UNSOLVED Node.js Update funktioniert nicht
-
sorry bin leider nur Gelegenheitsanwender. Ich hatte folgende Befehle nachgeschoben
sudo apt update sudo apt upgradeJetzt ist der Raspberry beschäftigt
-
-
Ja, aber ich habe mittlerweile realisiert, dass der Normaluser nicht so stramm am Update ist, wie wir es sind, und wie es natürlich auch erforderlich ist.
Viele kommen von Windows und vertrauen fälschlicherweise darauf, dass das Betriebssystem automatisch die Sicherheitsupdates implementiert. Es stimmt aber nicht, auch dort muss man selbst Hand anlegen.
Ich denke, dass es unser aller Aufgabe ist, exakt darauf hinzuweisen, um unseren Followern eine möglichst sichere Teilnahme zu ermöglichen.
-
ja, so ist es leider.
Jetzt ist das Terminalfenster ausgestiegen und ich habe keinen Zugriff mehr. Gibt es noch eine Rettung oder war es das dann? -
@smartuser_1 sagte in Node.js Update funktioniert nicht:
Jetzt ist das Terminalfenster ausgestiegen und ich habe keinen Zugriff mehr.
Bau die Verbindung neu auf.
-
das habe ich schon mehrfach probiert ...
-
Und was genau bekommst du auf welche Kommandos als Antwort?
-
im Prinzip sagt das PuTTY Fenster mit der gespeicherten Verbindung inactive und zeigt gar nix an
-
Dann starte puTTY neu. Oder verwende gleich die powershell. Ist eh imho besser als puTTY.
-
@thomas-braun sagte in Node.js Update funktioniert nicht:
Dann starte puTTY neu. Oder verwende gleich die powershell. Ist eh imho besser als puTTY.
Geht auch mit der normalen Eingabeaufforderung:
ssh pi@192..... -
@meister-mopper gebe Dir prinzipiell Recht. Allerdings wenn man mit einem Smarthome schon alles mögliche überwacht, dann sollte man vielleicht auch das System selbst überwachen. Im neuen Admin gibts ja einen entsprechenden Datenpunkt bzw. man kann ja auch den Linuxadapter nutzen, um diese Updates über seine Visualisierung anzustossen.
Bei mir leuchtet dann eine gelbe Alarmglocke.
Bei Hardware gebe ich Dir allerdings Recht, da würde ich keine Firmware Updates machen, wenn nicht unbedingt nötig. Da kann man schon mal was richtig kaputt machen.
-
@mickym
... so nach einen harten Aus-/Ein ;-( habe ich wieder Zugriff. In der Iobroker Info steht auch Node.js: v20.18.0.
Was sollte ich jetzt tun und wie wäre das optimale Vorgehen zum Nachlesen?Danke für Eure Hilfe! Vg
-
@smartuser_1 sagte in Node.js Update funktioniert nicht:
Was sollte ich jetzt tun und wie wäre das optimale Vorgehen zum Nachlesen?
Gib mal die Ausgabe von
iob diag(Langfassung) bekannt.
-
@smartuser_1 Na dann ist ja nochmal alles gut gegangen.
- Irgendwann wirst Du wohl mal dein ganzes System updaten müssen, da inzwischen bookworm die aktuelle Linuxversion ist. Aber da nimmt Dich sicher @Thomas-Braun an die Hand, da er der Hauptansprechpartner bei Linuxfragen ist. -
im Prinzip macht er da nix, muss ich vorher was installieren?
-
@smartuser_1 sagte in Node.js Update funktioniert nicht:
im Prinzip macht er da nix, muss ich vorher was installieren?
Nein. Aber mir scheinen die Rechte bei dir verbogen zu sein.
Funktioniert
curl -sLf -o diag.sh https://iobroker.net/diag.sh && bash diag.shdenn?
-
sorry, war der falsche User, kommt gleich
-
======== Start marking the full check here =========
Skript v.2024-08-12 *** BASE SYSTEM *** Static hostname: raspberrypi Icon name: computer Operating System: Raspbian GNU/Linux 11 (bullseye) Kernel: Linux 6.1.21-v8+ Architecture: arm64 OS is similar to: debian Model : Raspberry Pi 4 Model B Rev 1.2 Docker : false Virtualization : none Kernel : aarch64 Userland : 32 bit Systemuptime and Load: 21:32:28 up 23 min, 4 users, load average: 0.13, 0.17, 0.25 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Fri 2024-10-04 21:32:28 CEST Universal time: Fri 2024-10-04 19:32:28 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': pi HOME=/home/pi GROUPS=pi adm dialout cdrom sudo audio video plugdev games users input netdev lpadmin grafana gpio i2c spi iobroker smarthome User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video bluetooth gpio i2c smarthome *** Display-Server-Setup *** Display-Server: true Desktop: Terminal: tty Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 3.8G 806M 2.2G 26M 818M 2.9G Swap: 99M 0B 99M Total: 3.9G 806M 2.3G Active iob-Instances: 15 3794 M total memory 806 M used memory 1115 M active memory 338 M inactive memory 2169 M free memory 70 M buffer memory 747 M swap cache 99 M total swap 0 M used swap 99 M free swap *** top - Table Of Processes *** top - 21:32:28 up 23 min, 4 users, load average: 0.13, 0.17, 0.25 Tasks: 224 total, 1 running, 223 sleeping, 0 stopped, 0 zombie %Cpu(s): 1.4 us, 2.8 sy, 0.0 ni, 95.8 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 3794.3 total, 2169.5 free, 806.0 used, 818.9 buff/cache MiB Swap: 100.0 total, 100.0 free, 0.0 used. 2901.4 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * home-pi-Drive-share.mount loaded failed failed /home/pi/Drive/share LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 1 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 29G 9.6G 19G 35% / devtmpfs devtmpfs 1.7G 0 1.7G 0% /dev tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm tmpfs tmpfs 759M 2.0M 757M 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 253M 51M 202M 20% /boot tmpfs tmpfs 380M 24K 380M 1% /run/user/1000 /dev/sda vfat 497M 2.4M 495M 1% /media/pi/EE37-25251 tmpfs tmpfs 380M 20K 380M 1% /run/user/1002 Messages concerning ext4 filesystem in dmesg: [Fri Oct 4 21:08:38 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=DC:A6:32:A1:B9:99 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=7e480b2a-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [Fri Oct 4 21:08:39 2024] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem [Fri Oct 4 21:08:39 2024] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [Fri Oct 4 21:08:40 2024] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs [Fri Oct 4 21:08:40 2024] EXT4-fs (mmcblk0p2): 296 orphan inodes deleted [Fri Oct 4 21:08:40 2024] EXT4-fs (mmcblk0p2): recovery complete [Fri Oct 4 21:08:40 2024] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Fri Oct 4 21:08:40 2024] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Fri Oct 4 21:08:44 2024] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime |-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,flush,errors=remount-ro `-/media/pi/EE37-25251 /dev/sda vfat rw,nosuid,nodev,relatime,sync,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 4.7G /var/ 3.1G /var/log 2.9G /var/log/journal/6863a4a704a449d0b3397f55bec3e7ce 2.9G /var/log/journal 1.3G /var/cache/apt/archives Archived and active journals take up 2.8G in the file system. /opt/iobroker/backups: 25M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 282M /opt/iobroker/iobroker-data/ 167M /opt/iobroker/iobroker-data/files 82M /opt/iobroker/iobroker-data/backup-objects 67M /opt/iobroker/iobroker-data/files/javascript.admin 48M /opt/iobroker/iobroker-data/files/javascript.admin/static The five largest files in iobroker-data are: 21M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.aaea95f8.js.map 14M /opt/iobroker/iobroker-data/objects.jsonl 8.3M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.aaea95f8.js 7.5M /opt/iobroker/iobroker-data/files/javascript.admin/static/js/691.26ff76ce.chunk.js.map 7.1M /opt/iobroker/iobroker-data/files/javascript.admin/static/js/610.d3cce782.chunk.js.map USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** NodeJS-Installation *** /usr/bin/nodejs v20.18.0 /usr/bin/node v20.18.0 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 /usr/bin/corepack 0.29.3 nodejs: Installed: 20.18.0-1nodesource1 Candidate: 20.18.0-1nodesource1 Version table: *** 20.18.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 100 /var/lib/dpkg/status 20.17.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.16.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.15.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.15.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.14.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.13.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.13.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.12.2-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.12.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.12.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.11.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.11.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.10.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.9.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.8.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.8.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.7.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.6.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.6.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.5.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.5.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.4.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.3.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.3.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.2.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.1.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.0.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 12.22.12~dfsg-1~deb11u5 500 500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 4.0.24 admin: 7.1.5 javascript: 7.1.6 nodejs modules from github: 0 Adapter State + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.backitup.0 : backitup : raspberrypi - enabled + system.adapter.bshb.0 : bshb : raspberrypi - enabled + system.adapter.discovery.0 : discovery : raspberrypi - enabled + system.adapter.followthesun.0 : followthesun : raspberrypi - enabled + system.adapter.fritzdect.0 : fritzdect : raspberrypi - enabled + system.adapter.influxdb.0 : influxdb : raspberrypi - enabled, port: 8086 + system.adapter.javascript.0 : javascript : raspberrypi - enabled + system.adapter.kecontact.0 : kecontact : raspberrypi - enabled + system.adapter.modbus.0 : modbus : raspberrypi - enabled + system.adapter.modbus.1 : modbus : raspberrypi - enabled system.adapter.modbus.2 : modbus : raspberrypi - disabled + system.adapter.smartthings.0 : smartthings : raspberrypi - enabled system.adapter.vis.0 : vis : raspberrypi - enabled + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.yamaha.0 : yamaha : raspberrypi - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.influxdb.0 : influxdb : raspberrypi - enabled, port: 8086 + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 7.1.5 , installed 7.1.5 Adapter "backitup" : 3.0.22 , installed 2.8.7 [Updatable] Adapter "bshb" : 0.3.0 , installed 0.2.4 [Updatable] Adapter "discovery" : 5.0.0 , installed 4.2.0 [Updatable] Adapter "followthesun" : 0.5.1 , installed 0.4.2 [Updatable] Adapter "fritzdect" : 2.5.11 , installed 2.3.1 [Updatable] Adapter "influxdb" : 4.0.2 , installed 4.0.2 Adapter "javascript" : 8.8.3 , installed 7.1.6 [Updatable] Controller "js-controller": 6.0.11 , installed 4.0.24 [Updatable] Adapter "kecontact" : 2.2.0 , installed 2.0.2 [Updatable] Adapter "modbus" : 6.2.3 , installed 5.0.11 [Updatable] Adapter "simple-api" : 2.8.0 , installed 2.7.2 [Updatable] Adapter "socketio" : 6.7.1 , installed 6.6.0 [Updatable] Adapter "vis" : 1.5.6 , installed 1.4.16 [Updatable] Adapter "web" : 6.2.5 , installed 6.1.10 [Updatable] Adapter "ws" : 2.6.2 , installed 2.5.8 [Updatable] Adapter "yamaha" : 0.5.4 , installed 0.5.3 [Updatable] Objects and States Please stand by - This may take a while Objects: 2508 States: 2075 *** OS-Repositories and Updates *** W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://repos.influxdata.com/debian bullseye InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://packages.grafana.com/oss/deb stable InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 963FA27710458545 W: Failed to fetch https://packages.grafana.com/oss/deb/dists/stable/InRelease The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 963FA27710458545 W: Failed to fetch https://repos.influxdata.com/debian/dists/bullseye/InRelease The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E W: Some index files failed to download. They have been ignored, or old ones used instead. Hit:1 http://archive.raspberrypi.org/debian bullseye InRelease Hit:2 http://raspbian.raspberrypi.org/raspbian bullseye InRelease Get:3 https://repos.influxdata.com/debian bullseye InRelease [12.9 kB] Get:4 https://packages.grafana.com/oss/deb stable InRelease [7660 B] Hit:5 https://deb.nodesource.com/node_20.x nodistro InRelease Err:3 https://repos.influxdata.com/debian bullseye InRelease The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E Err:4 https://packages.grafana.com/oss/deb stable InRelease The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 963FA27710458545 Fetched 12.9 kB in 1s (9433 B/s) Reading package lists... W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://repos.influxdata.com/debian bullseye InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://packages.grafana.com/oss/deb stable InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 963FA27710458545 W: Failed to fetch https://packages.grafana.com/oss/deb/dists/stable/InRelease The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 963FA27710458545 W: Failed to fetch https://repos.influxdata.com/debian/dists/bullseye/InRelease The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E W: Some index files failed to download. They have been ignored, or old ones used instead. Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:8088 0.0.0.0:* LISTEN 999 16432 608/influxd tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 16176 650/sshd: /usr/sbin tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 11216 592/cupsd tcp 0 0 0.0.0.0:139 0.0.0.0:* LISTEN 0 18770 1294/smbd tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 19318 1224/iobroker.js-co tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 19282 1224/iobroker.js-co tcp 0 0 0.0.0.0:445 0.0.0.0:* LISTEN 0 18769 1294/smbd tcp6 0 0 ::1:631 :::* LISTEN 0 11215 592/cupsd tcp6 0 0 :::8086 :::* LISTEN 999 15320 608/influxd tcp6 0 0 :::8081 :::* LISTEN 1001 26796 1805/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1001 29678 4118/io.web.0 tcp6 0 0 :::22 :::* LISTEN 0 16178 650/sshd: /usr/sbin tcp6 0 0 :::139 :::* LISTEN 0 18768 1294/smbd tcp6 0 0 :::445 :::* LISTEN 0 18767 1294/smbd tcp6 0 0 :::3000 :::* LISTEN 115 18001 600/grafana-server udp 0 0 0.0.0.0:631 0.0.0.0:* 0 16448 738/cups-browsed udp 0 0 0.0.0.0:7090 0.0.0.0:* 1001 31248 4064/io.kecontact.0 udp 0 0 0.0.0.0:7092 0.0.0.0:* 1001 31249 4064/io.kecontact.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 15996 483/avahi-daemon: r udp 0 0 0.0.0.0:38139 0.0.0.0:* 1001 28617 4064/io.kecontact.0 udp 0 0 0.0.0.0:40821 0.0.0.0:* 108 15998 483/avahi-daemon: r udp 0 0 0.0.0.0:68 0.0.0.0:* 0 18440 537/dhcpcd udp 0 0 192.168.178.255:137 0.0.0.0:* 0 17857 603/nmbd udp 0 0 192.168.178.41:137 0.0.0.0:* 0 17856 603/nmbd udp 0 0 0.0.0.0:137 0.0.0.0:* 0 17443 603/nmbd udp 0 0 192.168.178.255:138 0.0.0.0:* 0 17859 603/nmbd udp 0 0 192.168.178.41:138 0.0.0.0:* 0 17858 603/nmbd udp 0 0 0.0.0.0:138 0.0.0.0:* 0 17444 603/nmbd udp6 0 0 :::5353 :::* 108 15997 483/avahi-daemon: r udp6 0 0 :::42293 :::* 108 15999 483/avahi-daemon: r udp6 0 0 :::546 :::* 0 16546 537/dhcpcd *** Log File - Last 25 Lines *** 2024-10-04 21:10:05.435 - info: kecontact.0 (4064) config minTime: 300 2024-10-04 21:10:05.435 - info: kecontact.0 (4064) config regardTime: 0 2024-10-04 21:10:05.436 - info: kecontact.0 (4064) config maxPower: 0 2024-10-04 21:10:05.436 - info: kecontact.0 (4064) config stateEnergyMeter1: 2024-10-04 21:10:05.436 - info: kecontact.0 (4064) config stateEnergyMeter2: 2024-10-04 21:10:05.436 - info: kecontact.0 (4064) config stateEnergyMeter3: 2024-10-04 21:10:05.437 - info: kecontact.0 (4064) config wallboxNotIncluded: false 2024-10-04 21:10:05.850 - info: vis.0 (4097) starting. Version 1.4.16 in /opt/iobroker/node_modules/iobroker.vis, node: v20.18.0, js-controller: 4.0.24 2024-10-04 21:10:06.258 - info: vis.0 (4097) vis license is OK. 2024-10-04 21:10:06.336 - warn: kecontact.0 (4064) Firmware page could not be loaded (404) 2024-10-04 21:10:06.619 - info: host.raspberrypi instance system.adapter.web.0 started with pid 4118 2024-10-04 21:10:07.041 - info: vis.0 (4097) Terminated (NO_ERROR): Without reason 2024-10-04 21:10:07.656 - info: host.raspberrypi instance system.adapter.vis.0 terminated while should be started once 2024-10-04 21:10:09.505 - info: web.0 (4118) starting. Version 6.1.10 in /opt/iobroker/node_modules/iobroker.web, node: v20.18.0, js-controller: 4.0.24 2024-10-04 21:10:10.659 - info: host.raspberrypi instance system.adapter.smartthings.0 started with pid 4133 2024-10-04 21:10:15.455 - info: web.0 (4118) socket.io server listening on port 8082 2024-10-04 21:10:15.470 - info: web.0 (4118) http server listening on port 8082 2024-10-04 21:10:17.167 - info: smartthings.0 (4133) starting. Version 0.0.4 in /opt/iobroker/node_modules/iobroker.smartthings, node: v20.18.0, js-controller: 4.0.24 2024-10-04 21:10:17.635 - info: smartthings.0 (4133) 0 devices detected 2024-10-04 21:25:00.027 - info: javascript.0 (2853) script.js.53_WP_Monat_CSV: exec: sed -i s/2024.10/#2024.10/g /etc/grafana/WP_Daten.csv 2024-10-04 21:25:05.040 - info: javascript.0 (2853) script.js.53_WP_Monat_CSV: exec: sed -i '/^#/d' /etc/grafana/WP_Daten.csv 2024-10-04 21:25:10.049 - info: javascript.0 (2853) script.js.53_WP_Monat_CSV: exec: echo "2024.10,309 ,40.2, 10.49" >> /etc/grafana/WP_Daten.csv 2024-10-04 21:29:59.997 - info: javascript.0 (2853) script.js.53_WP_Monat_CSV: exec: sed -i s/2024.10/#2024.10/g /etc/grafana/WP_Daten.csv 2024-10-04 21:30:05.009 - info: javascript.0 (2853) script.js.53_WP_Monat_CSV: exec: sed -i '/^#/d' /etc/grafana/WP_Daten.csv 2024-10-04 21:30:10.016 - info: javascript.0 (2853) script.js.53_WP_Monat_CSV: exec: echo "2024.10,309 ,40.2, 10.49" >> /etc/grafana/WP_Daten.csv============ Mark until here for C&P =============
-
@smartuser_1 sagte in Node.js Update funktioniert nicht:
Kernel : aarch64
Userland : 32 bitInstallier da in nächster Zeit RaspberryOS 12 'Bookworm' NEU.
Dann OHNE
Display-Server: true
Also OHNE Desktop-Umgebung. Es sei denn da hängt unmittelbar ein Bildschirm am Raspberry.
296 orphan inodes deleted
Aber verwende ein neues Speichermedium, das jetztige ist morsch. Das hat auch eben den langen Systemstart verursacht.
js-controller: 4.0.24
Updaten. Genauso wie alle anderen iob-Adapter.
Die Repos (grafana + influx) musst du dann auch neu anlegen, da ist altes Zeug drin.
-
Ich danke Euch allen, ist nochmal gut gegangen ;-). Top.
Gibt es zum Update von NodeJS und Raspberry OS noch eine Anleitung zum Nachlesen?Viele Grüße ...
