Zeitplan startet nicht mehr
-
@homoran Kellerkind:
======== Start marking the full check here ========= Skript v.2024-05-22 *** BASE SYSTEM *** Static hostname: Kellerkind Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.6.31+rpt-rpi-v8 Architecture: arm64 Model : Raspberry Pi 4 Model B Rev 1.2 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 13:28:49 up 15 min, 4 users, load average: 0.15, 0.14, 0.13 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Tue 2024-09-03 13:28:50 BST Universal time: Tue 2024-09-03 12:28:50 UTC RTC time: n/a Time zone: Europe/London (BST, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': pi HOME=/home/pi GROUPS=pi adm dialout cdrom sudo audio video plugdev games users input render netdev lpadmin gpio i2c spi iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** Display-Server-Setup *** Display-Server: true Desktop: Terminal: tty Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 4.0G 518M 2.8G 17M 745M 3.5G Swap: 209M 0B 209M Total: 4.2G 518M 3.0G Active iob-Instances: 36 3792 M total memory 494 M used memory 646 M active memory 347 M inactive memory 2673 M free memory 41 M buffer memory 669 M swap cache 199 M total swap 0 M used swap 199 M free swap *** top - Table Of Processes *** top - 13:28:50 up 15 min, 4 users, load average: 0.30, 0.17, 0.14 Tasks: 218 total, 1 running, 217 sleeping, 0 stopped, 0 zombie %Cpu(s): 0.0 us, 0.0 sy, 0.0 ni, 83.3 id, 16.7 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 3792.1 total, 2673.3 free, 495.4 used, 711.4 buff/cache MiB Swap: 200.0 total, 200.0 free, 0.0 used. 3296.7 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 1.6G 0 1.6G 0% /dev tmpfs tmpfs 380M 1.4M 378M 1% /run /dev/mmcblk0p2 ext4 58G 6.1G 49G 11% / tmpfs tmpfs 1.9G 148K 1.9G 1% /dev/shm tmpfs tmpfs 5.0M 16K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 510M 75M 436M 15% /boot/firmware tmpfs tmpfs 380M 40K 380M 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Tue Sep 3 13:13:49 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=DC:A6:32:59:95:2E vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=e6691f19-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles cfg80211.ieee80211_regdom=DE [Tue Sep 3 13:13:52 2024] EXT4-fs (mmcblk0p2): mounted filesystem fc7a1f9e-4967-4f41-a1f5-1b5927e6c5f9 ro with ordered data mode. Quota mode: none. [Tue Sep 3 13:13:54 2024] EXT4-fs (mmcblk0p2): re-mounted fc7a1f9e-4967-4f41-a1f5-1b5927e6c5f9 r/w. Quota mode: none. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime,commit=600 |-/sys sysfs sysfs rw,nosuid,nodev,noexec,relatime | |-/sys/kernel/security securityfs securityfs rw,nosuid,nodev,noexec,relatime | |-/sys/fs/cgroup cgroup2 cgroup2 rw,nosuid,nodev,noexec,relatime,nsdelegate,memory_recursiveprot | |-/sys/fs/pstore pstore pstore rw,nosuid,nodev,noexec,relatime | |-/sys/fs/bpf bpf bpf rw,nosuid,nodev,noexec,relatime,mode=700 | |-/sys/kernel/debug debugfs debugfs rw,nosuid,nodev,noexec,relatime | |-/sys/kernel/tracing tracefs tracefs rw,nosuid,nodev,noexec,relatime | |-/sys/kernel/config configfs configfs rw,nosuid,nodev,noexec,relatime | `-/sys/fs/fuse/connections fusectl fusectl rw,nosuid,nodev,noexec,relatime |-/proc proc proc rw,relatime | `-/proc/sys/fs/binfmt_misc systemd-1 autofs rw,relatime,fd=29,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=2583 | `-/proc/sys/fs/binfmt_misc binfmt_misc binfmt_misc rw,nosuid,nodev,noexec,relatime |-/dev udev devtmpfs rw,nosuid,relatime,size=1668348k,nr_inodes=417087,mode=755 | |-/dev/pts devpts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 | |-/dev/shm tmpfs tmpfs rw,nosuid,nodev | `-/dev/mqueue mqueue mqueue rw,nosuid,nodev,noexec,relatime |-/run tmpfs tmpfs rw,nosuid,nodev,noexec,relatime,size=388308k,mode=755 | |-/run/lock tmpfs tmpfs rw,nosuid,nodev,noexec,relatime,size=5120k | |-/run/credentials/systemd-sysusers.service ramfs ramfs ro,nosuid,nodev,noexec,relatime,mode=700 | |-/run/credentials/systemd-sysctl.service ramfs ramfs ro,nosuid,nodev,noexec,relatime,mode=700 | |-/run/credentials/systemd-tmpfiles-setup-dev.service ramfs ramfs ro,nosuid,nodev,noexec,relatime,mode=700 | |-/run/rpc_pipefs sunrpc rpc_pipefs rw,relatime | |-/run/credentials/systemd-tmpfiles-setup.service ramfs ramfs ro,nosuid,nodev,noexec,relatime,mode=700 | `-/run/user/1000 tmpfs tmpfs rw,nosuid,nodev,relatime,size=388304k,nr_inodes=97076,mode=700,uid=1000,gid=1000 | |-/run/user/1000/gvfs gvfsd-fuse fuse.gvfsd-fuse rw,nosuid,nodev,relatime,user_id=1000,group_id=1000 | `-/run/user/1000/doc portal fuse.portal rw,nosuid,nodev,relatime,user_id=1000,group_id=1000 `-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 795M /var/ 207M /var/log 206M /var/log/journal/29e1cae54c5f42aba99c823242ab5946 206M /var/log/journal 198M /var/lib Archived and active journals take up 205.8M in the file system. /opt/iobroker/backups: 4.0K /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 15M /opt/iobroker/iobroker-data/files 15M /opt/iobroker/iobroker-data/ 13M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js 13M /opt/iobroker/iobroker-data/files/admin.admin/custom/static 13M /opt/iobroker/iobroker-data/files/admin.admin/custom The five largest files in iobroker-data are: 6.3M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js.map 2.8M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js 1.6M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_mui_material_Accordion_index_js-node_modules_mui_material_AccordionDetai-57e02d.0886b730.chunk.js.map 652K /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_mui_material_index_js.40e01f69.chunk.js.map 384K /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_mui_material_Accordion_index_js-node_modules_mui_material_AccordionDetai-57e02d.0886b730.chunk.js USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-Prolific_Technology_Inc._USB-Serial_Controller_D-if00-port0 *** NodeJS-Installation *** /usr/bin/nodejs v20.17.0 /usr/bin/node v20.17.0 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 /usr/bin/corepack 0.29.3 nodejs: Installed: 20.17.0-1nodesource1 Candidate: 20.17.0-1nodesource1 Version table: *** 20.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 20.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 18.19.0+dfsg-6~deb12u2 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages 18.19.0+dfsg-6~deb12u1 500 500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. At least one iobroker host is running. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 6.0.11 admin: 6.17.14 javascript: "javascript" not found nodejs modules from github: 0 Adapter State + system.adapter.admin.0 : admin : Homee - enabled, port: 7770, bind: 0.0.0.0, run as: admin + system.adapter.alpha-ess.0 : alpha-ess : Homee - enabled + system.adapter.backitup.0 : backitup : Homee - enabled system.adapter.coronavirus-statistics.0 : coronavirus-statistics: Homee - enabled system.adapter.daswetter.0 : daswetter : Homee - enabled system.adapter.devices.0 : devices : Homee - enabled + system.adapter.discovery.0 : discovery : Homee - enabled + system.adapter.ds18b20.1 : ds18b20 : Kellerkind - enabled + system.adapter.ds18b20.3 : ds18b20 : PapaHuette - enabled system.adapter.dwd.0 : dwd : Homee - enabled + system.adapter.ecovacs-deebot.0 : ecovacs-deebot : Homee - enabled + system.adapter.email.0 : email : Homee - enabled + system.adapter.growatt.0 : growatt : Homee - enabled + system.adapter.growatt.1 : growatt : Homee - enabled + system.adapter.homeconnect.0 : homeconnect : Homee - enabled system.adapter.ical.0 : ical : Homee - enabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : Homee - enabled + system.adapter.influxdb.0 : influxdb : Homee - enabled, port: 8086 + system.adapter.javascript.0 : javascript : Homee - enabled + system.adapter.modbus.0 : modbus : Homee - enabled + system.adapter.modbus.1 : modbus : Homee - enabled + system.adapter.mqtt.0 : mqtt : Homee - enabled, port: 1886, bind: 0.0.0.0 + system.adapter.nina.0 : nina : Homee - enabled system.adapter.pegelalarm.0 : pegelalarm : Homee - enabled system.adapter.pegelalarm.1 : pegelalarm : Homee - enabled + system.adapter.pollenflug.0 : pollenflug : Homee - enabled + system.adapter.rpi2.0 : rpi2 : Homee - enabled + system.adapter.rpi2.1 : rpi2 : Kellerkind - enabled + system.adapter.rpi2.2 : rpi2 : MotionEye - enabled + system.adapter.rpi2.3 : rpi2 : PapaHuette - enabled + system.adapter.rpi2.4 : rpi2 : Gartenklo - enabled + system.adapter.semp.0 : semp : Homee - enabled + system.adapter.smartmeter.0 : smartmeter : Homee - enabled + system.adapter.sonoff.0 : sonoff : Homee - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.systeminfo.0 : systeminfo : Homee - enabled + system.adapter.systeminfo.1 : systeminfo : Kellerkind - enabled + system.adapter.systeminfo.2 : systeminfo : MotionEye - enabled + system.adapter.systeminfo.3 : systeminfo : PapaHuette - enabled + system.adapter.systeminfo.4 : systeminfo : Gartenklo - enabled + system.adapter.tankerkoenig.0 : tankerkoenig : Homee - enabled system.adapter.vis-bars.0 : vis-bars : Homee - enabled system.adapter.vis-canvas-gauges.0 : vis-canvas-gauges : Homee - enabled system.adapter.vis-history.0 : vis-history : Homee - enabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : Homee - enabled system.adapter.vis-icontwo.0 : vis-icontwo : Homee - enabled + system.adapter.vis-inventwo.0 : vis-inventwo : Homee - enabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : Homee - enabled system.adapter.vis-justgage.0 : vis-justgage : Homee - enabled system.adapter.vis-metro.0 : vis-metro : Homee - enabled system.adapter.vis-plumb.0 : vis-plumb : Homee - enabled system.adapter.vis-rgraph.0 : vis-rgraph : Homee - enabled system.adapter.vis-timeandweather.0 : vis-timeandweather : Homee - enabled system.adapter.vis.0 : vis : Homee - enabled + system.adapter.web.0 : web : Homee - enabled, port: 7777, bind: 0.0.0.0, run as: admin + system.adapter.worx.2 : worx : PapaHuette - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : Homee - enabled, port: 7770, bind: 0.0.0.0, run as: admin + system.adapter.influxdb.0 : influxdb : Homee - enabled, port: 8086 + system.adapter.mqtt.0 : mqtt : Homee - enabled, port: 1886, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : Homee - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.web.0 : web : Homee - enabled, port: 7777, bind: 0.0.0.0, run as: admin ioBroker-Repositories ┌─────────┬────────────────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼────────────────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'Stable (default)' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'Beta (latest)' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴────────────────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): Stable (default) Upgrade policy: none Installed ioBroker-Instances Used repository: Stable (default) Adapter "admin" : 7.0.23 , installed 6.17.14 [Updatable] Adapter "backitup" : 3.0.19 , installed 2.11.0 [Updatable] Adapter "discovery" : 4.5.0 , installed 4.5.0 Adapter "ds18b20" : 2.0.5 , installed 2.0.5 Controller "js-controller": 6.0.11 , installed 6.0.11 Adapter "rpi2" : 1.3.2 , installed 2.0.0 Adapter "systeminfo" : 1.2.0 , installed 1.2.0 Objects and States Please stand by - This may take a while Objects: 13068 States: 13756 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian bookworm InRelease Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease Hit:3 http://deb.debian.org/debian bookworm-updates InRelease Hit:4 http://archive.raspberrypi.com/debian bookworm InRelease Hit:5 https://deb.nodesource.com/node_20.x nodistro InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 6789 789/sshd: /usr/sbin tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 9225 773/cupsd tcp6 0 0 :::22 :::* LISTEN 0 6791 789/sshd: /usr/sbin tcp6 0 0 ::1:631 :::* LISTEN 0 9224 773/cupsd udp 0 0 0.0.0.0:43551 0.0.0.0:* 104 3026 582/avahi-daemon: r udp 0 0 0.0.0.0:631 0.0.0.0:* 0 7037 1085/cups-browsed udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 3024 582/avahi-daemon: r udp6 0 0 fe80::59f1:774b:474:546 :::* 0 7101 704/NetworkManager udp6 0 0 fe80::e7c:a388:984::546 :::* 0 8434 704/NetworkManager udp6 0 0 :::41969 :::* 104 3027 582/avahi-daemon: r udp6 0 0 :::5353 :::* 104 3025 582/avahi-daemon: r *** Log File - Last 25 Lines *** 2024-09-03 13:25:22.644 - warn: ds18b20.1 (1975) Error reading sensor 28-01144f959aaa: Error: ENOENT: no such file or directory, open '/sys/bus/w1/devices/28-01144f959aaa/w1_slave' 2024-09-03 13:25:23.522 - warn: ds18b20.1 (1975) Error reading sensor 28-01144fc984aa: Error: ENOENT: no such file or directory, open '/sys/bus/w1/devices/28-01144fc984aa/w1_slave' 2024-09-03 13:25:23.524 - warn: ds18b20.1 (1975) Error reading sensor 28-0316a2793d5d: Error: ENOENT: no such file or directory, open '/sys/bus/w1/devices/28-0316a2793d5d/w1_slave' 2024-09-03 13:25:23.527 - warn: ds18b20.1 (1975) Error reading sensor 28-0316a279ee0c: Error: ENOENT: no such file or directory, open '/sys/bus/w1/devices/28-0316a279ee0c/w1_slave' 2024-09-03 13:25:23.529 - warn: ds18b20.1 (1975) Error reading sensor 28-0120506f240b: Error: ENOENT: no such file or directory, open '/sys/bus/w1/devices/28-0120506f240b/w1_slave' 2024-09-03 13:26:22.642 - warn: ds18b20.1 (1975) Error reading sensor 28-01144f959aaa: Error: ENOENT: no such file or directory, open '/sys/bus/w1/devices/28-01144f959aaa/w1_slave' 2024-09-03 13:26:23.522 - warn: ds18b20.1 (1975) Error reading sensor 28-01144fc984aa: Error: ENOENT: no such file or directory, open '/sys/bus/w1/devices/28-01144fc984aa/w1_slave' 2024-09-03 13:26:23.525 - warn: ds18b20.1 (1975) Error reading sensor 28-0316a2793d5d: Error: ENOENT: no such file or directory, open '/sys/bus/w1/devices/28-0316a2793d5d/w1_slave' 2024-09-03 13:26:23.526 - warn: ds18b20.1 (1975) Error reading sensor 28-0316a279ee0c: Error: ENOENT: no such file or directory, open '/sys/bus/w1/devices/28-0316a279ee0c/w1_slave' 2024-09-03 13:26:23.528 - warn: ds18b20.1 (1975) Error reading sensor 28-0120506f240b: Error: ENOENT: no such file or directory, open '/sys/bus/w1/devices/28-0120506f240b/w1_slave' 2024-09-03 13:27:22.643 - warn: ds18b20.1 (1975) Error reading sensor 28-01144f959aaa: Error: ENOENT: no such file or directory, open '/sys/bus/w1/devices/28-01144f959aaa/w1_slave' 2024-09-03 13:27:23.522 - warn: ds18b20.1 (1975) Error reading sensor 28-01144fc984aa: Error: ENOENT: no such file or directory, open '/sys/bus/w1/devices/28-01144fc984aa/w1_slave' 2024-09-03 13:27:23.523 - warn: ds18b20.1 (1975) Error reading sensor 28-0316a2793d5d: Error: ENOENT: no such file or directory, open '/sys/bus/w1/devices/28-0316a2793d5d/w1_slave' 2024-09-03 13:27:23.525 - warn: ds18b20.1 (1975) Error reading sensor 28-0316a279ee0c: Error: ENOENT: no such file or directory, open '/sys/bus/w1/devices/28-0316a279ee0c/w1_slave' 2024-09-03 13:27:23.526 - warn: ds18b20.1 (1975) Error reading sensor 28-0120506f240b: Error: ENOENT: no such file or directory, open '/sys/bus/w1/devices/28-0120506f240b/w1_slave' 2024-09-03 13:28:22.643 - warn: ds18b20.1 (1975) Error reading sensor 28-01144f959aaa: Error: ENOENT: no such file or directory, open '/sys/bus/w1/devices/28-01144f959aaa/w1_slave' 2024-09-03 13:28:23.526 - warn: ds18b20.1 (1975) Error reading sensor 28-01144fc984aa: Error: ENOENT: no such file or directory, open '/sys/bus/w1/devices/28-01144fc984aa/w1_slave' 2024-09-03 13:28:23.528 - warn: ds18b20.1 (1975) Error reading sensor 28-0316a2793d5d: Error: ENOENT: no such file or directory, open '/sys/bus/w1/devices/28-0316a2793d5d/w1_slave' 2024-09-03 13:28:23.529 - warn: ds18b20.1 (1975) Error reading sensor 28-0316a279ee0c: Error: ENOENT: no such file or directory, open '/sys/bus/w1/devices/28-0316a279ee0c/w1_slave' 2024-09-03 13:28:23.530 - warn: ds18b20.1 (1975) Error reading sensor 28-0120506f240b: Error: ENOENT: no such file or directory, open '/sys/bus/w1/devices/28-0120506f240b/w1_slave' 2024-09-03 13:29:22.643 - warn: ds18b20.1 (1975) Error reading sensor 28-01144f959aaa: Error: ENOENT: no such file or directory, open '/sys/bus/w1/devices/28-01144f959aaa/w1_slave' 2024-09-03 13:29:23.526 - warn: ds18b20.1 (1975) Error reading sensor 28-01144fc984aa: Error: ENOENT: no such file or directory, open '/sys/bus/w1/devices/28-01144fc984aa/w1_slave' 2024-09-03 13:29:23.528 - warn: ds18b20.1 (1975) Error reading sensor 28-0316a2793d5d: Error: ENOENT: no such file or directory, open '/sys/bus/w1/devices/28-0316a2793d5d/w1_slave' 2024-09-03 13:29:23.529 - warn: ds18b20.1 (1975) Error reading sensor 28-0316a279ee0c: Error: ENOENT: no such file or directory, open '/sys/bus/w1/devices/28-0316a279ee0c/w1_slave' 2024-09-03 13:29:23.530 - warn: ds18b20.1 (1975) Error reading sensor 28-0120506f240b: Error: ENOENT: no such file or directory, open '/sys/bus/w1/devices/28-0120506f240b/w1_slave' ============ Mark until here for C&P ============= iob diag has finished. -
@homoran PapaHuette:
======== Start marking the full check here ========= Skript v.2024-05-22 *** BASE SYSTEM *** Static hostname: PapaHuette Icon name: computer Operating System: Debian GNU/Linux 11 (bullseye) Kernel: Linux 6.1.21-v8+ Architecture: arm64 Model : Raspberry Pi 4 Model B Rev 1.4 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 14:28:47 up 18 min, 1 user, load average: 0.34, 0.11, 0.05 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Tue 2024-09-03 14:28:48 CEST Universal time: Tue 2024-09-03 12:28:48 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': pi HOME=/home/pi GROUPS=pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** Display-Server-Setup *** Display-Server: false Desktop: Terminal: tty Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 7.8G 291M 7.3G 0.0K 225M 7.4G Swap: 99M 0B 99M Total: 7.9G 291M 7.4G Active iob-Instances: 36 7812 M total memory 291 M used memory 354 M active memory 68 M inactive memory 7294 M free memory 32 M buffer memory 193 M swap cache 99 M total swap 0 M used swap 99 M free swap *** top - Table Of Processes *** top - 14:28:48 up 18 min, 1 user, load average: 0.34, 0.11, 0.05 Tasks: 159 total, 1 running, 158 sleeping, 0 stopped, 0 zombie %Cpu(s): 1.5 us, 1.5 sy, 0.0 ni, 97.1 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 7812.3 total, 7294.9 free, 291.2 used, 226.3 buff/cache MiB Swap: 100.0 total, 100.0 free, 0.0 used. 7408.3 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 15G 4.0G 9.6G 30% / devtmpfs devtmpfs 3.6G 0 3.6G 0% /dev tmpfs tmpfs 3.9G 0 3.9G 0% /dev/shm tmpfs tmpfs 1.6G 832K 1.6G 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 253M 31M 222M 13% /boot tmpfs tmpfs 782M 0 782M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Tue Sep 3 14:10:20 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=DC:A6:32:E2:9D:54 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=a622e112-02 rootfstype=ext4 fsck.repair=yes rootwait [Tue Sep 3 14:10:21 2024] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Tue Sep 3 14:10:21 2024] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Tue Sep 3 14:10:23 2024] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime |-/dev devtmpfs devtmpfs rw,relatime,size=3735680k,nr_inodes=933920,mode=755 | |-/dev/shm tmpfs tmpfs rw,nosuid,nodev | |-/dev/pts devpts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 | `-/dev/mqueue mqueue mqueue rw,nosuid,nodev,noexec,relatime |-/proc proc proc rw,relatime | `-/proc/sys/fs/binfmt_misc systemd-1 autofs rw,relatime,fd=30,pgrp=1,timeout=0,minproto=5,maxproto=5,direct |-/sys sysfs sysfs rw,nosuid,nodev,noexec,relatime | |-/sys/kernel/security securityfs securityfs rw,nosuid,nodev,noexec,relatime | |-/sys/fs/cgroup cgroup2 cgroup2 rw,nosuid,nodev,noexec,relatime,nsdelegate,memory_recursiveprot | |-/sys/fs/pstore pstore pstore rw,nosuid,nodev,noexec,relatime | |-/sys/fs/bpf bpf bpf rw,nosuid,nodev,noexec,relatime,mode=700 | |-/sys/kernel/debug debugfs debugfs rw,nosuid,nodev,noexec,relatime | |-/sys/kernel/tracing tracefs tracefs rw,nosuid,nodev,noexec,relatime | |-/sys/fs/fuse/connections fusectl fusectl rw,nosuid,nodev,noexec,relatime | `-/sys/kernel/config configfs configfs rw,nosuid,nodev,noexec,relatime |-/run tmpfs tmpfs rw,nosuid,nodev,size=1599964k,nr_inodes=819200,mode=755 | |-/run/lock tmpfs tmpfs rw,nosuid,nodev,noexec,relatime,size=5120k | |-/run/rpc_pipefs sunrpc rpc_pipefs rw,relatime | `-/run/user/1000 tmpfs tmpfs rw,nosuid,nodev,relatime,size=799980k,nr_inodes=199995,mode=700,uid=1000,gid=1000 `-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,flush,errors=remount-ro Files in neuralgic directories: /var: 1.8G /var/ 1.2G /var/log/journal/a72fb28f007b470eaff3aacdf7e11b84 1.2G /var/log/journal 1.2G /var/log 287M /var/cache Archived and active journals take up 1.1G in the file system. /opt/iobroker/backups: 4.0K /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 1.4M /opt/iobroker/iobroker-data/ 1.1M /opt/iobroker/iobroker-data/files 472K /opt/iobroker/iobroker-data/files/discovery.admin 384K /opt/iobroker/iobroker-data/files/backitup.admin 252K /opt/iobroker/iobroker-data/files/admin.admin The five largest files in iobroker-data are: 200K /opt/iobroker/iobroker-data/files/discovery.admin/words.js 148K /opt/iobroker/iobroker-data/files/backitup.admin/words.js 136K /opt/iobroker/iobroker-data/objects.jsonl 120K /opt/iobroker/iobroker-data/files/discovery.admin/index_m.html 108K /opt/iobroker/iobroker-data/files/discovery.admin/index.html USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** NodeJS-Installation *** /usr/bin/nodejs v20.17.0 /usr/bin/node v20.17.0 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 /usr/bin/corepack 0.29.3 nodejs: Installed: 20.17.0-1nodesource1 Candidate: 20.17.0-1nodesource1 Version table: *** 20.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 20.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 12.22.12~dfsg-1~deb11u4 500 500 http://deb.debian.org/debian bullseye/main arm64 Packages 500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. At least one iobroker host is running. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 6.0.11 admin: 6.13.16 javascript: "javascript" not found nodejs modules from github: 0 Adapter State + system.adapter.admin.0 : admin : Homee - enabled, port: 7770, bind: 0.0.0.0, run as: admin + system.adapter.alpha-ess.0 : alpha-ess : Homee - enabled + system.adapter.backitup.0 : backitup : Homee - enabled system.adapter.coronavirus-statistics.0 : coronavirus-statistics: Homee - enabled system.adapter.daswetter.0 : daswetter : Homee - enabled system.adapter.devices.0 : devices : Homee - enabled + system.adapter.discovery.0 : discovery : Homee - enabled + system.adapter.ds18b20.1 : ds18b20 : Kellerkind - enabled + system.adapter.ds18b20.3 : ds18b20 : PapaHuette - enabled system.adapter.dwd.0 : dwd : Homee - enabled + system.adapter.ecovacs-deebot.0 : ecovacs-deebot : Homee - enabled + system.adapter.email.0 : email : Homee - enabled + system.adapter.growatt.0 : growatt : Homee - enabled + system.adapter.growatt.1 : growatt : Homee - enabled + system.adapter.homeconnect.0 : homeconnect : Homee - enabled system.adapter.ical.0 : ical : Homee - enabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : Homee - enabled + system.adapter.influxdb.0 : influxdb : Homee - enabled, port: 8086 + system.adapter.javascript.0 : javascript : Homee - enabled + system.adapter.modbus.0 : modbus : Homee - enabled + system.adapter.modbus.1 : modbus : Homee - enabled + system.adapter.mqtt.0 : mqtt : Homee - enabled, port: 1886, bind: 0.0.0.0 + system.adapter.nina.0 : nina : Homee - enabled system.adapter.pegelalarm.0 : pegelalarm : Homee - enabled system.adapter.pegelalarm.1 : pegelalarm : Homee - enabled + system.adapter.pollenflug.0 : pollenflug : Homee - enabled + system.adapter.rpi2.0 : rpi2 : Homee - enabled + system.adapter.rpi2.1 : rpi2 : Kellerkind - enabled + system.adapter.rpi2.2 : rpi2 : MotionEye - enabled + system.adapter.rpi2.3 : rpi2 : PapaHuette - enabled + system.adapter.rpi2.4 : rpi2 : Gartenklo - enabled + system.adapter.semp.0 : semp : Homee - enabled + system.adapter.smartmeter.0 : smartmeter : Homee - enabled + system.adapter.sonoff.0 : sonoff : Homee - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.systeminfo.0 : systeminfo : Homee - enabled + system.adapter.systeminfo.1 : systeminfo : Kellerkind - enabled + system.adapter.systeminfo.2 : systeminfo : MotionEye - enabled + system.adapter.systeminfo.3 : systeminfo : PapaHuette - enabled + system.adapter.systeminfo.4 : systeminfo : Gartenklo - enabled + system.adapter.tankerkoenig.0 : tankerkoenig : Homee - enabled system.adapter.vis-bars.0 : vis-bars : Homee - enabled system.adapter.vis-canvas-gauges.0 : vis-canvas-gauges : Homee - enabled system.adapter.vis-history.0 : vis-history : Homee - enabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : Homee - enabled system.adapter.vis-icontwo.0 : vis-icontwo : Homee - enabled + system.adapter.vis-inventwo.0 : vis-inventwo : Homee - enabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : Homee - enabled system.adapter.vis-justgage.0 : vis-justgage : Homee - enabled system.adapter.vis-metro.0 : vis-metro : Homee - enabled system.adapter.vis-plumb.0 : vis-plumb : Homee - enabled system.adapter.vis-rgraph.0 : vis-rgraph : Homee - enabled system.adapter.vis-timeandweather.0 : vis-timeandweather : Homee - enabled system.adapter.vis.0 : vis : Homee - enabled + system.adapter.web.0 : web : Homee - enabled, port: 7777, bind: 0.0.0.0, run as: admin + system.adapter.worx.2 : worx : PapaHuette - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : Homee - enabled, port: 7770, bind: 0.0.0.0, run as: admin + system.adapter.influxdb.0 : influxdb : Homee - enabled, port: 8086 + system.adapter.mqtt.0 : mqtt : Homee - enabled, port: 1886, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : Homee - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.web.0 : web : Homee - enabled, port: 7777, bind: 0.0.0.0, run as: admin ioBroker-Repositories ┌─────────┬────────────────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼────────────────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'Stable (default)' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'Beta (latest)' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴────────────────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): Stable (default) Upgrade policy: none Installed ioBroker-Instances Used repository: Stable (default) Adapter "admin" : 7.0.23 , installed 6.13.16 [Updatable] Adapter "backitup" : 3.0.19 , installed 2.8.1 [Updatable] Adapter "discovery" : 4.5.0 , installed 3.1.0 [Updatable] Adapter "ds18b20" : 2.0.5 , installed 2.0.4 [Updatable] Controller "js-controller": 6.0.11 , installed 6.0.11 Adapter "rpi2" : 1.3.2 , installed 1.3.2 Adapter "systeminfo" : 1.2.0 , installed 1.1.0 [Updatable] Adapter "worx" : 3.0.2 , installed 2.3.2 [Updatable] Objects and States Please stand by - This may take a while Objects: 13068 States: 13756 *** OS-Repositories and Updates *** Hit:1 http://security.debian.org/debian-security bullseye-security InRelease Hit:2 http://deb.debian.org/debian bullseye InRelease Hit:3 http://deb.debian.org/debian bullseye-updates InRelease Hit:4 http://archive.raspberrypi.org/debian bullseye InRelease Hit:5 https://deb.nodesource.com/node_20.x nodistro InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 12683 534/sshd: /usr/sbin tcp6 0 0 :::22 :::* LISTEN 0 12685 534/sshd: /usr/sbin udp 0 0 0.0.0.0:68 0.0.0.0:* 0 14244 720/dhcpcd udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 1611 399/avahi-daemon: r udp 0 0 0.0.0.0:38158 0.0.0.0:* 108 1613 399/avahi-daemon: r udp6 0 0 :::546 :::* 0 1795 720/dhcpcd udp6 0 0 :::50365 :::* 108 1614 399/avahi-daemon: r udp6 0 0 :::5353 :::* 108 1612 399/avahi-daemon: r *** Log File - Last 25 Lines *** 2024-09-03 14:11:23.659 - warn: systeminfo.3 (1008) Error TypeError: Cannot read properties of null (reading 'toString') in doPoll for System.Led_Red 2024-09-03 14:11:24.159 - info: host.PapaHuette instance system.adapter.worx.2 in version "2.3.2" started with pid 1028 2024-09-03 14:11:24.343 - warn: systeminfo.3 (1008) Error TypeError: Cannot read properties of null (reading 'toString') in doPoll for HP_Photosmart_7520.[name/value] 2024-09-03 14:11:27.814 - warn: systeminfo.3 (1008) Unhandled error in main: TypeError: Cannot read private member #objects from an object whose class did not declare it 2024-09-03 14:11:27.873 - info: worx.2 (1028) starting. Version 2.3.2 in /opt/iobroker/node_modules/iobroker.worx, node: v20.17.0, js-controller: 6.0.11 2024-09-03 14:11:27.899 - info: worx.2 (1028) Login to worx 2024-09-03 14:11:29.095 - info: worx.2 (1028) Connected to worx server 2024-09-03 14:11:29.275 - info: worx.2 (1028) Found 1 devices 2024-09-03 14:11:29.276 - info: worx.2 (1028) Found device EVA with id 2019A0000005000140DB 2024-09-03 14:11:29.515 - warn: worx.2 (1028) INFORMATION - Change common: worx.2.2019A0000005000140DB.mower.wifiQuality 2024-09-03 14:11:29.591 - warn: worx.2 (1028) INFORMATION - Change common: worx.2.2019A0000005000140DB.mower.batteryState 2024-09-03 14:11:29.604 - warn: worx.2 (1028) INFORMATION - Change common: worx.2.2019A0000005000140DB.mower.batteryTemperature 2024-09-03 14:11:29.619 - warn: worx.2 (1028) INFORMATION - Change common: worx.2.2019A0000005000140DB.mower.batteryVoltage 2024-09-03 14:11:29.656 - info: worx.2 (1028) Multi-ZoneKeeper found! Create State : zoneKeeper 2024-09-03 14:11:30.014 - info: worx.2 (1028) DoubleShedule found, create states... 2024-09-03 14:11:30.131 - info: worx.2 (1028) OneTimeShedule found, create states... 2024-09-03 14:11:30.140 - info: worx.2 (1028) Firmware found, create states... 2024-09-03 14:11:30.432 - info: worx.2 (1028) Create folder activityLog and set states. 2024-09-03 14:11:30.711 - info: worx.2 (1028) Create product folder and states for WR141E 2024-09-03 14:11:31.412 - info: worx.2 (1028) Torque control found, create states... 2024-09-03 14:11:31.461 - info: worx.2 (1028) Autolock found! Create State : AutoLock 2024-09-03 14:11:31.507 - info: worx.2 (1028) Autolock found! Create State : AutoLockTimer 2024-09-03 14:11:31.655 - info: worx.2 (1028) Start MQTT connection 2024-09-03 14:11:32.140 - info: worx.2 (1028) MQTT connected to: iot.eu-west-1.worxlandroid.com 2024-09-03 14:11:32.221 - info: worx.2 (1028) Request Counter: 1 ============ Mark until here for C&P ============= iob diag has finished. -
@homoran MptionPi
======== Start marking the full check here ========= Skript v.2024-05-22 *** BASE SYSTEM *** Static hostname: MotionEye Icon name: computer Operating System: Debian GNU/Linux 11 (bullseye) Kernel: Linux 6.1.21-v8+ Architecture: arm64 Model : Raspberry Pi 4 Model B Rev 1.4 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 14:28:52 up 18 min, 2 users, load average: 0.58, 0.43, 0.30 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Tue 2024-09-03 14:28:52 CEST Universal time: Tue 2024-09-03 12:28:52 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': pi HOME=/home/pi GROUPS=pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** Display-Server-Setup *** Display-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 7.8G 430M 7.1G 0.0K 270M 7.3G Swap: 99M 0B 99M Total: 7.9G 430M 7.2G Active iob-Instances: 36 7812 M total memory 430 M used memory 532 M active memory 75 M inactive memory 7110 M free memory 32 M buffer memory 238 M swap cache 99 M total swap 0 M used swap 99 M free swap *** top - Table Of Processes *** top - 14:28:52 up 18 min, 2 users, load average: 0.58, 0.43, 0.30 Tasks: 157 total, 1 running, 156 sleeping, 0 stopped, 0 zombie %Cpu(s): 1.5 us, 2.9 sy, 0.0 ni, 95.6 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 7812.3 total, 7110.5 free, 430.6 used, 271.2 buff/cache MiB Swap: 100.0 total, 100.0 free, 0.0 used. 7268.0 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 29G 13G 15G 47% / devtmpfs devtmpfs 3.6G 0 3.6G 0% /dev tmpfs tmpfs 3.9G 16K 3.9G 1% /dev/shm tmpfs tmpfs 1.6G 836K 1.6G 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 253M 31M 222M 13% /boot tmpfs tmpfs 782M 0 782M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Tue Sep 3 14:10:40 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=DC:A6:32:E2:94:B6 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=e1cec37a-02 rootfstype=ext4 fsck.repair=yes rootwait [Tue Sep 3 14:10:41 2024] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Tue Sep 3 14:10:41 2024] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Tue Sep 3 14:10:44 2024] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime |-/dev devtmpfs devtmpfs rw,relatime,size=3735680k,nr_inodes=933920,mode=755 | |-/dev/shm tmpfs tmpfs rw,nosuid,nodev | |-/dev/pts devpts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 | `-/dev/mqueue mqueue mqueue rw,nosuid,nodev,noexec,relatime |-/proc proc proc rw,relatime | `-/proc/sys/fs/binfmt_misc systemd-1 autofs rw,relatime,fd=30,pgrp=1,timeout=0,minproto=5,maxproto=5,direct |-/sys sysfs sysfs rw,nosuid,nodev,noexec,relatime | |-/sys/kernel/security securityfs securityfs rw,nosuid,nodev,noexec,relatime | |-/sys/fs/cgroup cgroup2 cgroup2 rw,nosuid,nodev,noexec,relatime,nsdelegate,memory_recursiveprot | |-/sys/fs/pstore pstore pstore rw,nosuid,nodev,noexec,relatime | |-/sys/fs/bpf bpf bpf rw,nosuid,nodev,noexec,relatime,mode=700 | |-/sys/kernel/tracing tracefs tracefs rw,nosuid,nodev,noexec,relatime | |-/sys/kernel/debug debugfs debugfs rw,nosuid,nodev,noexec,relatime | |-/sys/kernel/config configfs configfs rw,nosuid,nodev,noexec,relatime | `-/sys/fs/fuse/connections fusectl fusectl rw,nosuid,nodev,noexec,relatime |-/run tmpfs tmpfs rw,nosuid,nodev,size=1599964k,nr_inodes=819200,mode=755 | |-/run/lock tmpfs tmpfs rw,nosuid,nodev,noexec,relatime,size=5120k | |-/run/rpc_pipefs sunrpc rpc_pipefs rw,relatime | `-/run/user/1000 tmpfs tmpfs rw,nosuid,nodev,relatime,size=799980k,nr_inodes=199995,mode=700,uid=1000,gid=1000 `-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,flush,errors=remount-ro Files in neuralgic directories: /var: 3.6G /var/ 3.0G /var/log 2.9G /var/log/journal/f844222954834511854453c716d9071c 2.9G /var/log/journal 393M /var/cache Archived and active journals take up 2.8G in the file system. /opt/iobroker/backups: 4.0K /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 4.1M /opt/iobroker/iobroker-data/ 1.2M /opt/iobroker/iobroker-data/files 472K /opt/iobroker/iobroker-data/files/discovery.admin 420K /opt/iobroker/iobroker-data/files/backitup.admin 252K /opt/iobroker/iobroker-data/files/admin.admin The five largest files in iobroker-data are: 2.7M /opt/iobroker/iobroker-data/objects.jsonl 276K /opt/iobroker/iobroker-data/states.jsonl 200K /opt/iobroker/iobroker-data/files/discovery.admin/words.js 164K /opt/iobroker/iobroker-data/files/backitup.admin/words.js 120K /opt/iobroker/iobroker-data/files/discovery.admin/index_m.html USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** NodeJS-Installation *** /usr/bin/nodejs v20.17.0 /usr/bin/node v20.17.0 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 /usr/bin/corepack 0.29.3 nodejs: Installed: 20.17.0-1nodesource1 Candidate: 20.17.0-1nodesource1 Version table: *** 20.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 20.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 12.22.12~dfsg-1~deb11u4 500 500 http://deb.debian.org/debian bullseye/main arm64 Packages 500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. At least one iobroker host is running. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 6.0.11 admin: 6.13.16 javascript: "javascript" not found nodejs modules from github: 0 Adapter State + system.adapter.admin.0 : admin : Homee - enabled, port: 7770, bind: 0.0.0.0, run as: admin + system.adapter.alpha-ess.0 : alpha-ess : Homee - enabled + system.adapter.backitup.0 : backitup : Homee - enabled system.adapter.coronavirus-statistics.0 : coronavirus-statistics: Homee - enabled system.adapter.daswetter.0 : daswetter : Homee - enabled system.adapter.devices.0 : devices : Homee - enabled + system.adapter.discovery.0 : discovery : Homee - enabled + system.adapter.ds18b20.1 : ds18b20 : Kellerkind - enabled + system.adapter.ds18b20.3 : ds18b20 : PapaHuette - enabled system.adapter.dwd.0 : dwd : Homee - enabled + system.adapter.ecovacs-deebot.0 : ecovacs-deebot : Homee - enabled + system.adapter.email.0 : email : Homee - enabled + system.adapter.growatt.0 : growatt : Homee - enabled + system.adapter.growatt.1 : growatt : Homee - enabled + system.adapter.homeconnect.0 : homeconnect : Homee - enabled system.adapter.ical.0 : ical : Homee - enabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : Homee - enabled + system.adapter.influxdb.0 : influxdb : Homee - enabled, port: 8086 + system.adapter.javascript.0 : javascript : Homee - enabled + system.adapter.modbus.0 : modbus : Homee - enabled + system.adapter.modbus.1 : modbus : Homee - enabled + system.adapter.mqtt.0 : mqtt : Homee - enabled, port: 1886, bind: 0.0.0.0 + system.adapter.nina.0 : nina : Homee - enabled system.adapter.pegelalarm.0 : pegelalarm : Homee - enabled system.adapter.pegelalarm.1 : pegelalarm : Homee - enabled + system.adapter.pollenflug.0 : pollenflug : Homee - enabled + system.adapter.rpi2.0 : rpi2 : Homee - enabled + system.adapter.rpi2.1 : rpi2 : Kellerkind - enabled + system.adapter.rpi2.2 : rpi2 : MotionEye - enabled + system.adapter.rpi2.3 : rpi2 : PapaHuette - enabled + system.adapter.rpi2.4 : rpi2 : Gartenklo - enabled + system.adapter.semp.0 : semp : Homee - enabled + system.adapter.smartmeter.0 : smartmeter : Homee - enabled + system.adapter.sonoff.0 : sonoff : Homee - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.systeminfo.0 : systeminfo : Homee - enabled + system.adapter.systeminfo.1 : systeminfo : Kellerkind - enabled + system.adapter.systeminfo.2 : systeminfo : MotionEye - enabled + system.adapter.systeminfo.3 : systeminfo : PapaHuette - enabled + system.adapter.systeminfo.4 : systeminfo : Gartenklo - enabled + system.adapter.tankerkoenig.0 : tankerkoenig : Homee - enabled system.adapter.vis-bars.0 : vis-bars : Homee - enabled system.adapter.vis-canvas-gauges.0 : vis-canvas-gauges : Homee - enabled system.adapter.vis-history.0 : vis-history : Homee - enabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : Homee - enabled system.adapter.vis-icontwo.0 : vis-icontwo : Homee - enabled + system.adapter.vis-inventwo.0 : vis-inventwo : Homee - enabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : Homee - enabled system.adapter.vis-justgage.0 : vis-justgage : Homee - enabled system.adapter.vis-metro.0 : vis-metro : Homee - enabled system.adapter.vis-plumb.0 : vis-plumb : Homee - enabled system.adapter.vis-rgraph.0 : vis-rgraph : Homee - enabled system.adapter.vis-timeandweather.0 : vis-timeandweather : Homee - enabled system.adapter.vis.0 : vis : Homee - enabled + system.adapter.web.0 : web : Homee - enabled, port: 7777, bind: 0.0.0.0, run as: admin + system.adapter.worx.2 : worx : PapaHuette - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : Homee - enabled, port: 7770, bind: 0.0.0.0, run as: admin + system.adapter.influxdb.0 : influxdb : Homee - enabled, port: 8086 + system.adapter.mqtt.0 : mqtt : Homee - enabled, port: 1886, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : Homee - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.web.0 : web : Homee - enabled, port: 7777, bind: 0.0.0.0, run as: admin ioBroker-Repositories ┌─────────┬────────────────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼────────────────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'Stable (default)' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'Beta (latest)' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴────────────────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): Stable (default) Upgrade policy: none Installed ioBroker-Instances Used repository: Stable (default) Adapter "admin" : 7.0.23 , installed 6.13.16 [Updatable] Adapter "backitup" : 3.0.19 , installed 2.8.1 [Updatable] Adapter "discovery" : 4.5.0 , installed 3.1.0 [Updatable] Controller "js-controller": 6.0.11 , installed 6.0.11 Adapter "rpi2" : 1.3.2 , installed 1.3.2 Adapter "systeminfo" : 1.2.0 , installed 1.1.0 [Updatable] Objects and States Please stand by - This may take a while Objects: 13068 States: 13756 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian bullseye InRelease Hit:2 http://deb.debian.org/debian bullseye-updates InRelease Hit:3 http://security.debian.org/debian-security bullseye-security InRelease Hit:4 http://archive.raspberrypi.org/debian bullseye InRelease Hit:5 https://deb.nodesource.com/node_20.x nodistro InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:8082 0.0.0.0:* LISTEN 0 10959 556/motion tcp 0 0 0.0.0.0:8081 0.0.0.0:* LISTEN 0 10958 556/motion tcp 0 0 127.0.0.1:7999 0.0.0.0:* LISTEN 0 10960 556/motion tcp 0 0 0.0.0.0:8765 0.0.0.0:* LISTEN 0 14534 401/python2 tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 14441 515/sshd: /usr/sbin tcp6 0 0 :::22 :::* LISTEN 0 14443 515/sshd: /usr/sbin udp 0 0 0.0.0.0:36850 0.0.0.0:* 108 10908 389/avahi-daemon: r udp 0 0 0.0.0.0:68 0.0.0.0:* 0 14225 753/dhcpcd udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 10906 389/avahi-daemon: r udp6 0 0 :::546 :::* 0 14252 753/dhcpcd udp6 0 0 :::5353 :::* 108 10907 389/avahi-daemon: r udp6 0 0 :::34901 :::* 108 10909 389/avahi-daemon: r *** Log File - Last 25 Lines *** 2024-09-03 14:10:10.107 - info: host.MotionEye stopInstance system.adapter.systeminfo.2 send kill signal 2024-09-03 14:10:10.164 - info: host.MotionEye force terminating 2024-09-03 14:10:23.263 - info: host.MotionEye iobroker.js-controller version 6.0.11 js-controller starting 2024-09-03 14:10:23.269 - info: host.MotionEye Copyright (c) 2014-2024 bluefox, 2014 hobbyquaker 2024-09-03 14:10:23.270 - info: host.MotionEye hostname: MotionEye, node: v20.17.0 2024-09-03 14:10:23.271 - info: host.MotionEye ip addresses: 2001:16b8:a516:1000:597c:7ba7:31d3:6539 fe80::a782:a386:773a:7150 2024-09-03 14:11:26.775 - error: host.MotionEye No connection to databases possible, restart 2024-09-03 14:11:26.782 - info: host.MotionEye iobroker _restart 2024-09-03 14:11:32.990 - info: host.MotionEye iobroker.js-controller version 6.0.11 js-controller starting 2024-09-03 14:11:32.996 - info: host.MotionEye Copyright (c) 2014-2024 bluefox, 2014 hobbyquaker 2024-09-03 14:11:32.998 - info: host.MotionEye hostname: MotionEye, node: v20.17.0 2024-09-03 14:11:32.999 - info: host.MotionEye ip addresses: 192.168.178.72 2001:16b8:a516:1000:597c:7ba7:31d3:6539 fe80::a782:a386:773a:7150 2024-09-03 14:11:33.525 - info: host.MotionEye connected to Objects and States 2024-09-03 14:11:33.554 - info: host.MotionEye added notifications configuration of host 2024-09-03 14:11:33.563 - info: host.MotionEye Node.js version has changed from 20.15.1 to 20.17.0 2024-09-03 14:11:33.637 - info: host.MotionEye Successfully updated capabilities "cap_net_admin, cap_net_bind_service, cap_net_raw" for /usr/bin/node 2024-09-03 14:11:34.574 - info: host.MotionEye 55 instances found 2024-09-03 14:11:34.612 - info: host.MotionEye starting 2 instances 2024-09-03 14:11:35.283 - info: host.MotionEye instance system.adapter.rpi2.2 in version "1.3.2" started with pid 966 2024-09-03 14:11:38.438 - info: rpi2.2 (966) starting. Version 1.3.2 in /opt/iobroker/node_modules/iobroker.rpi2, node: v20.17.0, js-controller: 6.0.11 2024-09-03 14:11:39.237 - info: host.MotionEye instance system.adapter.systeminfo.2 in version "1.1.0" started with pid 1019 2024-09-03 14:11:43.186 - info: systeminfo.2 (1019) starting. Version 1.1.0 in /opt/iobroker/node_modules/iobroker.systeminfo, node: v20.17.0, js-controller: 6.0.11 2024-09-03 14:11:43.212 - error: systeminfo.2 (1019) err from getObjectList: TypeError: Cannot read private member #objects from an object whose class did not declare it 2024-09-03 14:11:43.241 - info: systeminfo.2 (1019) Startup Systeminfo Adapter systeminfo.2: { startup: '#\n' + 'gpio mode 1 output\n' + '#rpi: echo none >/sys/class/leds/led0/trigger\n' + 'echo none >/sys/class/leds/green_led/trigger', items: [ { name: 'System.Temperature', type: 'file', source: '/sys/class/thermal/thermal_zone0/temp', regexp: '', conv: 'number', role: 'value.temperature|°C', write: '', sched: '*/5 * * * *' }, { name: '-System.Memory_[used, free, available]', type: 'exec', source: 'free -k', regexp: 'Mem\\:\\s+\\d+\\s+(\\d+)\\s+(\\d+)\\s+\\d+\\s+\\d+\\s+(\\d+)', conv: '@/1000', role: 'number|MB', write: '', sched: '1 * * * * ' }, { name: 'GPIO.1', type: 'exec', source: 'gpio read 1', regexp: '', conv: '!parseInt(@)', role: 'switch', write: "gpio write 1 @(@ ? '0' : '1')", sched: '*/20 * * * * *' }, { name: 'Currency.[currency/rate]', type: 'web', source: 'https://www.ecb.europa.eu/stats/eurofxref/eurofxref-daily.xml', regexp: "Cube.Cube.Cube[?(@.currency=='USD' || @.currency=='GBP')]", conv: 'xml', role: 'number | €/?', write: '', sched: '19:10:10' }, { name: 'Currency.BTC_CNY', type: 'web', source: 'https://www.alphavantage.co/query?function=CURRENCY_EXCHANGE_RATE&from_currency=BTC&to_currency=CNY&apikey=demo', regexp: '[0][4]', conv: 'json', role: 'number | CNY', write: '', sched: '19:10:10' }, { name: 'UWZ', type: 'web', source: 'http://feed.alertspro.meteogroup.com/AlertsPro/AlertsProPollService.php?method=getWarning&language=de&areaID=UWZAT02402', regexp: '..translationsShortText.DE', conv: 'json', role: 'json', write: '', sched: '*:1' }, { name: '-TestSystem.processes.[command/pcpu]', type: 'info', source: 'processes', regexp: "list[?(@.user == 'pi')]", conv: '', role: '', write: '', sched: '*:2' }, { name: '-XS2.[name/value]', type: 'web', source: "http://xs1/control.html'", regexp: `{"l[?(@.value !== null )]": {"l[tr]": { '![@.children()]':0, name: {_eq:1}, value: {_eq:2, _conv:"parseInt(@.slice(0,-1))"}}, _filter: ($) => $[0].childNodes.length==3}}`, conv: 'html', role: '', write: '', sched: '`:*:*/20' }, { name: 'MSFT.[*]', type: 'web', source: 'https://www.alphavantage.co/query?function=TIME_SERIES_DAILY&symbol=MSFT&apikey=demo', regexp: '[1:2][0:1]', conv: 'json', role: 'number', write: '', sched: '19:10:10' }, { name: 'System.[Mem_used, Mem_free, Swap_used]', type: 'info', source: 'mem', regexp: '[used,free,swapused]', conv: 'parseInt(@*(1000/1024/1024))/1000', role: 'number|MB', write: '', sched: '0/30 * * * *' }, { name: 'System.Software.[*]', type: 'info', source: 'osInfo', regexp: '', conv: '', role: 'string', write: '', sched: '*/3:58' }, { name: 'System.Software.[*]', type: 'info', source: 'versions', regexp: '', conv: '', role: 'string', write: '', sched: '*/3:58' }, { name: 'System.FileSystem.[fs/use]', type: 'info', source: 'fsSize', regexp: '*', conv: '', role: 'number|%', write: '', sched: '*/3:58' }, { name: 'System.FileSystem.IO_[Read,Write]', type: 'info', source: 'fsStats', regexp: '[rx,wx]', conv: 'parseInt(@*(1000/1024/1024))/1000', role: 'number|MB', write: '', sched: '*:/1' }, { name: 'System.Network.[iface/]', type: 'info', source: 'networkInterfaces', regexp: '*', conv: '', role: '', write: '', sched: '*/3:58' }, { name: 'System.Network.Connections.[name/value]', type: 'info', source: 'networkConnections', regexp: "[*][!(@.localaddress == @.peeraddress ? null : {name:`${@.protocol}:${@.localaddress.replace(/\\./g,'_')}:${@.localport}`, value:`${@.state}:${@.peeraddress}:${@.peerport}`})]", conv: '', role: 'string', write: '', sched: '*:/1' }, { name: 'System.Network.MB_[Received,Sent]', type: 'info', source: 'networkStats', regexp: '[rx,tx]', conv: 'parseInt(@*(1000/1024/1024))/1000', role: 'number|MB', write: '', sched: '*:/1' }, { name: 'System.Network.FritzBox.[*]', type: 'info', source: 'inetChecksite("http://fritz.box")', regexp: '', conv: '', role: '', write: '', sched: '*:/1' }, { name: 'System.Network.Latency', type: 'info', source: 'inetLatency', regexp: '', conv: '', role: 'number|ms', write: '', sched: '*:/1' }, { name: 'System.Load.[Load,User,System,Idle]', type: 'info', source: 'currentLoad', regexp: '[currentload, currentload_user, currentload_system, currentload_idle]', conv: 'parseInt(@*1000)/1000', role: 'number|ms', write: '', sched: '*:*:/10' } ]} 2024-09-03 14:11:47.442 - warn: systeminfo.2 (1019) Unhandled error in main: TypeError: Cannot read private member #objects from an object whose class did not declare it ============ Mark until here for C&P ============= iob diag has finished. -
@sms
Auch auf den Slaves sollte der Desktop abgeschaltet werden.
Der frisst nur unnötig Ressourcen und ist eine zusätzliche Fehlerquelle. -
@homoran Gartenklo
======== Start marking the full check here ========= Skript v.2024-05-22 *** BASE SYSTEM *** Static hostname: Gartenklo Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.6.31+rpt-rpi-v8 Architecture: arm64 Model : Raspberry Pi 4 Model B Rev 1.1 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 13:28:45 up 16 min, 2 users, load average: 0.37, 0.20, 0.11 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Tue 2024-09-03 13:28:46 BST Universal time: Tue 2024-09-03 12:28:46 UTC RTC time: n/a Time zone: Europe/London (BST, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': pi HOME=/home/pi GROUPS=pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** Display-Server-Setup *** Display-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 1.9G 274M 1.5G 1.2M 237M 1.7G Swap: 209M 0B 209M Total: 2.1G 274M 1.7G Active iob-Instances: 36 1846 M total memory 262 M used memory 288 M active memory 61 M inactive memory 1417 M free memory 26 M buffer memory 199 M swap cache 199 M total swap 0 M used swap 199 M free swap *** top - Table Of Processes *** top - 13:28:46 up 16 min, 2 users, load average: 0.37, 0.20, 0.11 Tasks: 170 total, 1 running, 169 sleeping, 0 stopped, 0 zombie %Cpu(s): 16.7 us, 16.7 sy, 0.0 ni, 66.7 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 1846.9 total, 1415.4 free, 263.8 used, 226.7 buff/cache MiB Swap: 200.0 total, 200.0 free, 0.0 used. 1583.2 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 660M 0 660M 0% /dev tmpfs tmpfs 185M 1.2M 184M 1% /run /dev/mmcblk0p2 ext4 29G 3.5G 24G 13% / tmpfs tmpfs 924M 0 924M 0% /dev/shm tmpfs tmpfs 5.0M 16K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 510M 64M 447M 13% /boot/firmware tmpfs tmpfs 185M 0 185M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Tue Sep 3 13:11:56 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=DC:A6:32:5C:62:46 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=d88e2e88-02 rootfstype=ext4 fsck.repair=yes rootwait cfg80211.ieee80211_regdom=DE [Tue Sep 3 13:11:58 2024] EXT4-fs (mmcblk0p2): mounted filesystem 93c89e92-8f2e-4522-ad32-68faed883d2f ro with ordered data mode. Quota mode: none. [Tue Sep 3 13:12:00 2024] EXT4-fs (mmcblk0p2): re-mounted 93c89e92-8f2e-4522-ad32-68faed883d2f r/w. Quota mode: none. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime,commit=600 |-/sys sysfs sysfs rw,nosuid,nodev,noexec,relatime | |-/sys/kernel/security securityfs securityfs rw,nosuid,nodev,noexec,relatime | |-/sys/fs/cgroup cgroup2 cgroup2 rw,nosuid,nodev,noexec,relatime,nsdelegate,memory_recursiveprot | |-/sys/fs/pstore pstore pstore rw,nosuid,nodev,noexec,relatime | |-/sys/fs/bpf bpf bpf rw,nosuid,nodev,noexec,relatime,mode=700 | |-/sys/kernel/debug debugfs debugfs rw,nosuid,nodev,noexec,relatime | |-/sys/kernel/tracing tracefs tracefs rw,nosuid,nodev,noexec,relatime | |-/sys/fs/fuse/connections fusectl fusectl rw,nosuid,nodev,noexec,relatime | `-/sys/kernel/config configfs configfs rw,nosuid,nodev,noexec,relatime |-/proc proc proc rw,relatime | `-/proc/sys/fs/binfmt_misc systemd-1 autofs rw,relatime,fd=30,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=3420 | `-/proc/sys/fs/binfmt_misc binfmt_misc binfmt_misc rw,nosuid,nodev,noexec,relatime |-/dev udev devtmpfs rw,nosuid,relatime,size=675396k,nr_inodes=168849,mode=755 | |-/dev/pts devpts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 | |-/dev/shm tmpfs tmpfs rw,nosuid,nodev | `-/dev/mqueue mqueue mqueue rw,nosuid,nodev,noexec,relatime |-/run tmpfs tmpfs rw,nosuid,nodev,noexec,relatime,size=189128k,mode=755 | |-/run/lock tmpfs tmpfs rw,nosuid,nodev,noexec,relatime,size=5120k | |-/run/credentials/systemd-sysctl.service ramfs ramfs ro,nosuid,nodev,noexec,relatime,mode=700 | |-/run/credentials/systemd-sysusers.service ramfs ramfs ro,nosuid,nodev,noexec,relatime,mode=700 | |-/run/credentials/systemd-tmpfiles-setup-dev.service ramfs ramfs ro,nosuid,nodev,noexec,relatime,mode=700 | |-/run/rpc_pipefs sunrpc rpc_pipefs rw,relatime | |-/run/credentials/systemd-tmpfiles-setup.service ramfs ramfs ro,nosuid,nodev,noexec,relatime,mode=700 | `-/run/user/1000 tmpfs tmpfs rw,nosuid,nodev,relatime,size=189124k,nr_inodes=47281,mode=700,uid=1000,gid=1000 `-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 875M /var/ 301M /var/log 300M /var/log/journal/8b083168c8bc4150ad1b17664abb30f7 300M /var/log/journal 209M /var/cache Archived and active journals take up 299.8M in the file system. /opt/iobroker/backups: 4.0K /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 15M /opt/iobroker/iobroker-data/files 15M /opt/iobroker/iobroker-data/ 13M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js 13M /opt/iobroker/iobroker-data/files/admin.admin/custom/static 13M /opt/iobroker/iobroker-data/files/admin.admin/custom The five largest files in iobroker-data are: 6.3M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js.map 2.8M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js 1.6M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_mui_material_Accordion_index_js-node_modules_mui_material_AccordionDetai-57e02d.0886b730.chunk.js.map 652K /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_mui_material_index_js.40e01f69.chunk.js.map 528K /opt/iobroker/iobroker-data/states.jsonl USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** NodeJS-Installation *** /usr/bin/nodejs v20.17.0 /usr/bin/node v20.17.0 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 /usr/bin/corepack 0.29.3 nodejs: Installed: 20.17.0-1nodesource1 Candidate: 20.17.0-1nodesource1 Version table: *** 20.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 20.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 18.19.0+dfsg-6~deb12u2 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages 18.19.0+dfsg-6~deb12u1 500 500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. At least one iobroker host is running. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 6.0.11 admin: 6.13.16 javascript: "javascript" not found nodejs modules from github: 0 Adapter State + system.adapter.admin.0 : admin : Homee - enabled, port: 7770, bind: 0.0.0.0, run as: admin + system.adapter.alpha-ess.0 : alpha-ess : Homee - enabled + system.adapter.backitup.0 : backitup : Homee - enabled system.adapter.coronavirus-statistics.0 : coronavirus-statistics: Homee - enabled system.adapter.daswetter.0 : daswetter : Homee - enabled system.adapter.devices.0 : devices : Homee - enabled + system.adapter.discovery.0 : discovery : Homee - enabled + system.adapter.ds18b20.1 : ds18b20 : Kellerkind - enabled + system.adapter.ds18b20.3 : ds18b20 : PapaHuette - enabled system.adapter.dwd.0 : dwd : Homee - enabled + system.adapter.ecovacs-deebot.0 : ecovacs-deebot : Homee - enabled + system.adapter.email.0 : email : Homee - enabled + system.adapter.growatt.0 : growatt : Homee - enabled + system.adapter.growatt.1 : growatt : Homee - enabled + system.adapter.homeconnect.0 : homeconnect : Homee - enabled system.adapter.ical.0 : ical : Homee - enabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : Homee - enabled + system.adapter.influxdb.0 : influxdb : Homee - enabled, port: 8086 + system.adapter.javascript.0 : javascript : Homee - enabled + system.adapter.modbus.0 : modbus : Homee - enabled + system.adapter.modbus.1 : modbus : Homee - enabled + system.adapter.mqtt.0 : mqtt : Homee - enabled, port: 1886, bind: 0.0.0.0 + system.adapter.nina.0 : nina : Homee - enabled system.adapter.pegelalarm.0 : pegelalarm : Homee - enabled system.adapter.pegelalarm.1 : pegelalarm : Homee - enabled + system.adapter.pollenflug.0 : pollenflug : Homee - enabled + system.adapter.rpi2.0 : rpi2 : Homee - enabled + system.adapter.rpi2.1 : rpi2 : Kellerkind - enabled + system.adapter.rpi2.2 : rpi2 : MotionEye - enabled + system.adapter.rpi2.3 : rpi2 : PapaHuette - enabled + system.adapter.rpi2.4 : rpi2 : Gartenklo - enabled + system.adapter.semp.0 : semp : Homee - enabled + system.adapter.smartmeter.0 : smartmeter : Homee - enabled + system.adapter.sonoff.0 : sonoff : Homee - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.systeminfo.0 : systeminfo : Homee - enabled + system.adapter.systeminfo.1 : systeminfo : Kellerkind - enabled + system.adapter.systeminfo.2 : systeminfo : MotionEye - enabled + system.adapter.systeminfo.3 : systeminfo : PapaHuette - enabled + system.adapter.systeminfo.4 : systeminfo : Gartenklo - enabled + system.adapter.tankerkoenig.0 : tankerkoenig : Homee - enabled system.adapter.vis-bars.0 : vis-bars : Homee - enabled system.adapter.vis-canvas-gauges.0 : vis-canvas-gauges : Homee - enabled system.adapter.vis-history.0 : vis-history : Homee - enabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : Homee - enabled system.adapter.vis-icontwo.0 : vis-icontwo : Homee - enabled + system.adapter.vis-inventwo.0 : vis-inventwo : Homee - enabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : Homee - enabled system.adapter.vis-justgage.0 : vis-justgage : Homee - enabled system.adapter.vis-metro.0 : vis-metro : Homee - enabled system.adapter.vis-plumb.0 : vis-plumb : Homee - enabled system.adapter.vis-rgraph.0 : vis-rgraph : Homee - enabled system.adapter.vis-timeandweather.0 : vis-timeandweather : Homee - enabled system.adapter.vis.0 : vis : Homee - enabled + system.adapter.web.0 : web : Homee - enabled, port: 7777, bind: 0.0.0.0, run as: admin + system.adapter.worx.2 : worx : PapaHuette - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : Homee - enabled, port: 7770, bind: 0.0.0.0, run as: admin + system.adapter.influxdb.0 : influxdb : Homee - enabled, port: 8086 + system.adapter.mqtt.0 : mqtt : Homee - enabled, port: 1886, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : Homee - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.web.0 : web : Homee - enabled, port: 7777, bind: 0.0.0.0, run as: admin ioBroker-Repositories ┌─────────┬────────────────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼────────────────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'Stable (default)' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'Beta (latest)' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴────────────────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): Stable (default) Upgrade policy: none Installed ioBroker-Instances Used repository: Stable (default) Adapter "admin" : 7.0.23 , installed 6.13.16 [Updatable] Adapter "backitup" : 3.0.19 , installed 2.11.0 [Updatable] Adapter "discovery" : 4.5.0 , installed 4.4.0 [Updatable] Controller "js-controller": 6.0.11 , installed 6.0.11 Adapter "rpi2" : 1.3.2 , installed 2.0.0-alpha.6 Adapter "systeminfo" : 1.2.0 , installed 1.1.0 [Updatable] Objects and States Please stand by - This may take a while Objects: 13068 States: 13756 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian bookworm InRelease Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease Hit:3 http://archive.raspberrypi.com/debian bookworm InRelease Hit:4 http://deb.debian.org/debian bookworm-updates InRelease Hit:5 https://deb.nodesource.com/node_20.x nodistro InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 6237 650/sshd: /usr/sbin tcp6 0 0 :::22 :::* LISTEN 0 6239 650/sshd: /usr/sbin udp 0 0 0.0.0.0:47287 0.0.0.0:* 104 4655 439/avahi-daemon: r udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 4653 439/avahi-daemon: r udp6 0 0 :::55418 :::* 104 4656 439/avahi-daemon: r udp6 0 0 :::5353 :::* 104 4654 439/avahi-daemon: r udp6 0 0 fe80::9233:c5ee:213:546 :::* 0 4015 524/NetworkManager *** Log File - Last 25 Lines *** /1024 2024-09-03 13:25:54.984 - error: rpi2.4 (775) Cannot evaluate: Filesystem 1K-blocks Used Available Use% Mounted on /dev/mmcblk0p2 30097288 3619380 24929608 13% / /1024 2024-09-03 13:25:55.084 - error: rpi2.4 (775) Cannot evaluate: Filesystem 1K-blocks Used Available Use% Mounted on /dev/mmcblk0p2 30097288 3619380 24929608 13% / /1024 2024-09-03 13:26:54.974 - error: rpi2.4 (775) Cannot evaluate: Filesystem 1K-blocks Used Available Use% Mounted on /dev/mmcblk0p2 30097288 3619380 24929608 13% / /1024 2024-09-03 13:26:55.054 - error: rpi2.4 (775) Cannot evaluate: Filesystem 1K-blocks Used Available Use% Mounted on /dev/mmcblk0p2 30097288 3619380 24929608 13% / /1024 2024-09-03 13:27:54.992 - error: rpi2.4 (775) Cannot evaluate: Filesystem 1K-blocks Used Available Use% Mounted on /dev/mmcblk0p2 30097288 3618864 24930124 13% / /1024 2024-09-03 13:27:55.075 - error: rpi2.4 (775) Cannot evaluate: Filesystem 1K-blocks Used Available Use% Mounted on /dev/mmcblk0p2 30097288 3618864 24930124 13% / /1024 2024-09-03 13:28:55.040 - error: rpi2.4 (775) Cannot evaluate: Filesystem 1K-blocks Used Available Use% Mounted on /dev/mmcblk0p2 30097288 3618948 24930040 13% / /1024 2024-09-03 13:28:55.156 - error: rpi2.4 (775) Cannot evaluate: Filesystem 1K-blocks Used Available Use% Mounted on /dev/mmcblk0p2 30097288 3618948 24930040 13% / /1024 ============ Mark until here for C&P ============= iob diag has finished. -
@codierknecht erledigt:
pi@Kellerkind:~ $ sudo systemctl set-default multi-user.target Removed "/etc/systemd/system/default.target". Created symlink /etc/systemd/system/default.target → /lib/systemd/system/multi-user.target. pi@Kellerkind:~ $ -
@sms sagte in Zeitplan startet nicht mehr:
Time zone: Europe/London (BST, +0100)
beim Kellerkind!
und im Gartenklo
@sms sagte in Zeitplan startet nicht mehr:
Time zone: Europe/London (BST, +0100)
-
@homoran geändert
-
@sms So, dann müsste das Großreinemachen beendet sein und wir können wieder zurück zum Programm.
Die Anregungen dazu hast du alle gelesen?
Insbesondere
https://forum.iobroker.net/post/1197438und
-
@homoran so könnte es funktionieren:
-
@sms sagte in Zeitplan startet nicht mehr:
so könnte es funktionieren:
ja, wobei ich gerade nicht alles zuordnen kann, was du da programmiert hast.
Was genau schwebt dir vor dass passieren soll?
-
@homoran Das oben war jetzt nur ein Testaufbau zum Schauen ob es funktioniert.
Der 11_Test wurde "wahr" bei erreichen der eingestellten Uhrzeit 14:45 Uhr. Das Andere war lediglich eine Ausgabe der aktuellen Uhrzeit, zum Schauen ob die stimmt.
Nachher soll entweder die Spülmaschine, die Waschmaschine oder der Trockner zu einer bestimmten Uhrzeit starten. Was auch schon funktioniert hatte.
Das eigentliche Problem wird die Uhrzeit mit Einstellung "London" gewesen sein. Das kann ich später mit dem Trockner mal ausprobieren. -
@sms
In den Zeitplan kommt dann nur das Einschalten des Verbrauchers. -
@codierknecht So sieht das dann aus
Variable Uhrzeit bedeutet, das ich die Vorwahl Uhrzeit eingestellt habe. Es gibt noch andere Vorwahlmöglichkeiten wie z.B. Solarproduktion >4000W.
-
@sms
Droht zu klappen.
Allerdings nicht, wenn zu der Zeit zufälligerweise noch die Waschmaschine läuft
-
@codierknecht
stimmt, das muss dann raus. -
@sms sagte in Zeitplan startet nicht mehr:
das muss dann raus
Das kannst nur Du entscheiden.
Wenn beide am gleichen Kreis hängen, könnte das problematisch werden.
Sind die hingegen separat abgesichert, sollte das kein Problem sein. -
@codierknecht muss ich das noch auf "wahr" abfragen?
also so:
-
@codierknecht
"Das kannst nur Du entscheiden.
Wenn beide am gleichen Kreis hängen, könnte das problematisch werden.
Sind die hingegen separat abgesichert, sollte das kein Problem sein."das war eher deshalb, damit die Sonnenenergie besser genutzt wird
-
@sms
Das ist sinnfrei. "Wahr" ist und bleibt "wahr".
