Updateschwierigkeiten js-controller 4.0.23
-
-
@thomas-braun bislang tut sich nix
fabio@IoBroker:~ $ iob start admin fabio@IoBroker:~ $ -
iob diag -
bash Skript v.2024-08-12 *** BASE SYSTEM *** Static hostname: IoBroker Icon name: computer Operating System: Debian GNU/Linux 11 (bullseye) Kernel: Linux 6.1.21-v8+ Architecture: arm64 OS is similar to: Model : Raspberry Pi 4 Model B Rev 1.2 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 21:35:42 up 48 min, 2 users, load average: 0.35, 0.21, 0.53 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: ~ Under-voltage has occurred ~ Arm frequency capping has occurred ~ Throttling has occurred ~ Soft temperature limit has occurred *** Time and Time Zones *** Local time: Tue 2024-10-08 21:35:42 CEST Universal time: Tue 2024-10-08 19:35:42 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': fabio HOME=/home/fabio GROUPS=fabio sudo iobroker User that is running 'js-controller': js-controller is not running *** Display-Server-Setup *** Display-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 3.8G 107M 920M 1.0M 2.8G 3.6G Swap: 99M 0B 99M Total: 3.9G 107M 1.0G Active iob-Instances: 1 3794 M total memory 107 M used memory 213 M active memory 2439 M inactive memory 920 M free memory 68 M buffer memory 2698 M swap cache 99 M total swap 0 M used swap 99 M free swap *** top - Table Of Processes *** top - 21:35:43 up 48 min, 2 users, load average: 0.35, 0.21, 0.53 Tasks: 162 total, 1 running, 161 sleeping, 0 stopped, 0 zombie %Cpu(s): 1.4 us, 2.9 sy, 0.0 ni, 95.7 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 3794.3 total, 919.3 free, 107.8 used, 2767.3 buff/cache MiB Swap: 100.0 total, 100.0 free, 0.0 used. 3610.0 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * iobroker.service loaded failed failed ioBroker Server * pivccu-dkms.service loaded failed failed piVCCU DKMS Modules LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 2 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 59G 8.7G 48G 16% / devtmpfs devtmpfs 1.7G 0 1.7G 0% /dev tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm tmpfs tmpfs 759M 1.2M 758M 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 255M 32M 224M 13% /boot tmpfs tmpfs 380M 0 380M 0% /run/user/1000 tmpfs tmpfs 380M 0 380M 0% /run/user/1002 Messages concerning ext4 filesystem in dmesg: [Tue Oct 8 20:46:56 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=DC:A6:32:5A:83:48 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=tty1 root=PARTUUID=2a0531f8-02 rootfstype=ext4 fsck.repair=yes rootwait [Tue Oct 8 20:46:56 2024] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Tue Oct 8 20:46:56 2024] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Tue Oct 8 20:46:58 2024] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime `-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: du: cannot access '/var/lib/lxcfs/cgroup': Input/output error 3.7G /var/ 2.1G /var/log/journal/664a8e581ec84405863df59a10cf9293 2.1G /var/log/journal 2.1G /var/log 817M /var/lib Hint: You are currently not seeing messages from other users and the system. Users in groups 'adm', 'systemd-journal' can see all messages. Pass -q to turn off this notice. Archived and active journals take up 8.0M in the file system. /opt/iobroker/backups: 58M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 913M /opt/iobroker/iobroker-data/ 840M /opt/iobroker/iobroker-data/files 617M /opt/iobroker/iobroker-data/files/javascript.admin 560M /opt/iobroker/iobroker-data/files/javascript.admin/static 558M /opt/iobroker/iobroker-data/files/javascript.admin/static/js The five largest files in iobroker-data are: 38M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.d3d286bd.js.map 27M /opt/iobroker/iobroker-data/files/tankerkoenig.admin/build/index.js.map 24M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.135279a0.js.map 16M /opt/iobroker/iobroker-data/objects.jsonl 14M /opt/iobroker/iobroker-data/files/backitup.admin/static/js/main.2cca4954.js USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-Silicon_Labs_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0001-if00-port0 /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_AI03D64S-if00-port0 Your zigbee.0 COM-Port is matching 'by-id'. Very good! *** NodeJS-Installation *** /usr/bin/nodejs v20.18.0 /usr/bin/node v20.18.0 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 /usr/bin/corepack 0.29.3 nodejs: Installed: 20.18.0-1nodesource1 Candidate: 20.18.0-1nodesource1 Version table: *** 20.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 20.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 12.22.12~dfsg-1~deb11u5 500 500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages 12.22.12~dfsg-1~deb11u4 500 500 http://deb.debian.org/debian bullseye/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is not running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 6.0.11 admin: 7.1.5 javascript: 8.8.3 nodejs modules from github: 0 Adapter State system.adapter.admin.0 : admin : IoBroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin system.adapter.alexa2.0 : alexa2 : IoBroker - enabled system.adapter.backitup.0 : backitup : IoBroker - enabled system.adapter.daikin-cloud.0 : daikin-cloud : IoBroker - disabled system.adapter.discovery.0 : discovery : IoBroker - enabled system.adapter.ham.0 : ham : IoBroker - enabled system.adapter.hm-rega.0 : hm-rega : IoBroker - enabled system.adapter.hm-rpc.0 : hm-rpc : IoBroker - enabled system.adapter.hm-rpc.1 : hm-rpc : IoBroker - enabled, port: 0 system.adapter.homeconnect.0 : homeconnect : IoBroker - enabled system.adapter.ical.0 : ical : IoBroker - enabled system.adapter.iot.0 : iot : IoBroker - enabled system.adapter.jarvis.0 : jarvis : IoBroker - enabled system.adapter.javascript.0 : javascript : IoBroker - enabled system.adapter.linux-control.0 : linux-control : IoBroker - enabled system.adapter.meross.0 : meross : IoBroker - enabled system.adapter.mihome-vacuum.0 : mihome-vacuum : IoBroker - enabled, port: 54321 system.adapter.mihome.0 : mihome : IoBroker - disabled, port: 9898, bind: 0.0.0.0 system.adapter.mqtt.0 : mqtt : IoBroker - disabled, port: 1883, bind: 0.0.0.0 system.adapter.netatmo-crawler.0 : netatmo-crawler : IoBroker - enabled system.adapter.rpi2.0 : rpi2 : IoBroker - enabled system.adapter.sonoff.0 : sonoff : IoBroker - enabled, port: 1883, bind: 192.168.178.46 system.adapter.tankerkoenig.0 : tankerkoenig : IoBroker - enabled system.adapter.terminal.0 : terminal : IoBroker - enabled, port: 8088, bind: 0.0.0.0, run as: admin system.adapter.trashschedule.0 : trashschedule : IoBroker - enabled system.adapter.tuya.0 : tuya : IoBroker - enabled system.adapter.web.0 : web : IoBroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin system.adapter.whatsapp-cmb.0 : whatsapp-cmb : IoBroker - enabled system.adapter.whatsapp-cmb.1 : whatsapp-cmb : IoBroker - enabled system.adapter.yeelight-2.0 : yeelight-2 : IoBroker - enabled system.adapter.zigbee.0 : zigbee : IoBroker - enabled, port: /dev/serial/by-id/usb-Silicon_Labs_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0001-if00-port0 + instance is alive Enabled adapters with bindings system.adapter.admin.0 : admin : IoBroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin system.adapter.hm-rpc.1 : hm-rpc : IoBroker - enabled, port: 0 system.adapter.mihome-vacuum.0 : mihome-vacuum : IoBroker - enabled, port: 54321 system.adapter.sonoff.0 : sonoff : IoBroker - enabled, port: 1883, bind: 192.168.178.46 system.adapter.terminal.0 : terminal : IoBroker - enabled, port: 8088, bind: 0.0.0.0, run as: admin system.adapter.web.0 : web : IoBroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin system.adapter.zigbee.0 : zigbee : IoBroker - enabled, port: /dev/serial/by-id/usb-Silicon_Labs_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0001-if00-port0 ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): stable Upgrade policy: none Installed ioBroker-Instances Used repository: stable Adapter "admin" : 7.1.5 , installed 7.1.5 Adapter "alexa2" : 3.26.5 , installed 3.26.5 Adapter "backitup" : 3.0.22 , installed 3.0.22 Adapter "daikin-cloud" : 0.4.8 , installed 0.4.8 Adapter "device-reminder": 3.1.2 , installed 3.1.2 Adapter "discovery" : 5.0.0 , installed 5.0.0 Adapter "ham" : 5.3.1 , installed 5.3.1 Adapter "hm-rega" : 5.0.0 , installed 5.0.0 Adapter "hm-rpc" : 2.0.2 , installed 2.0.2 Adapter "homeconnect" : 1.4.1 , installed 1.4.1 Adapter "ical" : 1.15.0 , installed 1.15.0 Adapter "iot" : 3.3.0 , installed 3.3.0 Adapter "jarvis" : 3.1.8 , installed 3.1.8 Adapter "javascript" : 8.8.3 , installed 8.8.3 Controller "js-controller": 6.0.11 , installed 6.0.11 Adapter "linux-control": 1.1.5 , installed 1.1.5 Adapter "meross" : 1.17.0 , installed 1.17.0 Adapter "mihome" : 1.4.0 , installed 1.4.0 Adapter "mihome-vacuum": 4.2.0 , installed 4.2.0 Adapter "mqtt" : 5.2.0 , installed 5.2.0 Adapter "mqtt-client" : 2.0.0 , installed 2.0.0 Adapter "netatmo-crawler": 0.8.1 , installed 0.8.1 Adapter "rpi2" : 1.3.2 , installed 1.3.2 Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "socketio" : 6.7.1 , installed 6.7.1 Adapter "sonoff" : 3.1.2 , installed 3.1.2 Adapter "tankerkoenig" : 3.4.0 , installed 3.4.0 Adapter "terminal" : 1.0.0 , installed 1.0.0 Adapter "trashschedule": 3.3.0 , installed 3.3.0 Adapter "tuya" : 3.16.0 , installed 3.16.0 Adapter "web" : 6.2.5 , installed 6.2.5 Adapter "whatsapp-cmb" : 0.3.0 , installed 0.3.0 Adapter "ws" : 2.6.2 , installed 2.6.2 Adapter "yeelight-2" : 1.4.0 , installed 1.4.0 Adapter "zigbee" : 1.10.3 , installed 1.10.3 Objects and States Please stand by - This may take a while Objects: 7521 States: 5852 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian bullseye InRelease Hit:2 http://deb.debian.org/debian bullseye-updates InRelease Hit:3 http://security.debian.org/debian-security bullseye-security InRelease Hit:4 http://archive.raspberrypi.org/debian bullseye InRelease Hit:5 https://deb.nodesource.com/node_20.x nodistro InRelease Hit:6 https://apt.pivccu.de/piVCCU stable InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 10.0.3.1:53 0.0.0.0:* LISTEN 0 14606 1044/dnsmasq tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 13147 1036/sshd: /usr/sbi tcp6 0 0 :::22 :::* LISTEN 0 13149 1036/sshd: /usr/sbi udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 12941 433/avahi-daemon: r udp 0 0 10.0.3.1:53 0.0.0.0:* 0 14605 1044/dnsmasq udp 0 0 0.0.0.0:67 0.0.0.0:* 0 14602 1044/dnsmasq udp 0 0 0.0.0.0:68 0.0.0.0:* 0 13052 849/dhclient udp 0 0 0.0.0.0:33135 0.0.0.0:* 108 12943 433/avahi-daemon: r udp6 0 0 :::5353 :::* 108 12942 433/avahi-daemon: r udp6 0 0 :::58117 :::* 108 12944 433/avahi-daemon: r *** Log File - Last 25 Lines *** 2024-10-08 21:11:10.669 - info: host.IoBroker instance system.adapter.admin.0 terminated with code 156 (START_IMMEDIATELY_AFTER_STOP) 2024-10-08 21:11:10.732 - info: host.IoBroker instance system.adapter.alexa2.0 terminated with code 156 (START_IMMEDIATELY_AFTER_STOP) 2024-10-08 21:11:10.733 - info: host.IoBroker instance system.adapter.ham.0 terminated with code 156 (START_IMMEDIATELY_AFTER_STOP) 2024-10-08 21:11:10.734 - info: host.IoBroker instance system.adapter.iot.0 terminated with code 156 (START_IMMEDIATELY_AFTER_STOP) 2024-10-08 21:11:10.747 - info: host.IoBroker instance system.adapter.whatsapp-cmb.1 terminated with code 156 (START_IMMEDIATELY_AFTER_STOP) 2024-10-08 21:11:11.096 - info: host.IoBroker instance system.adapter.javascript.0 terminated with code 156 (START_IMMEDIATELY_AFTER_STOP) 2024-10-08 21:11:11.097 - info: host.IoBroker instance system.adapter.whatsapp-cmb.0 terminated with code 156 (START_IMMEDIATELY_AFTER_STOP) 2024-10-08 21:11:11.097 - info: host.IoBroker instance system.adapter.tankerkoenig.0 terminated with code 156 (START_IMMEDIATELY_AFTER_STOP) 2024-10-08 21:11:11.098 - info: host.IoBroker instance system.adapter.hm-rega.0 terminated with code 156 (START_IMMEDIATELY_AFTER_STOP) 2024-10-08 21:11:11.098 - warn: host.IoBroker instance system.adapter.hm-rpc.0 terminated due to SIGTERM 2024-10-08 21:11:11.098 - info: host.IoBroker instance system.adapter.hm-rpc.0 terminated with code null () 2024-10-08 21:11:11.099 - warn: host.IoBroker instance system.adapter.sonoff.0 terminated due to SIGTERM 2024-10-08 21:11:11.099 - info: host.IoBroker instance system.adapter.sonoff.0 terminated with code null () 2024-10-08 21:11:11.099 - warn: host.IoBroker instance system.adapter.web.0 terminated due to SIGTERM 2024-10-08 21:11:11.100 - info: host.IoBroker instance system.adapter.web.0 terminated with code null () 2024-10-08 21:11:11.100 - warn: host.IoBroker instance system.adapter.zigbee.0 terminated due to SIGTERM 2024-10-08 21:11:11.100 - info: host.IoBroker instance system.adapter.zigbee.0 terminated with code null () 2024-10-08 21:11:11.101 - warn: host.IoBroker instance system.adapter.hm-rpc.1 terminated due to SIGTERM 2024-10-08 21:11:11.101 - info: host.IoBroker instance system.adapter.hm-rpc.1 terminated with code null () 2024-10-08 21:11:11.859 - info: tuya.0 (1498) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason 2024-10-08 21:11:12.433 - info: host.IoBroker instance system.adapter.tuya.0 terminated with code 156 (START_IMMEDIATELY_AFTER_STOP) 2024-10-08 21:11:13.061 - info: meross.0 (1382) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2024-10-08 21:11:13.634 - info: host.IoBroker instance system.adapter.meross.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2024-10-08 21:11:13.635 - info: host.IoBroker All instances are stopped. 2024-10-08 21:11:13.863 - info: host.IoBroker terminated======================= SUMMARY ======================= v.2024-08-12 Static hostname: IoBroker Icon name: computer Operating System: Debian GNU/Linux 11 (bullseye) Kernel: Linux 6.1.21-v8+ Architecture: arm64 Installation: native Kernel: aarch64 Userland: 64 bit Timezone: Europe/Berlin (CEST, +0200) User-ID: 1002 Display-Server: false Boot Target: multi-user.target Pending OS-Updates: 0 Pending iob updates: 0 Nodejs-Installation: /usr/bin/nodejs v20.18.0 /usr/bin/node v20.18.0 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 /usr/bin/corepack 0.29.3 Recommended versions are nodejs 20.18.0 and npm 10.8.2 Your nodejs installation is correct MEMORY: total used free shared buff/cache available Mem: 3.8G 111M 920M 1.0M 2.8G 3.6G Swap: 99M 0B 99M Total: 3.9G 111M 1.0G Active iob-Instances: 1 Upgrade policy: none ioBroker Core: js-controller 6.0.11 admin 7.1.5 ioBroker Status: iobroker is not running on this host. Objects type: jsonl States type: jsonl Status admin and web instance: system.adapter.admin.0 : admin : IoBroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin system.adapter.web.0 : web : IoBroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin Objects: 7521 States: 5852 Size of iob-Database: 16M /opt/iobroker/iobroker-data/objects.jsonl 7.2M /opt/iobroker/iobroker-data/states.jsonl =================== END OF SUMMARY ==================== -
@flowski sagte in Updateschwierigkeiten js-controller 4.0.23:
- iobroker.service loaded failed failed ioBroker Server
iobroker start -
@thomas-braun jetzt ist iobroker, jarvis usw. wieder erreichbar. lediglich homematic steht in den Adaptern auf rot, ne idee?
bash Skript v.2024-08-12 *** BASE SYSTEM *** Static hostname: IoBroker Icon name: computer Operating System: Debian GNU/Linux 11 (bullseye) Kernel: Linux 6.1.21-v8+ Architecture: arm64 OS is similar to: Model : Raspberry Pi 4 Model B Rev 1.2 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 21:47:18 up 1:00, 2 users, load average: 1.69, 1.67, 1.09 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: ~ Under-voltage has occurred ~ Arm frequency capping has occurred ~ Throttling has occurred ~ Soft temperature limit has occurred *** Time and Time Zones *** Local time: Tue 2024-10-08 21:47:18 CEST Universal time: Tue 2024-10-08 19:47:18 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': fabio HOME=/home/fabio GROUPS=fabio sudo iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** Display-Server-Setup *** Display-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 3.8G 1.5G 597M 1.0M 1.7G 2.2G Swap: 99M 0B 99M Total: 3.9G 1.5G 697M Active iob-Instances: 25 3794 M total memory 1542 M used memory 1624 M active memory 1292 M inactive memory 597 M free memory 127 M buffer memory 1526 M swap cache 99 M total swap 0 M used swap 99 M free swap *** top - Table Of Processes *** top - 21:47:19 up 1:00, 2 users, load average: 1.69, 1.67, 1.09 Tasks: 191 total, 1 running, 190 sleeping, 0 stopped, 0 zombie %Cpu(s): 1.4 us, 2.8 sy, 0.0 ni, 95.8 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 3794.3 total, 597.5 free, 1542.4 used, 1654.4 buff/cache MiB Swap: 100.0 total, 100.0 free, 0.0 used. 2175.3 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * pivccu-dkms.service loaded failed failed piVCCU DKMS Modules LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 1 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 59G 8.8G 48G 16% / devtmpfs devtmpfs 1.7G 0 1.7G 0% /dev tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm tmpfs tmpfs 759M 1.2M 758M 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 255M 32M 224M 13% /boot tmpfs tmpfs 380M 0 380M 0% /run/user/1000 tmpfs tmpfs 380M 0 380M 0% /run/user/1002 Messages concerning ext4 filesystem in dmesg: [Tue Oct 8 20:46:56 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=DC:A6:32:5A:83:48 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=tty1 root=PARTUUID=2a0531f8-02 rootfstype=ext4 fsck.repair=yes rootwait [Tue Oct 8 20:46:56 2024] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Tue Oct 8 20:46:56 2024] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Tue Oct 8 20:46:58 2024] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime `-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: du: cannot access '/var/lib/lxcfs/cgroup': Input/output error 3.7G /var/ 2.1G /var/log/journal/664a8e581ec84405863df59a10cf9293 2.1G /var/log/journal 2.1G /var/log 817M /var/lib Hint: You are currently not seeing messages from other users and the system. Users in groups 'adm', 'systemd-journal' can see all messages. Pass -q to turn off this notice. Archived and active journals take up 8.0M in the file system. /opt/iobroker/backups: 58M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 909M /opt/iobroker/iobroker-data/ 840M /opt/iobroker/iobroker-data/files 617M /opt/iobroker/iobroker-data/files/javascript.admin 560M /opt/iobroker/iobroker-data/files/javascript.admin/static 558M /opt/iobroker/iobroker-data/files/javascript.admin/static/js The five largest files in iobroker-data are: 38M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.d3d286bd.js.map 27M /opt/iobroker/iobroker-data/files/tankerkoenig.admin/build/index.js.map 24M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.135279a0.js.map 14M /opt/iobroker/iobroker-data/files/backitup.admin/static/js/main.2cca4954.js 10M /opt/iobroker/iobroker-data/objects.jsonl USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-Silicon_Labs_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0001-if00-port0 /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_AI03D64S-if00-port0 Your zigbee.0 COM-Port is matching 'by-id'. Very good! *** NodeJS-Installation *** /usr/bin/nodejs v20.18.0 /usr/bin/node v20.18.0 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 /usr/bin/corepack 0.29.3 nodejs: Installed: 20.18.0-1nodesource1 Candidate: 20.18.0-1nodesource1 Version table: *** 20.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 20.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 12.22.12~dfsg-1~deb11u5 500 500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages 12.22.12~dfsg-1~deb11u4 500 500 http://deb.debian.org/debian bullseye/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 6.0.11 admin: 7.1.5 javascript: 8.8.3 nodejs modules from github: 0 Adapter State + system.adapter.admin.0 : admin : IoBroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : IoBroker - enabled + system.adapter.backitup.0 : backitup : IoBroker - enabled system.adapter.daikin-cloud.0 : daikin-cloud : IoBroker - disabled + system.adapter.discovery.0 : discovery : IoBroker - enabled + system.adapter.ham.0 : ham : IoBroker - enabled + system.adapter.hm-rega.0 : hm-rega : IoBroker - enabled system.adapter.hm-rpc.0 : hm-rpc : IoBroker - enabled system.adapter.hm-rpc.1 : hm-rpc : IoBroker - enabled, port: 0 + system.adapter.homeconnect.0 : homeconnect : IoBroker - enabled system.adapter.ical.0 : ical : IoBroker - enabled + system.adapter.iot.0 : iot : IoBroker - enabled + system.adapter.jarvis.0 : jarvis : IoBroker - enabled + system.adapter.javascript.0 : javascript : IoBroker - enabled + system.adapter.linux-control.0 : linux-control : IoBroker - enabled + system.adapter.meross.0 : meross : IoBroker - enabled + system.adapter.mihome-vacuum.0 : mihome-vacuum : IoBroker - enabled, port: 54321 system.adapter.mihome.0 : mihome : IoBroker - disabled, port: 9898, bind: 0.0.0.0 system.adapter.mqtt.0 : mqtt : IoBroker - disabled, port: 1883, bind: 0.0.0.0 system.adapter.netatmo-crawler.0 : netatmo-crawler : IoBroker - enabled + system.adapter.rpi2.0 : rpi2 : IoBroker - enabled + system.adapter.sonoff.0 : sonoff : IoBroker - enabled, port: 1883, bind: 192.168.178.46 + system.adapter.tankerkoenig.0 : tankerkoenig : IoBroker - enabled + system.adapter.terminal.0 : terminal : IoBroker - enabled, port: 8088, bind: 0.0.0.0, run as: admin + system.adapter.trashschedule.0 : trashschedule : IoBroker - enabled + system.adapter.tuya.0 : tuya : IoBroker - enabled + system.adapter.web.0 : web : IoBroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.whatsapp-cmb.0 : whatsapp-cmb : IoBroker - enabled + system.adapter.whatsapp-cmb.1 : whatsapp-cmb : IoBroker - enabled + system.adapter.yeelight-2.0 : yeelight-2 : IoBroker - enabled + system.adapter.zigbee.0 : zigbee : IoBroker - enabled, port: /dev/serial/by-id/usb-Silicon_Labs_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0001-if00-port0 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : IoBroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin system.adapter.hm-rpc.1 : hm-rpc : IoBroker - enabled, port: 0 + system.adapter.mihome-vacuum.0 : mihome-vacuum : IoBroker - enabled, port: 54321 + system.adapter.sonoff.0 : sonoff : IoBroker - enabled, port: 1883, bind: 192.168.178.46 + system.adapter.terminal.0 : terminal : IoBroker - enabled, port: 8088, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : IoBroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : IoBroker - enabled, port: /dev/serial/by-id/usb-Silicon_Labs_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0001-if00-port0 ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): stable Upgrade policy: none Installed ioBroker-Instances Used repository: stable Adapter "admin" : 7.1.5 , installed 7.1.5 Adapter "alexa2" : 3.26.5 , installed 3.26.5 Adapter "backitup" : 3.0.22 , installed 3.0.22 Adapter "daikin-cloud" : 0.4.8 , installed 0.4.8 Adapter "device-reminder": 3.1.2 , installed 3.1.2 Adapter "discovery" : 5.0.0 , installed 5.0.0 Adapter "ham" : 5.3.1 , installed 5.3.1 Adapter "hm-rega" : 5.0.0 , installed 5.0.0 Adapter "hm-rpc" : 2.0.2 , installed 2.0.2 Adapter "homeconnect" : 1.4.1 , installed 1.4.1 Adapter "ical" : 1.15.0 , installed 1.15.0 Adapter "iot" : 3.3.0 , installed 3.3.0 Adapter "jarvis" : 3.1.8 , installed 3.1.8 Adapter "javascript" : 8.8.3 , installed 8.8.3 Controller "js-controller": 6.0.11 , installed 6.0.11 Adapter "linux-control": 1.1.5 , installed 1.1.5 Adapter "meross" : 1.17.0 , installed 1.17.0 Adapter "mihome" : 1.4.0 , installed 1.4.0 Adapter "mihome-vacuum": 4.2.0 , installed 4.2.0 Adapter "mqtt" : 5.2.0 , installed 5.2.0 Adapter "mqtt-client" : 2.0.0 , installed 2.0.0 Adapter "netatmo-crawler": 0.8.1 , installed 0.8.1 Adapter "rpi2" : 1.3.2 , installed 1.3.2 Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "socketio" : 6.7.1 , installed 6.7.1 Adapter "sonoff" : 3.1.2 , installed 3.1.2 Adapter "tankerkoenig" : 3.4.0 , installed 3.4.0 Adapter "terminal" : 1.0.0 , installed 1.0.0 Adapter "trashschedule": 3.3.0 , installed 3.3.0 Adapter "tuya" : 3.16.0 , installed 3.16.0 Adapter "web" : 6.2.5 , installed 6.2.5 Adapter "whatsapp-cmb" : 0.3.0 , installed 0.3.0 Adapter "ws" : 2.6.2 , installed 2.6.2 Adapter "yeelight-2" : 1.4.0 , installed 1.4.0 Adapter "zigbee" : 1.10.3 , installed 1.10.3 Objects and States Please stand by - This may take a while Objects: 7600 States: 5939 *** OS-Repositories and Updates *** Hit:1 http://security.debian.org/debian-security bullseye-security InRelease Hit:2 http://deb.debian.org/debian bullseye InRelease Hit:3 http://deb.debian.org/debian bullseye-updates InRelease Hit:4 http://archive.raspberrypi.org/debian bullseye InRelease Hit:5 https://apt.pivccu.de/piVCCU stable InRelease Hit:6 https://deb.nodesource.com/node_20.x nodistro InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 192.168.178.46:1883 0.0.0.0:* LISTEN 1001 38656 11108/io.sonoff.0 tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 35395 10803/iobroker.js-c tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 36274 10803/iobroker.js-c tcp 0 0 10.0.3.1:53 0.0.0.0:* LISTEN 0 14606 1044/dnsmasq tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 13147 1036/sshd: /usr/sbi tcp 0 0 0.0.0.0:8400 0.0.0.0:* LISTEN 1001 39945 11336/io.jarvis.0 tcp6 0 0 :::8088 :::* LISTEN 1001 37795 11464/io.terminal.0 tcp6 0 0 :::8081 :::* LISTEN 1001 35443 10826/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1001 38884 11317/io.web.0 tcp6 0 0 :::22 :::* LISTEN 0 13149 1036/sshd: /usr/sbi udp 0 0 0.0.0.0:5353 0.0.0.0:* 1001 41098 11184/io.ham.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 12941 433/avahi-daemon: r udp 0 0 10.0.3.1:53 0.0.0.0:* 0 14605 1044/dnsmasq udp 0 0 0.0.0.0:67 0.0.0.0:* 0 14602 1044/dnsmasq udp 0 0 0.0.0.0:68 0.0.0.0:* 0 13052 849/dhclient udp 0 0 0.0.0.0:53421 0.0.0.0:* 1001 35719 11093/io.mihome-vac udp 0 0 0.0.0.0:33135 0.0.0.0:* 108 12943 433/avahi-daemon: r udp 0 0 0.0.0.0:6666 0.0.0.0:* 1001 37615 11234/io.tuya.0 udp 0 0 0.0.0.0:6667 0.0.0.0:* 1001 37616 11234/io.tuya.0 udp6 0 0 :::5353 :::* 108 12942 433/avahi-daemon: r udp6 0 0 :::58117 :::* 108 12944 433/avahi-daemon: r *** Log File - Last 25 Lines *** 2024-10-08 21:47:30.711 - error: hm-rega.0 (10994) CCU 192.168.178.47 unreachable 2024-10-08 21:47:33.801 - info: netatmo-crawler.0 (12424) starting. Version 0.8.1 in /opt/iobroker/node_modules/iobroker.netatmo-crawler, node: v20.18.0, js-controller: 6.0.11 2024-10-08 21:47:33.907 - info: netatmo-crawler.0 (12424) Getting data for stationid:70:ee:50:22:e4:6e 2024-10-08 21:47:34.887 - info: netatmo-crawler.0 (12424) Terminated (ADAPTER_REQUESTED_TERMINATION): Everything done. Going to terminate till next schedule 2024-10-08 21:47:35.441 - info: host.IoBroker instance system.adapter.netatmo-crawler.0 having pid 12424 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2024-10-08 21:47:50.799 - info: hm-rpc.1 (12180) xmlrpc -> 192.168.178.47:2010/ init ["http://192.168.178.46:2010",""] 2024-10-08 21:47:50.799 - info: hm-rpc.0 (12186) xmlrpc -> 192.168.178.47:2001/ init ["http://192.168.178.46:2001",""] 2024-10-08 21:47:50.807 - error: hm-rpc.1 (12180) Init not possible, going to stop: connect EHOSTUNREACH 192.168.178.47:2010 2024-10-08 21:47:50.809 - error: hm-rpc.0 (12186) Init not possible, going to stop: connect EHOSTUNREACH 192.168.178.47:2001 2024-10-08 21:47:50.808 - warn: hm-rpc.1 (12180) setTimeout called, but adapter is shutting down 2024-10-08 21:47:50.810 - warn: hm-rpc.0 (12186) setTimeout called, but adapter is shutting down 2024-10-08 21:47:51.812 - info: hm-rpc.1 (12180) terminating 2024-10-08 21:47:51.814 - info: hm-rpc.1 (12180) Terminated (NO_ERROR): Without reason 2024-10-08 21:47:51.821 - info: hm-rpc.0 (12186) terminating 2024-10-08 21:47:51.823 - info: hm-rpc.0 (12186) Terminated (NO_ERROR): Without reason 2024-10-08 21:47:52.477 - info: host.IoBroker instance system.adapter.hm-rpc.1 terminated with code 0 (NO_ERROR) 2024-10-08 21:47:52.479 - info: host.IoBroker Restart adapter system.adapter.hm-rpc.1 because enabled 2024-10-08 21:47:52.538 - info: host.IoBroker instance system.adapter.hm-rpc.0 terminated with code 0 (NO_ERROR) 2024-10-08 21:47:52.538 - info: host.IoBroker Restart adapter system.adapter.hm-rpc.0 because enabled 2024-10-08 21:48:00.110 - info: host.IoBroker instance system.adapter.netatmo-crawler.0 in version "0.8.1" started with pid 12970 2024-10-08 21:48:03.799 - error: hm-rega.0 (10994) CCU 192.168.178.47 unreachable 2024-10-08 21:48:04.085 - info: netatmo-crawler.0 (12970) starting. Version 0.8.1 in /opt/iobroker/node_modules/iobroker.netatmo-crawler, node: v20.18.0, js-controller: 6.0.11 2024-10-08 21:48:04.178 - info: netatmo-crawler.0 (12970) Getting data for stationid:70:ee:50:22:e4:6e 2024-10-08 21:48:05.463 - info: netatmo-crawler.0 (12970) Terminated (ADAPTER_REQUESTED_TERMINATION): Everything done. Going to terminate till next schedule 2024-10-08 21:48:06.020 - info: host.IoBroker instance system.adapter.netatmo-crawler.0 having pid 12970 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) -
@flowski sagte in Updateschwierigkeiten js-controller 4.0.23:
- pivccu-dkms.service loaded failed failed piVCCU DKMS Modules
Hat das mit homematic zu tun? Kenn mich in dem Bereich aber auch Null aus.
-
@thomas-braun mir wurde damals eine virtuelle ccu aufgespielt? das sollte es sein
-
Wie gesagt, mit pivCCU und Co. kenn ich mich nicht aus.
Muss sich wohl wer anders anschauen.
Mach am besten einen neuen Thread mit eigener Beschreibung dazu auf.
Da kannst du auch die Ausgabe vonsystemctl status pivccu-dkmsposten.
-
@thomas-braun said in Updateschwierigkeiten js-controller 4.0.23:
systemctl status pivccu-dkms
Ok werde ich machen. Nochmal tausend Dank für deinen Support, hast mir sehr geholfen.. dann mache ich mal einen neuen Beitrag auf.
Schönen Abend
