Инсталляция под Linux

[Bluefox]

@electric69:

BlueFox, подскажи пожалуйста, почему сервер не может получить сведения об обновлениях?

Скрин лога прилагаю.

Хотя интернет есть, все сайты пингуются, в том числе гитхаб… `
Что пишет, если ты в консоли вызываешь

iobroker update

?

[MSapogov]

Спасибо за обновление драйвера Mega-D!

А сейчас процесс установки на Debian Ubuntu (amd64) чемто отличается от приведенный на первой странице?

Дохожу до

/opt/iobroker# npm install iobroker

А в ответ сразу:

npm WARN cannot run in wd iobroker@0.5.6 node lib/setup.js (wd=/opt/iobroker/node_modules/iobroker)

iobroker@0.5.6 node_modules/iobroker

└── yargs@1.2.6 (minimist@0.1.0)

И дальше тишина …

Одинаково и в Debian 0.8.2 и Ubuntu 14.04

Можно как-то обновить инструкцию...

[Bluefox]

Попробуй: sudo npm install iobroker
4867_skript.jpg

[MSapogov]

@Bluefox:

Попробуй: sudo npm install iobroker `
Я все запускал от root-а.

Все оказалось очень просто…

Установка node из репозитория.

chmod 777 /opt/iobroker

и ссылка на "node" с помощью команды "sudo ln -s /usr/bin/nodejs /usr/bin/node"

После этого

npm install iobroker

Прошла как по маслу...

Спасибо.

[Bluefox]

Надо внести в инструкцию:
` > Firts check if node.js is installed. You can do it with command node -v.

If you got an answer, you can continue with the installation.

If not. Try to install node.js with apt-get install nodejs.

Sometimes node.js has not installed the soft link. If you see outputs with /usr/bin/nodejs -v, following can help:

ln -s /usr/bin/nodejs /usr/bin/node `

[ford7]

@ford7:

Подскажите, как починить?

вкладка "драйвера" пустая.

upd:

вкладка "сервера" тоже пустая.

А в настройках все штатно: `
Вот при каждой попытке обновления js-controller происходит такая штука. Приходится заново руками js-controller устанавливать. Может у меня чего-то не так установилось изначально или строки какой-нить не хватает?

[electric69]

@ford7:

@ford7:

Подскажите, как починить?

вкладка "драйвера" пустая.

upd:

вкладка "сервера" тоже пустая.

А в настройках все штатно: Вот при ****каждой**** попытке обновления js-controller происходит такая штука. Приходится заново руками js-controller устанавливать. Может у меня чего-то не так установилось изначально или строки какой-нить не хватает?
Попробуй поиграться с правами на папку iobroker. Мне помогло вроде…

[aurodionov]

Сегодня "пал смертью храбрых" хард на неттопе где крутился iobroker, вагон бедов

Отсель вопрос как быстро натянуть назад iobroker, ставил в первые версии, всё руками и исходников, что изменилось

Сори ,что спрашиваю не перелопатив ветки и вики.

[Bluefox]

ioBroker ставится 4мя командами:

sudo mkdir /opt/iobroker
cd /opt/iobroker
sudo chmod 777 .
sudo npm install iobroker

[aurodionov]

Поменял хард, накатил debian 8.2.0, node, ставлю iobroker и получаю вагон варнингов и ошибок

Может чего не установилось или забыл поставить, прошлый раз ноду собирал из сырцов, сейчас водрузил с репо

! ````
root@SmartHome:/opt/iobroker# npm install iobroker

iobroker@0.5.6 install /opt/node_modules/iobroker
node lib/setup.js
! npm install iobroker.js-controller --production --prefix /opt
npm WARN engine hawk@3.1.0: wanted: {"node":">=0.10.32"} (current: {"node":"0.10.29","npm":"1.4.21"})
npm WARN engine hoek@2.16.3: wanted: {"node":">=0.10.40"} (current: {"node":"0.10.29","npm":"1.4.21"})
npm WARN engine boom@2.10.1: wanted: {"node":">=0.10.40"} (current: {"node":"0.10.29","npm":"1.4.21"})
npm WARN engine cryptiles@2.0.5: wanted: {"node":">=0.10.40"} (current: {"node":"0.10.29","npm":"1.4.21"})
In file included from ../src/validation.cc:15:0:
../node_modules/nan/nan.h:328:47: error: ‘REPLACE_INVALID_UTF8’ is not a member of ‘v8::String’
static const unsigned kReplaceInvalidUtf8 = v8::String::REPLACE_INVALID_UTF8;
^
make: *** [Release/obj.target/validation/src/validation.o] Ошибка 1
gyp ERR! build error
gyp ERR! stack Error: make failed with exit code: 2
gyp ERR! stack at ChildProcess.onExit (/usr/share/node-gyp/lib/build.js:267:23)
gyp ERR! stack at ChildProcess.emit (events.js:98:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:809:12)
gyp ERR! System Linux 3.16.0-4-686-pae
gyp ERR! command "nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/node_modules/iobroker.js-controller/node_modules/socket.io/node_modules/engine.io/node_modules/ws/node_modules/utf-8-validate
gyp ERR! node -v v0.10.29
gyp ERR! node-gyp -v v0.12.2
gyp ERR! not ok
npm WARN This failure might be due to the use of legacy binary "node"
npm WARN For further explanations, please read
/usr/share/doc/nodejs/README.Debian

In file included from ../src/bufferutil.cc:16:0:
../node_modules/nan/nan.h:328:47: error: ‘REPLACE_INVALID_UTF8’ is not a member of ‘v8::String’
static const unsigned kReplaceInvalidUtf8 = v8::String::REPLACE_INVALID_UTF8;
^
make: *** [Release/obj.target/bufferutil/src/bufferutil.o] Ошибка 1
gyp ERR! build error
gyp ERR! stack Error: make failed with exit code: 2
gyp ERR! stack at ChildProcess.onExit (/usr/share/node-gyp/lib/build.js:267:23)
gyp ERR! stack at ChildProcess.emit (events.js:98:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:809:12)
gyp ERR! System Linux 3.16.0-4-686-pae
gyp ERR! command "nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/node_modules/iobroker.js-controller/node_modules/socket.io/node_modules/engine.io/node_modules/ws/node_modules/bufferutil
gyp ERR! node -v v0.10.29
gyp ERR! node-gyp -v v0.12.2
gyp ERR! not ok
npm WARN optional dep failed, continuing utf-8-validate@1.2.1
npm WARN This failure might be due to the use of legacy binary "node"
npm WARN For further explanations, please read
/usr/share/doc/nodejs/README.Debian

In file included from ../src/validation.cc:15:0:
../node_modules/nan/nan.h:328:47: error: ‘REPLACE_INVALID_UTF8’ is not a member of ‘v8::String’
static const unsigned kReplaceInvalidUtf8 = v8::String::REPLACE_INVALID_UTF8;
^
make: *** [Release/obj.target/validation/src/validation.o] Ошибка 1
gyp ERR! build error
gyp ERR! stack Error: make failed with exit code: 2
gyp ERR! stack at ChildProcess.onExit (/usr/share/node-gyp/lib/build.js:267:23)
gyp ERR! stack at ChildProcess.emit (events.js:98:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:809:12)
gyp ERR! System Linux 3.16.0-4-686-pae
gyp ERR! command "nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/node_modules/iobroker.js-controller/node_modules/socket.io-client/node_modules/engine.io-client/node_modules/ws/node_modules/utf-8-validate
gyp ERR! node -v v0.10.29
gyp ERR! node-gyp -v v0.12.2
gyp ERR! not ok
npm WARN optional dep failed, continuing bufferutil@1.2.1
npm WARN This failure might be due to the use of legacy binary "node"
npm WARN For further explanations, please read
/usr/share/doc/nodejs/README.Debian

In file included from ../src/bufferutil.cc:16:0:
../node_modules/nan/nan.h:328:47: error: ‘REPLACE_INVALID_UTF8’ is not a member of ‘v8::String’
static const unsigned kReplaceInvalidUtf8 = v8::String::REPLACE_INVALID_UTF8;
^
make: *** [Release/obj.target/bufferutil/src/bufferutil.o] Ошибка 1
gyp ERR! build error
gyp ERR! stack Error: make failed with exit code: 2
gyp ERR! stack at ChildProcess.onExit (/usr/share/node-gyp/lib/build.js:267:23)
gyp ERR! stack at ChildProcess.emit (events.js:98:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:809:12)
gyp ERR! System Linux 3.16.0-4-686-pae
gyp ERR! command "nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/node_modules/iobroker.js-controller/node_modules/socket.io-client/node_modules/engine.io-client/node_modules/ws/node_modules/bufferutil
gyp ERR! node -v v0.10.29
gyp ERR! node-gyp -v v0.12.2
gyp ERR! not ok
npm WARN optional dep failed, continuing utf-8-validate@1.2.1
npm WARN This failure might be due to the use of legacy binary "node"
npm WARN For further explanations, please read
/usr/share/doc/nodejs/README.Debian

npm WARN optional dep failed, continuing bufferutil@1.2.1
npm install iobroker.admin --production --prefix /opt
npm WARN engine hawk@3.1.0: wanted: {"node":">=0.10.32"} (current: {"node":"0.10.29","npm":"1.4.21"})
npm WARN engine boom@2.10.1: wanted: {"node":">=0.10.40"} (current: {"node":"0.10.29","npm":"1.4.21"})
npm WARN engine hoek@2.16.3: wanted: {"node":">=0.10.40"} (current: {"node":"0.10.29","npm":"1.4.21"})
npm WARN engine cryptiles@2.0.5: wanted: {"node":">=0.10.40"} (current: {"node":"0.10.29","npm":"1.4.21"})
In file included from ../src/validation.cc:15:0:
../node_modules/nan/nan.h:328:47: error: ‘REPLACE_INVALID_UTF8’ is not a member of ‘v8::String’
static const unsigned kReplaceInvalidUtf8 = v8::String::REPLACE_INVALID_UTF8;
^
make: *** [Release/obj.target/validation/src/validation.o] Ошибка 1
gyp ERR! build error
gyp ERR! stack Error: make failed with exit code: 2
gyp ERR! stack at ChildProcess.onExit (/usr/share/node-gyp/lib/build.js:267:23)
gyp ERR! stack at ChildProcess.emit (events.js:98:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:809:12)
gyp ERR! System Linux 3.16.0-4-686-pae
gyp ERR! command "nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/node_modules/iobroker.admin/node_modules/socket.io/node_modules/engine.io/node_modules/ws/node_modules/utf-8-validate
gyp ERR! node -v v0.10.29
gyp ERR! node-gyp -v v0.12.2
gyp ERR! not ok
npm WARN This failure might be due to the use of legacy binary "node"
npm WARN For further explanations, please read
/usr/share/doc/nodejs/README.Debian

In file included from ../src/bufferutil.cc:16:0:
../node_modules/nan/nan.h:328:47: error: ‘REPLACE_INVALID_UTF8’ is not a member of ‘v8::String’
static const unsigned kReplaceInvalidUtf8 = v8::String::REPLACE_INVALID_UTF8;
^
make: *** [Release/obj.target/bufferutil/src/bufferutil.o] Ошибка 1
gyp ERR! build error
gyp ERR! stack Error: make failed with exit code: 2
gyp ERR! stack at ChildProcess.onExit (/usr/share/node-gyp/lib/build.js:267:23)
gyp ERR! stack at ChildProcess.emit (events.js:98:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:809:12)
gyp ERR! System Linux 3.16.0-4-686-pae
gyp ERR! command "nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/node_modules/iobroker.admin/node_modules/socket.io/node_modules/engine.io/node_modules/ws/node_modules/bufferutil
gyp ERR! node -v v0.10.29
gyp ERR! node-gyp -v v0.12.2
gyp ERR! not ok
npm WARN optional dep failed, continuing utf-8-validate@1.2.1
npm WARN This failure might be due to the use of legacy binary "node"
npm WARN For further explanations, please read
/usr/share/doc/nodejs/README.Debian

In file included from ../src/validation.cc:15:0:
../node_modules/nan/nan.h:328:47: error: ‘REPLACE_INVALID_UTF8’ is not a member of ‘v8::String’
static const unsigned kReplaceInvalidUtf8 = v8::String::REPLACE_INVALID_UTF8;
^
make: *** [Release/obj.target/validation/src/validation.o] Ошибка 1
gyp ERR! build error
gyp ERR! stack Error: make failed with exit code: 2
gyp ERR! stack at ChildProcess.onExit (/usr/share/node-gyp/lib/build.js:267:23)
gyp ERR! stack at ChildProcess.emit (events.js:98:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:809:12)
gyp ERR! System Linux 3.16.0-4-686-pae
gyp ERR! command "nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/node_modules/iobroker.admin/node_modules/socket.io/node_modules/socket.io-client/node_modules/engine.io-client/node_modules/ws/node_modules/utf-8-validate
gyp ERR! node -v v0.10.29
gyp ERR! node-gyp -v v0.12.2
gyp ERR! not ok
npm WARN optional dep failed, continuing bufferutil@1.2.1
npm WARN This failure might be due to the use of legacy binary "node"
npm WARN For further explanations, please read
/usr/share/doc/nodejs/README.Debian

In file included from ../src/bufferutil.cc:16:0:
../node_modules/nan/nan.h:328:47: error: ‘REPLACE_INVALID_UTF8’ is not a member of ‘v8::String’
static const unsigned kReplaceInvalidUtf8 = v8::String::REPLACE_INVALID_UTF8;
^
make: *** [Release/obj.target/bufferutil/src/bufferutil.o] Ошибка 1
gyp ERR! build error
gyp ERR! stack Error: make failed with exit code: 2
gyp ERR! stack at ChildProcess.onExit (/usr/share/node-gyp/lib/build.js:267:23)
gyp ERR! stack at ChildProcess.emit (events.js:98:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:809:12)
gyp ERR! System Linux 3.16.0-4-686-pae
gyp ERR! command "nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/node_modules/iobroker.admin/node_modules/socket.io/node_modules/socket.io-client/node_modules/engine.io-client/node_modules/ws/node_modules/bufferutil
gyp ERR! node -v v0.10.29
gyp ERR! node-gyp -v v0.12.2
gyp ERR! not ok
npm WARN optional dep failed, continuing utf-8-validate@1.2.1
npm WARN This failure might be due to the use of legacy binary "node"
npm WARN For further explanations, please read
/usr/share/doc/nodejs/README.Debian

npm WARN optional dep failed, continuing bufferutil@1.2.1
Non-critical error: EISDIR, illegal operation on a directory '/opt/node_modules/iobroker/lib/../../../iobroker'
iobroker@0.5.6 ../node_modules/iobroker
└── yargs@1.2.6 (minimist@0.1.0)
root@SmartHome:/opt/iobroker#

! ````

[aurodionov]

При помощи буна,гугла и какой-то матери я его поставил.
8294_zwite_log.txt

[Bluefox]

А что было то?

[aurodionov]

Вобщем встал криво, по моему что-то не то с кодировкой

! ````
root@SmartHome:/opt/iobroker# npm install iobroker
npm ERR! not a package /tmp/npm-1594-psWTuwUR/1446747427997-0.4993789638392627/tmp.tgz

iobroker@0.5.6 install /opt/iobroker/node_modules/iobroker
node lib/setup.js
! npm install iobroker.js-controller --production --prefix /opt/iobroker
npm WARN engine hawk@3.1.0: wanted: {"node":">=0.10.32"} (current: {"node":"0.10.29","npm":"1.4.21"})
npm WARN engine cryptiles@2.0.5: wanted: {"node":">=0.10.40"} (current: {"node":"0.10.29","npm":"1.4.21"})
npm WARN engine hoek@2.16.3: wanted: {"node":">=0.10.40"} (current: {"node":"0.10.29","npm":"1.4.21"})
npm WARN engine boom@2.10.1: wanted: {"node":">=0.10.40"} (current: {"node":"0.10.29","npm":"1.4.21"})
In file included from ../src/validation.cc:15:0:
../node_modules/nan/nan.h:328:47: error: ‘REPLACE_INVALID_UTF8’ is not a member of ‘v8::String’
static const unsigned kReplaceInvalidUtf8 = v8::String::REPLACE_INVALID_UTF8;
^
make: *** [Release/obj.target/validation/src/validation.o] Ошибка 1
gyp ERR! build error
gyp ERR! stack Error: make failed with exit code: 2
gyp ERR! stack at ChildProcess.onExit (/usr/share/node-gyp/lib/build.js:267:23)
gyp ERR! stack at ChildProcess.emit (events.js:98:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:809:12)
gyp ERR! System Linux 3.16.0-4-686-pae
gyp ERR! command "nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/iobroker/node_modules/iobroker.js-controller/node_modules/socket.io/node_modules/engine.io/node_modules/ws/node_modules/utf-8-validate
gyp ERR! node -v v0.10.29
gyp ERR! node-gyp -v v0.12.2
gyp ERR! not ok
npm WARN This failure might be due to the use of legacy binary "node"
npm WARN For further explanations, please read
/usr/share/doc/nodejs/README.Debian

In file included from ../src/bufferutil.cc:16:0:
../node_modules/nan/nan.h:328:47: error: ‘REPLACE_INVALID_UTF8’ is not a member of ‘v8::String’
static const unsigned kReplaceInvalidUtf8 = v8::String::REPLACE_INVALID_UTF8;
^
make: *** [Release/obj.target/bufferutil/src/bufferutil.o] Ошибка 1
gyp ERR! build error
gyp ERR! stack Error: make failed with exit code: 2
gyp ERR! stack at ChildProcess.onExit (/usr/share/node-gyp/lib/build.js:267:23)
gyp ERR! stack at ChildProcess.emit (events.js:98:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:809:12)
gyp ERR! System Linux 3.16.0-4-686-pae
gyp ERR! command "nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/iobroker/node_modules/iobroker.js-controller/node_modules/socket.io/node_modules/engine.io/node_modules/ws/node_modules/bufferutil
gyp ERR! node -v v0.10.29
gyp ERR! node-gyp -v v0.12.2
gyp ERR! not ok
npm WARN optional dep failed, continuing utf-8-validate@1.2.1
npm WARN This failure might be due to the use of legacy binary "node"
npm WARN For further explanations, please read
/usr/share/doc/nodejs/README.Debian

In file included from ../src/validation.cc:15:0:
../node_modules/nan/nan.h:328:47: error: ‘REPLACE_INVALID_UTF8’ is not a member of ‘v8::String’
static const unsigned kReplaceInvalidUtf8 = v8::String::REPLACE_INVALID_UTF8;
^
make: *** [Release/obj.target/validation/src/validation.o] Ошибка 1
gyp ERR! build error
gyp ERR! stack Error: make failed with exit code: 2
gyp ERR! stack at ChildProcess.onExit (/usr/share/node-gyp/lib/build.js:267:23)
gyp ERR! stack at ChildProcess.emit (events.js:98:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:809:12)
gyp ERR! System Linux 3.16.0-4-686-pae
gyp ERR! command "nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/iobroker/node_modules/iobroker.js-controller/node_modules/socket.io-client/node_modules/engine.io-client/node_modules/ws/node_modules/utf-8-validate
gyp ERR! node -v v0.10.29
gyp ERR! node-gyp -v v0.12.2
gyp ERR! not ok
npm WARN optional dep failed, continuing bufferutil@1.2.1
npm WARN This failure might be due to the use of legacy binary "node"
npm WARN For further explanations, please read
/usr/share/doc/nodejs/README.Debian

In file included from ../src/bufferutil.cc:16:0:
../node_modules/nan/nan.h:328:47: error: ‘REPLACE_INVALID_UTF8’ is not a member of ‘v8::String’
static const unsigned kReplaceInvalidUtf8 = v8::String::REPLACE_INVALID_UTF8;
^
make: *** [Release/obj.target/bufferutil/src/bufferutil.o] Ошибка 1
gyp ERR! build error
gyp ERR! stack Error: make failed with exit code: 2
gyp ERR! stack at ChildProcess.onExit (/usr/share/node-gyp/lib/build.js:267:23)
gyp ERR! stack at ChildProcess.emit (events.js:98:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:809:12)
gyp ERR! System Linux 3.16.0-4-686-pae
gyp ERR! command "nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/iobroker/node_modules/iobroker.js-controller/node_modules/socket.io-client/node_modules/engine.io-client/node_modules/ws/node_modules/bufferutil
gyp ERR! node -v v0.10.29
gyp ERR! node-gyp -v v0.12.2
gyp ERR! not ok
npm WARN optional dep failed, continuing utf-8-validate@1.2.1
npm WARN This failure might be due to the use of legacy binary "node"
npm WARN For further explanations, please read
/usr/share/doc/nodejs/README.Debian

npm WARN optional dep failed, continuing bufferutil@1.2.1
npm install iobroker.admin --production --prefix /opt/iobroker
npm WARN engine hawk@3.1.0: wanted: {"node":">=0.10.32"} (current: {"node":"0.10.29","npm":"1.4.21"})
npm WARN engine hoek@2.16.3: wanted: {"node":">=0.10.40"} (current: {"node":"0.10.29","npm":"1.4.21"})
npm WARN engine boom@2.10.1: wanted: {"node":">=0.10.40"} (current: {"node":"0.10.29","npm":"1.4.21"})
npm WARN engine cryptiles@2.0.5: wanted: {"node":">=0.10.40"} (current: {"node":"0.10.29","npm":"1.4.21"})
In file included from ../src/validation.cc:15:0:
../node_modules/nan/nan.h:328:47: error: ‘REPLACE_INVALID_UTF8’ is not a member of ‘v8::String’
static const unsigned kReplaceInvalidUtf8 = v8::String::REPLACE_INVALID_UTF8;
^
make: *** [Release/obj.target/validation/src/validation.o] Ошибка 1
gyp ERR! build error
gyp ERR! stack Error: make failed with exit code: 2
gyp ERR! stack at ChildProcess.onExit (/usr/share/node-gyp/lib/build.js:267:23)
gyp ERR! stack at ChildProcess.emit (events.js:98:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:809:12)
gyp ERR! System Linux 3.16.0-4-686-pae
gyp ERR! command "nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/iobroker/node_modules/iobroker.admin/node_modules/socket.io/node_modules/engine.io/node_modules/ws/node_modules/utf-8-validate
gyp ERR! node -v v0.10.29
gyp ERR! node-gyp -v v0.12.2
gyp ERR! not ok
npm WARN This failure might be due to the use of legacy binary "node"
npm WARN For further explanations, please read
/usr/share/doc/nodejs/README.Debian

In file included from ../src/bufferutil.cc:16:0:
../node_modules/nan/nan.h:328:47: error: ‘REPLACE_INVALID_UTF8’ is not a member of ‘v8::String’
static const unsigned kReplaceInvalidUtf8 = v8::String::REPLACE_INVALID_UTF8;
^
make: *** [Release/obj.target/bufferutil/src/bufferutil.o] Ошибка 1
gyp ERR! build error
gyp ERR! stack Error: make failed with exit code: 2
gyp ERR! stack at ChildProcess.onExit (/usr/share/node-gyp/lib/build.js:267:23)
gyp ERR! stack at ChildProcess.emit (events.js:98:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:809:12)
gyp ERR! System Linux 3.16.0-4-686-pae
gyp ERR! command "nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/iobroker/node_modules/iobroker.admin/node_modules/socket.io/node_modules/engine.io/node_modules/ws/node_modules/bufferutil
gyp ERR! node -v v0.10.29
gyp ERR! node-gyp -v v0.12.2
gyp ERR! not ok
npm WARN optional dep failed, continuing utf-8-validate@1.2.1
npm WARN This failure might be due to the use of legacy binary "node"
npm WARN For further explanations, please read
/usr/share/doc/nodejs/README.Debian

In file included from ../src/validation.cc:15:0:
../node_modules/nan/nan.h:328:47: error: ‘REPLACE_INVALID_UTF8’ is not a member of ‘v8::String’
static const unsigned kReplaceInvalidUtf8 = v8::String::REPLACE_INVALID_UTF8;
^
make: *** [Release/obj.target/validation/src/validation.o] Ошибка 1
gyp ERR! build error
gyp ERR! stack Error: make failed with exit code: 2
gyp ERR! stack at ChildProcess.onExit (/usr/share/node-gyp/lib/build.js:267:23)
gyp ERR! stack at ChildProcess.emit (events.js:98:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:809:12)
gyp ERR! System Linux 3.16.0-4-686-pae
gyp ERR! command "nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/iobroker/node_modules/iobroker.admin/node_modules/socket.io/node_modules/socket.io-client/node_modules/engine.io-client/node_modules/ws/node_modules/utf-8-validate
gyp ERR! node -v v0.10.29
gyp ERR! node-gyp -v v0.12.2
gyp ERR! not ok
npm WARN optional dep failed, continuing bufferutil@1.2.1
npm WARN This failure might be due to the use of legacy binary "node"
npm WARN For further explanations, please read
/usr/share/doc/nodejs/README.Debian

In file included from ../src/bufferutil.cc:16:0:
../node_modules/nan/nan.h:328:47: error: ‘REPLACE_INVALID_UTF8’ is not a member of ‘v8::String’
static const unsigned kReplaceInvalidUtf8 = v8::String::REPLACE_INVALID_UTF8;
^
make: *** [Release/obj.target/bufferutil/src/bufferutil.o] Ошибка 1
gyp ERR! build error
gyp ERR! stack Error: make failed with exit code: 2
gyp ERR! stack at ChildProcess.onExit (/usr/share/node-gyp/lib/build.js:267:23)
gyp ERR! stack at ChildProcess.emit (events.js:98:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:809:12)
gyp ERR! System Linux 3.16.0-4-686-pae
gyp ERR! command "nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/iobroker/node_modules/iobroker.admin/node_modules/socket.io/node_modules/socket.io-client/node_modules/engine.io-client/node_modules/ws/node_modules/bufferutil
gyp ERR! node -v v0.10.29
gyp ERR! node-gyp -v v0.12.2
gyp ERR! not ok
npm WARN optional dep failed, continuing utf-8-validate@1.2.1
npm WARN This failure might be due to the use of legacy binary "node"
npm WARN For further explanations, please read
/usr/share/doc/nodejs/README.Debian

npm WARN optional dep failed, continuing bufferutil@1.2.1
Write "./iobroker start" to start the ioBroker
Auto-start was enabled. Write "update-rc.d -f iobroker.sh remove" to disable auto-start
iobroker is started. Go to "http://ip-addr:8081" to open the admin UI.
iobroker@0.5.6 node_modules/iobroker
└── yargs@1.2.6 (minimist@0.1.0)
root@SmartHome:/opt/iobroker# node -v
v0.10.29

! ````
Копаю дальше, натянул виз, не открывается

[Haus]

Привет всем

Вчера мучался пол дня с установкой Iobroker на Debian, сначала думал может какие проблемы с 8.2 (кстати nodejs есть в репозитариях) накатил 7.9 та же фигня ошибок и варнингов при установке кучи. Перечитал все способы установки и вуаля.

Debian 8.2 чистый под "root"

apt-get update
apt-get upgrade
apt-get install curl
apt-get install build-essential
curl -sL https://deb.nodesource.com/setup | bash -
apt-get install nodejs
mkdir /opt/iobroker
chmod 777 /opt/iobroker
cd /opt/iobroker
npm install iobroker

Проблемы с nodejs и npm в репозитах они старые и с кодировкой чего то не то если кому пригодится отпешитесь о результатах

Вопрос к Bluefox не приходят обновления драйверов всё остальное как часы?

! root@Server1:~# cd /opt/iobroker
! root@Server1:/opt/iobroker# iobroker update
! update done
! Adapter "zwave" : 0.2.3
! Adapter "yr" : 0.1.9 , installed 0.1.9
! Adapter "wolf" : 0.0.9
! Adapter "web" : 1.2.1 , installed 1.2.1
! Adapter "vis-timeandweather": 0.0.2 , installed 0.0.2
! Adapter "vis-rgraph" : 0.0.2 , installed 0.0.2
! Adapter "vis-plumb" : 0.1.6
! Adapter "vis-metro" : 0.1.9
! Adapter "vis-lcars" : 0.1.6
! Adapter "vis-keyboard" : 0.0.2
! Adapter "vis-jqui-mfd" : 0.1.0
! Adapter "vis-hqwidgets" : 0.2.2 , installed 0.2.2
! Adapter "vis-google-fonts": 0.1.0
! Adapter "vis-fancyswitch": 0.1.0
! Adapter "vis-colorpicker": 0.1.1
! Adapter "vis-bars" : 0.1.1
! Adapter "vis" : 0.7.7 , installed 0.7.7
! Adapter "terminal" : 0.1.2
! Adapter "sonos" : 0.1.7
! Adapter "rickshaw" : 0.2.2 , installed 0.2.2
! Adapter "pushover" : 0.1.1
! Adapter "pushbullet" : 0.0.11
! Adapter "owfs" : 0.0.2 , installed 0.0.2
! Adapter "onkyo" : 0.1.9
! Adapter "socketio" : 1.0.0
! Adapter "simple-api" : 1.0.0
! Adapter "scenes" : 0.2.2
! Adapter "sayit" : 0.3.15 , installed 0.3.15
! Adapter "s7" : 0.2.4
! Adapter "ping" : 0.1.4
! Adapter "node-red" : 0.3.5
! Adapter "mqtt" : 0.2.15
! Adapter "modbus" : 0.3.9
! Adapter "mobile" : 0.0.5
! Adapter "megad" : 1.0.6 , installed 1.0.6
! Adapter "knx" : 0.2.10
! Controller "js-controller" : 0.7.15 , installed 0.7.15
! Adapter "javascript" : 1.0.7 , installed 1.0.7
! Adapter "icons-ultimate-png": 0.1.0
! Adapter "icons-open-icon-library-png": 0.1.1
! Adapter "icons-mfd-svg" : 0.1.2
! Adapter "icons-mfd-png" : 0.1.2
! Adapter "icons-material-svg": 0.1.0
! Adapter "icons-material-png": 0.1.0
! Adapter "icons-addictive-flavour-png": 0.1.0
! Adapter "ical" : 1.1.1 , installed 1.1.1
! Adapter "hmm" : 1.0.0
! Adapter "hue" : 0.5.1
! Adapter "hm-rpc" : 0.5.2
! Adapter "hm-rega" : 0.2.2
! Adapter "history" : 0.1.3 , installed 0.1.3
! Adapter "harmony" : 0.5.4
! Adapter "example" : 0.1.1 , installed 0.1.1
! Adapter "fritzbox" : 0.2.1
! Adapter "flot" : 0.1.1 , installed 0.1.1
! Adapter "email" : 0.1.2
! Adapter "dwd" : 1.0.1
! Adapter "cul" : 0.0.4
! Adapter "b-control-em" : 0.1.1
! Adapter "artnet" : 0.0.3
! Adapter "admin" : 0.6.6 , installed 0.6.6

[Haus]

@Haus:

Привет всем

Вчера мучался пол дня с установкой Iobroker на Debian, сначала думал может какие проблемы с 8.2 (кстати nodejs есть в репозитариях) накатил 7.9 та же фигня ошибок и варнингов при установке кучи. Перечитал все способы установки и вуаля.

Debian 8.2 чистый под "root"

apt-get update
apt-get upgrade
apt-get install curl
apt-get install build-essential
curl -sL https://deb.nodesource.com/setup | bash -
apt-get install nodejs
mkdir /opt/iobroker
chmod 777 /opt/iobroker
cd /opt/iobroker
npm install iobroker

Проблемы с nodejs и npm в репозитах они старые и с кодировкой чего то не то если кому пригодится отпешитесь о результатах

Вопрос к Bluefox не приходят обновления драйверов всё остальное как часы?

! root@Server1:~# cd /opt/iobroker
! root@Server1:/opt/iobroker# iobroker update
! update done
! Adapter "zwave" : 0.2.3
! Adapter "yr" : 0.1.9 , installed 0.1.9
! Adapter "wolf" : 0.0.9
! Adapter "web" : 1.2.1 , installed 1.2.1
! Adapter "vis-timeandweather": 0.0.2 , installed 0.0.2
! Adapter "vis-rgraph" : 0.0.2 , installed 0.0.2
! Adapter "vis-plumb" : 0.1.6
! Adapter "vis-metro" : 0.1.9
! Adapter "vis-lcars" : 0.1.6
! Adapter "vis-keyboard" : 0.0.2
! Adapter "vis-jqui-mfd" : 0.1.0
! Adapter "vis-hqwidgets" : 0.2.2 , installed 0.2.2
! Adapter "vis-google-fonts": 0.1.0
! Adapter "vis-fancyswitch": 0.1.0
! Adapter "vis-colorpicker": 0.1.1
! Adapter "vis-bars" : 0.1.1
! Adapter "vis" : 0.7.7 , installed 0.7.7
! Adapter "terminal" : 0.1.2
! Adapter "sonos" : 0.1.7
! Adapter "rickshaw" : 0.2.2 , installed 0.2.2
! Adapter "pushover" : 0.1.1
! Adapter "pushbullet" : 0.0.11
! Adapter "owfs" : 0.0.2 , installed 0.0.2
! Adapter "onkyo" : 0.1.9
! Adapter "socketio" : 1.0.0
! Adapter "simple-api" : 1.0.0
! Adapter "scenes" : 0.2.2
! Adapter "sayit" : 0.3.15 , installed 0.3.15
! Adapter "s7" : 0.2.4
! Adapter "ping" : 0.1.4
! Adapter "node-red" : 0.3.5
! Adapter "mqtt" : 0.2.15
! Adapter "modbus" : 0.3.9
! Adapter "mobile" : 0.0.5
! Adapter "megad" : 1.0.6 , installed 1.0.6
! Adapter "knx" : 0.2.10
! Controller "js-controller" : 0.7.15 , installed 0.7.15
! Adapter "javascript" : 1.0.7 , installed 1.0.7
! Adapter "icons-ultimate-png": 0.1.0
! Adapter "icons-open-icon-library-png": 0.1.1
! Adapter "icons-mfd-svg" : 0.1.2
! Adapter "icons-mfd-png" : 0.1.2
! Adapter "icons-material-svg": 0.1.0
! Adapter "icons-material-png": 0.1.0
! Adapter "icons-addictive-flavour-png": 0.1.0
! Adapter "ical" : 1.1.1 , installed 1.1.1
! Adapter "hmm" : 1.0.0
! Adapter "hue" : 0.5.1
! Adapter "hm-rpc" : 0.5.2
! Adapter "hm-rega" : 0.2.2
! Adapter "history" : 0.1.3 , installed 0.1.3
! Adapter "harmony" : 0.5.4
! Adapter "example" : 0.1.1 , installed 0.1.1
! Adapter "fritzbox" : 0.2.1
! Adapter "flot" : 0.1.1 , installed 0.1.1
! Adapter "email" : 0.1.2
! Adapter "dwd" : 1.0.1
! Adapter "cul" : 0.0.4
! Adapter "b-control-em" : 0.1.1
! Adapter "artnet" : 0.0.3
! Adapter "admin" : 0.6.6 , installed 0.6.6 `

Сам себе и отвечу

Нет обновлений.

На гите рабочие версии, которые ни в коем случае нельзя устанавливать, если не знаешь javascript.

Процесс разработки следующий. Я сначала заливаю версию на гит (она может быть и не рабочей). Потом прошу пользователей, кто не боится трудностей и способен определить проблемы установить эти версии специальной командой.

Если у них бежит, то я заливаю версию на npm и вот оттуда она доступна всем.

Почему у тебя показываются версии с гита надо ещё выяснить.

Рабочую версию, кстати, можно посмотреть здесь http://iobroker.net:8081 и http://iobroker.net:8082/vis/edit.html

[electric69]

Пытаюсь установить iobroker на bananapi образ http://www.armbian.com/banana-pi/.

NodeJS и NPM https://github.com/nodejs/node-v0.x-archive/wiki/Installing-Node.js-via-package-manager#debian-and-ubuntu-based-linux-distributions без проблем:

root@bananapi:/# nodejs -v
v5.1.1
root@bananapi:/# npm -v
3.3.12
root@bananapi:/#

Затем:

$ cd /opt
$ mkdir iobroker
$ cd iobroker
$ sudo npm install iobroker

Ошибка:
50_pic_32.jpg

[Bluefox]

sudo npm install iobroker

[electric69]

@Bluefox:

sudo npm install iobroker `
Тоже самое.

Даже пробовал:

root@bananapi:/opt/iobroker# ln -s /usr/bin/nodejs /usr/bin/node
ln: failed to create symbolic link ‘/usr/bin/node’: File exists
root@bananapi:/opt/iobroker#

Говорит ссылка уже есть…

Я так понимаю, что нет прав на запись?

Хотя директорию node_modules и вложенные в нее создает...
50_pic_33.jpg
50_pic_34.jpg

[Bluefox]

А если

sudo npm install iobroker --unsafe-perm

?

[electric69]

@Bluefox:

А если

sudo npm install iobroker --unsafe-perm

```` `  

Вроде прокатило))

Устанавливаю драйвера…
50_pic_35.jpg
7614_screenshot_2018-10-18_21.29.09.png