Test Adapter rpi2 2.x
-
@garfonso Das passt zu dem was ich in der Zwischenzeit mit meinem Halbwissen ergoogelt habe.
AMA0 soll korrekt sein.
serial0 auch
ttyS0 auchIrgendwo hab ich noch gefunden, dass wohl AMA0 im Moment (??) gar nicht funktioniert, das Paket (welches auch immer) sei broken.
Irgendwo stand auch etwas davon, dass man nur die GPIOs aktivieren soll, die man nutzt, sonst gäbe es Probleme
-
@garfonso said in Test Adapter rpi2 2.x:
gpioinfo
Ich habe die neueste Version RPI2 soeben aktualisiert. Außerdem habe ich die Eingänge GPIO14 und 15 deaktiviert. Und hier die Ausgabe :
pi@Raspi58GB:~ $ gpioinfo gpiochip0 - 54 lines: line 0: "ID_SDA" unused input active-high line 1: "ID_SCL" unused input active-high line 2: "GPIO2" unused input active-high line 3: "GPIO3" unused input active-high line 4: "GPIO4" unused input active-high line 5: "GPIO5" unused input active-high line 6: "GPIO6" unused input active-high line 7: "GPIO7" unused input active-high line 8: "GPIO8" unused input active-high line 9: "GPIO9" unused input active-high line 10: "GPIO10" unused input active-high line 11: "GPIO11" unused input active-high line 12: "GPIO12" unused input active-high line 13: "GPIO13" unused input active-high line 14: "GPIO14" unused input active-high line 15: "GPIO15" unused input active-high line 16: "GPIO16" unused input active-high line 17: "GPIO17" "opengpio_4_17_watch" input active-high [used] line 18: "GPIO18" unused input active-high line 19: "GPIO19" unused input active-high line 20: "GPIO20" unused input active-high line 21: "GPIO21" unused input active-high line 22: "GPIO22" "opengpio_4_22_watch" input active-high [used] line 23: "GPIO23" unused input active-high line 24: "GPIO24" unused input active-high line 25: "GPIO25" unused input active-high line 26: "GPIO26" unused input active-high line 27: "GPIO27" unused input active-high line 28: "PCIE_RP1_WAKE" unused input active-high line 29: "FAN_TACH" unused input active-high line 30: "HOST_SDA" unused input active-high line 31: "HOST_SCL" unused input active-high line 32: "ETH_RST_N" "phy-reset" output active-low [used] line 33: "-" unused input active-high line 34: "CD0_IO0_MICCLK" "cam0_reg" output active-high [used] line 35: "CD0_IO0_MICDAT0" unused input active-high line 36: "RP1_PCIE_CLKREQ_N" unused input active-high line 37: "-" unused input active-high line 38: "CD0_SDA" unused input active-high line 39: "CD0_SCL" unused input active-high line 40: "CD1_SDA" unused input active-high line 41: "CD1_SCL" unused input active-high line 42: "USB_VBUS_EN" unused output active-high line 43: "USB_OC_N" unused input active-high line 44: "RP1_STAT_LED" "PWR" output active-low [used] line 45: "FAN_PWM" unused input active-high line 46: "CD1_IO0_MICCLK" "cam1_reg" output active-high [used] line 47: "2712_WAKE" unused input active-high line 48: "CD1_IO1_MICDAT1" unused input active-high line 49: "EN_MAX_USB_CUR" unused output active-high line 50: "-" unused input active-high line 51: "-" unused input active-high line 52: "-" unused input active-high line 53: "-" unused input active-high gpiochip10 - 32 lines: line 0: "-" unused input active-high line 1: "2712_BOOT_CS_N" "spi10 CS0" output active-low [used] line 2: "2712_BOOT_MISO" unused input active-high line 3: "2712_BOOT_MOSI" unused input active-high line 4: "2712_BOOT_SCLK" unused input active-high line 5: "-" unused input active-high line 6: "-" unused input active-high line 7: "-" unused input active-high line 8: "-" unused input active-high line 9: "-" unused input active-high line 10: "-" unused input active-high line 11: "-" unused input active-high line 12: "-" unused input active-high line 13: "-" unused input active-high line 14: "PCIE_SDA" unused input active-high line 15: "PCIE_SCL" unused input active-high line 16: "-" unused input active-high line 17: "-" unused input active-high line 18: "-" unused input active-high line 19: "-" unused input active-high line 20: "PWR_GPIO" "pwr_button" input active-low [used] line 21: "2712_G21_FS" unused input active-high line 22: "-" unused input active-high line 23: "-" unused input active-high line 24: "BT_RTS" unused input active-high line 25: "BT_CTS" unused input active-high line 26: "BT_TXD" unused input active-high line 27: "BT_RXD" unused input active-high line 28: "WL_ON" "wl_on_reg" output active-high [used] line 29: "BT_ON" "shutdown" output active-high [used] line 30: "WIFI_SDIO_CLK" unused input active-high line 31: "WIFI_SDIO_CMD" unused input active-high gpiochip11 - 4 lines: line 0: "WIFI_SDIO_D0" unused input active-high line 1: "WIFI_SDIO_D1" unused input active-high line 2: "WIFI_SDIO_D2" unused input active-high line 3: "WIFI_SDIO_D3" unused input active-high gpiochip12 - 17 lines: line 0: "RP1_SDA" unused input active-high line 1: "RP1_SCL" unused input active-high line 2: "RP1_RUN" "RP1 RUN pin" output active-high [used] line 3: "SD_IOVDD_SEL" "vdd-sd-io" output active-high [used] line 4: "SD_PWR_ON" "sd_vcc_reg" output active-high [used] line 5: "SD_CDET_N" "cd" input active-low [used] line 6: "SD_FLG_N" unused input active-high line 7: "-" unused input active-high line 8: "2712_WAKE" unused input active-high line 9: "2712_STAT_LED" "ACT" output active-low [used] line 10: "-" unused input active-high line 11: "-" unused input active-high line 12: "PMIC_INT" unused input active-high line 13: "UART_TX_FS" unused input active-high line 14: "UART_RX_FS" unused input active-high line 15: "-" unused input active-high line 16: "-" unused input active-high gpiochip13 - 6 lines: line 0: "HDMI0_SCL" unused input active-high line 1: "HDMI0_SDA" unused input active-high line 2: "HDMI1_SCL" unused input active-high line 3: "HDMI1_SDA" unused input active-high line 4: "PMIC_SCL" unused input active-high line 5: "PMIC_SDA" unused input active-high gpiochip14 - 7 lines: line 0: unnamed unused input active-high line 1: unnamed unused input active-high line 2: unnamed unused input active-high line 3: unnamed unused input active-high line 4: unnamed unused input active-high line 5: unnamed unused input active-high line 6: unnamed unused input active-high gpiochip0 - 54 lines: line 0: "ID_SDA" unused input active-high line 1: "ID_SCL" unused input active-high line 2: "GPIO2" unused input active-high line 3: "GPIO3" unused input active-high line 4: "GPIO4" unused input active-high line 5: "GPIO5" unused input active-high line 6: "GPIO6" unused input active-high line 7: "GPIO7" unused input active-high line 8: "GPIO8" unused input active-high line 9: "GPIO9" unused input active-high line 10: "GPIO10" unused input active-high line 11: "GPIO11" unused input active-high line 12: "GPIO12" unused input active-high line 13: "GPIO13" unused input active-high line 14: "GPIO14" unused input active-high line 15: "GPIO15" unused input active-high line 16: "GPIO16" unused input active-high line 17: "GPIO17" "opengpio_4_17_watch" input active-high [used] line 18: "GPIO18" unused input active-high line 19: "GPIO19" unused input active-high line 20: "GPIO20" unused input active-high line 21: "GPIO21" unused input active-high line 22: "GPIO22" "opengpio_4_22_watch" input active-high [used] line 23: "GPIO23" unused input active-high line 24: "GPIO24" unused input active-high line 25: "GPIO25" unused input active-high line 26: "GPIO26" unused input active-high line 27: "GPIO27" unused input active-high line 28: "PCIE_RP1_WAKE" unused input active-high line 29: "FAN_TACH" unused input active-high line 30: "HOST_SDA" unused input active-high line 31: "HOST_SCL" unused input active-high line 32: "ETH_RST_N" "phy-reset" output active-low [used] line 33: "-" unused input active-high line 34: "CD0_IO0_MICCLK" "cam0_reg" output active-high [used] line 35: "CD0_IO0_MICDAT0" unused input active-high line 36: "RP1_PCIE_CLKREQ_N" unused input active-high line 37: "-" unused input active-high line 38: "CD0_SDA" unused input active-high line 39: "CD0_SCL" unused input active-high line 40: "CD1_SDA" unused input active-high line 41: "CD1_SCL" unused input active-high line 42: "USB_VBUS_EN" unused output active-high line 43: "USB_OC_N" unused input active-high line 44: "RP1_STAT_LED" "PWR" output active-low [used] line 45: "FAN_PWM" unused input active-high line 46: "CD1_IO0_MICCLK" "cam1_reg" output active-high [used] line 47: "2712_WAKE" unused input active-high line 48: "CD1_IO1_MICDAT1" unused input active-high line 49: "EN_MAX_USB_CUR" unused output active-high line 50: "-" unused input active-high line 51: "-" unused input active-high line 52: "-" unused input active-high line 53: "-" unused input active-high -
@searcher57 said in Test Adapter rpi2 2.x:
@garfonso said in Test Adapter rpi2 2.x:
gpioinfo
Ich habe die neueste Version RPI2 soeben aktualisiert. Außerdem habe ich die Eingänge GPIO14 und 15 deaktiviert. Und hier die Ausgabe :
pi@Raspi58GB:~ $ gpioinfo gpiochip0 - 54 lines: line 0: "ID_SDA" unused input active-high line 1: "ID_SCL" unused input active-high line 2: "GPIO2" unused input active-high line 3: "GPIO3" unused input active-high line 4: "GPIO4" unused input active-high line 5: "GPIO5" unused input active-high line 6: "GPIO6" unused input active-high line 7: "GPIO7" unused input active-high line 8: "GPIO8" unused input active-high line 9: "GPIO9" unused input active-high line 10: "GPIO10" unused input active-high line 11: "GPIO11" unused input active-high line 12: "GPIO12" unused input active-high line 13: "GPIO13" unused input active-high line 14: "GPIO14" unused input active-high line 15: "GPIO15" unused input active-high line 16: "GPIO16" unused input active-high line 17: "GPIO17" "opengpio_4_17_watch" input active-high [used] line 18: "GPIO18" unused input active-high line 19: "GPIO19" unused input active-high line 20: "GPIO20" unused input active-high line 21: "GPIO21" unused input active-high line 22: "GPIO22" "opengpio_4_22_watch" input active-high [used] line 23: "GPIO23" unused input active-high line 24: "GPIO24" unused input active-high line 25: "GPIO25" unused input active-high line 26: "GPIO26" unused input active-high line 27: "GPIO27" unused input active-high line 28: "PCIE_RP1_WAKE" unused input active-high line 29: "FAN_TACH" unused input active-high line 30: "HOST_SDA" unused input active-high line 31: "HOST_SCL" unused input active-high line 32: "ETH_RST_N" "phy-reset" output active-low [used] line 33: "-" unused input active-high line 34: "CD0_IO0_MICCLK" "cam0_reg" output active-high [used] line 35: "CD0_IO0_MICDAT0" unused input active-high line 36: "RP1_PCIE_CLKREQ_N" unused input active-high line 37: "-" unused input active-high line 38: "CD0_SDA" unused input active-high line 39: "CD0_SCL" unused input active-high line 40: "CD1_SDA" unused input active-high line 41: "CD1_SCL" unused input active-high line 42: "USB_VBUS_EN" unused output active-high line 43: "USB_OC_N" unused input active-high line 44: "RP1_STAT_LED" "PWR" output active-low [used] line 45: "FAN_PWM" unused input active-high line 46: "CD1_IO0_MICCLK" "cam1_reg" output active-high [used] line 47: "2712_WAKE" unused input active-high line 48: "CD1_IO1_MICDAT1" unused input active-high line 49: "EN_MAX_USB_CUR" unused output active-high line 50: "-" unused input active-high line 51: "-" unused input active-high line 52: "-" unused input active-high line 53: "-" unused input active-high gpiochip10 - 32 lines: line 0: "-" unused input active-high line 1: "2712_BOOT_CS_N" "spi10 CS0" output active-low [used] line 2: "2712_BOOT_MISO" unused input active-high line 3: "2712_BOOT_MOSI" unused input active-high line 4: "2712_BOOT_SCLK" unused input active-high line 5: "-" unused input active-high line 6: "-" unused input active-high line 7: "-" unused input active-high line 8: "-" unused input active-high line 9: "-" unused input active-high line 10: "-" unused input active-high line 11: "-" unused input active-high line 12: "-" unused input active-high line 13: "-" unused input active-high line 14: "PCIE_SDA" unused input active-high line 15: "PCIE_SCL" unused input active-high line 16: "-" unused input active-high line 17: "-" unused input active-high line 18: "-" unused input active-high line 19: "-" unused input active-high line 20: "PWR_GPIO" "pwr_button" input active-low [used] line 21: "2712_G21_FS" unused input active-high line 22: "-" unused input active-high line 23: "-" unused input active-high line 24: "BT_RTS" unused input active-high line 25: "BT_CTS" unused input active-high line 26: "BT_TXD" unused input active-high line 27: "BT_RXD" unused input active-high line 28: "WL_ON" "wl_on_reg" output active-high [used] line 29: "BT_ON" "shutdown" output active-high [used] line 30: "WIFI_SDIO_CLK" unused input active-high line 31: "WIFI_SDIO_CMD" unused input active-high gpiochip11 - 4 lines: line 0: "WIFI_SDIO_D0" unused input active-high line 1: "WIFI_SDIO_D1" unused input active-high line 2: "WIFI_SDIO_D2" unused input active-high line 3: "WIFI_SDIO_D3" unused input active-high gpiochip12 - 17 lines: line 0: "RP1_SDA" unused input active-high line 1: "RP1_SCL" unused input active-high line 2: "RP1_RUN" "RP1 RUN pin" output active-high [used] line 3: "SD_IOVDD_SEL" "vdd-sd-io" output active-high [used] line 4: "SD_PWR_ON" "sd_vcc_reg" output active-high [used] line 5: "SD_CDET_N" "cd" input active-low [used] line 6: "SD_FLG_N" unused input active-high line 7: "-" unused input active-high line 8: "2712_WAKE" unused input active-high line 9: "2712_STAT_LED" "ACT" output active-low [used] line 10: "-" unused input active-high line 11: "-" unused input active-high line 12: "PMIC_INT" unused input active-high line 13: "UART_TX_FS" unused input active-high line 14: "UART_RX_FS" unused input active-high line 15: "-" unused input active-high line 16: "-" unused input active-high gpiochip13 - 6 lines: line 0: "HDMI0_SCL" unused input active-high line 1: "HDMI0_SDA" unused input active-high line 2: "HDMI1_SCL" unused input active-high line 3: "HDMI1_SDA" unused input active-high line 4: "PMIC_SCL" unused input active-high line 5: "PMIC_SDA" unused input active-high gpiochip14 - 7 lines: line 0: unnamed unused input active-high line 1: unnamed unused input active-high line 2: unnamed unused input active-high line 3: unnamed unused input active-high line 4: unnamed unused input active-high line 5: unnamed unused input active-high line 6: unnamed unused input active-high gpiochip0 - 54 lines: line 0: "ID_SDA" unused input active-high line 1: "ID_SCL" unused input active-high line 2: "GPIO2" unused input active-high line 3: "GPIO3" unused input active-high line 4: "GPIO4" unused input active-high line 5: "GPIO5" unused input active-high line 6: "GPIO6" unused input active-high line 7: "GPIO7" unused input active-high line 8: "GPIO8" unused input active-high line 9: "GPIO9" unused input active-high line 10: "GPIO10" unused input active-high line 11: "GPIO11" unused input active-high line 12: "GPIO12" unused input active-high line 13: "GPIO13" unused input active-high line 14: "GPIO14" unused input active-high line 15: "GPIO15" unused input active-high line 16: "GPIO16" unused input active-high line 17: "GPIO17" "opengpio_4_17_watch" input active-high [used] line 18: "GPIO18" unused input active-high line 19: "GPIO19" unused input active-high line 20: "GPIO20" unused input active-high line 21: "GPIO21" unused input active-high line 22: "GPIO22" "opengpio_4_22_watch" input active-high [used] line 23: "GPIO23" unused input active-high line 24: "GPIO24" unused input active-high line 25: "GPIO25" unused input active-high line 26: "GPIO26" unused input active-high line 27: "GPIO27" unused input active-high line 28: "PCIE_RP1_WAKE" unused input active-high line 29: "FAN_TACH" unused input active-high line 30: "HOST_SDA" unused input active-high line 31: "HOST_SCL" unused input active-high line 32: "ETH_RST_N" "phy-reset" output active-low [used] line 33: "-" unused input active-high line 34: "CD0_IO0_MICCLK" "cam0_reg" output active-high [used] line 35: "CD0_IO0_MICDAT0" unused input active-high line 36: "RP1_PCIE_CLKREQ_N" unused input active-high line 37: "-" unused input active-high line 38: "CD0_SDA" unused input active-high line 39: "CD0_SCL" unused input active-high line 40: "CD1_SDA" unused input active-high line 41: "CD1_SCL" unused input active-high line 42: "USB_VBUS_EN" unused output active-high line 43: "USB_OC_N" unused input active-high line 44: "RP1_STAT_LED" "PWR" output active-low [used] line 45: "FAN_PWM" unused input active-high line 46: "CD1_IO0_MICCLK" "cam1_reg" output active-high [used] line 47: "2712_WAKE" unused input active-high line 48: "CD1_IO1_MICDAT1" unused input active-high line 49: "EN_MAX_USB_CUR" unused output active-high line 50: "-" unused input active-high line 51: "-" unused input active-high line 52: "-" unused input active-high line 53: "-" unused input active-highWenn ich Dich richtig verstehe, dann müsste doch auch gpiochip15 aufgeführt sein, oder...?
-
@searcher57 ich möchte jetzt mein halbwegs funktionierendes System nicht zerschießen. Was benötige ich , um die GPIO- Kommandos auszuführen? ZB. gpioinfo?
-
@laser sagte in Test Adapter rpi2 2.x:
Was benötige ich , um die GPIO- Kommandos auszuführen? ZB. gpioinfo?
einen Raspi und ein Terminal
-
@homoran toller Tip!
gpioinfo
-bash: gpioinfo: command not found -
-
@laser
kannst du da ein debug log geben? -
@thomas-braun sagte in Test Adapter rpi2 2.x:
Das Paket nennt sich
gpiod
dann hat @laser noch nicht den bookworm "patch"?
dann würde ich an seiner Stelle das Paket nicht installieren. -
@homoran einen bookworm "patch" habe ich nicht wissentlich installiert.
-
@laser said in Test Adapter rpi2 2.x:
@searcher57 ich möchte jetzt mein halbwegs funktionierendes System nicht zerschießen. Was benötige ich , um die GPIO- Kommandos auszuführen? ZB. gpioinfo?
Aber das war das doch, oder...)
-
@searcher57 die Antworten sind immer sehr kurz formuliert. Kann ich so nicht verstehen.
-
@laser said in Test Adapter rpi2 2.x:
@searcher57 die Antworten sind immer sehr kurz formuliert. Kann ich so nicht verstehen.
Ich habe doch oben die Ausgabe von gpioinfo gegeben.
-
@searcher57 ja, aber ich kann den Befehl "gpioinfo" nicht ausführen. Den gibt es bei mir nicht.
-
sudo apt update && apt policy gpiod -
@laser said in Test Adapter rpi2 2.x:
@searcher57 ja, aber ich kann den Befehl "gpioinfo" nicht ausführen. Den gibt es bei mir nicht.
Ja und was brauchst Du dann?
-
@thomas-braun sagte in Test Adapter rpi2 2.x:
sudo apt update && apt policy gpiod
und das ist der bookworm- patch?
@searcher57 Das weiß ich eben nicht, was ich installieren muß, um den Befehl zu bekommen. -
Das ist das Paket, welche das Kommando
gpioinfobeinhaltet. -
@thomas-braun habe ich ausgeführt, aber:
gpioinfo
-bash: gpioinfo: command not found -
