Инсталляция под Linux

Bluefox

Попробуй: sudo npm install iobroker
4867_skript.jpg

MSapogov

~~@Bluefox:~~

Попробуй: sudo npm install iobroker `
Я все запускал от root-а.

Все оказалось очень просто…

Установка node из репозитория.

chmod 777 /opt/iobroker

и ссылка на "node" с помощью команды "sudo ln -s /usr/bin/nodejs /usr/bin/node"

После этого

npm install iobroker

Прошла как по маслу...

Спасибо.

Bluefox

Надо внести в инструкцию:
` > Firts check if node.js is installed. You can do it with command node -v.

If you got an answer, you can continue with the installation.

If not. Try to install node.js with apt-get install nodejs.

Sometimes node.js has not installed the soft link. If you see outputs with /usr/bin/nodejs -v, following can help:

ln -s /usr/bin/nodejs /usr/bin/node `

ford7

~~@ford7:~~

Подскажите, как починить?

вкладка "драйвера" пустая.

upd:

вкладка "сервера" тоже пустая.

А в настройках все штатно: `
Вот при каждой попытке обновления js-controller происходит такая штука. Приходится заново руками js-controller устанавливать. Может у меня чего-то не так установилось изначально или строки какой-нить не хватает?

electric69

~~@ford7:~~

~~@ford7:~~

Подскажите, как починить?

вкладка "драйвера" пустая.

upd:

вкладка "сервера" тоже пустая.

А в настройках все штатно: Вот при ****каждой**** попытке обновления js-controller происходит такая штука. Приходится заново руками js-controller устанавливать. Может у меня чего-то не так установилось изначально или строки какой-нить не хватает?
Попробуй поиграться с правами на папку iobroker. Мне помогло вроде…

aurodionov

Сегодня "пал смертью храбрых" хард на неттопе где крутился iobroker, вагон бедов

Отсель вопрос как быстро натянуть назад iobroker, ставил в первые версии, всё руками и исходников, что изменилось

Сори ,что спрашиваю не перелопатив ветки и вики.

Bluefox

ioBroker ставится 4мя командами:

sudo mkdir /opt/iobroker
cd /opt/iobroker
sudo chmod 777 .
sudo npm install iobroker

aurodionov

Поменял хард, накатил debian 8.2.0, node, ставлю iobroker и получаю вагон варнингов и ошибок

Может чего не установилось или забыл поставить, прошлый раз ноду собирал из сырцов, сейчас водрузил с репо

! ````
root@SmartHome:/opt/iobroker# npm install iobroker

iobroker@0.5.6 install /opt/node_modules/iobroker
node lib/setup.js
! npm install iobroker.js-controller --production --prefix /opt
npm WARN engine hawk@3.1.0: wanted: {"node":">=0.10.32"} (current: {"node":"0.10.29","npm":"1.4.21"})
npm WARN engine hoek@2.16.3: wanted: {"node":">=0.10.40"} (current: {"node":"0.10.29","npm":"1.4.21"})
npm WARN engine boom@2.10.1: wanted: {"node":">=0.10.40"} (current: {"node":"0.10.29","npm":"1.4.21"})
npm WARN engine cryptiles@2.0.5: wanted: {"node":">=0.10.40"} (current: {"node":"0.10.29","npm":"1.4.21"})
In file included from ../src/validation.cc:15:0:
../node_modules/nan/nan.h:328:47: error: ‘REPLACE_INVALID_UTF8’ is not a member of ‘v8::String’
static const unsigned kReplaceInvalidUtf8 = v8::String::REPLACE_INVALID_UTF8;
^
make: *** [Release/obj.target/validation/src/validation.o] Ошибка 1
gyp ERR! build error
gyp ERR! stack Error: make failed with exit code: 2
gyp ERR! stack at ChildProcess.onExit (/usr/share/node-gyp/lib/build.js:267:23)
gyp ERR! stack at ChildProcess.emit (events.js:98:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:809:12)
gyp ERR! System Linux 3.16.0-4-686-pae
gyp ERR! command "nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/node_modules/iobroker.js-controller/node_modules/socket.io/node_modules/engine.io/node_modules/ws/node_modules/utf-8-validate
gyp ERR! node -v v0.10.29
gyp ERR! node-gyp -v v0.12.2
gyp ERR! not ok
npm WARN This failure might be due to the use of legacy binary "node"
npm WARN For further explanations, please read
/usr/share/doc/nodejs/README.Debian

In file included from ../src/bufferutil.cc:16:0:
../node_modules/nan/nan.h:328:47: error: ‘REPLACE_INVALID_UTF8’ is not a member of ‘v8::String’
static const unsigned kReplaceInvalidUtf8 = v8::String::REPLACE_INVALID_UTF8;
^
make: *** [Release/obj.target/bufferutil/src/bufferutil.o] Ошибка 1
gyp ERR! build error
gyp ERR! stack Error: make failed with exit code: 2
gyp ERR! stack at ChildProcess.onExit (/usr/share/node-gyp/lib/build.js:267:23)
gyp ERR! stack at ChildProcess.emit (events.js:98:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:809:12)
gyp ERR! System Linux 3.16.0-4-686-pae
gyp ERR! command "nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/node_modules/iobroker.js-controller/node_modules/socket.io/node_modules/engine.io/node_modules/ws/node_modules/bufferutil
gyp ERR! node -v v0.10.29
gyp ERR! node-gyp -v v0.12.2
gyp ERR! not ok
npm WARN optional dep failed, continuing utf-8-validate@1.2.1
npm WARN This failure might be due to the use of legacy binary "node"
npm WARN For further explanations, please read
/usr/share/doc/nodejs/README.Debian

In file included from ../src/validation.cc:15:0:
../node_modules/nan/nan.h:328:47: error: ‘REPLACE_INVALID_UTF8’ is not a member of ‘v8::String’
static const unsigned kReplaceInvalidUtf8 = v8::String::REPLACE_INVALID_UTF8;
^
make: *** [Release/obj.target/validation/src/validation.o] Ошибка 1
gyp ERR! build error
gyp ERR! stack Error: make failed with exit code: 2
gyp ERR! stack at ChildProcess.onExit (/usr/share/node-gyp/lib/build.js:267:23)
gyp ERR! stack at ChildProcess.emit (events.js:98:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:809:12)
gyp ERR! System Linux 3.16.0-4-686-pae
gyp ERR! command "nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/node_modules/iobroker.js-controller/node_modules/socket.io-client/node_modules/engine.io-client/node_modules/ws/node_modules/utf-8-validate
gyp ERR! node -v v0.10.29
gyp ERR! node-gyp -v v0.12.2
gyp ERR! not ok
npm WARN optional dep failed, continuing bufferutil@1.2.1
npm WARN This failure might be due to the use of legacy binary "node"
npm WARN For further explanations, please read
/usr/share/doc/nodejs/README.Debian

In file included from ../src/bufferutil.cc:16:0:
../node_modules/nan/nan.h:328:47: error: ‘REPLACE_INVALID_UTF8’ is not a member of ‘v8::String’
static const unsigned kReplaceInvalidUtf8 = v8::String::REPLACE_INVALID_UTF8;
^
make: *** [Release/obj.target/bufferutil/src/bufferutil.o] Ошибка 1
gyp ERR! build error
gyp ERR! stack Error: make failed with exit code: 2
gyp ERR! stack at ChildProcess.onExit (/usr/share/node-gyp/lib/build.js:267:23)
gyp ERR! stack at ChildProcess.emit (events.js:98:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:809:12)
gyp ERR! System Linux 3.16.0-4-686-pae
gyp ERR! command "nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/node_modules/iobroker.js-controller/node_modules/socket.io-client/node_modules/engine.io-client/node_modules/ws/node_modules/bufferutil
gyp ERR! node -v v0.10.29
gyp ERR! node-gyp -v v0.12.2
gyp ERR! not ok
npm WARN optional dep failed, continuing utf-8-validate@1.2.1
npm WARN This failure might be due to the use of legacy binary "node"
npm WARN For further explanations, please read
/usr/share/doc/nodejs/README.Debian

npm WARN optional dep failed, continuing bufferutil@1.2.1
npm install iobroker.admin --production --prefix /opt
npm WARN engine hawk@3.1.0: wanted: {"node":">=0.10.32"} (current: {"node":"0.10.29","npm":"1.4.21"})
npm WARN engine boom@2.10.1: wanted: {"node":">=0.10.40"} (current: {"node":"0.10.29","npm":"1.4.21"})
npm WARN engine hoek@2.16.3: wanted: {"node":">=0.10.40"} (current: {"node":"0.10.29","npm":"1.4.21"})
npm WARN engine cryptiles@2.0.5: wanted: {"node":">=0.10.40"} (current: {"node":"0.10.29","npm":"1.4.21"})
In file included from ../src/validation.cc:15:0:
../node_modules/nan/nan.h:328:47: error: ‘REPLACE_INVALID_UTF8’ is not a member of ‘v8::String’
static const unsigned kReplaceInvalidUtf8 = v8::String::REPLACE_INVALID_UTF8;
^
make: *** [Release/obj.target/validation/src/validation.o] Ошибка 1
gyp ERR! build error
gyp ERR! stack Error: make failed with exit code: 2
gyp ERR! stack at ChildProcess.onExit (/usr/share/node-gyp/lib/build.js:267:23)
gyp ERR! stack at ChildProcess.emit (events.js:98:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:809:12)
gyp ERR! System Linux 3.16.0-4-686-pae
gyp ERR! command "nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/node_modules/iobroker.admin/node_modules/socket.io/node_modules/engine.io/node_modules/ws/node_modules/utf-8-validate
gyp ERR! node -v v0.10.29
gyp ERR! node-gyp -v v0.12.2
gyp ERR! not ok
npm WARN This failure might be due to the use of legacy binary "node"
npm WARN For further explanations, please read
/usr/share/doc/nodejs/README.Debian

In file included from ../src/bufferutil.cc:16:0:
../node_modules/nan/nan.h:328:47: error: ‘REPLACE_INVALID_UTF8’ is not a member of ‘v8::String’
static const unsigned kReplaceInvalidUtf8 = v8::String::REPLACE_INVALID_UTF8;
^
make: *** [Release/obj.target/bufferutil/src/bufferutil.o] Ошибка 1
gyp ERR! build error
gyp ERR! stack Error: make failed with exit code: 2
gyp ERR! stack at ChildProcess.onExit (/usr/share/node-gyp/lib/build.js:267:23)
gyp ERR! stack at ChildProcess.emit (events.js:98:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:809:12)
gyp ERR! System Linux 3.16.0-4-686-pae
gyp ERR! command "nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/node_modules/iobroker.admin/node_modules/socket.io/node_modules/engine.io/node_modules/ws/node_modules/bufferutil
gyp ERR! node -v v0.10.29
gyp ERR! node-gyp -v v0.12.2
gyp ERR! not ok
npm WARN optional dep failed, continuing utf-8-validate@1.2.1
npm WARN This failure might be due to the use of legacy binary "node"
npm WARN For further explanations, please read
/usr/share/doc/nodejs/README.Debian

In file included from ../src/validation.cc:15:0:
../node_modules/nan/nan.h:328:47: error: ‘REPLACE_INVALID_UTF8’ is not a member of ‘v8::String’
static const unsigned kReplaceInvalidUtf8 = v8::String::REPLACE_INVALID_UTF8;
^
make: *** [Release/obj.target/validation/src/validation.o] Ошибка 1
gyp ERR! build error
gyp ERR! stack Error: make failed with exit code: 2
gyp ERR! stack at ChildProcess.onExit (/usr/share/node-gyp/lib/build.js:267:23)
gyp ERR! stack at ChildProcess.emit (events.js:98:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:809:12)
gyp ERR! System Linux 3.16.0-4-686-pae
gyp ERR! command "nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/node_modules/iobroker.admin/node_modules/socket.io/node_modules/socket.io-client/node_modules/engine.io-client/node_modules/ws/node_modules/utf-8-validate
gyp ERR! node -v v0.10.29
gyp ERR! node-gyp -v v0.12.2
gyp ERR! not ok
npm WARN optional dep failed, continuing bufferutil@1.2.1
npm WARN This failure might be due to the use of legacy binary "node"
npm WARN For further explanations, please read
/usr/share/doc/nodejs/README.Debian

In file included from ../src/bufferutil.cc:16:0:
../node_modules/nan/nan.h:328:47: error: ‘REPLACE_INVALID_UTF8’ is not a member of ‘v8::String’
static const unsigned kReplaceInvalidUtf8 = v8::String::REPLACE_INVALID_UTF8;
^
make: *** [Release/obj.target/bufferutil/src/bufferutil.o] Ошибка 1
gyp ERR! build error
gyp ERR! stack Error: make failed with exit code: 2
gyp ERR! stack at ChildProcess.onExit (/usr/share/node-gyp/lib/build.js:267:23)
gyp ERR! stack at ChildProcess.emit (events.js:98:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:809:12)
gyp ERR! System Linux 3.16.0-4-686-pae
gyp ERR! command "nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/node_modules/iobroker.admin/node_modules/socket.io/node_modules/socket.io-client/node_modules/engine.io-client/node_modules/ws/node_modules/bufferutil
gyp ERR! node -v v0.10.29
gyp ERR! node-gyp -v v0.12.2
gyp ERR! not ok
npm WARN optional dep failed, continuing utf-8-validate@1.2.1
npm WARN This failure might be due to the use of legacy binary "node"
npm WARN For further explanations, please read
/usr/share/doc/nodejs/README.Debian

npm WARN optional dep failed, continuing bufferutil@1.2.1
Non-critical error: EISDIR, illegal operation on a directory '/opt/node_modules/iobroker/lib/../../../iobroker'
iobroker@0.5.6 ../node_modules/iobroker
└── yargs@1.2.6 (minimist@0.1.0)
root@SmartHome:/opt/iobroker#

! ````

aurodionov

При помощи буна,гугла и какой-то матери я его поставил.
8294_zwite_log.txt

Bluefox

А что было то?

aurodionov

Вобщем встал криво, по моему что-то не то с кодировкой

! ````
root@SmartHome:/opt/iobroker# npm install iobroker
npm ERR! not a package /tmp/npm-1594-psWTuwUR/1446747427997-0.4993789638392627/tmp.tgz

iobroker@0.5.6 install /opt/iobroker/node_modules/iobroker
node lib/setup.js
! npm install iobroker.js-controller --production --prefix /opt/iobroker
npm WARN engine hawk@3.1.0: wanted: {"node":">=0.10.32"} (current: {"node":"0.10.29","npm":"1.4.21"})
npm WARN engine cryptiles@2.0.5: wanted: {"node":">=0.10.40"} (current: {"node":"0.10.29","npm":"1.4.21"})
npm WARN engine hoek@2.16.3: wanted: {"node":">=0.10.40"} (current: {"node":"0.10.29","npm":"1.4.21"})
npm WARN engine boom@2.10.1: wanted: {"node":">=0.10.40"} (current: {"node":"0.10.29","npm":"1.4.21"})
In file included from ../src/validation.cc:15:0:
../node_modules/nan/nan.h:328:47: error: ‘REPLACE_INVALID_UTF8’ is not a member of ‘v8::String’
static const unsigned kReplaceInvalidUtf8 = v8::String::REPLACE_INVALID_UTF8;
^
make: *** [Release/obj.target/validation/src/validation.o] Ошибка 1
gyp ERR! build error
gyp ERR! stack Error: make failed with exit code: 2
gyp ERR! stack at ChildProcess.onExit (/usr/share/node-gyp/lib/build.js:267:23)
gyp ERR! stack at ChildProcess.emit (events.js:98:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:809:12)
gyp ERR! System Linux 3.16.0-4-686-pae
gyp ERR! command "nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/iobroker/node_modules/iobroker.js-controller/node_modules/socket.io/node_modules/engine.io/node_modules/ws/node_modules/utf-8-validate
gyp ERR! node -v v0.10.29
gyp ERR! node-gyp -v v0.12.2
gyp ERR! not ok
npm WARN This failure might be due to the use of legacy binary "node"
npm WARN For further explanations, please read
/usr/share/doc/nodejs/README.Debian

In file included from ../src/bufferutil.cc:16:0:
../node_modules/nan/nan.h:328:47: error: ‘REPLACE_INVALID_UTF8’ is not a member of ‘v8::String’
static const unsigned kReplaceInvalidUtf8 = v8::String::REPLACE_INVALID_UTF8;
^
make: *** [Release/obj.target/bufferutil/src/bufferutil.o] Ошибка 1
gyp ERR! build error
gyp ERR! stack Error: make failed with exit code: 2
gyp ERR! stack at ChildProcess.onExit (/usr/share/node-gyp/lib/build.js:267:23)
gyp ERR! stack at ChildProcess.emit (events.js:98:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:809:12)
gyp ERR! System Linux 3.16.0-4-686-pae
gyp ERR! command "nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/iobroker/node_modules/iobroker.js-controller/node_modules/socket.io/node_modules/engine.io/node_modules/ws/node_modules/bufferutil
gyp ERR! node -v v0.10.29
gyp ERR! node-gyp -v v0.12.2
gyp ERR! not ok
npm WARN optional dep failed, continuing utf-8-validate@1.2.1
npm WARN This failure might be due to the use of legacy binary "node"
npm WARN For further explanations, please read
/usr/share/doc/nodejs/README.Debian

In file included from ../src/validation.cc:15:0:
../node_modules/nan/nan.h:328:47: error: ‘REPLACE_INVALID_UTF8’ is not a member of ‘v8::String’
static const unsigned kReplaceInvalidUtf8 = v8::String::REPLACE_INVALID_UTF8;
^
make: *** [Release/obj.target/validation/src/validation.o] Ошибка 1
gyp ERR! build error
gyp ERR! stack Error: make failed with exit code: 2
gyp ERR! stack at ChildProcess.onExit (/usr/share/node-gyp/lib/build.js:267:23)
gyp ERR! stack at ChildProcess.emit (events.js:98:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:809:12)
gyp ERR! System Linux 3.16.0-4-686-pae
gyp ERR! command "nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/iobroker/node_modules/iobroker.js-controller/node_modules/socket.io-client/node_modules/engine.io-client/node_modules/ws/node_modules/utf-8-validate
gyp ERR! node -v v0.10.29
gyp ERR! node-gyp -v v0.12.2
gyp ERR! not ok
npm WARN optional dep failed, continuing bufferutil@1.2.1
npm WARN This failure might be due to the use of legacy binary "node"
npm WARN For further explanations, please read
/usr/share/doc/nodejs/README.Debian

In file included from ../src/bufferutil.cc:16:0:
../node_modules/nan/nan.h:328:47: error: ‘REPLACE_INVALID_UTF8’ is not a member of ‘v8::String’
static const unsigned kReplaceInvalidUtf8 = v8::String::REPLACE_INVALID_UTF8;
^
make: *** [Release/obj.target/bufferutil/src/bufferutil.o] Ошибка 1
gyp ERR! build error
gyp ERR! stack Error: make failed with exit code: 2
gyp ERR! stack at ChildProcess.onExit (/usr/share/node-gyp/lib/build.js:267:23)
gyp ERR! stack at ChildProcess.emit (events.js:98:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:809:12)
gyp ERR! System Linux 3.16.0-4-686-pae
gyp ERR! command "nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/iobroker/node_modules/iobroker.js-controller/node_modules/socket.io-client/node_modules/engine.io-client/node_modules/ws/node_modules/bufferutil
gyp ERR! node -v v0.10.29
gyp ERR! node-gyp -v v0.12.2
gyp ERR! not ok
npm WARN optional dep failed, continuing utf-8-validate@1.2.1
npm WARN This failure might be due to the use of legacy binary "node"
npm WARN For further explanations, please read
/usr/share/doc/nodejs/README.Debian

npm WARN optional dep failed, continuing bufferutil@1.2.1
npm install iobroker.admin --production --prefix /opt/iobroker
npm WARN engine hawk@3.1.0: wanted: {"node":">=0.10.32"} (current: {"node":"0.10.29","npm":"1.4.21"})
npm WARN engine hoek@2.16.3: wanted: {"node":">=0.10.40"} (current: {"node":"0.10.29","npm":"1.4.21"})
npm WARN engine boom@2.10.1: wanted: {"node":">=0.10.40"} (current: {"node":"0.10.29","npm":"1.4.21"})
npm WARN engine cryptiles@2.0.5: wanted: {"node":">=0.10.40"} (current: {"node":"0.10.29","npm":"1.4.21"})
In file included from ../src/validation.cc:15:0:
../node_modules/nan/nan.h:328:47: error: ‘REPLACE_INVALID_UTF8’ is not a member of ‘v8::String’
static const unsigned kReplaceInvalidUtf8 = v8::String::REPLACE_INVALID_UTF8;
^
make: *** [Release/obj.target/validation/src/validation.o] Ошибка 1
gyp ERR! build error
gyp ERR! stack Error: make failed with exit code: 2
gyp ERR! stack at ChildProcess.onExit (/usr/share/node-gyp/lib/build.js:267:23)
gyp ERR! stack at ChildProcess.emit (events.js:98:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:809:12)
gyp ERR! System Linux 3.16.0-4-686-pae
gyp ERR! command "nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/iobroker/node_modules/iobroker.admin/node_modules/socket.io/node_modules/engine.io/node_modules/ws/node_modules/utf-8-validate
gyp ERR! node -v v0.10.29
gyp ERR! node-gyp -v v0.12.2
gyp ERR! not ok
npm WARN This failure might be due to the use of legacy binary "node"
npm WARN For further explanations, please read
/usr/share/doc/nodejs/README.Debian

In file included from ../src/bufferutil.cc:16:0:
../node_modules/nan/nan.h:328:47: error: ‘REPLACE_INVALID_UTF8’ is not a member of ‘v8::String’
static const unsigned kReplaceInvalidUtf8 = v8::String::REPLACE_INVALID_UTF8;
^
make: *** [Release/obj.target/bufferutil/src/bufferutil.o] Ошибка 1
gyp ERR! build error
gyp ERR! stack Error: make failed with exit code: 2
gyp ERR! stack at ChildProcess.onExit (/usr/share/node-gyp/lib/build.js:267:23)
gyp ERR! stack at ChildProcess.emit (events.js:98:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:809:12)
gyp ERR! System Linux 3.16.0-4-686-pae
gyp ERR! command "nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/iobroker/node_modules/iobroker.admin/node_modules/socket.io/node_modules/engine.io/node_modules/ws/node_modules/bufferutil
gyp ERR! node -v v0.10.29
gyp ERR! node-gyp -v v0.12.2
gyp ERR! not ok
npm WARN optional dep failed, continuing utf-8-validate@1.2.1
npm WARN This failure might be due to the use of legacy binary "node"
npm WARN For further explanations, please read
/usr/share/doc/nodejs/README.Debian

In file included from ../src/validation.cc:15:0:
../node_modules/nan/nan.h:328:47: error: ‘REPLACE_INVALID_UTF8’ is not a member of ‘v8::String’
static const unsigned kReplaceInvalidUtf8 = v8::String::REPLACE_INVALID_UTF8;
^
make: *** [Release/obj.target/validation/src/validation.o] Ошибка 1
gyp ERR! build error
gyp ERR! stack Error: make failed with exit code: 2
gyp ERR! stack at ChildProcess.onExit (/usr/share/node-gyp/lib/build.js:267:23)
gyp ERR! stack at ChildProcess.emit (events.js:98:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:809:12)
gyp ERR! System Linux 3.16.0-4-686-pae
gyp ERR! command "nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/iobroker/node_modules/iobroker.admin/node_modules/socket.io/node_modules/socket.io-client/node_modules/engine.io-client/node_modules/ws/node_modules/utf-8-validate
gyp ERR! node -v v0.10.29
gyp ERR! node-gyp -v v0.12.2
gyp ERR! not ok
npm WARN optional dep failed, continuing bufferutil@1.2.1
npm WARN This failure might be due to the use of legacy binary "node"
npm WARN For further explanations, please read
/usr/share/doc/nodejs/README.Debian

In file included from ../src/bufferutil.cc:16:0:
../node_modules/nan/nan.h:328:47: error: ‘REPLACE_INVALID_UTF8’ is not a member of ‘v8::String’
static const unsigned kReplaceInvalidUtf8 = v8::String::REPLACE_INVALID_UTF8;
^
make: *** [Release/obj.target/bufferutil/src/bufferutil.o] Ошибка 1
gyp ERR! build error
gyp ERR! stack Error: make failed with exit code: 2
gyp ERR! stack at ChildProcess.onExit (/usr/share/node-gyp/lib/build.js:267:23)
gyp ERR! stack at ChildProcess.emit (events.js:98:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:809:12)
gyp ERR! System Linux 3.16.0-4-686-pae
gyp ERR! command "nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/iobroker/node_modules/iobroker.admin/node_modules/socket.io/node_modules/socket.io-client/node_modules/engine.io-client/node_modules/ws/node_modules/bufferutil
gyp ERR! node -v v0.10.29
gyp ERR! node-gyp -v v0.12.2
gyp ERR! not ok
npm WARN optional dep failed, continuing utf-8-validate@1.2.1
npm WARN This failure might be due to the use of legacy binary "node"
npm WARN For further explanations, please read
/usr/share/doc/nodejs/README.Debian

npm WARN optional dep failed, continuing bufferutil@1.2.1
Write "./iobroker start" to start the ioBroker
Auto-start was enabled. Write "update-rc.d -f iobroker.sh remove" to disable auto-start
iobroker is started. Go to "http://ip-addr:8081" to open the admin UI.
iobroker@0.5.6 node_modules/iobroker
└── yargs@1.2.6 (minimist@0.1.0)
root@SmartHome:/opt/iobroker# node -v
v0.10.29

! ````
Копаю дальше, натянул виз, не открывается

Haus

Привет всем

Вчера мучался пол дня с установкой Iobroker на Debian, сначала думал может какие проблемы с 8.2 (кстати nodejs есть в репозитариях) накатил 7.9 та же фигня ошибок и варнингов при установке кучи. Перечитал все способы установки и вуаля.

Debian 8.2 чистый под "root"

apt-get update
apt-get upgrade
apt-get install curl
apt-get install build-essential
curl -sL https://deb.nodesource.com/setup | bash -
apt-get install nodejs
mkdir /opt/iobroker
chmod 777 /opt/iobroker
cd /opt/iobroker
npm install iobroker

Проблемы с nodejs и npm в репозитах они старые и с кодировкой чего то не то если кому пригодится отпешитесь о результатах

Вопрос к Bluefox не приходят обновления драйверов всё остальное как часы?

! root@Server1:~# cd /opt/iobroker
! root@Server1:/opt/iobroker# iobroker update
! update done
! Adapter "zwave" : 0.2.3
! Adapter "yr" : 0.1.9 , installed 0.1.9
! Adapter "wolf" : 0.0.9
! Adapter "web" : 1.2.1 , installed 1.2.1
! Adapter "vis-timeandweather": 0.0.2 , installed 0.0.2
! Adapter "vis-rgraph" : 0.0.2 , installed 0.0.2
! Adapter "vis-plumb" : 0.1.6
! Adapter "vis-metro" : 0.1.9
! Adapter "vis-lcars" : 0.1.6
! Adapter "vis-keyboard" : 0.0.2
! Adapter "vis-jqui-mfd" : 0.1.0
! Adapter "vis-hqwidgets" : 0.2.2 , installed 0.2.2
! Adapter "vis-google-fonts": 0.1.0
! Adapter "vis-fancyswitch": 0.1.0
! Adapter "vis-colorpicker": 0.1.1
! Adapter "vis-bars" : 0.1.1
! Adapter "vis" : 0.7.7 , installed 0.7.7
! Adapter "terminal" : 0.1.2
! Adapter "sonos" : 0.1.7
! Adapter "rickshaw" : 0.2.2 , installed 0.2.2
! Adapter "pushover" : 0.1.1
! Adapter "pushbullet" : 0.0.11
! Adapter "owfs" : 0.0.2 , installed 0.0.2
! Adapter "onkyo" : 0.1.9
! Adapter "socketio" : 1.0.0
! Adapter "simple-api" : 1.0.0
! Adapter "scenes" : 0.2.2
! Adapter "sayit" : 0.3.15 , installed 0.3.15
! Adapter "s7" : 0.2.4
! Adapter "ping" : 0.1.4
! Adapter "node-red" : 0.3.5
! Adapter "mqtt" : 0.2.15
! Adapter "modbus" : 0.3.9
! Adapter "mobile" : 0.0.5
! Adapter "megad" : 1.0.6 , installed 1.0.6
! Adapter "knx" : 0.2.10
! Controller "js-controller" : 0.7.15 , installed 0.7.15
! Adapter "javascript" : 1.0.7 , installed 1.0.7
! Adapter "icons-ultimate-png": 0.1.0
! Adapter "icons-open-icon-library-png": 0.1.1
! Adapter "icons-mfd-svg" : 0.1.2
! Adapter "icons-mfd-png" : 0.1.2
! Adapter "icons-material-svg": 0.1.0
! Adapter "icons-material-png": 0.1.0
! Adapter "icons-addictive-flavour-png": 0.1.0
! Adapter "ical" : 1.1.1 , installed 1.1.1
! Adapter "hmm" : 1.0.0
! Adapter "hue" : 0.5.1
! Adapter "hm-rpc" : 0.5.2
! Adapter "hm-rega" : 0.2.2
! Adapter "history" : 0.1.3 , installed 0.1.3
! Adapter "harmony" : 0.5.4
! Adapter "example" : 0.1.1 , installed 0.1.1
! Adapter "fritzbox" : 0.2.1
! Adapter "flot" : 0.1.1 , installed 0.1.1
! Adapter "email" : 0.1.2
! Adapter "dwd" : 1.0.1
! Adapter "cul" : 0.0.4
! Adapter "b-control-em" : 0.1.1
! Adapter "artnet" : 0.0.3
! Adapter "admin" : 0.6.6 , installed 0.6.6

Haus

~~@Haus:~~

Привет всем

Вчера мучался пол дня с установкой Iobroker на Debian, сначала думал может какие проблемы с 8.2 (кстати nodejs есть в репозитариях) накатил 7.9 та же фигня ошибок и варнингов при установке кучи. Перечитал все способы установки и вуаля.

Debian 8.2 чистый под "root"
apt-get update
apt-get upgrade
apt-get install curl
apt-get install build-essential
curl -sL https://deb.nodesource.com/setup | bash -
apt-get install nodejs
mkdir /opt/iobroker
chmod 777 /opt/iobroker
cd /opt/iobroker
npm install iobroker
Проблемы с nodejs и npm в репозитах они старые и с кодировкой чего то не то если кому пригодится отпешитесь о результатах

Вопрос к Bluefox не приходят обновления драйверов всё остальное как часы?

! root@Server1:~# cd /opt/iobroker
! root@Server1:/opt/iobroker# iobroker update
! update done
! Adapter "zwave" : 0.2.3
! Adapter "yr" : 0.1.9 , installed 0.1.9
! Adapter "wolf" : 0.0.9
! Adapter "web" : 1.2.1 , installed 1.2.1
! Adapter "vis-timeandweather": 0.0.2 , installed 0.0.2
! Adapter "vis-rgraph" : 0.0.2 , installed 0.0.2
! Adapter "vis-plumb" : 0.1.6
! Adapter "vis-metro" : 0.1.9
! Adapter "vis-lcars" : 0.1.6
! Adapter "vis-keyboard" : 0.0.2
! Adapter "vis-jqui-mfd" : 0.1.0
! Adapter "vis-hqwidgets" : 0.2.2 , installed 0.2.2
! Adapter "vis-google-fonts": 0.1.0
! Adapter "vis-fancyswitch": 0.1.0
! Adapter "vis-colorpicker": 0.1.1
! Adapter "vis-bars" : 0.1.1
! Adapter "vis" : 0.7.7 , installed 0.7.7
! Adapter "terminal" : 0.1.2
! Adapter "sonos" : 0.1.7
! Adapter "rickshaw" : 0.2.2 , installed 0.2.2
! Adapter "pushover" : 0.1.1
! Adapter "pushbullet" : 0.0.11
! Adapter "owfs" : 0.0.2 , installed 0.0.2
! Adapter "onkyo" : 0.1.9
! Adapter "socketio" : 1.0.0
! Adapter "simple-api" : 1.0.0
! Adapter "scenes" : 0.2.2
! Adapter "sayit" : 0.3.15 , installed 0.3.15
! Adapter "s7" : 0.2.4
! Adapter "ping" : 0.1.4
! Adapter "node-red" : 0.3.5
! Adapter "mqtt" : 0.2.15
! Adapter "modbus" : 0.3.9
! Adapter "mobile" : 0.0.5
! Adapter "megad" : 1.0.6 , installed 1.0.6
! Adapter "knx" : 0.2.10
! Controller "js-controller" : 0.7.15 , installed 0.7.15
! Adapter "javascript" : 1.0.7 , installed 1.0.7
! Adapter "icons-ultimate-png": 0.1.0
! Adapter "icons-open-icon-library-png": 0.1.1
! Adapter "icons-mfd-svg" : 0.1.2
! Adapter "icons-mfd-png" : 0.1.2
! Adapter "icons-material-svg": 0.1.0
! Adapter "icons-material-png": 0.1.0
! Adapter "icons-addictive-flavour-png": 0.1.0
! Adapter "ical" : 1.1.1 , installed 1.1.1
! Adapter "hmm" : 1.0.0
! Adapter "hue" : 0.5.1
! Adapter "hm-rpc" : 0.5.2
! Adapter "hm-rega" : 0.2.2
! Adapter "history" : 0.1.3 , installed 0.1.3
! Adapter "harmony" : 0.5.4
! Adapter "example" : 0.1.1 , installed 0.1.1
! Adapter "fritzbox" : 0.2.1
! Adapter "flot" : 0.1.1 , installed 0.1.1
! Adapter "email" : 0.1.2
! Adapter "dwd" : 1.0.1
! Adapter "cul" : 0.0.4
! Adapter "b-control-em" : 0.1.1
! Adapter "artnet" : 0.0.3
! Adapter "admin" : 0.6.6 , installed 0.6.6 `

Сам себе и отвечу

Нет обновлений.

На гите рабочие версии, которые ни в коем случае нельзя устанавливать, если не знаешь javascript.

Процесс разработки следующий. Я сначала заливаю версию на гит (она может быть и не рабочей). Потом прошу пользователей, кто не боится трудностей и способен определить проблемы установить эти версии специальной командой.

Если у них бежит, то я заливаю версию на npm и вот оттуда она доступна всем.

Почему у тебя показываются версии с гита надо ещё выяснить.

Рабочую версию, кстати, можно посмотреть здесь http://iobroker.net:8081 и http://iobroker.net:8082/vis/edit.html

electric69

Пытаюсь установить iobroker на bananapi образ http://www.armbian.com/banana-pi/.

NodeJS и NPM https://github.com/nodejs/node-v0.x-archive/wiki/Installing-Node.js-via-package-manager#debian-and-ubuntu-based-linux-distributions без проблем:

root@bananapi:/# nodejs -v
v5.1.1
root@bananapi:/# npm -v
3.3.12
root@bananapi:/#

Затем:

$ cd /opt
$ mkdir iobroker
$ cd iobroker
$ sudo npm install iobroker

Ошибка:
50_pic_32.jpg

Bluefox

sudo npm install iobroker

electric69

~~@Bluefox:~~

sudo npm install iobroker `
Тоже самое.

Даже пробовал:

root@bananapi:/opt/iobroker# ln -s /usr/bin/nodejs /usr/bin/node
ln: failed to create symbolic link ‘/usr/bin/node’: File exists
root@bananapi:/opt/iobroker#

Говорит ссылка уже есть…

Я так понимаю, что нет прав на запись?

Хотя директорию node_modules и вложенные в нее создает...
50_pic_33.jpg
50_pic_34.jpg

Bluefox

А если

sudo npm install iobroker --unsafe-perm

?

electric69

~~@Bluefox:~~

А если

sudo npm install iobroker --unsafe-perm

```` `

Вроде прокатило))

Устанавливаю драйвера…
50_pic_35.jpg
7614_screenshot_2018-10-18_21.29.09.png

DAndre

Здравствуйте.

CouchDB и Redis ставить?

Bluefox

Нет.

Но можешь поставить influxdb, если знаешь как.

NEWS

Инсталляция под Linux

Support us

407
Online

31.8k
Users

80.0k
Topics

1.3m
Posts

NEWS

Инсталляция под Linux

Support us

407Online

31.8kUsers

80.0kTopics

1.3mPosts

407
Online

31.8k
Users

80.0k
Topics

1.3m
Posts