Zigbee Adapter schmeißt warnungen
-
Hallo und guten Abend.
Mein Zigbee Adapter V 2.0.5 Gibt bei jedem Start Warnungen aus.
zigbee.0 2025-06-25 20:16:20.380 warn ELEVATED:I02 (1a87) value generated '100' from device ffffb40e060599a0 for 'Battery percent' zigbee.0 2025-06-25 20:16:20.379 warn ELEVATED:I01 (1a87) message received '{"battery":100}' from device ffffb40e060599a0 type '3RSM0147Z' zigbee.0 2025-06-25 20:16:20.378 warn ELEVATED:I02 (1a87) value generated '225' from device ffffb40e060599a0 for 'Link quality' zigbee.0 2025-06-25 20:16:20.377 warn ELEVATED:I01 (1a87) message received '{"linkquality":225}' from device ffffb40e060599a0 type '3RSM0147Z' zigbee.0 2025-06-25 20:16:20.373 warn ELEVATED:NOVAL (1a83) No value published for device ffffb40e060599a0 zigbee.0 2025-06-25 20:16:20.373 warn ELEVATED:I01 (1a83) message received '{}' from device ffffb40e060599a0 type '3RSM0147Z' zigbee.0 2025-06-25 20:16:20.371 warn ELEVATED:I02 (1a83) value generated '225' from device ffffb40e060599a0 for 'Link quality' zigbee.0 2025-06-25 20:16:20.371 warn ELEVATED:I01 (1a83) message received '{"linkquality":225}' from device ffffb40e060599a0 type '3RSM0147Z' zigbee.0 2025-06-25 20:16:20.367 warn ELEVATED:I02 (1a7b) value generated '0' from device ffffb40e060599a0 for 'Humidity' zigbee.0 2025-06-25 20:16:20.367 warn ELEVATED:I01 (1a7b) message received '{"humidity":0}' from device ffffb40e060599a0 type '3RSM0147Z' zigbee.0 2025-06-25 20:16:20.366 warn ELEVATED:I02 (1a7b) value generated '225' from device ffffb40e060599a0 for 'Link quality' zigbee.0 2025-06-25 20:16:20.366 warn ELEVATED:I01 (1a7b) message received '{"linkquality":225}' from device ffffb40e060599a0 type '3RSM0147Z' zigbee.0 2025-06-25 20:16:20.365 warn ELEVATED:I02 (1a79) value generated '30.81' from device ffffb40e060599a0 for 'Temperature' zigbee.0 2025-06-25 20:16:20.365 warn ELEVATED:I01 (1a79) message received '{"temperature":30.81}' from device ffffb40e060599a0 type '3RSM0147Z' zigbee.0 2025-06-25 20:16:20.363 warn ELEVATED:I02 (1a79) value generated '225' from device ffffb40e060599a0 for 'Link quality' zigbee.0 2025-06-25 20:16:20.362 warn ELEVATED:I01 (1a79) message received '{"linkquality":225}' from device ffffb40e060599a0 type '3RSM0147Z' zigbee.0 2025-06-25 20:16:20.359 warn ELEVATED:I01 (1a87) Zigbee Event of Type attributeReport from device 0xffffb40e060599a0, incoming event: {"type":"attributeReport","data":{"batteryPercentageRemaining":200},"linkquality":225,"groupID":0,"cluster":"genPowerCfg","meta":{"zclTransactionSequenceNumber":211,"frameControl":{"frameType":0,"manufacturerSpecific":false,"direction":1,"disableDefaultResponse":true,"reservedBits":0}},"endpoint_id":1} zigbee.0 2025-06-25 20:16:20.356 warn ELEVATED:I01 (1a83) Zigbee Event of Type attributeReport from device 0xffffb40e060599a0, incoming event: {"type":"attributeReport","data":{"batteryVoltage":16},"linkquality":225,"groupID":0,"cluster":"genPowerCfg","meta":{"zclTransactionSequenceNumber":210,"frameControl":{"frameType":0,"manufacturerSpecific":false,"direction":1,"disableDefaultResponse":true,"reservedBits":0}},"endpoint_id":1} zigbee.0 2025-06-25 20:16:20.347 warn ELEVATED:I01 (1a7b) Zigbee Event of Type attributeReport from device 0xffffb40e060599a0, incoming event: {"type":"attributeReport","data":{"measuredValue":0},"linkquality":225,"groupID":0,"cluster":"msRelativeHumidity","meta":{"zclTransactionSequenceNumber":209,"frameControl":{"frameType":0,"manufacturerSpecific":false,"direction":1,"disableDefaultResponse":true,"reservedBits":0}},"endpoint_id":1} zigbee.0 2025-06-25 20:16:20.345 warn ELEVATED:I01 (1a79) Zigbee Event of Type attributeReport from device 0xffffb40e060599a0, incoming event: {"type":"attributeReport","data":{"measuredValue":3081},"linkquality":225,"groupID":0,"cluster":"msTemperatureMeasurement","meta":{"zclTransactionSequenceNumber":208,"frameControl":{"frameType":0,"manufacturerSpecific":false,"direction":1,"disableDefaultResponse":true,"reservedBits":0}},"endpoint_id":1} zigbee.0 2025-06-25 20:16:05.388 warn ELEVATED:I02 (dfee) value generated '100' from device ffffb40e060599a0 for 'Battery percent' zigbee.0 2025-06-25 20:16:05.387 warn ELEVATED:I01 (dfee) message received '{"battery":100}' from device ffffb40e060599a0 type '3RSM0147Z' zigbee.0 2025-06-25 20:16:05.385 warn ELEVATED:I02 (dfee) value generated '225' from device ffffb40e060599a0 for 'Link quality' zigbee.0 2025-06-25 20:16:05.385 warn ELEVATED:I01 (dfee) message received '{"linkquality":225}' from device ffffb40e060599a0 type '3RSM0147Z' zigbee.0 2025-06-25 20:16:05.380 warn ELEVATED:NOVAL (dfed) No value published for device ffffb40e060599a0 zigbee.0 2025-06-25 20:16:05.380 warn ELEVATED:I01 (dfed) message received '{}' from device ffffb40e060599a0 type '3RSM0147Z' zigbee.0 2025-06-25 20:16:05.378 warn ELEVATED:I02 (dfed) value generated '225' from device ffffb40e060599a0 for 'Link quality' zigbee.0 2025-06-25 20:16:05.377 warn ELEVATED:I01 (dfed) message received '{"linkquality":225}' from device ffffb40e060599a0 type '3RSM0147Z' zigbee.0 2025-06-25 20:16:05.369 warn ELEVATED:I02 (dfe1) value generated '0' from device ffffb40e060599a0 for 'Humidity' zigbee.0 2025-06-25 20:16:05.369 warn ELEVATED:I01 (dfe1) message received '{"humidity":0}' from device ffffb40e060599a0 type '3RSM0147Z' zigbee.0 2025-06-25 20:16:05.368 warn ELEVATED:I02 (dfe1) value generated '225' from device ffffb40e060599a0 for 'Link quality' zigbee.0 2025-06-25 20:16:05.367 warn ELEVATED:I01 (dfe1) message received '{"linkquality":225}' from device ffffb40e060599a0 type '3RSM0147Z' zigbee.0 2025-06-25 20:16:05.366 warn ELEVATED:I02 (dfdd) value generated '30.81' from device ffffb40e060599a0 for 'Temperature' zigbee.0 2025-06-25 20:16:05.366 warn ELEVATED:I01 (dfdd) message received '{"temperature":30.81}' from device ffffb40e060599a0 type '3RSM0147Z' zigbee.0 2025-06-25 20:16:05.365 warn ELEVATED:I02 (dfdd) value generated '225' from device ffffb40e060599a0 for 'Link quality' zigbee.0 2025-06-25 20:16:05.364 warn ELEVATED:I01 (dfdd) message received '{"linkquality":225}' from device ffffb40e060599a0 type '3RSM0147Z' zigbee.0 2025-06-25 20:16:05.358 warn ELEVATED:I01 (dfee) Zigbee Event of Type attributeReport from device 0xffffb40e060599a0, incoming event: {"type":"attributeReport","data":{"batteryPercentageRemaining":200},"linkquality":225,"groupID":0,"cluster":"genPowerCfg","meta":{"zclTransactionSequenceNumber":207,"frameControl":{"frameType":0,"manufacturerSpecific":false,"direction":1,"disableDefaultResponse":true,"reservedBits":0}},"endpoint_id":1} zigbee.0 2025-06-25 20:16:05.357 warn ELEVATED:I01 (dfed) Zigbee Event of Type attributeReport from device 0xffffb40e060599a0, incoming event: {"type":"attributeReport","data":{"batteryVoltage":16},"linkquality":225,"groupID":0,"cluster":"genPowerCfg","meta":{"zclTransactionSequenceNumber":206,"frameControl":{"frameType":0,"manufacturerSpecific":false,"direction":1,"disableDefaultResponse":true,"reservedBits":0}},"endpoint_id":1} zigbee.0 2025-06-25 20:16:05.345 warn ELEVATED:I01 (dfe1) Zigbee Event of Type attributeReport from device 0xffffb40e060599a0, incoming event: {"type":"attributeReport","data":{"measuredValue":0},"linkquality":225,"groupID":0,"cluster":"msRelativeHumidity","meta":{"zclTransactionSequenceNumber":205,"frameControl":{"frameType":0,"manufacturerSpecific":false,"direction":1,"disableDefaultResponse":true,"reservedBits":0}},"endpoint_id":1} zigbee.0 2025-06-25 20:16:05.341 warn ELEVATED:I01 (dfdd) Zigbee Event of Type attributeReport from device 0xffffb40e060599a0, incoming event: {"type":"attributeReport","data":{"measuredValue":3081},"linkquality":225,"groupID":0,"cluster":"msTemperatureMeasurement","meta":{"zclTransactionSequenceNumber":204,"frameControl":{"frameType":0,"manufacturerSpecific":false,"direction":1,"disableDefaultResponse":true,"reservedBits":0}},"endpoint_id":1} zigbee.0 2025-06-25 20:16:05.293 warn ELEVATED:I02 (df38) value generated '0' from device ffffb40e060599a0 for 'Humidity' zigbee.0 2025-06-25 20:16:05.292 warn ELEVATED:I01 (df38) message received '{"humidity":0}' from device ffffb40e060599a0 type '3RSM0147Z' zigbee.0 2025-06-25 20:16:05.290 warn ELEVATED:I02 (df38) value generated '225' from device ffffb40e060599a0 for 'Link quality' zigbee.0 2025-06-25 20:16:05.290 warn ELEVATED:I01 (df38) message received '{"linkquality":225}' from device ffffb40e060599a0 type '3RSM0147Z' zigbee.0 2025-06-25 20:16:05.289 warn ELEVATED:I02 (df2e) value generated '30.81' from device ffffb40e060599a0 for 'Temperature' zigbee.0 2025-06-25 20:16:05.288 warn ELEVATED:I01 (df2e) message received '{"temperature":30.81}' from device ffffb40e060599a0 type '3RSM0147Z' zigbee.0 2025-06-25 20:16:05.286 warn ELEVATED:I02 (df2e) value generated '229' from device ffffb40e060599a0 for 'Link quality' zigbee.0 2025-06-25 20:16:05.286 warn ELEVATED:I01 (df2e) message received '{"linkquality":229}' from device ffffb40e060599a0 type '3RSM0147Z' zigbee.0 2025-06-25 20:16:05.176 warn ELEVATED:I01 (df38) Zigbee Event of Type attributeReport from device 0xffffb40e060599a0, incoming event: {"type":"attributeReport","data":{"measuredValue":0},"linkquality":225,"groupID":0,"cluster":"msRelativeHumidity","meta":{"zclTransactionSequenceNumber":203,"frameControl":{"frameType":0,"manufacturerSpecific":false,"direction":1,"disableDefaultResponse":true,"reservedBits":0}},"endpoint_id":1} zigbee.0 2025-06-25 20:16:05.166 warn ELEVATED:I01 (df2e) Zigbee Event of Type attributeReport from device 0xffffb40e060599a0, incoming event: {"type":"attributeReport","data":{"measuredValue":3081},"linkquality":229,"groupID":0,"cluster":"msTemperatureMeasurement","meta":{"zclTransactionSequenceNumber":202,"frameControl":{"frameType":0,"manufacturerSpecific":false,"direction":1,"disableDefaultResponse":true,"reservedBits":0}},"endpoint_id":1} zigbee.0 2025-06-25 20:15:50.311 warn ELEVATED:I02 (a50e) value generated '100' from device ffffb40e060599a0 for 'Battery percent' zigbee.0 2025-06-25 20:15:50.311 warn ELEVATED:I01 (a50e) message received '{"battery":100}' from device ffffb40e060599a0 type '3RSM0147Z' zigbee.0 2025-06-25 20:15:50.309 warn ELEVATED:I02 (a50e) value generated '225' from device ffffb40e060599a0 for 'Link quality' zigbee.0 2025-06-25 20:15:50.308 warn ELEVATED:I01 (a50e) message received '{"linkquality":225}' from device ffffb40e060599a0 type '3RSM0147Z' zigbee.0 2025-06-25 20:15:50.305 warn ELEVATED:NOVAL (a50b) No value published for device ffffb40e060599a0 zigbee.0 2025-06-25 20:15:50.305 warn ELEVATED:I01 (a50b) message received '{}' from device ffffb40e060599a0 type '3RSM0147Z' zigbee.0 2025-06-25 20:15:50.303 warn ELEVATED:I02 (a50b) value generated '225' from device ffffb40e060599a0 for 'Link quality' zigbee.0 2025-06-25 20:15:50.302 warn ELEVATED:I01 (a50b) message received '{"linkquality":225}' from device ffffb40e060599a0 type '3RSM0147Z' zigbee.0 2025-06-25 20:15:50.299 warn ELEVATED:I02 (a4f7) value generated '0' from device ffffb40e060599a0 for 'Humidity' zigbee.0 2025-06-25 20:15:50.298 warn ELEVATED:I01 (a4f7) message received '{"humidity":0}' from device ffffb40e060599a0 type '3RSM0147Z' zigbee.0 2025-06-25 20:15:50.297 warn ELEVATED:I02 (a4f7) value generated '225' from device ffffb40e060599a0 for 'Link quality' zigbee.0 2025-06-25 20:15:50.296 warn ELEVATED:I01 (a4f7) message received '{"linkquality":225}' from device ffffb40e060599a0 type '3RSM0147Z' zigbee.0 2025-06-25 20:15:50.295 warn ELEVATED:I02 (a4f1) value generated '30.81' from device ffffb40e060599a0 for 'Temperature' zigbee.0 2025-06-25 20:15:50.295 warn ELEVATED:I01 (a4f1) message received '{"temperature":30.81}' from device ffffb40e060599a0 type '3RSM0147Z' zigbee.0 2025-06-25 20:15:50.292 warn ELEVATED:I02 (a4f1) value generated '225' from device ffffb40e060599a0 for 'Link quality' zigbee.0 2025-06-25 20:15:50.292 warn ELEVATED:I01 (a4f1) message received '{"linkquality":225}' from device ffffb40e060599a0 type '3RSM0147Z' zigbee.0 2025-06-25 20:15:50.287 warn ELEVATED:I01 (a50e) Zigbee Event of Type attributeReport from device 0xffffb40e060599a0, incoming event: {"type":"attributeReport","data":{"batteryPercentageRemaining":200},"linkquality":225,"groupID":0,"cluster":"genPowerCfg","meta":{"zclTransactionSequenceNumber":201,"frameControl":{"frameType":0,"manufacturerSpecific":false,"direction":1,"disableDefaultResponse":true,"reservedBits":0}},"endpoint_id":1} zigbee.0 2025-06-25 20:15:50.283 warn ELEVATED:I01 (a50b) Zigbee Event of Type attributeReport from device 0xffffb40e060599a0, incoming event: {"type":"attributeReport","data":{"batteryVoltage":16},"linkquality":225,"groupID":0,"cluster":"genPowerCfg","meta":{"zclTransactionSequenceNumber":200,"frameControl":{"frameType":0,"manufacturerSpecific":false,"direction":1,"disableDefaultResponse":true,"reservedBits":0}},"endpoint_id":1} zigbee.0 2025-06-25 20:15:50.263 warn ELEVATED:I01 (a4f7) Zigbee Event of Type attributeReport from device 0xffffb40e060599a0, incoming event: {"type":"attributeReport","data":{"measuredValue":0},"linkquality":225,"groupID":0,"cluster":"msRelativeHumidity","meta":{"zclTransactionSequenceNumber":199,"frameControl":{"frameType":0,"manufacturerSpecific":false,"direction":1,"disableDefaultResponse":true,"reservedBits":0}},"endpoint_id":1} zigbee.0 2025-06-25 20:15:50.258 warn ELEVATED:I01 (a4f1) Zigbee Event of Type attributeReport from device 0xffffb40e060599a0, incoming event: {"type":"attributeReport","data":{"measuredValue":3081},"linkquality":225,"groupID":0,"cluster":"msTemperatureMeasurement","meta":{"zclTransactionSequenceNumber":198,"frameControl":{"frameType":0,"manufacturerSpecific":false,"direction":1,"disableDefaultResponse":true,"reservedBits":0}},"endpoint_id":1} zigbee.0 2025-06-25 20:15:39.159 warn ELEVATED:I02 (7990) value generated '225' from device ffffb40e060599a0 for 'Link quality' zigbee.0 2025-06-25 20:15:39.159 warn ELEVATED:I01 (7990) message received '{"linkquality":225}' from device ffffb40e060599a0 type '3RSM0147Z' zigbee.0 2025-06-25 20:15:39.158 warn ELEVATED:NOCONV (7990) No converter available for '3RSM0147Z' 'ffffb40e060599a0' with cluster 'genBasic' and type 'attributeReport' zigbee.0 2025-06-25 20:15:39.152 warn ELEVATED:I01 (7990) Zigbee Event of Type attributeReport from device 0xffffb40e060599a0, incoming event: {"type":"attributeReport","data":{"swBuildId":"v1.00.38"},"linkquality":225,"groupID":0,"cluster":"genBasic","meta":{"zclTransactionSequenceNumber":197,"frameControl":{"frameType":0,"manufacturerSpecific":false,"direction":1,"disableDefaultResponse":false,"reservedBits":0}},"endpoint_id":1} zigbee.0 2025-06-25 20:15:37.184 warn ELEVATED:I02 (71c5) value generated '100' from device ffffb40e060599a0 for 'Battery percent' zigbee.0 2025-06-25 20:15:37.183 warn ELEVATED:I01 (71c5) message received '{"battery":100}' from device ffffb40e060599a0 type '3RSM0147Z' zigbee.0 2025-06-25 20:15:37.179 warn ELEVATED:I02 (71c5) value generated '225' from device ffffb40e060599a0 for 'Link quality' zigbee.0 2025-06-25 20:15:37.178 warn ELEVATED:I01 (71c5) message received '{"linkquality":225}' from device ffffb40e060599a0 type '3RSM0147Z' zigbee.0 2025-06-25 20:15:37.172 warn ELEVATED:NOVAL (71c0) No value published for device ffffb40e060599a0 zigbee.0 2025-06-25 20:15:37.171 warn ELEVATED:I01 (71c0) message received '{}' from device ffffb40e060599a0 type '3RSM0147Z' zigbee.0 2025-06-25 20:15:37.168 warn ELEVATED:I02 (71c0) value generated '225' from device ffffb40e060599a0 for 'Link quality' zigbee.0 2025-06-25 20:15:37.167 warn ELEVATED:I01 (71c0) message received '{"linkquality":225}' from device ffffb40e060599a0 type '3RSM0147Z' zigbee.0 2025-06-25 20:15:37.158 warn ELEVATED:I01 (71c5) Zigbee Event of Type attributeReport from device 0xffffb40e060599a0, incoming event: {"type":"attributeReport","data":{"batteryPercentageRemaining":200},"linkquality":225,"groupID":0,"cluster":"genPowerCfg","meta":{"zclTransactionSequenceNumber":196,"frameControl":{"frameType":0,"manufacturerSpecific":false,"direction":1,"disableDefaultResponse":true,"reservedBits":0}},"endpoint_id":1} zigbee.0 2025-06-25 20:15:37.152 warn ELEVATED:I01 (71c0) Zigbee Event of Type attributeReport from device 0xffffb40e060599a0, incoming event: {"type":"attributeReport","data":{"batteryVoltage":16},"linkquality":225,"groupID":0,"cluster":"genPowerCfg","meta":{"zclTransactionSequenceNumber":195,"frameControl":{"frameType":0,"manufacturerSpecific":false,"direction":1,"disableDefaultResponse":true,"reservedBits":0}},"endpoint_id":1} zigbee.0 2025-06-25 20:15:36.071 warn ELEVATED:I02 (6d85) value generated '10' from device ffffb40e060599a0 for 'Link quality' zigbee.0 2025-06-25 20:15:36.070 warn ELEVATED:I01 (6d85) message received '{"linkquality":10}' from device ffffb40e060599a0 type '3RSM0147Z' zigbee.0 2025-06-25 20:15:36.070 warn ELEVATED:I02 (6d85) value generated 'true' from device ffffb40e060599a0 for 'Available' zigbee.0 2025-06-25 20:15:36.069 warn ELEVATED:I01 (6d85) message received '{"available":true}' from device ffffb40e060599a0 type '3RSM0147Z' zigbee.0 2025-06-25 20:15:35.187 warn ELEVATED:I02 (6a04) value generated '0' from device ffffb40e060599a0 for 'Humidity' zigbee.0 2025-06-25 20:15:35.186 warn ELEVATED:I01 (6a04) message received '{"humidity":0}' from device ffffb40e060599a0 type '3RSM0147Z' zigbee.0 2025-06-25 20:15:35.183 warn ELEVATED:I02 (6a04) value generated '225' from device ffffb40e060599a0 for 'Link quality' zigbee.0 2025-06-25 20:15:35.182 warn ELEVATED:I01 (6a04) message received '{"linkquality":225}' from device ffffb40e060599a0 type '3RSM0147Z' zigbee.0 2025-06-25 20:15:35.179 warn ELEVATED:I02 (69fc) value generated '30.81' from device ffffb40e060599a0 for 'Temperature' zigbee.0 2025-06-25 20:15:35.179 warn ELEVATED:I01 (69fc) message received '{"temperature":30.81}' from device ffffb40e060599a0 type '3RSM0147Z' zigbee.0 2025-06-25 20:15:35.177 warn ELEVATED:I02 (69fc) value generated '225' from device ffffb40e060599a0 for 'Link quality' zigbee.0 2025-06-25 20:15:35.176 warn ELEVATED:I01 (69fc) message received '{"linkquality":225}' from device ffffb40e060599a0 type '3RSM0147Z' zigbee.0 2025-06-25 20:15:35.172 warn ELEVATED:I01 (6a04) Zigbee Event of Type attributeReport from device 0xffffb40e060599a0, incoming event: {"type":"attributeReport","data":{"measuredValue":0},"linkquality":225,"groupID":0,"cluster":"msRelativeHumidity","meta":{"zclTransactionSequenceNumber":194,"frameControl":{"frameType":0,"manufacturerSpecific":false,"direction":1,"disableDefaultResponse":true,"reservedBits":0}},"endpoint_id":1} zigbee.0 2025-06-25 20:15:35.164 warn ELEVATED:I01 (69fc) Zigbee Event of Type attributeReport from device 0xffffb40e060599a0, incoming event: {"type":"attributeReport","data":{"measuredValue":3081},"linkquality":225,"groupID":0,"cluster":"msTemperatureMeasurement","meta":{"zclTransactionSequenceNumber":193,"frameControl":{"frameType":0,"manufacturerSpecific":false,"direction":1,"disableDefaultResponse":true,"reservedBits":0}},"endpoint_id":1} zigbee.0 2025-06-25 20:15:35.066 warn ELEVATED:Ida (699a) Device '0xffffb40e060599a0' announced itself zigbee.0 2025-06-25 20:14:54.818 info List of port: [{"path":"/dev/ttyUSB0","manufacturer":"ITead","serialNumber":"dad0c14dc174ef11b4f0cd8c8fcc3fa0","pnpId":"usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_dad0c14dc174ef11b4f0cd8c8fcc3fa0-if00-port0","vendorId":"10c4","productId":"ea60"},{"path":"/dev/ttyACM0","manufacturer":"0658","serialNumber":"E3040A02-4A02-0113-1510-041500BFCC64","pnpId":"usb-0658_0200_E3040A02-4A02-0113-1510-041500BFCC64-if00","vendorId":"0658","productId":"0200"},{"path":"/dev/ttyAMA0"},{"path":"/dev/ttyS0"}] zigbee.0 2025-06-25 20:14:16.430 warn ELEVATED:I02 (3665) value generated '10' from device ffffb40e060599a0 for 'Link quality' zigbee.0 2025-06-25 20:14:16.429 warn ELEVATED:I01 (3665) message received '{"linkquality":10}' from device ffffb40e060599a0 type '3RSM0147Z' zigbee.0 2025-06-25 20:14:16.424 warn ELEVATED:I02 (3664) value generated 'true' from device ffffb40e060599a0 for 'Available' zigbee.0 2025-06-25 20:14:16.423 warn ELEVATED:I01 (3664) message received '{"available":true}' from device ffffb40e060599a0 type '3RSM0147Z' zigbee.0 2025-06-25 20:14:15.705 info debug devices set to ["ffffb40e060599a0"] zigbee.0 2025-06-25 20:14:15.666 info Zigbee started zigbee.0 2025-06-25 20:14:15.663 info Currently 4 devices are joined: zigbee.0 2025-06-25 20:14:15.663 info 0x8c65a3fffe5256c2 (addr 11312): ZBDongle-E - SONOFF Sonoff Zigbee 3.0 USB Dongle Plus (EFR32MG21) with router firmware (Router) zigbee.0 2025-06-25 20:14:15.660 info 0x70b3d52b600a59f0 (addr 12676): TS011F_plug_3 - Tuya Smart plug (with power monitoring by polling) (Router) zigbee.0 2025-06-25 20:14:15.419 info 0xffffb40e060599a0 (addr 22929): 3RSM0147Z - Third Reality Soil sensor (EndDevice) zigbee.0 2025-06-25 20:14:15.391 info 0x0ceff6fffe5a0306 (addr 30247): SNZB-02D - SONOFF Temperature and humidity sensor with screen (EndDevice) zigbee.0 2025-06-25 20:14:15.315 info Unable to disable LED, unsupported function. zigbee.0 2025-06-25 20:14:15.313 info Zigbee-Herdsman started successfully with Coordinator firmware version: {"type":"zStack3x0","meta":{"transportrev":2,"product":1,"majorrel":2,"minorrel":7,"maintrel":1,"revision":20240710}} zigbee.0 2025-06-25 20:14:14.661 info Starting Zigbee-Herdsman zigbee.0 2025-06-25 20:14:14.659 info Installed Version: iobroker.zigbee@2.0.5 (Converters 23.6.0 Herdsman 3.5.2) zigbee.0 2025-06-25 20:14:14.606 info Starting Adapter npm ... zigbee.0 2025-06-25 20:14:14.604 info --- creating device debug --- zigbee.0 2025-06-25 20:14:14.600 info delete old Backup files. keep only last 10 zigbee.0 2025-06-25 20:14:14.582 info --> transmitPower : high+ zigbee.0 2025-06-25 20:14:14.571 info init localConfig zigbee.0 2025-06-25 20:14:14.540 info starting. Version 2.0.5 in /opt/iobroker/node_modules/iobroker.zigbee, node: v20.19.3, js-controller: 7.0.6Hier die Ausgabe von IoB Diag
======== Start marking the full check here =========== ```bash Script v.2025-03-08 *** BASE SYSTEM *** Static hostname: pi4-Master Icon name: computer Operating System: Debian GNU/Linux 11 (bullseye) Kernel: Linux 6.1.21-v8+ Architecture: arm64 OS is similar to: Model : Raspberry Pi 4 Model B Rev 1.5 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 20:19:41 up 8:00, 2 users, load average: 0.63, 0.76, 0.72 CPU threads: 4 *** LIFE CYCLE STATUS *** Debian 'bullseye' is the current oldstable version. Please upgrade to the latest stable release 'bookworm' in due time! *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** TIME AND TIMEZONES *** Local time: Wed 2025-06-25 20:19:42 CEST Universal time: Wed 2025-06-25 18:19:42 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': pi HOME=/home/pi GROUPS=pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** DISPLAY-SERVER SETUP *** Display-Server: false Desktop: Terminal: tty *** MEMORY *** total used free shared buff/cache available Mem: 7.8G 3.4G 374M 0.0K 4.1G 4.3G Swap: 99M 63M 36M Total: 7.9G 3.4G 410M Active iob-Instances: 45 7811 M total memory 3382 M used memory 3803 M active memory 3190 M inactive memory 374 M free memory 76 M buffer memory 3977 M swap cache 99 M total swap 63 M used swap 36 M free swap *** top - Table Of Processes *** top - 20:19:42 up 8:00, 2 users, load average: 0.63, 0.76, 0.72 Tasks: 219 total, 2 running, 216 sleeping, 0 stopped, 1 zombie %Cpu(s): 15.3 us, 8.3 sy, 0.0 ni, 76.4 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 7811.3 total, 374.5 free, 3382.3 used, 4054.5 buff/cache MiB Swap: 100.0 total, 36.1 free, 63.9 used. 4298.3 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * mosquitto.service loaded failed failed Mosquitto MQTT Broker LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 1 loaded units listed. *** DMESG CRITICAL ERRORS *** No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 220G 34G 178G 16% / devtmpfs devtmpfs 3.6G 0 3.6G 0% /dev tmpfs tmpfs 3.9G 0 3.9G 0% /dev/shm tmpfs tmpfs 1.6G 1.2M 1.6G 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/sda1 vfat 255M 31M 225M 13% /boot tmpfs tmpfs 782M 0 782M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Wed Jun 25 12:19:18 2025] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=E4:5F:01:84:59:3C vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=e432a575-02 rootfstype=ext4 fsck.repair=yes rootwait [Wed Jun 25 12:19:21 2025] EXT4-fs (sda2): mounted filesystem with ordered data mode. Quota mode: none. [Wed Jun 25 12:19:21 2025] VFS: Mounted root (ext4 filesystem) readonly on device 8:2. [Wed Jun 25 12:19:23 2025] EXT4-fs (sda2): re-mounted. Quota mode: none. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/sda2 ext4 rw,noatime `-/boot /dev/sda1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 9.6G /var/ 4.3G /var/log 4.1G /var/log/journal/eefdb7bad79f4dbab7d9171e992a2beb 4.1G /var/log/journal 3.4G /var/lib Archived and active journals take up 4.0G in the file system. /opt/iobroker/backups: 4.0K /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 2.3G /opt/iobroker/iobroker-data/ 1.3G /opt/iobroker/iobroker-data/backup-objects 775M /opt/iobroker/iobroker-data/files 156M /opt/iobroker/iobroker-data/files/vis-2 110M /opt/iobroker/iobroker-data/node-red The five largest files in iobroker-data are: 570M /opt/iobroker/iobroker-data/backup-objects/historyDB_2022_11_16-02_45_10_backupiobroker.tar.gz 461M /opt/iobroker/iobroker-data/backup-objects/influxDB_2022_11_16-02_40_53_backupiobroker.tar.gz 40M /opt/iobroker/iobroker-data/objects.jsonl 38M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.d3d286bd.js.map 27M /opt/iobroker/iobroker-data/files/tankerkoenig.admin/build/index.js.map USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-0658_0200_E3040A02-4A02-0113-1510-041500BFCC64-if00 /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_dad0c14dc174ef11b4f0cd8c8fcc3fa0-if00-port0 *** ZigBee Settings *** HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: /dev/ttyUSB0 Zigbee Network Settings on your coordinator/in nvbackup are: zigbee.X Extended Pan ID: *** MASKED *** Pan ID: *** MASKED *** Channel: *** MASKED *** Network Key: *** MASKED *** To unmask the settings run 'iob diag --unmask' *** NodeJS-Installation *** /usr/bin/nodejs v20.19.3 /usr/bin/node v20.19.3 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 /usr/bin/corepack 0.32.0 nodejs: Installed: 20.19.3-1nodesource1 Candidate: 20.19.3-1nodesource1 Version table: *** 20.19.3-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 20.19.2-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.19.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.19.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.18.3-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.18.2-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.18.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.18.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.17.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.16.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.15.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.15.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.14.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.13.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.2-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.12.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.11.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.10.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.9.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.8.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.7.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.6.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.5.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.4.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.3.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.2.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.1.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 20.0.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages 12.22.12~dfsg-1~deb11u7 500 500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages 12.22.12~dfsg-1~deb11u4 500 500 http://deb.debian.org/debian bullseye/main arm64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Hosts: pi4-Master pi4-Master (version: 7.0.6, hostname: pi4-Master , alive, uptime: 24898) Core adapters versions js-controller: 7.0.6 admin: 7.7.0 javascript: 8.9.2 nodejs modules from github: 5 +-- iobroker.icons-open-icon-library-png@0.1.3 (git+ssh://git@github.com/ioBroker/ioBroker.icons-open-icon-library-png.git#0847a79d713ee6725ccb6ccfb044c025b73ec946) +-- iobroker.life360@0.2.21 (git+ssh://git@github.com/MiGoller/ioBroker.life360.git#888e08024c2d93d86aa6eb74f281c574dce86c42) +-- iobroker.midea@0.1.0 (git+ssh://git@github.com/TA2k/ioBroker.midea.git#0d037c0c9a025b193546f881f747c8f998bfc724) | +-- samsungtv@0.0.0 (git+https://git@github.com/luca-saggese/samsungtv.git#7fc20107455414e2afb94022682e0787e8635550) +-- iobroker.sourceanalytix@0.4.15-alpha.1 (git+ssh://git@github.com/DrozmotiX/ioBroker.sourceanalytix.git#1010e11d126dc2e9639b70f17b79d082dead83ba) Adapter State + system.adapter.admin.0 : admin : pi4-Master - enabled, port: 6969, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : pi4-Master - enabled + system.adapter.backitup.0 : backitup : pi4-Master - enabled + system.adapter.ble.0 : ble : pi4-Master - enabled + system.adapter.cloud.0 : cloud : pi4-Master - enabled + system.adapter.ds18b20.0 : ds18b20 : pi4-Master - enabled + system.adapter.epson_ecotank_et_2750.0 : epson_ecotank_et_2750 : pi4-Master - enabled system.adapter.feiertage.0 : feiertage : pi4-Master - enabled + system.adapter.fritzbox.0 : fritzbox : pi4-Master - enabled system.adapter.fritzdect.0 : fritzdect : pi4-Master - disabled + system.adapter.fullybrowser.0 : fullybrowser : pi4-Master - enabled system.adapter.ham.0 : ham : pi4-Master - disabled + system.adapter.history.0 : history : pi4-Master - enabled + system.adapter.homeconnect.0 : homeconnect : pi4-Master - enabled + system.adapter.i2c.0 : i2c : pi4-Master - enabled system.adapter.ical.0 : ical : pi4-Master - enabled system.adapter.ical.1 : ical : pi4-Master - enabled system.adapter.ical.2 : ical : pi4-Master - enabled system.adapter.ical.3 : ical : pi4-Master - enabled system.adapter.ical.4 : ical : pi4-Master - enabled system.adapter.icons-addictive-flavour-png.0: icons-addictive-flavour-png: pi4-Master - enabled system.adapter.icons-material-png.0 : icons-material-png : pi4-Master - enabled system.adapter.icons-material-svg.0 : icons-material-svg : pi4-Master - enabled system.adapter.icons-mfd-png.0 : icons-mfd-png : pi4-Master - enabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : pi4-Master - enabled system.adapter.icons-open-icon-library-png.0: icons-open-icon-library-png: pi4-Master - enabled system.adapter.icons-ultimate-png.0 : icons-ultimate-png : pi4-Master - enabled + system.adapter.influxdb.0 : influxdb : pi4-Master - enabled, port: 8086 + system.adapter.iot.0 : iot : pi4-Master - enabled + system.adapter.javascript.0 : javascript : pi4-Master - enabled + system.adapter.knx.0 : knx : pi4-Master - enabled, bind: 192.168.178.185 + system.adapter.lgtv.0 : lgtv : pi4-Master - enabled system.adapter.life360.0 : life360 : pi4-Master - disabled + system.adapter.meross.0 : meross : pi4-Master - enabled system.adapter.midea.0 : midea : pi4-Master - disabled + system.adapter.mihome-vacuum.0 : mihome-vacuum : pi4-Master - enabled, port: 54321 + system.adapter.modbus.0 : modbus : pi4-Master - enabled + system.adapter.mqtt.0 : mqtt : pi4-Master - enabled, port: 1879, bind: 0.0.0.0 system.adapter.mqtt.1 : mqtt : pi4-Master - disabled, port: 1783, bind: 0.0.0.0 + system.adapter.net-tools.0 : net-tools : pi4-Master - enabled + system.adapter.node-red.0 : node-red : pi4-Master - enabled, port: 1880, bind: 0.0.0.0 + system.adapter.ping.0 : ping : pi4-Master - enabled + system.adapter.rpi2.0 : rpi2 : pi4-Master - enabled system.adapter.samsung.0 : samsung : pi4-Master - disabled + system.adapter.scenes.0 : scenes : pi4-Master - enabled system.adapter.schoolfree.0 : schoolfree : pi4-Master - enabled + system.adapter.shelly.0 : shelly : pi4-Master - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.shuttercontrol.0 : shuttercontrol : pi4-Master - enabled + system.adapter.simple-api.0 : simple-api : pi4-Master - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.sonnen.0 : sonnen : pi4-Master - enabled + system.adapter.sonoff.0 : sonoff : pi4-Master - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.sourceanalytix.0 : sourceanalytix : pi4-Master - enabled + system.adapter.sql.0 : sql : pi4-Master - enabled, port: 3307 + system.adapter.tankerkoenig.0 : tankerkoenig : pi4-Master - enabled + system.adapter.telegram.0 : telegram : pi4-Master - enabled, port: 8443, bind: 0.0.0.0 system.adapter.text2command.0 : text2command : pi4-Master - disabled + system.adapter.tr-064.0 : tr-064 : pi4-Master - enabled + system.adapter.trashschedule.0 : trashschedule : pi4-Master - enabled + system.adapter.tuya.0 : tuya : pi4-Master - enabled system.adapter.vis-2-widgets-jaeger-design.0: vis-2-widgets-jaeger-design: pi4-Master - enabled system.adapter.vis-2.0 : vis-2 : pi4-Master - disabled system.adapter.vis-google-fonts.0 : vis-google-fonts : pi4-Master - enabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : pi4-Master - enabled system.adapter.vis-icontwo.0 : vis-icontwo : pi4-Master - enabled + system.adapter.vis-inventwo.0 : vis-inventwo : pi4-Master - enabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : pi4-Master - enabled system.adapter.vis-justgage.0 : vis-justgage : pi4-Master - enabled system.adapter.vis-materialdesign.0 : vis-materialdesign : pi4-Master - enabled system.adapter.vis-metro.0 : vis-metro : pi4-Master - enabled system.adapter.vis-players.0 : vis-players : pi4-Master - enabled system.adapter.vis-plumb.0 : vis-plumb : pi4-Master - enabled system.adapter.vis-timeandweather.0 : vis-timeandweather : pi4-Master - enabled system.adapter.vis.0 : vis : pi4-Master - enabled + system.adapter.web.0 : web : pi4-Master - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.whatsapp-cmb.0 : whatsapp-cmb : pi4-Master - enabled + system.adapter.worx.0 : worx : pi4-Master - enabled + system.adapter.zigbee.0 : zigbee : pi4-Master - enabled, port: /dev/ttyUSB0 + system.adapter.zwave2.0 : zwave2 : pi4-Master - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : pi4-Master - enabled, port: 6969, bind: 0.0.0.0, run as: admin + system.adapter.influxdb.0 : influxdb : pi4-Master - enabled, port: 8086 + system.adapter.mihome-vacuum.0 : mihome-vacuum : pi4-Master - enabled, port: 54321 + system.adapter.mqtt.0 : mqtt : pi4-Master - enabled, port: 1879, bind: 0.0.0.0 + system.adapter.node-red.0 : node-red : pi4-Master - enabled, port: 1880, bind: 0.0.0.0 + system.adapter.shelly.0 : shelly : pi4-Master - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : pi4-Master - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.sonoff.0 : sonoff : pi4-Master - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.sql.0 : sql : pi4-Master - enabled, port: 3307 + system.adapter.telegram.0 : telegram : pi4-Master - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : pi4-Master - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : pi4-Master - enabled, port: /dev/ttyUSB0 ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ true │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): stable Upgrade policy: none Installed ioBroker-Adapters Used repository: stable Adapter "admin" : 7.6.17 , installed 7.7.0 Adapter "alexa2" : 3.26.5 , installed 3.26.5 Adapter "backitup" : 3.2.2 , installed 3.2.2 Adapter "ble" : 0.14.0 , installed 0.14.0 Adapter "cloud" : 5.0.1 , installed 5.0.1 Adapter "discovery" : 5.0.0 , installed 5.0.0 Adapter "ds18b20" : 3.0.1 , installed 3.0.1 Adapter "epson_ecotank_et_2750": 1.0.1, installed 1.0.1 Adapter "feiertage" : 1.2.1 , installed 1.2.1 Adapter "fritzbox" : 0.6.0 , installed 0.6.0 Adapter "fritzdect" : 2.6.2 , installed 2.6.1 [Updatable] Adapter "fullybrowser" : 3.1.1 , installed 3.1.1 Adapter "ham" : 5.3.1 , installed 5.3.1 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "homeconnect" : 1.4.3 , installed 1.4.3 Adapter "i2c" : 1.2.1 , installed 1.2.1 Adapter "ical" : 1.16.1 , installed 1.16.1 Adapter "icons-addictive-flavour-png": 0.1.0, installed 0.1.0 Adapter "icons-material-png": 0.1.0, installed 0.1.0 Adapter "icons-material-svg": 0.1.0, installed 0.1.0 Adapter "icons-mfd-png": 1.2.1 , installed 1.2.1 Adapter "icons-mfd-svg": 1.2.0 , installed 1.2.0 Adapter "icons-open-icon-library-png": 0.1.2, installed 0.1.3 Adapter "icons-ultimate-png": 1.0.1, installed 1.0.1 Adapter "influxdb" : 4.0.2 , installed 4.0.2 Adapter "iot" : 3.3.0 , installed 3.3.0 Adapter "javascript" : 8.9.2 , installed 8.9.2 Controller "js-controller": 7.0.6 , installed 7.0.6 Adapter "knx" : 2.0.30 , installed 2.0.30 Adapter "lgtv" : 2.4.0 , installed 2.4.0 Adapter "meross" : 1.17.0 , installed 1.17.0 Adapter "midea" : 0.0.7 , installed 0.1.0 Adapter "mihome-vacuum": 5.2.0 , installed 5.2.0 Adapter "modbus" : 6.3.2 , installed 6.3.2 Adapter "mqtt" : 6.1.2 , installed 6.1.2 Adapter "net-tools" : 1.1.2 , installed 1.1.2 Adapter "node-red" : 5.2.1 , installed 5.2.1 Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "rpi2" : 2.4.0 , installed 2.4.0 Adapter "samsung" : 0.6.1 , installed 0.6.1 Adapter "scenes" : 3.2.3 , installed 4.0.2 Adapter "schoolfree" : 1.1.9 , installed 1.1.9 Adapter "shelly" : 9.5.1 , installed 9.5.1 Adapter "shuttercontrol": 2.0.1 , installed 2.0.1 Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "socketio" : 6.7.1 , installed 7.0.8 Adapter "sonnen" : 1.18.1 , installed 1.18.1 Adapter "sonoff" : 3.1.2 , installed 3.1.2 Adapter "sql" : 3.0.1 , installed 3.0.1 Adapter "tankerkoenig" : 3.4.0 , installed 3.4.0 Adapter "telegram" : 4.1.0 , installed 4.1.0 Adapter "text2command" : 3.0.3 , installed 3.0.3 Adapter "tr-064" : 4.3.0 , installed 4.3.0 Adapter "trashschedule": 3.3.0 , installed 3.3.0 Adapter "tuya" : 3.16.0 , installed 3.16.0 Adapter "vis" : 1.5.6 , installed 1.5.6 Adapter "vis-2" : 2.9.64 , installed 2.9.64 Adapter "vis-2-widgets-jaeger-design": 1.2.7, installed 1.2.7 Adapter "vis-google-fonts": 1.0.4 , installed 1.0.4 Adapter "vis-hqwidgets": 1.5.1 , installed 1.5.1 Adapter "vis-icontwo" : 1.11.0 , installed 1.11.0 Adapter "vis-inventwo" : 3.3.5 , installed 3.3.5 Adapter "vis-jqui-mfd" : 1.1.1 , installed 1.1.1 Adapter "vis-justgage" : 2.1.7 , installed 2.1.7 Adapter "vis-materialdesign": 0.5.9, installed 0.5.9 Adapter "vis-metro" : 1.2.0 , installed 1.2.0 Adapter "vis-players" : 0.1.6 , installed 0.1.6 Adapter "vis-plumb" : 1.0.2 , installed 1.0.2 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "web" : 7.0.8 , installed 7.0.8 Adapter "whatsapp-cmb" : 0.3.0 , installed 0.3.0 Adapter "worx" : 3.2.4 , installed 3.2.4 Adapter "ws" : 2.6.2 , installed 3.0.19 Adapter "zigbee" : 2.0.5 , installed 2.0.5 Adapter "zwave2" : 3.1.0 , installed 3.1.0 Objects and States Please stand by - This may take a while Objects: 19833 States: 17847 *** OS-Repositories and Updates *** Hit:1 http://security.debian.org/debian-security bullseye-security InRelease Hit:2 http://deb.debian.org/debian bullseye InRelease Hit:3 http://deb.debian.org/debian bullseye-updates InRelease Hit:4 http://archive.raspberrypi.org/debian bullseye InRelease Hit:5 https://repos.influxdata.com/debian stable InRelease Hit:6 https://apt.grafana.com stable InRelease Hit:7 https://repos.influxdata.com/debian stretch InRelease Hit:8 https://deb.nodesource.com/node_20.x nodistro InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:9001 0.0.0.0:* LISTEN 1001 189723 25382/iobroker.js-c tcp 0 0 0.0.0.0:9000 0.0.0.0:* LISTEN 1001 188953 25382/iobroker.js-c tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 14559 654/sshd: /usr/sbin tcp 0 0 0.0.0.0:1879 0.0.0.0:* LISTEN 1001 190455 25928/io.mqtt.0 tcp 0 0 0.0.0.0:1880 0.0.0.0:* LISTEN 1001 190059 25580/node-red tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 195060 26220/io.sonoff.0 tcp 0 0 127.0.0.1:8088 0.0.0.0:* LISTEN 999 11677 696/influxd tcp6 0 0 :::22 :::* LISTEN 0 14562 654/sshd: /usr/sbin tcp6 0 0 :::1821 :::* LISTEN 1001 195880 26380/io.ds18b20.0 tcp6 0 0 :::3030 :::* LISTEN 1001 191039 25693/io.fullybrows tcp6 0 0 :::3000 :::* LISTEN 110 15485 808/grafana tcp6 0 0 :::6969 :::* LISTEN 1001 189057 25400/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1001 196567 26747/io.web.0 tcp6 0 0 :::8087 :::* LISTEN 1001 194545 26471/io.simple-api tcp6 0 0 :::8086 :::* LISTEN 999 13294 696/influxd udp 0 0 192.168.178.185:33436 0.0.0.0:* 1001 970178 25847/io.knx.0 udp 0 0 192.168.178.185:37561 0.0.0.0:* 1001 934363 25847/io.knx.0 udp 0 0 192.168.178.185:50320 0.0.0.0:* 1001 851723 25847/io.knx.0 udp 0 0 192.168.178.185:38034 0.0.0.0:* 1001 1204940 25847/io.knx.0 udp 0 0 192.168.178.185:5353 0.0.0.0:* 1001 195713 26246/io.tr-064.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 11598 522/avahi-daemon: r udp 0 0 192.168.178.185:38188 0.0.0.0:* 1001 503118 25847/io.knx.0 udp 0 0 192.168.178.185:42299 0.0.0.0:* 1001 1199623 25847/io.knx.0 udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 191462 26127/io.shelly.0 udp 0 0 192.168.178.185:58972 0.0.0.0:* 1001 934750 25847/io.knx.0 udp 0 0 192.168.178.185:38501 0.0.0.0:* 1001 306739 25847/io.knx.0 udp 0 0 0.0.0.0:55133 0.0.0.0:* 108 11600 522/avahi-daemon: r udp 0 0 192.168.178.185:39140 0.0.0.0:* 1001 968220 25847/io.knx.0 udp 0 0 192.168.178.185:47373 0.0.0.0:* 1001 318632 25847/io.knx.0 udp 0 0 0.0.0.0:6666 0.0.0.0:* 1001 196195 26279/io.tuya.0 udp 0 0 0.0.0.0:6667 0.0.0.0:* 1001 196196 26279/io.tuya.0 udp 0 0 192.168.178.185:43684 0.0.0.0:* 1001 1013029 25847/io.knx.0 udp 0 0 192.168.178.185:39720 0.0.0.0:* 1001 931937 25847/io.knx.0 udp 0 0 192.168.178.185:56110 0.0.0.0:* 1001 911755 25847/io.knx.0 udp 0 0 192.168.178.185:60235 0.0.0.0:* 1001 474397 25847/io.knx.0 udp 0 0 192.168.178.185:39839 0.0.0.0:* 1001 999258 25847/io.knx.0 udp 0 0 192.168.178.185:39989 0.0.0.0:* 1001 201298 25847/io.knx.0 udp 0 0 192.168.178.185:56379 0.0.0.0:* 1001 325796 25847/io.knx.0 udp 0 0 192.168.178.185:48380 0.0.0.0:* 1001 194001 25847/io.knx.0 udp 0 0 192.168.178.185:44379 0.0.0.0:* 1001 850925 25847/io.knx.0 udp 0 0 192.168.178.185:60959 0.0.0.0:* 1001 1009835 25847/io.knx.0 udp 0 0 192.168.178.185:32847 0.0.0.0:* 1001 205725 25847/io.knx.0 udp 0 0 0.0.0.0:53421 0.0.0.0:* 1001 192258 25902/io.mihome-vac udp 0 0 192.168.178.185:41156 0.0.0.0:* 1001 302699 25847/io.knx.0 udp 0 0 192.168.178.185:41274 0.0.0.0:* 1001 190969 25580/node-red udp6 0 0 :::5353 :::* 108 11599 522/avahi-daemon: r udp6 0 0 :::41173 :::* 108 11601 522/avahi-daemon: r *** Log File - Last 25 Lines *** 2025-06-25 20:16:20.378 - warn: zigbee.0 (154603) ELEVATED:I02 (1a87) value generated '225' from device ffffb40e060599a0 for 'Link quality' 2025-06-25 20:16:20.379 - warn: zigbee.0 (154603) ELEVATED:I01 (1a87) message received '{"battery":100}' from device ffffb40e060599a0 type '3RSM0147Z' 2025-06-25 20:16:20.380 - warn: zigbee.0 (154603) ELEVATED:I02 (1a87) value generated '100' from device ffffb40e060599a0 for 'Battery percent' 2025-06-25 20:16:22.969 - info: influxdb.0 (25437) Store 501 buffered influxDB history points 2025-06-25 20:17:02.120 - info: mqtt.0 (25928) Client [Holzhütte-Tür] connected with secret 1750875422120_3859 2025-06-25 20:17:02.972 - info: mqtt.0 (25928) Client [Holzhütte-Tür] connection closed: disconnected 2025-06-25 20:17:46.857 - info: influxdb.0 (25437) Store 501 buffered influxDB history points 2025-06-25 20:18:01.564 - info: mqtt.0 (25928) Client [Holzhütte-Tür] connected with secret 1750875481564_5212 2025-06-25 20:18:02.386 - info: mqtt.0 (25928) Client [Holzhütte-Tür] connection closed: disconnected 2025-06-25 20:18:04.113 - debug: alexa2.0 (25628) Alexa-Remote HTTP2-PUSH: Send Ping 2025-06-25 20:18:14.284 - debug: shuttercontrol.0 (26159) outsidetemperature changed: knx.0.Melden_Sensor.Wetterstation_Regensensor.Temperatur_Messwert | Value: 32.4°C 2025-06-25 20:19:01.991 - info: mqtt.0 (25928) Client [Holzhütte-Tür] connected with secret 1750875541990_2988 2025-06-25 20:19:02.869 - info: mqtt.0 (25928) Client [Holzhütte-Tür] connection closed: disconnected 2025-06-25 20:19:16.824 - info: influxdb.0 (25437) Store 504 buffered influxDB history points 2025-06-25 20:19:50.308 - debug: shuttercontrol.0 (26159) Lightsensor changed: knx.0.Melden_Sensor.Wetterstation_Regensensor.Helligjkeit_Süd_Messwert | Value: 10199.04lux 2025-06-25 20:20:00.007 - debug: shuttercontrol.0 (26159) calculate astrodata ... 2025-06-25 20:20:00.008 - debug: shuttercontrol.0 (26159) Sun Azimut: 296.6° 2025-06-25 20:20:00.008 - debug: shuttercontrol.0 (26159) Sun Elevation: 7.9° 2025-06-25 20:20:02.438 - info: mqtt.0 (25928) Client [Holzhütte-Tür] connected with secret 1750875602437_3871 2025-06-25 20:20:03.289 - info: mqtt.0 (25928) Client [Holzhütte-Tür] connection closed: disconnected 2025-06-25 20:20:24.266 - debug: shuttercontrol.0 (26159) outsidetemperature changed: knx.0.Melden_Sensor.Wetterstation_Regensensor.Temperatur_Messwert | Value: 32.3°C 2025-06-25 20:20:43.970 - info: influxdb.0 (25437) Store 501 buffered influxDB history points 2025-06-25 20:21:01.886 - info: mqtt.0 (25928) Client [Holzhütte-Tür] connected with secret 1750875661886_7516 2025-06-25 20:21:02.713 - info: mqtt.0 (25928) Client [Holzhütte-Tür] connection closed: disconnected 2025-06-25 20:21:04.114 - debug: alexa2.0 (25628) Alexa-Remote HTTP2-PUSH: Send PingKann mir jemand weiter helfen? Mfg Tom -
@autodidakt sagte in Zigbee Adapter schmeißt warnungen:
Debian GNU/Linux 11 (bullseye)
Losgelöst vom Problem:
Bring das Ding in allernächster Zeit auf das aktuelle Release Debian 12 'Bookworm'.Per Neuinstallation.
Zum Problem:
Setz das Gerät auf den 'link-by-id' fest, nicht auf /dev/ttyUSB0. Das Gerät kann u. U. beim nächsten Boot woanders liegen.USB-Devices by-id:
USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':/dev/serial/by-id/usb-0658_0200_E3040A02-4A02-0113-1510-041500BFCC64-if00
/dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_dad0c14dc174ef11b4f0cd8c8fcc3fa0-if00-port0*** ZigBee Settings ***
HINT:
Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting:
/dev/ttyUSB0 -
@autodidakt said in Zigbee Adapter schmeißt warnungen:
2025-06-25 20:14:15.705 info debug devices set to ["ffffb40e060599a0"]
das ist die relevante Zeile. Du hast das Debugging für das betroffene Gerät eingeschaltet. Schau Dir mal die Kachel des Geräts an. Der grüne Käfer dort sollte weiß sein, dann bleiben auch die Meldungen stumm.
-
Danke euch, Läuft.
-
@thomas-braun sagte in Zigbee Adapter schmeißt warnungen:
@autodidakt sagte in Zigbee Adapter schmeißt warnungen:
Debian GNU/Linux 11 (bullseye)
Losgelöst vom Problem:
Bring das Ding in allernächster Zeit auf das aktuelle Release Debian 12 'Bookworm'.Per Neuinstallation.
Gibt es dazu eine Anleitung?
Reicht es, den Iobroker Ordner nach neuinstallation in die neue Installation zu kopieren?
-
@autodidakt sagte in Zigbee Adapter schmeißt warnungen:
Per Neuinstallation.
Ja. Neuinstallieren.
https://forum.iobroker.net/topic/51869/installation-auf-raspi-einfacher-geht-s-nicht
-
@thomas-braun Merci, schau ich mir an.
-
@autodidakt sagte in Zigbee Adapter schmeißt warnungen:
Reicht es, den Iobroker Ordner nach neuinstallation in die neue Installation zu kopieren?
Nein, das macht man über ein ordentliches Backup mit dem Backitup-Adapter.
-
@thomas-braun Auch nicht schlecht, die Idee...
-
Ist jedenfalls eine bessere Idee als 'irgendwas wild' in die neue Installation zu kopieren.
-
@thomas-braun Super Sache, Danke für eure Hilfe. Jetzt komm ich wieder ein Stück weiter...
-
Und was könnte denn da falsch gelaufen sein?
node-red.0 2025-06-25 20:50:44.811 error Node-RED: Error: Install failed at /opt/iobroker/node_modules/@node-red/registry/lib/installer.js:288:25 at process.processTicksAndRejections (node:internal/process/task_queues:95:5) 25 Jun 20:50:44 - [error] Error: Install failed at /opt/iobroker/node_modules/@node-red/registry/lib/installer.js:288:25 at process.processTicksAndRejections (node:internal/process/task_queues:95:5) node-red.0 2025-06-25 20:50:44.809 warn Node-RED: 25 Jun 20:50:44 - [warn] npm warn config production Use `--omit=dev` instead. npm warn deprecated vis@4.21.0: Please consider using https://github.com/visjs npm error code 1 npm error path /opt/iobroker/iobroker-data/node-red/node_modules/zigbee-herdsman/node_modules/@serialport/bindings npm error command failed npm error command sh -c node-gyp rebuild npm error make: Entering directory '/opt/iobroker/iobroker-data/node-red/node_modules/zigbee-herdsman/node_modules/@serialport/bindings/build' npm error CXX(target) Release/obj.target/bindings/src/serialport.o npm error make: Leaving directory '/opt/iobroker/iobroker-data/node-red/node_modules/zigbee-herdsman/node_modules/@serialport/bindings/build' npm error gyp info it worked if it ends with ok npm error gyp info using node-gyp@8.4.1 npm error gyp info using node@20.19.3 | linux | arm64 npm error gyp info find Python using Python version 3.9.2 found at "/usr/bin/python3" npm error gyp info spawn /usr/bin/python3 npm error gyp info spawn args [ npm error gyp info spawn args '/opt/iobroker/node_modules/node-gyp/gyp/gyp_main.py', npm error gyp info spawn args 'binding.gyp', npm error gyp info spawn args '-f', npm error gyp info spawn args 'make', npm error gyp info spawn args '-I', npm error gyp info spawn args '/opt/iobroker/iobroker-data/node-red/node_modules/zigbee-herdsman/node_modules/@serialport/bindings/build/config.gypi', npm error gyp info spawn args '-I', npm error gyp info spawn args '/opt/iobroker/node_modules/node-gyp/addon.gypi', npm error gyp info spawn args '-I', npm error gyp info spawn args '/home/iobroker/.cache/node-gyp/20.19.3/include/node/common.gypi', npm error gyp info spawn args '-Dlibrary=shared_library', npm error gyp info spawn args '-Dvisibility=default', npm error gyp info spawn args '-Dnode_root_dir=/home/iobroker/.cache/node-gyp/20.19.3', npm error gyp info spawn args '-Dnode_gyp_dir=/opt/iobroker/node_modules/node-gyp', npm error gyp info spawn args '-Dnode_lib_file=/home/iobroker/.cache/node-gyp/20.19.3/<(target_arch)/node.lib', npm error gyp info spawn args '-Dmodule_root_dir=/opt/iobroker/iobroker-data/node-red/node_modules/zigbee-herdsman/node_modules/@serialport/bindings', npm error gyp info spawn args '-Dnode_engine=v8', npm error gyp info spawn args '--depth=.', npm error gyp info spawn args '--no-parallel', npm error gyp info spawn args '--generator-output', npm error gyp info spawn args 'build', npm error gyp info spawn args '-Goutput_dir=.' npm error gyp info spawn args ] npm error gyp info spawn make npm error gyp info spawn args [ 'BUILDTYPE=Release', '-C', 'build' ] npm error In file included from ../../../nan/nan.h:178, npm error from ../src/./serialport.h:13, npm error from ../src/serialport.cpp:1: npm error ../../../nan/nan_callbacks.h:55:23: error: ‘AccessorSignature’ is not a member of ‘v8’ npm error 55 | typedef v8::Local<v8::AccessorSignature> Sig; npm error | ^~~~~~~~~~~~~~~~~ npm error ../../../nan/nan_callbacks.h:55:40: error: template argument 1 is invalid npm error 55 | typedef v8::Local<v8::AccessorSignature> Sig; npm error | ^ npm error In file included from ../src/./serialport.h:13, npm error from ../src/serialport.cpp:1: npm error ../../../nan/nan.h: In function ‘void Nan::SetAccessor(v8::Local<v8::ObjectTemplate>, v8::Local<v8::String>, Nan::GetterCallback, Nan::SetterCallback, v8::Local<v8::Value>, v8::AccessControl, v8::PropertyAttribute, Nan::imp::Sig)’: npm error ../../../nan/nan.h:2551:16: error: no matching function for call to ‘v8::ObjectTemplate::SetAccessor(v8::Local<v8::String>&, void (*&)(v8::Local<v8::Name>, const v8::PropertyCallbackInfo<v8::Value>&), void (*&)(v8::Local<v8::Name>, v8::Local<v8::Value>, const v8::PropertyCallbackInfo<void>&), v8::Local<v8::Object>&, v8::AccessControl&, v8::PropertyAttribute&, Nan::imp::Sig&)’ npm error 2551 | , signature); npm error | ^ npm error In file included from /home/iobroker/.cache/node-gyp/20.19.3/include/node/v8-function.h:15, npm error from /home/iobroker/.cache/node-gyp/20.19.3/include/node/v8.h:33, npm error from /home/iobroker/.cache/node-gyp/20.19.3/include/node/node.h:73, npm error from ../../../nan/nan.h:58, npm error from ../src/./serialport.h:13, npm error from ../src/serialport.cpp:1: npm error /home/iobroker/.cache/node-gyp/20.19.3/include/node/v8-template.h:809:8: note: candidate: ‘void v8::ObjectTemplate::SetAccessor(v8::Local<v8::String>, v8::AccessorGetterCallback, v8::AccessorSetterCallback, v8::Local<v8::Value>, v8::AccessControl, v8::PropertyAttribute, v8::SideEffectType, v8::SideEffectType)’ npm error 809 | void SetAccessor( npm error | ^~~~~~~~~~~ npm error /home/iobroker/.cache/node-gyp/20.19.3/include/node/v8-template.h:814:22: note: no known conversion for argument 7 from ‘Nan::imp::Sig’ {aka ‘int’} to ‘v8::SideEffectType’ npm error 814 | SideEffectType getter_side_effect_type = SideEffectType::kHasSideEffect, npm error | ~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ npm error /home/iobroker/.cache/node-gyp/20.19.3/include/node/v8-template.h:816:8: note: candidate: ‘void v8::ObjectTemplate::SetAccessor(v8::Local<v8::Name>, v8::AccessorNameGetterCallback, v8::AccessorNameSetterCallback, v8::Local<v8::Value>, v8::AccessControl, v8::PropertyAttribute, v8::SideEffectType, v8::SideEffectType)’ npm error 816 | void SetAccessor( npm error | ^~~~~~~~~~~ npm error /home/iobroker/.cache/node-gyp/20.19.3/include/node/v8-template.h:821:22: note: no known conversion for argument 7 from ‘Nan::imp::Sig’ {aka ‘int’} to ‘v8::SideEffectType’ npm error 821 | SideEffectType getter_side_effect_type = SideEffectType::kHasSideEffect, npm error | ~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ npm error ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Open(Nan::NAN_METHOD_ARGS_TYPE)’: npm error ../src/serialport.cpp:78:51: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] npm error 78 | uv_queue_work(uv_default_loop(), req, EIO_Open, (uv_after_work_cb)EIO_AfterOpen); npm error | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ npm error ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Update(Nan::NAN_METHOD_ARGS_TYPE)’: npm error ../src/serialport.cpp:135:53: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] npm error 135 | uv_queue_work(uv_default_loop(), req, EIO_Update, (uv_after_work_cb)EIO_AfterUpdate); npm error | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ npm error ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Close(Nan::NAN_METHOD_ARGS_TYPE)’: npm error ../src/serialport.cpp:175:52: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] npm error 175 | uv_queue_work(uv_default_loop(), req, EIO_Close, (uv_after_work_cb)EIO_AfterClose); npm error | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ npm error ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Flush(Nan::NAN_METHOD_ARGS_TYPE)’: npm error ../src/serialport.cpp:215:52: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] npm error 215 | uv_queue_work(uv_default_loop(), req, EIO_Flush, (uv_after_work_cb)EIO_AfterFlush); npm error | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ npm error ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Set(Nan::NAN_METHOD_ARGS_TYPE)’: npm error ../src/serialport.cpp:271:50: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] npm error 271 | uv_queue_work(uv_default_loop(), req, EIO_Set, (uv_after_work_cb)EIO_AfterSet); npm error | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ npm error ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Get(Nan::NAN_METHOD_ARGS_TYPE)’: npm error ../src/serialport.cpp:316:50: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] npm error 316 | uv_queue_work(uv_default_loop(), req, EIO_Get, (uv_after_work_cb)EIO_AfterGet); npm error | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ npm error ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE GetBaudRate(Nan::NAN_METHOD_ARGS_TYPE)’: npm error ../src/serialport.cpp:366:58: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] npm error 366 | uv_queue_work(uv_default_loop(), req, EIO_GetBaudRate, (uv_after_work_cb)EIO_AfterGetBaudRate); npm error | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ npm error ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Drain(Nan::NAN_METHOD_ARGS_TYPE)’: npm error ../src/serialport.cpp:412:52: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] npm error 412 | uv_queue_work(uv_default_loop(), req, EIO_Drain, (uv_after_work_cb)EIO_AfterDrain); npm error | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ npm error ../src/serialport.cpp: At global scope: npm error ../src/serialport.cpp:433:28: warning: unnecessary parentheses in declaration of ‘ToParityEnum’ [-Wparentheses] npm error 433 | SerialPortParity NAN_INLINE(ToParityEnum(const v8::Local<v8::String>& v8str)) { npm error | ^ npm error ../src/serialport.cpp:452:30: warning: unnecessary parentheses in declaration of ‘ToStopBitEnum’ [-Wparentheses] npm error 452 | SerialPortStopBits NAN_INLINE(ToStopBitEnum(double stopBits)) { npm error | ^ npm error In file included from ../../../nan/nan.h:58, npm error from ../src/./serialport.h:13, npm error from ../src/serialport.cpp:1: npm error /home/iobroker/.cache/node-gyp/20.19.3/include/node/node.h:1227:7: warning: cast between incompatible function types from ‘void (*)(Nan::ADDON_REGISTER_FUNCTION_ARGS_TYPE)’ {aka ‘void (*)(v8::Local<v8::Object>)’} to ‘node::addon_register_func’ {aka ‘void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)’} [-Wcast-function-type] npm error 1227 | (node::addon_register_func) (regfunc), \ npm error | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ npm error /home/iobroker/.cache/node-gyp/20.19.3/include/node/node.h:1261:3: note: in expansion of macro ‘NODE_MODULE_X’ npm error 1261 | NODE_MODULE_X(modname, regfunc, NULL, 0) // NOLINT (readability/null_usage) npm error | ^~~~~~~~~~~~~ npm error ../src/serialport.cpp:486:1: note: in expansion of macro ‘NODE_MODULE’ npm error 486 | NODE_MODULE(serialport, init); npm error | ^~~~~~~~~~~ npm error make: *** [bindings.target.mk:109: Release/obj.target/bindings/src/serialport.o] Error 1 npm error gyp ERR! build error npm error gyp ERR! stack Error: `make` failed with exit code: 2 npm error gyp ERR! stack at ChildProcess.onExit (/opt/iobroker/node_modules/node-gyp/lib/build.js:194:23) npm error gyp ERR! stack at ChildProcess.emit (node:events:524:28) npm error gyp ERR! stack at ChildProcess._handle.onexit (node:internal/child_process:293:12) npm error gyp ERR! System Linux 6.1.21-v8+ npm error gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/.bin/node-gyp" "rebuild" npm error gyp ERR! cwd /opt/iobroker/iobroker-data/node-red/node_modules/zigbee-herdsman/node_modules/@serialport/bindings npm error gyp ERR! node -v v20.19.3 npm error gyp ERR! node-gyp -v v8.4.1 npm error gyp ERR! not ok npm error A complete log of this run can be found in: /home/iobroker/.npm/_logs/2025-06-25T18_50_27_905Z-debug-0.log 25 Jun 20:50:44 - [warn] ------------------------------------------ node-red.0 2025-06-25 20:50:44.808 warn Node-RED: 25 Jun 20:50:44 - [warn] ------------------------------------------ node-red.0 2025-06-25 20:50:44.807 warn Node-RED: 25 Jun 20:50:44 - [warn] Installation of module node-red-contrib-zigbee failed: -
ELEVATED
bedeutet dass da irgend zu einem Gerät die Debug infos an sind
steht hier was - >
zigbee.0.info.debugmessages -
@autodidakt sagte in Zigbee Adapter schmeißt warnungen:
Und was könnte denn da falsch gelaufen sein?
Könnte man evtl sehen, wenn du das direkte Log unter /opt/iobroker/logs
Posten würdest und nicht den GUI-Hantier. -
2025-06-25 21:25:46.719 - [33mwarn[39m: node-red.0 (25486) Node-RED: 25 Jun 21:25:46 - [warn] Installation of module node-red-contrib-zigbee failed: 2025-06-25 21:25:46.720 - [33mwarn[39m: node-red.0 (25486) Node-RED: 25 Jun 21:25:46 - [warn] ------------------------------------------ 25 Jun 21:25:46 - [warn] npm warn config production Use `--omit=dev` instead. npm warn deprecated vis@4.21.0: Please consider using https://github.com/visjs npm error code 1 npm error path /opt/iobroker/iobroker-data/node-red/node_modules/zigbee-herdsman/node_modules/@serialport/bindings npm error command failed npm error command sh -c node-gyp rebuild npm error make: Entering directory '/opt/iobroker/iobroker-data/node-red/node_modules/zigbee-herdsman/node_modules/@serialport/bindings/build' npm error CXX(target) Release/obj.target/bindings/src/serialport.o npm error make: Leaving directory '/opt/iobroker/iobroker-data/node-red/node_modules/zigbee-herdsman/node_modules/@serialport/bindings/build' npm error gyp info it worked if it ends with ok npm error gyp info using node-gyp@8.4.1 npm error gyp info using node@20.19.3 | linux | arm64 npm error gyp info find Python using Python version 3.9.2 found at "/usr/bin/python3" npm error gyp info spawn /usr/bin/python3 npm error gyp info spawn args [ npm error gyp info spawn args '/opt/iobroker/node_modules/node-gyp/gyp/gyp_main.py', npm error gyp info spawn args 'binding.gyp', npm error gyp info spawn args '-f', npm error gyp info spawn args 'make', npm error gyp info spawn args '-I', npm error gyp info spawn args '/opt/iobroker/iobroker-data/node-red/node_modules/zigbee-herdsman/node_modules/@serialport/bindings/build/config.gypi', npm error gyp info spawn args '-I', npm error gyp info spawn args '/opt/iobroker/node_modules/node-gyp/addon.gypi', npm error gyp info spawn args '-I', npm error gyp info spawn args '/home/iobroker/.cache/node-gyp/20.19.3/include/node/common.gypi', npm error gyp info spawn args '-Dlibrary=shared_library', npm error gyp info spawn args '-Dvisibility=default', npm error gyp info spawn args '-Dnode_root_dir=/home/iobroker/.cache/node-gyp/20.19.3', npm error gyp info spawn args '-Dnode_gyp_dir=/opt/iobroker/node_modules/node-gyp', npm error gyp info spawn args '-Dnode_lib_file=/home/iobroker/.cache/node-gyp/20.19.3/<(target_arch)/node.lib', npm error gyp info spawn args '-Dmodule_root_dir=/opt/iobroker/iobroker-data/node-red/node_modules/zigbee-herdsman/node_modules/@serialport/bindings', npm error gyp info spawn args '-Dnode_engine=v8', npm error gyp info spawn args '--depth=.', npm error gyp info spawn args '--no-parallel', npm error gyp info spawn args '--generator-output', npm error gyp info spawn args 'build', npm error gyp info spawn args '-Goutput_dir=.' npm error gyp info spawn args ] npm error gyp info spawn make npm error gyp info spawn args [ 'BUILDTYPE=Release', '-C', 'build' ] npm error In file included from ../../../nan/nan.h:178, npm error from ../src/./serialport.h:13, npm error from ../src/serialport.cpp:1: npm error ../../../nan/nan_callbacks.h:55:23: error: ‘AccessorSignature’ is not a member of ‘v8’ npm error 55 | typedef v8::Local<v8::AccessorSignature> Sig; npm error | ^~~~~~~~~~~~~~~~~ npm error ../../../nan/nan_callbacks.h:55:40: error: template argument 1 is invalid npm error 55 | typedef v8::Local<v8::AccessorSignature> Sig; npm error | ^ npm error In file included from ../src/./serialport.h:13, npm error from ../src/serialport.cpp:1: npm error ../../../nan/nan.h: In function ‘void Nan::SetAccessor(v8::Local<v8::ObjectTemplate>, v8::Local<v8::String>, Nan::GetterCallback, Nan::SetterCallback, v8::Local<v8::Value>, v8::AccessControl, v8::PropertyAttribute, Nan::imp::Sig)’: npm error ../../../nan/nan.h:2551:16: error: no matching function for call to ‘v8::ObjectTemplate::SetAccessor(v8::Local<v8::String>&, void (*&)(v8::Local<v8::Name>, const v8::PropertyCallbackInfo<v8::Value>&), void (*&)(v8::Local<v8::Name>, v8::Local<v8::Value>, const v8::PropertyCallbackInfo<void>&), v8::Local<v8::Object>&, v8::AccessControl&, v8::PropertyAttribute&, Nan::imp::Sig&)’ npm error 2551 | , signature); npm error | ^ npm error In file included from /home/iobroker/.cache/node-gyp/20.19.3/include/node/v8-function.h:15, npm error from /home/iobroker/.cache/node-gyp/20.19.3/include/node/v8.h:33, npm error from /home/iobroker/.cache/node-gyp/20.19.3/include/node/node.h:73, npm error from ../../../nan/nan.h:58, npm error from ../src/./serialport.h:13, npm error from ../src/serialport.cpp:1: npm error /home/iobroker/.cache/node-gyp/20.19.3/include/node/v8-template.h:809:8: note: candidate: ‘void v8::ObjectTemplate::SetAccessor(v8::Local<v8::String>, v8::AccessorGetterCallback, v8::AccessorSetterCallback, v8::Local<v8::Value>, v8::AccessControl, v8::PropertyAttribute, v8::SideEffectType, v8::SideEffectType)’ npm error 809 | void SetAccessor( npm error | ^~~~~~~~~~~ npm error /home/iobroker/.cache/node-gyp/20.19.3/include/node/v8-template.h:814:22: note: no known conversion for argument 7 from ‘Nan::imp::Sig’ {aka ‘int’} to ‘v8::SideEffectType’ npm error 814 | SideEffectType getter_side_effect_type = SideEffectType::kHasSideEffect, npm error | ~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ npm error /home/iobroker/.cache/node-gyp/20.19.3/include/node/v8-template.h:816:8: note: candidate: ‘void v8::ObjectTemplate::SetAccessor(v8::Local<v8::Name>, v8::AccessorNameGetterCallback, v8::AccessorNameSetterCallback, v8::Local<v8::Value>, v8::AccessControl, v8::PropertyAttribute, v8::SideEffectType, v8::SideEffectType)’ npm error 816 | void SetAccessor( npm error | ^~~~~~~~~~~ npm error /home/iobroker/.cache/node-gyp/20.19.3/include/node/v8-template.h:821:22: note: no known conversion for argument 7 from ‘Nan::imp::Sig’ {aka ‘int’} to ‘v8::SideEffectType’ npm error 821 | SideEffectType getter_side_effect_type = SideEffectType::kHasSideEffect, npm error | ~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ npm error ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Open(Nan::NAN_METHOD_ARGS_TYPE)’: npm error ../src/serialport.cpp:78:51: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] npm error 78 | uv_queue_work(uv_default_loop(), req, EIO_Open, (uv_after_work_cb)EIO_AfterOpen); npm error | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ npm error ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Update(Nan::NAN_METHOD_ARGS_TYPE)’: npm error ../src/serialport.cpp:135:53: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] npm error 135 | uv_queue_work(uv_default_loop(), req, EIO_Update, (uv_after_work_cb)EIO_AfterUpdate); npm error | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ npm error ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Close(Nan::NAN_METHOD_ARGS_TYPE)’: npm error ../src/serialport.cpp:175:52: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] npm error 175 | uv_queue_work(uv_default_loop(), req, EIO_Close, (uv_after_work_cb)EIO_AfterClose); npm error | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ npm error ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Flush(Nan::NAN_METHOD_ARGS_TYPE)’: npm error ../src/serialport.cpp:215:52: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] npm error 215 | uv_queue_work(uv_default_loop(), req, EIO_Flush, (uv_after_work_cb)EIO_AfterFlush); npm error | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ npm error ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Set(Nan::NAN_METHOD_ARGS_TYPE)’: npm error ../src/serialport.cpp:271:50: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] npm error 271 | uv_queue_work(uv_default_loop(), req, EIO_Set, (uv_after_work_cb)EIO_AfterSet); npm error | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ npm error ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Get(Nan::NAN_METHOD_ARGS_TYPE)’: npm error ../src/serialport.cpp:316:50: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] npm error 316 | uv_queue_work(uv_default_loop(), req, EIO_Get, (uv_after_work_cb)EIO_AfterGet); npm error | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ npm error ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE GetBaudRate(Nan::NAN_METHOD_ARGS_TYPE)’: npm error ../src/serialport.cpp:366:58: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] npm error 366 | uv_queue_work(uv_default_loop(), req, EIO_GetBaudRate, (uv_after_work_cb)EIO_AfterGetBaudRate); npm error | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ npm error ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Drain(Nan::NAN_METHOD_ARGS_TYPE)’: npm error ../src/serialport.cpp:412:52: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] npm error 412 | uv_queue_work(uv_default_loop(), req, EIO_Drain, (uv_after_work_cb)EIO_AfterDrain); npm error | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ npm error ../src/serialport.cpp: At global scope: npm error ../src/serialport.cpp:433:28: warning: unnecessary parentheses in declaration of ‘ToParityEnum’ [-Wparentheses] npm error 433 | SerialPortParity NAN_INLINE(ToParityEnum(const v8::Local<v8::String>& v8str)) { npm error | ^ npm error ../src/serialport.cpp:452:30: warning: unnecessary parentheses in declaration of ‘ToStopBitEnum’ [-Wparentheses] npm error 452 | SerialPortStopBits NAN_INLINE(ToStopBitEnum(double stopBits)) { npm error | ^ npm error In file included from ../../../nan/nan.h:58, npm error from ../src/./serialport.h:13, npm error from ../src/serialport.cpp:1: npm error /home/iobroker/.cache/node-gyp/20.19.3/include/node/node.h:1227:7: warning: cast between incompatible function types from ‘void (*)(Nan::ADDON_REGISTER_FUNCTION_ARGS_TYPE)’ {aka ‘void (*)(v8::Local<v8::Object>)’} to ‘node::addon_register_func’ {aka ‘void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)’} [-Wcast-function-type] npm error 1227 | (node::addon_register_func) (regfunc), \ npm error | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ npm error /home/iobroker/.cache/node-gyp/20.19.3/include/node/node.h:1261:3: note: in expansion of macro ‘NODE_MODULE_X’ npm error 1261 | NODE_MODULE_X(modname, regfunc, NULL, 0) // NOLINT (readability/null_usage) npm error | ^~~~~~~~~~~~~ npm error ../src/serialport.cpp:486:1: note: in expansion of macro ‘NODE_MODULE’ npm error 486 | NODE_MODULE(serialport, init); npm error | ^~~~~~~~~~~ npm error make: *** [bindings.target.mk:109: Release/obj.target/bindings/src/serialport.o] Error 1 npm error gyp ERR! build error npm error gyp ERR! stack Error: `make` failed with exit code: 2 npm error gyp ERR! stack at ChildProcess.onExit (/opt/iobroker/node_modules/node-gyp/lib/build.js:194:23) npm error gyp ERR! stack at ChildProcess.emit (node:events:524:28) npm error gyp ERR! stack at ChildProcess._handle.onexit (node:internal/child_process:293:12) npm error gyp ERR! System Linux 6.1.21-v8+ npm error gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/.bin/node-gyp" "rebuild" npm error gyp ERR! cwd /opt/iobroker/iobroker-data/node-red/node_modules/zigbee-herdsman/node_modules/@serialport/bindings npm error gyp ERR! node -v v20.19.3 npm error gyp ERR! node-gyp -v v8.4.1 npm error gyp ERR! not ok npm error A complete log of this run can be found in: /home/iobroker/.npm/_logs/2025-06-25T19_25_26_960Z-debug-0.logpi@pi4-Master:~ $ tail /home/iobroker/.npm/_logs/2025-06-25T19_25_26_960Z-debug-0.log 1028 silly unfinished npm timer build:deps 1750879540508 1029 silly unfinished npm timer build:run:install 1750879540638 1030 silly unfinished npm timer build:run:install:node_modules/zigbee-herdsman/node_modules/@serialport/bindings 1750879540657 1031 verbose cwd /opt/iobroker/iobroker-data/node-red 1032 verbose os Linux 6.1.21-v8+ 1033 verbose node v20.19.3 1034 verbose npm v10.8.2 1035 verbose exit 1 1036 verbose code 1 1037 error A complete log of this run can be found in: /home/iobroker/.npm/_logs/2025-06-25T19_25_26_960Z-debug-0.log pi@pi4-Master:~ $ -
@arteck sagte in Zigbee Adapter schmeißt warnungen:
ELEVATED
bedeutet dass da irgend zu einem Gerät die Debug infos an sind
steht hier was - >
zigbee.0.info.debugmessagesNein, logstufe ist auf Info
-
@autodidakt es geht nicht um die logstufe sondern um den eintrag da drin.. aber da wird ehh nix mehr drin stehen..
-
@arteck Ich kann Dir nicht folgen...
-
Ich habe ein ähnliches Problem, allerdings steht bei mir nirgends was von Debug und der Käfer ist auch weiß.
-
@brokerti said in Zigbee Adapter schmeißt warnungen:
Ich habe ein ähnliches Problem, allerdings steht bei mir nirgends was von Debug und der Käfer ist auch weiß.
Bist Du sicher, dass Du die richtige Kachel angeschaut hast? Vielleicht sind bei Dir auch die Farben anders, wenn Du mit der Maus über dem Käfer "hoverst", was sagt der Tooltip? Er sollte "Enable Debug" anzeigen, wenn Debug ausgeschaltet ist (klingt komisch, ist aber so).
gfs. danach den Adapter neu starten, dabei auf Meldungen im Log schauen:
2025-06-25 20:14:15.705 info debug devices set to ["xxxxxxxx"]
Mit grünem Käfer wird in den eckigen Klammern eine Liste der Debug-Geräte angezeigt. Ohne Debug-Geräte sollte dort
[]stehen.
