroker...

Hier die Fehlermeldung...für support bin ich dankbar.

==========================================================================
    Installing ioBroker (3/4)
==========================================================================

npm error code 24
npm error path /opt/iobroker/node_modules/iobroker.js-controller
npm error command failed
npm error command sh -c node iobroker.js setup first
npm error Could not connect to states database at 127.0.0.1:9000 (invalid protocol). Please make sure the configured IP and port points to a host running JS-Controller >= 2.0. and that the port is not occupied by other software!
npm error  Could not connect to states database at 127.0.0.1:9000 (invalid protocol). Please make sure the configured IP and port points to a host running JS-Controller >= 2.0. and that the port is not occupied by other software!
npm error Server Cannot start inMem-objects on port 9001: Failed to lock DB file "/opt/iobroker/iobroker-data/objects.jsonl"!
npm error A complete log of this run can be found in: /home/admin/.npm/_logs/2024-05-17T07_42_17_690Z-debug-0.log

==========================================================================
    Finalizing installation (4/4)
==========================================================================

Enabling autostart...
Autostart enabled!
Fixing directory permissions...

==========================================================================

    ioBroker was installed successfully
    Open http://192.168.100.134:8081 in a browser and start configuring!

==========================================================================


You need to re-login before doing anything else on the console!

MOD-EDIT: Code in code-tags gesetzt!

wikato

hallo,
ich kriege einen Fehlermeldungen bei der Installation von iobroker bei Punkt 3/4...am Schluss steht aber iobroker installed successfully...leider komme ich aber mittels
browser anschliessend nicht auf den iobroker.

Bin dankbar für support dazu

Fehlermeldung:

==========================================================================
    Installing ioBroker (3/4)
==========================================================================

npm error code 24
npm error path /opt/iobroker/node_modules/iobroker.js-controller
npm error command failed
npm error command sh -c node iobroker.js setup first
npm error Could not connect to states database at 127.0.0.1:9000 (invalid protocol). Please make sure the configured IP and port points to a host running JS-Controller >= 2.0. and that the port is not occupied by other software!
npm error  Could not connect to states database at 127.0.0.1:9000 (invalid protocol). Please make sure the configured IP and port points to a host running JS-Controller >= 2.0. and that the port is not occupied by other software!
npm error Server Cannot start inMem-objects on port 9001: Failed to lock DB file "/opt/iobroker/iobroker-data/objects.jsonl"!
npm error A complete log of this run can be found in: /home/admin/.npm/_logs/2024-05-17T07_42_17_690Z-debug-0.log

==========================================================================
    Finalizing installation (4/4)
==========================================================================

Enabling autostart...
Autostart enabled!
Fixing directory permissions...

==========================================================================

    ioBroker was installed successfully
    Open http://192.168.100.134:8081 in a browser and start configuring!

==========================================================================


You need to re-login before doing anything else on the console!

Homoran

@wikato Bitte mehr Informationen zu deinem System!
Hardware und Programme.

@wikato sagte in iobroker installation fehler bei 3/4 mit meldung....:

Could not connect to states database at 127.0.0.1:9000

läuft da noch was?

@wikato sagte in iobroker installation fehler bei 3/4 mit meldung....:

A complete log of this run can be found in: /home/admin/.npm/_logs/2024-05-17T07_42_17_690Z-debug-0.log

Was steht da drin.

arteck

@wikato nach welcher Installationsanleitung ?

wikato

@arteck gemäss der Anleitung auf iobroker für Raspberry ¨
https://www.iobroker.net/#de/documentation/install/linux.md

Thomas Braun

@wikato

Gib mal die Langfassung von

iob diag

zum besten.

wikato

auf einem Rapberry Pi5.

Am Ende der Ausgabe sehe ich, dass die Installation erfolgreich ist, sehe aber weiter oben Error Meldungen.

Ich wollte danach mittels Webbrowser auf den iobroker zugreifen, was nicht funktioniert.
<IP-IOBroker>:8081

wikato

@thomas-braun

======== Start marking the full check here =========

Skript v.2024-04-21

*** BASE SYSTEM ***
 Static hostname: raspberrypi
       Icon name: computer
Operating System: Debian GNU/Linux 12 (bookworm)
          Kernel: Linux 6.6.28+rpt-rpi-2712
    Architecture: arm64

Model		: Raspberry Pi 5 Model B Rev 1.0
Docker          : false
Virtualization  : none
Kernel          : aarch64
Userland        : 64 bit

Systemuptime and Load:
 14:55:59 up  1:04,  3 users,  load average: 0.08, 0.06, 0.05
CPU threads: 4


*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

*** Time and Time Zones ***
               Local time: Fri 2024-05-17 14:55:59 CEST
           Universal time: Fri 2024-05-17 12:55:59 UTC
                 RTC time: Fri 2024-05-17 12:55:59
                Time zone: Europe/Zurich (CEST, +0200)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** Users and Groups ***
User that called 'iob diag':
admin
HOME=/home/admin
GROUPS=admin adm dialout cdrom sudo audio video plugdev games users input render netdev lpadmin gpio i2c spi iobroker

User that is running 'js-controller':
js-controller is not running

*** Display-Server-Setup ***
Display-Server: true
Desktop: 	LXDE-pi-wayfire
Terminal: 	wayland
Boot Target: 	graphical.target

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            8.4G        1.3G        5.8G        227M        1.6G        7.1G
Swap:           104M          0B        104M
Total:          8.5G        1.3G        5.9G

Active iob-Instances: 	0

         8048 M total memory
         1241 M used memory
         1575 M active memory
          534 M inactive memory
         5569 M free memory
           67 M buffer memory
         1479 M swap cache
           99 M total swap
            0 M used swap
           99 M free swap

*** top - Table Of Processes  ***
top - 14:55:59 up  1:04,  3 users,  load average: 0.08, 0.06, 0.05
Tasks: 243 total,   1 running, 242 sleeping,   0 stopped,   0 zombie
%Cpu(s): 20.0 us, 30.0 sy,  0.0 ni, 40.0 id, 10.0 wa,  0.0 hi,  0.0 si,  0.0 st 
MiB Mem :   8048.5 total,   5569.7 free,   1241.1 used,   1546.8 buff/cache     
MiB Swap:    100.0 total,    100.0 free,      0.0 used.   6807.4 avail Mem 

*** FAILED SERVICES ***

  UNIT LOAD ACTIVE SUB DESCRIPTION
0 loaded units listed.

*** FILESYSTEM ***
Filesystem                  Type      Size  Used Avail Use% Mounted on
udev                        devtmpfs  3.8G     0  3.8G   0% /dev
tmpfs                       tmpfs     805M  6.2M  799M   1% /run
/dev/mmcblk0p2              ext4       29G  7.0G   21G  26% /
tmpfs                       tmpfs     4.0G   14M  4.0G   1% /dev/shm
tmpfs                       tmpfs     5.0M   48K  5.0M   1% /run/lock
/dev/mmcblk0p1              vfat      510M   75M  436M  15% /boot/firmware
//192.168.100.50/Multimedia cifs      1.8T  428G  1.4T  24% /home/admin/Multimedia
tmpfs                       tmpfs     805M  176K  805M   1% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Fri May 17 13:51:33 2024] Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1  smsc95xx.macaddr=2C:CF:67:1E:CE:64 vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000  console=ttyAMA10,115200 console=tty1 root=PARTUUID=7551c7d7-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles cfg80211.ieee80211_regdom=CH
[Fri May 17 13:51:34 2024] EXT4-fs (mmcblk0p2): mounted filesystem cb6f0e18-5add-4177-ab98-e9f0235e06b3 ro with ordered data mode. Quota mode: none.
[Fri May 17 13:51:35 2024] EXT4-fs (mmcblk0p2): re-mounted cb6f0e18-5add-4177-ab98-e9f0235e06b3 r/w. Quota mode: none.

Show mounted filesystems:
TARGET                                                  SOURCE                      FSTYPE          OPTIONS
/                                                       /dev/mmcblk0p2              ext4            rw,noatime
|-/sys                                                  sysfs                       sysfs           rw,nosuid,nodev,noexec,relatime
| |-/sys/kernel/security                                securityfs                  securityfs      rw,nosuid,nodev,noexec,relatime
| |-/sys/fs/cgroup                                      cgroup2                     cgroup2         rw,nosuid,nodev,noexec,relatime,nsdelegate,memory_recursiveprot
| |-/sys/fs/pstore                                      pstore                      pstore          rw,nosuid,nodev,noexec,relatime
| |-/sys/fs/bpf                                         bpf                         bpf             rw,nosuid,nodev,noexec,relatime,mode=700
| |-/sys/kernel/tracing                                 tracefs                     tracefs         rw,nosuid,nodev,noexec,relatime
| |-/sys/kernel/debug                                   debugfs                     debugfs         rw,nosuid,nodev,noexec,relatime
| |-/sys/kernel/config                                  configfs                    configfs        rw,nosuid,nodev,noexec,relatime
| `-/sys/fs/fuse/connections                            fusectl                     fusectl         rw,nosuid,nodev,noexec,relatime
|-/proc                                                 proc                        proc            rw,relatime
| |-/proc/sys/fs/binfmt_misc                            systemd-1                   autofs          rw,relatime,fd=29,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=5307
| | `-/proc/sys/fs/binfmt_misc                          binfmt_misc                 binfmt_misc     rw,nosuid,nodev,noexec,relatime
| `-/proc/fs/nfsd                                       nfsd                        nfsd            rw,relatime
|-/dev                                                  udev                        devtmpfs        rw,nosuid,relatime,size=3945856k,nr_inodes=246616,mode=755
| |-/dev/pts                                            devpts                      devpts          rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000
| |-/dev/shm                                            tmpfs                       tmpfs           rw,nosuid,nodev
| `-/dev/mqueue                                         mqueue                      mqueue          rw,nosuid,nodev,noexec,relatime
|-/run                                                  tmpfs                       tmpfs           rw,nosuid,nodev,noexec,relatime,size=824176k,mode=755
| |-/run/lock                                           tmpfs                       tmpfs           rw,nosuid,nodev,noexec,relatime,size=5120k
| |-/run/credentials/systemd-sysusers.service           ramfs                       ramfs           ro,nosuid,nodev,noexec,relatime,mode=700
| |-/run/credentials/systemd-sysctl.service             ramfs                       ramfs           ro,nosuid,nodev,noexec,relatime,mode=700
| |-/run/credentials/systemd-tmpfiles-setup-dev.service ramfs                       ramfs           ro,nosuid,nodev,noexec,relatime,mode=700
| |-/run/rpc_pipefs                                     sunrpc                      rpc_pipefs      rw,relatime
| |-/run/credentials/systemd-tmpfiles-setup.service     ramfs                       ramfs           ro,nosuid,nodev,noexec,relatime,mode=700
| `-/run/user/1000                                      tmpfs                       tmpfs           rw,nosuid,nodev,relatime,size=824160k,nr_inodes=206040,mode=700,uid=1000,gid=1000
|   |-/run/user/1000/gvfs                               gvfsd-fuse                  fuse.gvfsd-fuse rw,nosuid,nodev,relatime,user_id=1000,group_id=1000
|   `-/run/user/1000/doc                                portal                      fuse.portal     rw,nosuid,nodev,relatime,user_id=1000,group_id=1000
|-/boot/firmware                                        /dev/mmcblk0p1              vfat            rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro
|-/home/admin/Multimedia                                //192.168.100.50/Multimedia cifs            rw,relatime,vers=2.1,cache=strict,username=admin,uid=1000,noforceuid,gid=1000,noforcegid,addr=192.168.100.50,file_mode=0755,dir_mode=0755,soft,nounix,serverino,mapposix,rsize=1048576,wsize=1048576,bsize=1048576,echo_interval=60,actimeo=1,closetimeo=1
`-/home/Multimedia                                      /etc/auto.nfs               autofs          rw,relatime,fd=6,pgrp=1102,timeout=300,minproto=5,maxproto=5,indirect,pipe_ino=8011

Files in neuralgic directories:

/var:
1.3G	/var/
684M	/var/cache
671M	/var/cache/apt
556M	/var/cache/apt/archives
294M	/var/lib

Archived and active journals take up 161.5M in the file system.

/opt/iobroker/backups:
du: cannot access '/opt/iobroker/backups/': No such file or directory

/opt/iobroker/iobroker-data:
20K	/opt/iobroker/iobroker-data/
4.0K	/opt/iobroker/iobroker-data/backup-objects

The five largest files in iobroker-data are:
8.0K	/opt/iobroker/iobroker-data/iobroker.json
4.0K	/opt/iobroker/iobroker-data/objects.jsonl
0	/opt/iobroker/iobroker-data/states.jsonl

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':

No Devices found 'by-id'




*** NodeJS-Installation ***

/usr/bin/nodejs 	v20.13.1
/usr/bin/node 		v20.13.1
/usr/bin/npm 		10.8.0
/usr/bin/npx 		10.8.0
/usr/bin/corepack 	0.28.0


nodejs:
  Installed: 20.13.1-1nodesource1
  Candidate: 20.13.1-1nodesource1
  Version table:
 *** 20.13.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
        100 /var/lib/dpkg/status
     20.13.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.12.2-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.12.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.12.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.11.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.11.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.10.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.9.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.8.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.8.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.7.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.6.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.6.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.5.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.5.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.4.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.3.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.3.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.2.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.1.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.0.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     18.19.0+dfsg-6~deb12u1 500
        500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages
     18.13.0+dfsg1-1 500
        500 http://deb.debian.org/debian bookworm/main arm64 Packages

find: '/opt/iobroker/node_modules': No such file or directory
Temp directories causing npm8 problem: 0
No problems detected

Errors in npm tree:

*** ioBroker-Installation ***

ioBroker Status
node:internal/modules/cjs/loader:1148
  throw err;
  ^

Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js'
    at Module._resolveFilename (node:internal/modules/cjs/loader:1145:15)
    at Module._load (node:internal/modules/cjs/loader:986:27)
    at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:174:12)
    at node:internal/main/run_main_module:28:49 {
  code: 'MODULE_NOT_FOUND',
  requireStack: []
}

Node.js v20.13.1

Core adapters versions
node:internal/modules/cjs/loader:1148
  throw err;
  ^

Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js'
    at Module._resolveFilename (node:internal/modules/cjs/loader:1145:15)
    at Module._load (node:internal/modules/cjs/loader:986:27)
    at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:174:12)
    at node:internal/main/run_main_module:28:49 {
  code: 'MODULE_NOT_FOUND',
  requireStack: []
}

Node.js v20.13.1
js-controller: 	
node:internal/modules/cjs/loader:1148
  throw err;
  ^

Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js'
    at Module._resolveFilename (node:internal/modules/cjs/loader:1145:15)
    at Module._load (node:internal/modules/cjs/loader:986:27)
    at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:174:12)
    at node:internal/main/run_main_module:28:49 {
  code: 'MODULE_NOT_FOUND',
  requireStack: []
}

Node.js v20.13.1
admin: 		
node:internal/modules/cjs/loader:1148
  throw err;
  ^

Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js'
    at Module._resolveFilename (node:internal/modules/cjs/loader:1145:15)
    at Module._load (node:internal/modules/cjs/loader:986:27)
    at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:174:12)
    at node:internal/main/run_main_module:28:49 {
  code: 'MODULE_NOT_FOUND',
  requireStack: []
}

Node.js v20.13.1
javascript: 	

nodejs modules from github: 	0

Adapter State


Enabled adapters with bindings

ioBroker-Repositories
node:internal/modules/cjs/loader:1148
  throw err;
  ^

Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js'
    at Module._resolveFilename (node:internal/modules/cjs/loader:1145:15)
    at Module._load (node:internal/modules/cjs/loader:986:27)
    at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:174:12)
    at node:internal/main/run_main_module:28:49 {
  code: 'MODULE_NOT_FOUND',
  requireStack: []
}

Node.js v20.13.1

Installed ioBroker-Instances
node:internal/modules/cjs/loader:1148
  throw err;
  ^

Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js'
    at Module._resolveFilename (node:internal/modules/cjs/loader:1145:15)
    at Module._load (node:internal/modules/cjs/loader:986:27)
    at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:174:12)
    at node:internal/main/run_main_module:28:49 {
  code: 'MODULE_NOT_FOUND',
  requireStack: []
}

Node.js v20.13.1

Objects and States
Please stand by - This may take a while
Objects: 	0
States: 	0

*** OS-Repositories and Updates ***
W: Target Packages (main/binary-arm64/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2
W: Target Packages (main/binary-armhf/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2
W: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2
W: Target Translations (main/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2
W: Target Translations (main/i18n/Translation-de) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2
W: Target Packages (main/binary-arm64/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2
W: Target Packages (main/binary-armhf/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2
W: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2
W: Target Translations (main/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2
W: Target Translations (main/i18n/Translation-de) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2
Hit:1 http://deb.debian.org/debian bookworm InRelease
Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease
Hit:3 http://deb.debian.org/debian bookworm-updates InRelease
Hit:4 https://repos.influxdata.com/debian stable InRelease
Hit:5 http://archive.raspberrypi.com/debian bookworm InRelease
Hit:6 https://apt.grafana.com stable InRelease
Hit:7 https://deb.nodesource.com/node_20.x nodistro InRelease
Reading package lists...
W: Target Packages (main/binary-arm64/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2
W: Target Packages (main/binary-armhf/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2
W: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2
W: Target Translations (main/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2
W: Target Translations (main/i18n/Translation-de) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2
W: Target Packages (main/binary-arm64/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2
W: Target Packages (main/binary-armhf/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2
W: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2
W: Target Translations (main/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2
W: Target Translations (main/i18n/Translation-de) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name    
tcp        0      0 0.0.0.0:44347           0.0.0.0:*               LISTEN      0          7962       -                   
tcp        0      0 0.0.0.0:3483            0.0.0.0:*               LISTEN      112        8573       981/perl            
tcp        0      0 0.0.0.0:2049            0.0.0.0:*               LISTEN      0          7953       -                   
tcp        0      0 127.0.0.1:631           0.0.0.0:*               LISTEN      0          7090       895/cupsd           
tcp        0      0 0.0.0.0:52215           0.0.0.0:*               LISTEN      103        6107       1017/rpc.statd      
tcp        0      0 0.0.0.0:46757           0.0.0.0:*               LISTEN      0          7920       1021/rpc.mountd     
tcp        0      0 0.0.0.0:55171           0.0.0.0:*               LISTEN      0          7912       1021/rpc.mountd     
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          7857       911/sshd: /usr/sbin 
tcp        0      0 0.0.0.0:111             0.0.0.0:*               LISTEN      0          3446       1/init              
tcp        0      0 0.0.0.0:32943           0.0.0.0:*               LISTEN      0          7928       1021/rpc.mountd     
tcp        0      0 0.0.0.0:9000            0.0.0.0:*               LISTEN      112        8584       981/perl            
tcp        0      0 0.0.0.0:9090            0.0.0.0:*               LISTEN      112        8576       981/perl            
tcp6       0      0 :::8086                 :::*                    LISTEN      113        9255       985/influxd         
tcp6       0      0 :::2049                 :::*                    LISTEN      0          7956       -                   
tcp6       0      0 :::43339                :::*                    LISTEN      103        6113       1017/rpc.statd      
tcp6       0      0 :::35707                :::*                    LISTEN      0          7964       -                   
tcp6       0      0 :::3000                 :::*                    LISTEN      114        11323      1326/grafana        
tcp6       0      0 ::1:631                 :::*                    LISTEN      0          7089       895/cupsd           
tcp6       0      0 :::22                   :::*                    LISTEN      0          7859       911/sshd: /usr/sbin 
tcp6       0      0 :::111                  :::*                    LISTEN      0          4180       1/init              
tcp6       0      0 :::45779                :::*                    LISTEN      0          7932       1021/rpc.mountd     
tcp6       0      0 :::41721                :::*                    LISTEN      0          7924       1021/rpc.mountd     
tcp6       0      0 :::54261                :::*                    LISTEN      0          7916       1021/rpc.mountd     
udp        0      0 0.0.0.0:59354           0.0.0.0:*                           112        8574       981/perl            
udp        0      0 0.0.0.0:35215           0.0.0.0:*                           104        4620       724/avahi-daemon: r 
udp        0      0 0.0.0.0:3483            0.0.0.0:*                           112        8572       981/perl            
udp        0      0 0.0.0.0:52918           0.0.0.0:*                           0          7910       1021/rpc.mountd     
udp        0      0 0.0.0.0:111             0.0.0.0:*                           0          3447       1/init              
udp        0      0 0.0.0.0:49338           0.0.0.0:*                           0          7926       1021/rpc.mountd     
udp        0      0 0.0.0.0:631             0.0.0.0:*                           0          8289       971/cups-browsed    
udp        0      0 0.0.0.0:53888           0.0.0.0:*                           103        6104       1017/rpc.statd      
udp        0      0 127.0.0.1:769           0.0.0.0:*                           0          6091       1017/rpc.statd      
udp        0      0 224.0.0.251:5353        0.0.0.0:*                           1000       49412      10205/chromium-brow 
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           104        4618       724/avahi-daemon: r 
udp        0      0 0.0.0.0:46664           0.0.0.0:*                           0          7918       1021/rpc.mountd     
udp        0      0 0.0.0.0:42815           0.0.0.0:*                           0          7961       -                   
udp6       0      0 :::34874                :::*                                0          7914       1021/rpc.mountd     
udp6       0      0 :::55421                :::*                                0          7922       1021/rpc.mountd     
udp6       0      0 :::111                  :::*                                0          6298       1/init              
udp6       0      0 :::5353                 :::*                                104        4619       724/avahi-daemon: r 
udp6       0      0 :::38193                :::*                                0          7963       -                   
udp6       0      0 :::54609                :::*                                104        4621       724/avahi-daemon: r 
udp6       0      0 :::50555                :::*                                103        6110       1017/rpc.statd      
udp6       0      0 :::38707                :::*                                0          7930       1021/rpc.mountd     

*** Log File - Last 25 Lines ***

}" to "system.host.raspberrypi": DB closed
2024-05-17 09:43:21.009  - info: host.raspberrypi iobroker.js-controller version 5.0.19 js-controller starting
2024-05-17 09:43:21.012  - info: host.raspberrypi Copyright (c) 2014-2023 bluefox, 2014 hobbyquaker
2024-05-17 09:43:21.013  - info: host.raspberrypi hostname: raspberrypi, node: v20.13.1
2024-05-17 09:43:21.013  - info: host.raspberrypi ip addresses: 192.168.100.134 fe80::432d:fefe:8e79:9c2d
2024-05-17 09:43:21.132  - error: host.raspberrypi Cannot read system.config: null (OK when migrating or restoring)
2024-05-17 09:43:21.186  - error: host.raspberrypi Cannot find view "system" for search "host"
2024-05-17 09:43:21.192  - info: host.raspberrypi-Server  Error inMem-objects listening on port 9000: Error: listen EADDRINUSE: address already in use 127.0.0.1:9000
2024-05-17 09:43:51.019  - error: host.raspberrypi No connection to databases possible, restart
2024-05-17 09:43:51.023  - info: host.raspberrypi iobroker _restart
2024-05-17 09:43:51.065  - error: host.raspberrypi iobroker node:internal/modules/cjs/loader:1148  throw err;  ^Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js'    at Module._resolveFilename (node:internal/modules/cjs/loader:1145:15)    at Module._load (node:internal/modules/cjs/loader:986:27)    at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:174:12)    at node:internal/main/run_main_module:28:49 {  code: 'MODULE_NOT_FOUND',  requireStack: []}Node.js v20.13.1
2024-05-17 09:43:51.069  - error: host.raspberrypi [sendTo] Could not push message "{
  command: 'cmdStderr',
  message: {
    id: undefined,
    data: "node:internal/modules/cjs/loader:1148  throw err;  ^Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js'    at Module._resolveFilename (node:internal/modules/cjs/loader:1145:15)    at Module._load (node:internal/modules/cjs/loader:986:27)    at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:174:12)    at node:internal/main/run_main_module:28:49 {  code: 'MODULE_NOT_FOUND',  requireStack: []}Node.js v20.13.1"
  },
  from: 'system.host.raspberrypi'
}" to "system.host.raspberrypi": DB closed
2024-05-17 09:43:51.071  - info: host.raspberrypi iobroker exit 1
2024-05-17 09:43:51.072  - error: host.raspberrypi [sendTo] Could not push message "{
  command: 'cmdExit',
  message: { id: undefined, data: 1 },
  from: 'system.host.raspberrypi'
}" to "system.host.raspberrypi": DB closed

============ Mark until here for C&P =============

iob diag has finished.

Press any key for a summary

Homoran

@homoran sagte in Installation von iobroker Abbruch bei 3/4 mit Meldung ab..:

@wikato Bitte mehr Informationen zu deinem System!
Hardware und Programme.

@wikato sagte in iobroker installation fehler bei 3/4 mit meldung....:

Could not connect to states database at 127.0.0.1:9000

läuft da noch was?

@wikato sagte in iobroker installation fehler bei 3/4 mit meldung....:

A complete log of this run can be found in: /home/admin/.npm/_logs/2024-05-17T07_42_17_690Z-debug-0.log

Was steht da drin.

ich beantworte das mal selber:
anscheinend eine ganze Menge!

u.a.

@wikato sagte in Installation von iobroker Abbruch bei 3/4 mit Meldung ab..:

tcp 0 0 0.0.0.0:9000 0.0.0.0:* LISTEN 112 8584 981/perl

Frei nach Highlander: Es kann nur einen geben!
der Port für die interne iobroker Datenbank ist vergeben!

wikato

@homoran tatsächlich...ich habe noch den lms (logitech media server) drauf, welcher auf dem port 9000 läuft

bahnuhr

@wikato sagte in Installation von iobroker Abbruch bei 3/4 mit Meldung ab..:

usr/bin/nodejs v20.13.1 /usr/bin/node v20.13.1 /usr/bin/npm 10.8.0 /usr/bin/npx 10.8.0

und node 20 ist nicht stable !

wendy2702

@bahnuhr sagte in Installation von iobroker Abbruch bei 3/4 mit Meldung ab..:

node v20.13.1

Ist sogar LTS...

Halt nur noch nicht für IOB empfohlen.

wikato

@homoran said in Installation von iobroker Abbruch bei 3/4 mit Meldung ab..:

iobroker

Habe nun den LMS auf einen anderen Port gewechselt...und siehe da, jetzt funktionierts.
Vielen Dank allen die hier geholfen haben!

Thomas Braun

@wikato

Schalt den Desktop aus...

*** Display-Server-Setup ***
Display-Server: true
Desktop: 	LXDE-pi-wayfire
Terminal: 	wayland
Boot Target: 	graphical.target

Räum die grafana.list auf. Da sind Doubletten drin.

W: Target Packages (main/binary-arm64/Packages) is configured multiple times in /etc/apt/sources.list.d/grafana.list:1 and /etc/apt/sources.list.d/grafana.list:2

wikato

@thomas-braun Hallo Thomas, uhhh...da bin ich schon wieder überfragt wie das geht...
Nun ich denke den Desktop sollte ich wegen den Ressourcen ausschalten.
Das andere ist wohl einfach aufräumen...
Kannst Du mir da mitgeben wie das zu tun ist?

Thomas Braun

@wikato sagte in Installation von iobroker Abbruch bei 3/4 mit Meldung ab..:

@thomas-braun Hallo Thomas, uhhh...da bin ich schon wieder überfragt wie das geht...
Nun ich denke den Desktop sollte ich wegen den Ressourcen ausschalten.

Nicht nur. Auch aus Sicherheits und Komplexitätsgründen...
Auf einem Serversystem läuft nur das notwendigste. Desktop = absolut unnötig.

sudo systemctl set-default multi-user.target
sudo reboot

knipst den Kram aus.

Das andere ist wohl einfach aufräumen...
Kannst Du mir da mitgeben wie das zu tun ist?

Lösch den doppelten Eintrag/die doppelte Zeile aus der Datei /etc/apt/sources.list.d/grafana.list heraus.

NEWS

Installation von iobroker Abbruch bei 3/4 mit Meldung ab..

Support us

813
Online

31.7k
Users

79.7k
Topics

1.3m
Posts

NEWS

Installation von iobroker Abbruch bei 3/4 mit Meldung ab..

Support us

813Online

31.7kUsers

79.7kTopics

1.3mPosts

813
Online

31.7k
Users

79.7k
Topics

1.3m
Posts