Test Adapter rpi2 2.x

searcher57

@searcher57 said in Test Adapter rpi2 2.x:

@garfonso said in Test Adapter rpi2 2.x:

gpioinfo

Ich habe die neueste Version RPI2 soeben aktualisiert. Außerdem habe ich die Eingänge GPIO14 und 15 deaktiviert. Und hier die Ausgabe :

pi@Raspi58GB:~ $ gpioinfo
gpiochip0 - 54 lines:
        line   0:     "ID_SDA"       unused   input  active-high
        line   1:     "ID_SCL"       unused   input  active-high
        line   2:      "GPIO2"       unused   input  active-high
        line   3:      "GPIO3"       unused   input  active-high
        line   4:      "GPIO4"       unused   input  active-high
        line   5:      "GPIO5"       unused   input  active-high
        line   6:      "GPIO6"       unused   input  active-high
        line   7:      "GPIO7"       unused   input  active-high
        line   8:      "GPIO8"       unused   input  active-high
        line   9:      "GPIO9"       unused   input  active-high
        line  10:     "GPIO10"       unused   input  active-high
        line  11:     "GPIO11"       unused   input  active-high
        line  12:     "GPIO12"       unused   input  active-high
        line  13:     "GPIO13"       unused   input  active-high
        line  14:     "GPIO14"       unused   input  active-high
        line  15:     "GPIO15"       unused   input  active-high
        line  16:     "GPIO16"       unused   input  active-high
        line  17:     "GPIO17" "opengpio_4_17_watch" input active-high [used]
        line  18:     "GPIO18"       unused   input  active-high
        line  19:     "GPIO19"       unused   input  active-high
        line  20:     "GPIO20"       unused   input  active-high
        line  21:     "GPIO21"       unused   input  active-high
        line  22:     "GPIO22" "opengpio_4_22_watch" input active-high [used]
        line  23:     "GPIO23"       unused   input  active-high
        line  24:     "GPIO24"       unused   input  active-high
        line  25:     "GPIO25"       unused   input  active-high
        line  26:     "GPIO26"       unused   input  active-high
        line  27:     "GPIO27"       unused   input  active-high
        line  28: "PCIE_RP1_WAKE" unused input active-high
        line  29:   "FAN_TACH"       unused   input  active-high
        line  30:   "HOST_SDA"       unused   input  active-high
        line  31:   "HOST_SCL"       unused   input  active-high
        line  32:  "ETH_RST_N"  "phy-reset"  output   active-low [used]
        line  33:          "-"       unused   input  active-high
        line  34: "CD0_IO0_MICCLK" "cam0_reg" output active-high [used]
        line  35: "CD0_IO0_MICDAT0" unused input active-high
        line  36: "RP1_PCIE_CLKREQ_N" unused input active-high
        line  37:          "-"       unused   input  active-high
        line  38:    "CD0_SDA"       unused   input  active-high
        line  39:    "CD0_SCL"       unused   input  active-high
        line  40:    "CD1_SDA"       unused   input  active-high
        line  41:    "CD1_SCL"       unused   input  active-high
        line  42: "USB_VBUS_EN" unused output active-high
        line  43:   "USB_OC_N"       unused   input  active-high
        line  44: "RP1_STAT_LED" "PWR" output active-low [used]
        line  45:    "FAN_PWM"       unused   input  active-high
        line  46: "CD1_IO0_MICCLK" "cam1_reg" output active-high [used]
        line  47:  "2712_WAKE"       unused   input  active-high
        line  48: "CD1_IO1_MICDAT1" unused input active-high
        line  49: "EN_MAX_USB_CUR" unused output active-high
        line  50:          "-"       unused   input  active-high
        line  51:          "-"       unused   input  active-high
        line  52:          "-"       unused   input  active-high
        line  53:          "-"       unused   input  active-high
gpiochip10 - 32 lines:
        line   0:          "-"       unused   input  active-high
        line   1: "2712_BOOT_CS_N" "spi10 CS0" output active-low [used]
        line   2: "2712_BOOT_MISO" unused input active-high
        line   3: "2712_BOOT_MOSI" unused input active-high
        line   4: "2712_BOOT_SCLK" unused input active-high
        line   5:          "-"       unused   input  active-high
        line   6:          "-"       unused   input  active-high
        line   7:          "-"       unused   input  active-high
        line   8:          "-"       unused   input  active-high
        line   9:          "-"       unused   input  active-high
        line  10:          "-"       unused   input  active-high
        line  11:          "-"       unused   input  active-high
        line  12:          "-"       unused   input  active-high
        line  13:          "-"       unused   input  active-high
        line  14:   "PCIE_SDA"       unused   input  active-high
        line  15:   "PCIE_SCL"       unused   input  active-high
        line  16:          "-"       unused   input  active-high
        line  17:          "-"       unused   input  active-high
        line  18:          "-"       unused   input  active-high
        line  19:          "-"       unused   input  active-high
        line  20:   "PWR_GPIO" "pwr_button"   input   active-low [used]
        line  21: "2712_G21_FS" unused input active-high
        line  22:          "-"       unused   input  active-high
        line  23:          "-"       unused   input  active-high
        line  24:     "BT_RTS"       unused   input  active-high
        line  25:     "BT_CTS"       unused   input  active-high
        line  26:     "BT_TXD"       unused   input  active-high
        line  27:     "BT_RXD"       unused   input  active-high
        line  28:      "WL_ON"  "wl_on_reg"  output  active-high [used]
        line  29:      "BT_ON"   "shutdown"  output  active-high [used]
        line  30: "WIFI_SDIO_CLK" unused input active-high
        line  31: "WIFI_SDIO_CMD" unused input active-high
gpiochip11 - 4 lines:
        line   0: "WIFI_SDIO_D0" unused input active-high
        line   1: "WIFI_SDIO_D1" unused input active-high
        line   2: "WIFI_SDIO_D2" unused input active-high
        line   3: "WIFI_SDIO_D3" unused input active-high
gpiochip12 - 17 lines:
        line   0:    "RP1_SDA"       unused   input  active-high
        line   1:    "RP1_SCL"       unused   input  active-high
        line   2:    "RP1_RUN" "RP1 RUN pin" output active-high [used]
        line   3: "SD_IOVDD_SEL" "vdd-sd-io" output active-high [used]
        line   4:  "SD_PWR_ON" "sd_vcc_reg"  output  active-high [used]
        line   5:  "SD_CDET_N"         "cd"   input   active-low [used]
        line   6:   "SD_FLG_N"       unused   input  active-high
        line   7:          "-"       unused   input  active-high
        line   8:  "2712_WAKE"       unused   input  active-high
        line   9: "2712_STAT_LED" "ACT" output active-low [used]
        line  10:          "-"       unused   input  active-high
        line  11:          "-"       unused   input  active-high
        line  12:   "PMIC_INT"       unused   input  active-high
        line  13: "UART_TX_FS"       unused   input  active-high
        line  14: "UART_RX_FS"       unused   input  active-high
        line  15:          "-"       unused   input  active-high
        line  16:          "-"       unused   input  active-high
gpiochip13 - 6 lines:
        line   0:  "HDMI0_SCL"       unused   input  active-high
        line   1:  "HDMI0_SDA"       unused   input  active-high
        line   2:  "HDMI1_SCL"       unused   input  active-high
        line   3:  "HDMI1_SDA"       unused   input  active-high
        line   4:   "PMIC_SCL"       unused   input  active-high
        line   5:   "PMIC_SDA"       unused   input  active-high
gpiochip14 - 7 lines:
        line   0:      unnamed       unused   input  active-high
        line   1:      unnamed       unused   input  active-high
        line   2:      unnamed       unused   input  active-high
        line   3:      unnamed       unused   input  active-high
        line   4:      unnamed       unused   input  active-high
        line   5:      unnamed       unused   input  active-high
        line   6:      unnamed       unused   input  active-high
gpiochip0 - 54 lines:
        line   0:     "ID_SDA"       unused   input  active-high
        line   1:     "ID_SCL"       unused   input  active-high
        line   2:      "GPIO2"       unused   input  active-high
        line   3:      "GPIO3"       unused   input  active-high
        line   4:      "GPIO4"       unused   input  active-high
        line   5:      "GPIO5"       unused   input  active-high
        line   6:      "GPIO6"       unused   input  active-high
        line   7:      "GPIO7"       unused   input  active-high
        line   8:      "GPIO8"       unused   input  active-high
        line   9:      "GPIO9"       unused   input  active-high
        line  10:     "GPIO10"       unused   input  active-high
        line  11:     "GPIO11"       unused   input  active-high
        line  12:     "GPIO12"       unused   input  active-high
        line  13:     "GPIO13"       unused   input  active-high
        line  14:     "GPIO14"       unused   input  active-high
        line  15:     "GPIO15"       unused   input  active-high
        line  16:     "GPIO16"       unused   input  active-high
        line  17:     "GPIO17" "opengpio_4_17_watch" input active-high [used]
        line  18:     "GPIO18"       unused   input  active-high
        line  19:     "GPIO19"       unused   input  active-high
        line  20:     "GPIO20"       unused   input  active-high
        line  21:     "GPIO21"       unused   input  active-high
        line  22:     "GPIO22" "opengpio_4_22_watch" input active-high [used]
        line  23:     "GPIO23"       unused   input  active-high
        line  24:     "GPIO24"       unused   input  active-high
        line  25:     "GPIO25"       unused   input  active-high
        line  26:     "GPIO26"       unused   input  active-high
        line  27:     "GPIO27"       unused   input  active-high
        line  28: "PCIE_RP1_WAKE" unused input active-high
        line  29:   "FAN_TACH"       unused   input  active-high
        line  30:   "HOST_SDA"       unused   input  active-high
        line  31:   "HOST_SCL"       unused   input  active-high
        line  32:  "ETH_RST_N"  "phy-reset"  output   active-low [used]
        line  33:          "-"       unused   input  active-high
        line  34: "CD0_IO0_MICCLK" "cam0_reg" output active-high [used]
        line  35: "CD0_IO0_MICDAT0" unused input active-high
        line  36: "RP1_PCIE_CLKREQ_N" unused input active-high
        line  37:          "-"       unused   input  active-high
        line  38:    "CD0_SDA"       unused   input  active-high
        line  39:    "CD0_SCL"       unused   input  active-high
        line  40:    "CD1_SDA"       unused   input  active-high
        line  41:    "CD1_SCL"       unused   input  active-high
        line  42: "USB_VBUS_EN" unused output active-high
        line  43:   "USB_OC_N"       unused   input  active-high
        line  44: "RP1_STAT_LED" "PWR" output active-low [used]
        line  45:    "FAN_PWM"       unused   input  active-high
        line  46: "CD1_IO0_MICCLK" "cam1_reg" output active-high [used]
        line  47:  "2712_WAKE"       unused   input  active-high
        line  48: "CD1_IO1_MICDAT1" unused input active-high
        line  49: "EN_MAX_USB_CUR" unused output active-high
        line  50:          "-"       unused   input  active-high
        line  51:          "-"       unused   input  active-high
        line  52:          "-"       unused   input  active-high
        line  53:          "-"       unused   input  active-high

Wenn ich Dich richtig verstehe, dann müsste doch auch gpiochip15 aufgeführt sein, oder...?

Laser

@searcher57 ich möchte jetzt mein halbwegs funktionierendes System nicht zerschießen. Was benötige ich , um die GPIO- Kommandos auszuführen? ZB. gpioinfo?

Homoran

@laser sagte in Test Adapter rpi2 2.x:

Was benötige ich , um die GPIO- Kommandos auszuführen? ZB. gpioinfo?

einen Raspi und ein Terminal

Laser

@homoran toller Tip!
gpioinfo
-bash: gpioinfo: command not found

Thomas Braun

@laser

Das Paket nennt sich

gpiod

Garfonso

@laser
kannst du da ein debug log geben?

Homoran

@thomas-braun sagte in Test Adapter rpi2 2.x:

@laser

Das Paket nennt sich

gpiod

dann hat @laser noch nicht den bookworm "patch"?
dann würde ich an seiner Stelle das Paket nicht installieren.

Laser

@homoran einen bookworm "patch" habe ich nicht wissentlich installiert.

searcher57

@laser said in Test Adapter rpi2 2.x:

@searcher57 ich möchte jetzt mein halbwegs funktionierendes System nicht zerschießen. Was benötige ich , um die GPIO- Kommandos auszuführen? ZB. gpioinfo?

Aber das war das doch, oder...)

Laser

@searcher57 die Antworten sind immer sehr kurz formuliert. Kann ich so nicht verstehen.

searcher57

@laser said in Test Adapter rpi2 2.x:

@searcher57 die Antworten sind immer sehr kurz formuliert. Kann ich so nicht verstehen.

Ich habe doch oben die Ausgabe von gpioinfo gegeben.

Laser

@searcher57 ja, aber ich kann den Befehl "gpioinfo" nicht ausführen. Den gibt es bei mir nicht.

Thomas Braun

@laser

sudo apt update && apt policy gpiod

searcher57

@laser said in Test Adapter rpi2 2.x:

@searcher57 ja, aber ich kann den Befehl "gpioinfo" nicht ausführen. Den gibt es bei mir nicht.

Ja und was brauchst Du dann?

Laser

@thomas-braun sagte in Test Adapter rpi2 2.x:

sudo apt update && apt policy gpiod

und das ist der bookworm- patch?
@searcher57 Das weiß ich eben nicht, was ich installieren muß, um den Befehl zu bekommen.

Thomas Braun

@laser

Das ist das Paket, welche das Kommando gpioinfo beinhaltet.

Laser

@thomas-braun habe ich ausgeführt, aber:
gpioinfo
-bash: gpioinfo: command not found

Thomas Braun

@laser sagte in Test Adapter rpi2 2.x:

habe ich ausgeführt,

Zeigen.

searcher57

@laser said in Test Adapter rpi2 2.x:

@thomas-braun habe ich ausgeführt, aber:
gpioinfo
-bash: gpioinfo: command not found

Na dann merke ic endlich, daß auch bei Euch Uneinigkeit besteht!

Laser

@thomas-braun

sudo apt update && apt policy gpiod
Hit:1 http://deb.debian.org/debian bookworm InRelease
Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease
Hit:3 http://deb.debian.org/debian bookworm-updates InRelease
Hit:4 http://archive.raspberrypi.com/debian bookworm InRelease
Hit:5 https://packages.grafana.com/enterprise/deb stable InRelease
Hit:6 https://repos.influxdata.com/debian stable InRelease
Hit:7 https://deb.nodesource.com/node_18.x nodistro InRelease
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
1 package can be upgraded. Run 'apt list --upgradable' to see it.
W: https://packages.grafana.com/enterprise/deb/dists/stable/InRelease: Key is stored in legacy trusted.gpg keyring (/etc/apt/trusted.gpg), see the DEPRECATION section in apt-key(8) for details.
gpiod:
  Installed: (none)
  Candidate: 1.6.3-1+b3
  Version table:
     1.6.3-1+b3 500
        500 http://deb.debian.org/debian bookworm/main arm64 Packages
otto@neuheizung:/dev $ gpioinfo
-bash: gpioinfo: command not found
otto@neuheizung:/dev $ gpioinfo
-bash: gpioinfo: command not found

NEWS

Test Adapter rpi2 2.x

Support us

872
Online

31.7k
Users

79.8k
Topics

1.3m
Posts

NEWS

Test Adapter rpi2 2.x

Support us

872Online

31.7kUsers

79.8kTopics

1.3mPosts

872
Online

31.7k
Users

79.8k
Topics

1.3m
Posts