Owntracks läuft nicht mehr richtig nach Fritzbox tausch
-
Hallo,
nach dem ich meine Fritz Box letzte Woche getauscht hatte (wegen Abbrüchen durch 1u1 Angeordnet)
habe ich nun Problem Owntracks mit DynDNS und Port Freigabe wieder richtig zum laufen zu kommen.
nachfolgend sind Bilder davon.
ich habe es nun schon mehrfach versucht neu einzurichten, die Freigaben neu gesetzt, den DynDNS anbieder sogar gewechselt von No-IP zu Selfhost.
aber immer noch überträgt die App keine Daten und und bekommt von Iobroker die Richtigen Bilder usw.
App und Fritz Box und IoBroker sind auch schon mehrfach Neugestartet worden.Habe ich was falsch Konfiguriert?
bevor ich die Fritz Box tauschte lief alles wunderbar bis auf die Verbindungsabbrüche halt..... -
Hier ein Auszug aus dem LOG
2024-11-10 08:12:15.143 I [DefaultDispatcher-worker-4] MQTTReconnectWorker: MQTT reconnect worker job started 2024-11-10 08:12:15.155 I [DefaultDispatcher-worker-4] MQTTMessageProcessorEndpoint$connectToBroker: Connecting to tcp://mqttowntracks.ddns.net:1884?# timeout = 30s 2024-11-10 08:12:15.216 E [DefaultDispatcher-worker-4] MQTTMessageProcessorEndpoint$connectToBroker: MQTT client unable to connect to endpoint: failed to connect to mqttowntracks.ddns.net/92.116.121.27 (port 1884) from /192.168.178.21 (port 57118) after 30000ms: isConnected failed: EHOSTUNREACH (No route to host) 2024-11-10 08:12:15.218 I [DefaultDispatcher-worker-4] MQTTReconnectWorker: MQTT reconnect worker job completed, status Retry 2024-11-10 08:16:53.380 I [DefaultDispatcher-worker-2] MQTTMessageProcessorEndpoint$connectToBroker: Connecting to tcp://mqttowntracks.ddns.net:1884?# timeout = 30s 2024-11-10 08:16:53.586 E [DefaultDispatcher-worker-2] MQTTMessageProcessorEndpoint$connectToBroker: MQTT client unable to connect to endpoint: failed to connect to mqttowntracks.ddns.net/92.116.121.27 (port 1884) from /10.129.245.245 (port 48218) after 30000ms: isConnected failed: EHOSTUNREACH (No route to host) 2024-11-10 08:17:03.621 I [DefaultDispatcher-worker-5] MQTTReconnectWorker: MQTT reconnect worker job started 2024-11-10 08:17:03.635 I [DefaultDispatcher-worker-5] MQTTMessageProcessorEndpoint$connectToBroker: Connecting to tcp://mqttowntracks.ddns.net:1884?# timeout = 30s 2024-11-10 08:17:03.689 E [DefaultDispatcher-worker-5] MQTTMessageProcessorEndpoint$connectToBroker: MQTT client unable to connect to endpoint: failed to connect to mqttowntracks.ddns.net/92.116.121.27 (port 1884) from /10.129.245.245 (port 59780) after 30000ms: isConnected failed: EHOSTUNREACH (No route to host) 2024-11-10 08:17:03.691 I [DefaultDispatcher-worker-5] MQTTReconnectWorker: MQTT reconnect worker job completed, status Retry 2024-11-10 08:17:13.713 I [DefaultDispatcher-worker-5] MQTTReconnectWorker: MQTT reconnect worker job started 2024-11-10 08:17:13.717 I [DefaultDispatcher-worker-5] MQTTMessageProcessorEndpoint$connectToBroker: Connecting to tcp://mqttowntracks.ddns.net:1884?# timeout = 30s 2024-11-10 08:17:13.766 E [DefaultDispatcher-worker-5] MQTTMessageProcessorEndpoint$connectToBroker: MQTT client unable to connect to endpoint: failed to connect to mqttowntracks.ddns.net/92.116.121.27 (port 1884) from /10.129.245.245 (port 33126) after 30000ms: isConnected failed: EHOSTUNREACH (No route to host) 2024-11-10 08:17:13.766 I [DefaultDispatcher-worker-5] MQTTReconnectWorker: MQTT reconnect worker job completed, status Retry 2024-11-10 08:17:33.780 I [DefaultDispatcher-worker-4] MQTTReconnectWorker: MQTT reconnect worker job started 2024-11-10 08:17:33.793 I [DefaultDispatcher-worker-4] MQTTMessageProcessorEndpoint$connectToBroker: Connecting to tcp://mqttowntracks.ddns.net:1884?# timeout = 30s 2024-11-10 08:17:33.937 E [DefaultDispatcher-worker-4] MQTTMessageProcessorEndpoint$connectToBroker: MQTT client unable to connect to endpoint: failed to connect to mqttowntracks.ddns.net/92.116.121.27 (port 1884) from /192.168.178.21 (port 53130) after 30000ms: isConnected failed: EHOSTUNREACH (No route to host) 2024-11-10 08:17:33.938 I [DefaultDispatcher-worker-4] MQTTReconnectWorker: MQTT reconnect worker job completed, status Retry 2024-11-10 08:17:51.459 W [main] MapFragment: unable to update marker for Contact owntracks/iobroker/Marco (Marco). no location 2024-11-10 08:17:51.459 W [main] MapFragment: unable to update marker for Contact owntracks/iobroker/Melli (Melli). no location 2024-11-10 08:17:51.536 W [main] MapFragment: unable to update marker for Contact owntracks/iobroker/Marco (Marco). no location 2024-11-10 08:17:51.537 W [main] MapFragment: unable to update marker for Contact owntracks/iobroker/Melli (Melli). no location 2024-11-10 08:18:03.950 I [DefaultDispatcher-worker-4] MQTTReconnectWorker: MQTT reconnect worker job started 2024-11-10 08:18:03.955 I [DefaultDispatcher-worker-4] MQTTMessageProcessorEndpoint$connectToBroker: Connecting to tcp://mqttowntracks.ddns.net:1884?# timeout = 30s 2024-11-10 08:18:03.981 E [DefaultDispatcher-worker-4] MQTTMessageProcessorEndpoint$connectToBroker: MQTT client unable to connect to endpoint: failed to connect to mqttowntracks.ddns.net/92.116.121.27 (port 1884) from /192.168.178.21 (port 58718) after 30000ms: isConnected failed: EHOSTUNREACH (No route to host) 2024-11-10 08:18:03.982 I [DefaultDispatcher-worker-4] MQTTReconnectWorker: MQTT reconnect worker job completed, status Retry 2024-11-10 08:18:44.055 I [DefaultDispatcher-worker-4] MQTTReconnectWorker: MQTT reconnect worker job started 2024-11-10 08:18:44.070 I [DefaultDispatcher-worker-4] MQTTMessageProcessorEndpoint$connectToBroker: Connecting to tcp://mqttowntracks.ddns.net:1884?# timeout = 30s 2024-11-10 08:18:44.175 E [DefaultDispatcher-worker-4] MQTTMessageProcessorEndpoint$connectToBroker: MQTT client unable to connect to endpoint because the connection was lost java.net.SocketException: No route to host at java.net.SocketInputStream.socketRead0(Native Method) at java.net.SocketInputStream.socketRead(SocketInputStream.java:118) at java.net.SocketInputStream.read(SocketInputStream.java:173) at java.net.SocketInputStream.read(SocketInputStream.java:143) at java.net.SocketInputStream.read(SocketInputStream.java:205) at java.io.DataInputStream.readByte(DataInputStream.java:273) at org.eclipse.paho.client.mqttv3.internal.wire.MqttInputStream.readMqttWireMessage(SourceFile:14) at org.eclipse.paho.client.mqttv3.internal.CommsSender.run(SourceFile:88) at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:487) at java.util.concurrent.FutureTask.run(FutureTask.java:264) at java.util.concurrent.ScheduledThreadPoolExecutor$ScheduledFutureTask.run(ScheduledThreadPoolExecutor.java:307) at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1145) at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:644) at java.lang.Thread.run(Thread.java:1012) 2024-11-10 08:18:44.176 I [DefaultDispatcher-worker-4] MQTTReconnectWorker: MQTT reconnect worker job completed, status Retry 2024-11-10 08:19:34.215 I [DefaultDispatcher-worker-7] MQTTReconnectWorker: MQTT reconnect worker job started 2024-11-10 08:19:34.239 I [DefaultDispatcher-worker-7] MQTTMessageProcessorEndpoint$connectToBroker: Connecting to tcp://mqttowntracks.ddns.net:1884?# timeout = 30s 2024-11-10 08:19:34.286 E [DefaultDispatcher-worker-7] MQTTMessageProcessorEndpoint$connectToBroker: MQTT client unable to connect to endpoint: failed to connect to mqttowntracks.ddns.net/92.116.121.27 (port 1884) from /192.168.178.21 (port 37168) after 30000ms: isConnected failed: EHOSTUNREACH (No route to host) 2024-11-10 08:19:34.288 I [DefaultDispatcher-worker-7] MQTTReconnectWorker: MQTT reconnect worker job completed, status Retry 2024-11-10 08:20:35.979 I [DefaultDispatcher-worker-7] MQTTReconnectWorker: MQTT reconnect worker job started 2024-11-10 08:20:36.000 I [DefaultDispatcher-worker-7] MQTTMessageProcessorEndpoint$connectToBroker: Connecting to tcp://mqttowntracks.ddns.net:1884?# timeout = 30s 2024-11-10 08:20:36.161 E [DefaultDispatcher-worker-7] MQTTMessageProcessorEndpoint$connectToBroker: MQTT client unable to connect to endpoint: failed to connect to mqttowntracks.ddns.net/92.116.121.27 (port 1884) from /192.168.178.21 (port 56482) after 30000ms: isConnected failed: EHOSTUNREACH (No route to host) 2024-11-10 08:20:36.165 I [DefaultDispatcher-worker-7] MQTTReconnectWorker: MQTT reconnect worker job completed, status Retry 2024-11-10 08:21:50.049 I [DefaultDispatcher-worker-7] MQTTReconnectWorker: MQTT reconnect worker job started 2024-11-10 08:21:50.061 I [DefaultDispatcher-worker-7] MQTTMessageProcessorEndpoint$connectToBroker: Connecting to tcp://mqttowntracks.ddns.net:1884?# timeout = 30s 2024-11-10 08:21:50.134 E [DefaultDispatcher-worker-7] MQTTMessageProcessorEndpoint$connectToBroker: MQTT client unable to connect to endpoint: failed to connect to mqttowntracks.ddns.net/92.116.121.27 (port 1884) from /192.168.178.21 (port 54264) after 30000ms: isConnected failed: EHOSTUNREACH (No route to host) 2024-11-10 08:21:50.136 I [DefaultDispatcher-worker-7] MQTTReconnectWorker: MQTT reconnect worker job completed, status Retry 2024-11-10 08:22:46.160 W [main] MapFragment: unable to update marker for Contact owntracks/iobroker/Marco (Marco). no location 2024-11-10 08:22:46.160 W [main] MapFragment: unable to update marker for Contact owntracks/iobroker/Melli (Melli). no location 2024-11-10 08:22:46.161 W [main] MapViewModel: no location available 2024-11-10 08:22:46.220 I [main] PreferencesStore: Setting default preference value for locatorPriority to null 2024-11-10 08:22:46.228 W [main] MapFragment: unable to update marker for Contact owntracks/iobroker/Marco (Marco). no location 2024-11-10 08:22:46.228 W [main] MapFragment: unable to update marker for Contact owntracks/iobroker/Melli (Melli). no location 2024-11-10 08:22:49.516 W [main] MapViewModel: no location available 2024-11-10 08:23:10.169 I [DefaultDispatcher-worker-5] MQTTReconnectWorker: MQTT reconnect worker job started 2024-11-10 08:23:10.181 I [DefaultDispatcher-worker-4] MQTTMessageProcessorEndpoint$connectToBroker: Connecting to tcp://mqttowntracks.ddns.net:1884?# timeout = 30s 2024-11-10 08:23:10.729 I [DefaultDispatcher-worker-4] MQTTMessageProcessorEndpoint$connectToBroker: MQTT Connected. Subscribing to [owntracks/+/+, owntracks/+/+/event, owntracks/+/+/info, owntracks/+/+/status, owntracks/iobroker/Marco/cmd] 2024-11-10 08:23:10.735 I [DefaultDispatcher-worker-4] MQTTMessageProcessorEndpoint$connectToBroker: MQTT Subscribed 2024-11-10 08:23:10.736 I [DefaultDispatcher-worker-4] MQTTReconnectWorker: MQTT reconnect worker job completed, status Success {mOutputData=Data {}} 2024-11-10 08:23:10.956 I [MQTT Call: iobrokermarco] MessageProcessor: Received incoming message: MessageCard on owntracks/iobroker/Marco/info with id=b8c122ac 2024-11-10 08:23:10.958 W [main] MapFragment: unable to update marker for Contact owntracks/iobroker/Marco (Marco). no location 2024-11-10 08:23:10.959 I [MQTT Call: iobrokermarco] MessageProcessor: Received incoming message: MessageCard on owntracks/iobroker/Melli/info with id=48302f14 2024-11-10 08:23:10.959 W [main] MapFragment: unable to update marker for Contact owntracks/iobroker/Melli (Melli). no location 2024-11-10 08:23:11.052 I [main] PreferencesStore: Setting default preference value for locatorPriority to null 2024-11-10 08:23:13.030 I [DefaultDispatcher-worker-4] MQTTMessageProcessorEndpoint$connectToBroker: Connecting to tcp://mqttowntracks.ddns.net:1884?# timeout = 30s 2024-11-10 08:23:13.379 I [DefaultDispatcher-worker-4] MQTTMessageProcessorEndpoint$connectToBroker: MQTT Connected. Subscribing to [owntracks/+/+, owntracks/+/+/event, owntracks/+/+/info, owntracks/+/+/status, owntracks/iobroker/Marco/cmd] 2024-11-10 08:23:13.387 I [DefaultDispatcher-worker-4] MQTTMessageProcessorEndpoint$connectToBroker: MQTT Subscribed 2024-11-10 08:23:13.604 I [MQTT Call: iobrokermarco] MessageProcessor: Received incoming message: MessageCard on owntracks/iobroker/Marco/info with id=efee084e 2024-11-10 08:23:13.614 I [MQTT Call: iobrokermarco] MessageProcessor: Received incoming message: MessageCard on owntracks/iobroker/Melli/info with id=5bf5e4bb 2024-11-10 08:26:04.980 I [DefaultDispatcher-worker-4] MQTTMessageProcessorEndpoint$connectToBroker: Connecting to tcp://mqttowntracks.ddns.net:1884?# timeout = 30s 2024-11-10 08:26:05.471 I [DefaultDispatcher-worker-4] MQTTMessageProcessorEndpoint$connectToBroker: MQTT Connected. Subscribing to [owntracks/+/+, owntracks/+/+/event, owntracks/+/+/info, owntracks/+/+/status, owntracks/iobroker/Marco/cmd] 2024-11-10 08:26:05.604 I [DefaultDispatcher-worker-4] MQTTMessageProcessorEndpoint$connectToBroker: MQTT Subscribed 2024-11-10 08:26:05.827 I [MQTT Call: iobrokermarco] MessageProcessor: Received incoming message: MessageCard on owntracks/iobroker/Marco/info with id=26b7bd1b 2024-11-10 08:26:05.833 I [MQTT Call: iobrokermarco] MessageProcessor: Received incoming message: MessageCard on owntracks/iobroker/Melli/info with id=ef2f2971 2024-11-10 08:57:23.737 I [main] PreferencesStore: Setting default preference value for locatorPriority to null 2024-11-10 08:57:47.952 E [main] MQTTMessageProcessorEndpoint$mqttCallback: Connection Lost Zeitlimitüberschreitung beim Warten auf eine Antwort vom Server (32000) at kotlin.ranges.RangesKt.createMqttException(SourceFile:10) at org.eclipse.paho.client.mqttv3.internal.ClientState.checkForActivity(SourceFile:120) at org.owntracks.android.net.mqtt.MQTTPingAlarmReceiver.onReceive(SourceFile:53) at android.app.LoadedApk$ReceiverDispatcher$Args.lambda$getRunnable$0(LoadedApk.java:1842) at android.app.LoadedApk$ReceiverDispatcher$Args.$r8$lambda$gDuJqgxY6Zb-ifyeubKeivTLAwk(Unknown Source:0) at android.app.LoadedApk$ReceiverDispatcher$Args$$ExternalSyntheticLambda0.run(Unknown Source:2) at android.os.Handler.handleCallback(Handler.java:958) at android.os.Handler.dispatchMessage(Handler.java:99) at android.os.Looper.loopOnce(Looper.java:224) at android.os.Looper.loop(Looper.java:318) at android.app.ActivityThread.main(ActivityThread.java:8759) at java.lang.reflect.Method.invoke(Native Method) at com.android.internal.os.RuntimeInit$MethodAndArgsCaller.run(RuntimeInit.java:561) at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:1013) 2024-11-10 08:57:57.894 I [DefaultDispatcher-worker-4] MQTTMessageProcessorEndpoint$connectToBroker: Connecting to tcp://mqttowntracks.ddns.net:1884?# timeout = 30s 2024-11-10 08:57:57.965 I [DefaultDispatcher-worker-7] MQTTReconnectWorker: MQTT reconnect worker job started 2024-11-10 08:57:58.352 I [DefaultDispatcher-worker-4] MQTTMessageProcessorEndpoint$connectToBroker: MQTT Connected. Subscribing to [owntracks/+/+, owntracks/+/+/event, owntracks/+/+/info, owntracks/+/+/status, owntracks/iobroker/Marco/cmd] 2024-11-10 08:57:58.357 I [DefaultDispatcher-worker-4] MQTTMessageProcessorEndpoint$connectToBroker: MQTT Subscribed 2024-11-10 08:57:58.363 I [DefaultDispatcher-worker-4] MQTTMessageProcessorEndpoint$connectToBroker: Connecting to tcp://mqttowntracks.ddns.net:1884?# timeout = 30s 2024-11-10 08:57:58.698 I [DefaultDispatcher-worker-4] MQTTMessageProcessorEndpoint$connectToBroker: MQTT Connected. Subscribing to [owntracks/+/+, owntracks/+/+/event, owntracks/+/+/info, owntracks/+/+/status, owntracks/iobroker/Marco/cmd] 2024-11-10 08:57:58.703 I [DefaultDispatcher-worker-4] MQTTMessageProcessorEndpoint$connectToBroker: MQTT Subscribed 2024-11-10 08:57:58.704 I [DefaultDispatcher-worker-4] MQTTReconnectWorker: MQTT reconnect worker job completed, status Success {mOutputData=Data {}} 2024-11-10 08:57:58.931 I [MQTT Call: iobrokermarco] MessageProcessor: Received incoming message: MessageCard on owntracks/iobroker/Marco/info with id=64a4ce57 2024-11-10 08:57:58.932 I [MQTT Call: iobrokermarco] MessageProcessor: Received incoming message: MessageCard on owntracks/iobroker/Melli/info with id=7f8cfad7 2024-11-10 08:58:02.511 W [main] MapFragment: unable to update marker for Contact owntracks/iobroker/Marco (Marco). no location 2024-11-10 08:58:02.511 W [main] MapFragment: unable to update marker for Contact owntracks/iobroker/Melli (Melli). no location 2024-11-10 08:58:02.570 W [main] MapFragment: unable to update marker for Contact owntracks/iobroker/Marco (Marco). no location 2024-11-10 08:58:02.570 W [main] MapFragment: unable to update marker for Contact owntracks/iobroker/Melli (Melli). no location 2024-11-10 08:58:04.350 I [DefaultDispatcher-worker-3] MQTTMessageProcessorEndpoint: Sending message [MessageStatus android=org.owntracks.android.model.messages.AddMessageStatus@cecf186] 2024-11-10 08:58:04.352 I [DefaultDispatcher-worker-4] MQTTMessageProcessorEndpoint$sendMessage$2$1$job: Message [MessageStatus android=org.owntracks.android.model.messages.AddMessageStatus@cecf186] dispatched in 1.321458ms 2024-11-10 08:58:04.382 I [MQTT Call: iobrokermarco] MessageProcessor: Received incoming message: MessageStatus on owntracks/iobroker/Marco/status with id=8c71feaf 2024-11-10 08:58:05.188 I [DefaultDispatcher-worker-3] MQTTMessageProcessorEndpoint: Sending message [MessageStatus android=org.owntracks.android.model.messages.AddMessageStatus@c813541] 2024-11-10 08:58:05.189 I [DefaultDispatcher-worker-4] MQTTMessageProcessorEndpoint$sendMessage$2$1$job: Message [MessageStatus android=org.owntracks.android.model.messages.AddMessageStatus@c813541] dispatched in 463.698us 2024-11-10 08:58:05.231 I [MQTT Call: iobrokermarco] MessageProcessor: Received incoming message: MessageStatus on owntracks/iobroker/Marco/status with id=a0be1f1c 2024-11-10 08:58:06.641 I [main] PreferencesStore: Setting default preference value for locatorPriority to null -
@rebel85 Port durchgereicht? Passphrase in der App eingetragen? Da das Problem erst nach Tausch der FB auftrat, kommt für mich nur eine Einstellung in FB in Frage. Und das wäre für mich der Port.
Ro75.
-
@ro75 sagte in Owntracks läuft nicht mehr richtig nach Fritzbox tausch:
@rebel85 Port durchgereicht? Passphrase in der App eingetragen? Da das Problem erst nach Tausch der FB auftrat, kommt für mich nur eine Einstellung in FB in Frage. Und das wäre für mich der Port.
Ro75.
so hab im log noch mal neu eingefügt, und aktuell,
-
Im Log
Connecting to tcp://mqttowntracks.ddns.net:1884?Im Smartphone
Die Ports. Kontrolliere diese.
Ro75.
-
@ro75 ja warte ich aktualisiere.... hab alles wieder auf no-ip gesetzt.
-
@rebel85 bitte nicht die Posts bearbeiten. Da sieht man nicht was du änderst und man hat keine Lust alles neu zu lesen und nachzudenken was nun der Unterschied ist. Das ist nicht produktiv.
Ro75.
-
@ro75 ich hatte es mit selfhost versucht und mit No-IP wie ich es vor dem Fritzbox Tausch hatte.
habe nur den DYNDNS Anbieter gewechselt und die ips kontrolliert.
bei dem log hatte ich einen falschen absatz kopiert und nicht den aktuellen. -
@rebel85 ändert aber nichts
2024-11-10 08:12:15.155 I [DefaultDispatcher-worker-4] MQTTMessageProcessorEndpoint$connectToBroker: Connecting to tcp://mqttowntracks.ddns.net:1884?# timeout = 30sPort 1884 oder 1886? So klappt das nicht.
Ro75.
EDIT: Und wenn du den Dyndns Anbieter wechselst, musst du den auch überall anpassen.
EDIT 2 : Was ist mit der Portweiterleitung in der FB?
-
Hier die Fritzbox Portfreigebe und der Verweis auf No-IP
das Ziel die IPv4 ist bei beiden gleich
-
@ro75
Port 1884 wie es vorm wechsel funktionierte,
Anbieter in der Owntracks App angepasst, und in der Fritzbox unter dyndns -
@rebel85 Und der Port in der App?
Ro75.
-
@ro75 Port 1884
muss ich in der fritzbox noch unter einem anderen menü punkt irgendwas anhaken das ich von außen wieder über dir Fritzbox auf den IoBroker komme?
iobroker läuft, wie vorher auch, als VM auf einem Proxmox System
-
@rebel85 was ist mit dem Port 1884 in der App? ist das geklärt? Was ist mit der Portweiterleitung 1884 in der FB an das Proxmox Zeug?
Ro75.
-
@ro75 in der APP ist der Port 1884
ist schon zu dem Zeitpunkt gewesen wie es im log steht.Was ist mit der Portweiterleitung 1884 in der FB an das Proxmox Zeug?
das ist doch der screenshot, die VM hat ihre eigene IP und die hat auch wie vorher wieder die Port Freigabe 1884 bekommen mit der selben IP wie bei No-IP.
-
ich hab mir noch mal die Anleitung von no-IP angeschaut und das dort wie beschrieben angepasst. 9:40
https://www.noip.com/support/knowledgebase/configuring-ddns-fritzbox
Auf dem Handy will er sich nun Verbinden und kommt nicht weiter , oder muss ich die fritze noch mal neu starten?
-
@rebel85 nutzt du den seaparaten MQTT oder den internen MQTT?
Ro75.
-
@ro75
ich nutze den Adapter im iobroker und der lief die letzten Jahre problemlos, auch nach einem Handy wechsel. Einfach die Config gespeichert, neugeladen auf dem Handy und alles war schön.
nur nicht bei dem FGritzboxwechsel.
Anfangs hatte ich auch Probleme (vor 4 Jahren) das zum laufen zu bekommen, habe auch schon in meinen gespeicherten Daten geschaut aber nichts gefunden. -
@rebel85 was ist mit der Passphrase?
Ro75.
-
@rebel85 Config fehler....
nun hat er sich verbunden, in der APP muss ja der NO-IP Web Host stehen und in der Fritze die Log in daten für den WEB Host.
komme aber immer noch nicht weiter,
Berreiche mal Verlassen?
Fritzbox noch mal Neustarten? in dieser Woche bestimmt schon 15 mal passiert inkl. Zwangstrennung.Port Weiterleitung sollte doch so richtig sein mit TCP oder?
