Viessmann Adapter keine Verbindung mehr
-
-
Habe es mir durchgelesen, bei mir sieht es aber irgendwie anders aus, mein Adapter wird schon garnicht grün und sagt keine Verbindung zum Gerät. Ich habe noch die Version v2.3.0 drauf, sollte ich mir die neuere von Github runterladen und versuchen?
-
@jan_xx sagte in Viessmann Adapter keine Verbindung mehr:
von Github
Nein, von GitHub lässt du die Finger. Allenfalls mal die Beta-Version versuchen.
Und dann bräuchte man da mehr Infos zum System.iob diagzeigt dir das.
Und aus dem Logfile auch.
Schau iniob lobsdanach.
-
@thomas-braun
ich sehe die neue Version unter beta, kann aber nicht updates da folgender Fehler erscheint$ iobroker upgrade viessmannapi@2.4.0 --debug Update viessmannapi from @2.3.0 to @2.4.0 Installing iobroker.viessmannapi@2.4.0... (System call) npm error A complete log of this run can be found in: /home/iobroker/.npm/_logs/2025-10-04T14_19_10_769Z-debug-0.log Try to solve ENOTEMPTY error automatically Could not handle ENOTEMPTY, because no deletable files were foundnpm error code ENOTEMPTYnpm error syscall renamenpm error path /opt/iobroker/node_modules/socketcannpm error dest /opt/iobroker/node_modules/.socketcan-kzN4JrCynpm error errno -39npm error ENOTEMPTY: directory not empty, rename '/opt/iobroker/node_modules/socketcan' -> '/opt/iobroker/node_modules/.socketcan-kzN4JrCy'npm error A complete log of this run can be found in: /home/iobroker/.npm/_logs/2025-10-04T14_19_10_769Z-debug-0.loghost.iobroker12 Cannot install iobroker.viessmannapi@2.4.0: 217 ERROR: Process exited with code 25js.controller lässt sich auch nicht updates
NPM version: 10.8.2 Installing iobroker.js-controller@7.0.7... (System call) Try to solve ENOTEMPTY error automatically Could not handle ENOTEMPTY, because no deletable files were found npm error code ENOTEMPTY npm error syscall rename npm error path /opt/iobroker/node_modules/socketcan npm error dest /opt/iobroker/node_modules/.socketcan-kzN4JrCy npm error errno -39 npm error ENOTEMPTY: directory not empty, rename '/opt/iobroker/node_modules/socketcan' -> '/opt/iobroker/node_modules/.socketcan-kzN4JrCy' npm error A complete log of this run can be found in: /home/iobroker/.npm/_logs/2025-10-04T14_12_46_184Z-debug-0.log host.iobroker12 Cannot install iobroker.js-controller@7.0.7: 217 -
-
@thomas-braun
da kommt ein häufen zeug, soll ich das alles posten? da steht auch einiges über IP Adressen usw??? -
Ja, alles natürlich. Und warum sollten IP-Adressen kritisch sein? Die werden aus deinem privaten Netz ohnehin nicht geroutet.
-
@thomas-braun
hoffentlich siehst du hier was...Script v.2025-08-09 *** BASE SYSTEM *** Operating System: Debian GNU/Linux 12 (bookworm) Static hostname: iobroker12 Icon name: computer-container Chassis: container ☐ Virtualization: lxc Kernel: Linux 6.8.12-4-pve Architecture: x86-64 OS is similar to: model name : Intel(R) N100 Docker : false Virtualization : lxc Kernel : x86_64 Userland : 64 bit Systemuptime and Load: 16:24:14 up 179 days, 19:50, 2 users, load average: 0.30, 0.77, 1.07 CPU threads: 2 *** LIFE CYCLE STATUS *** Debian 'bookworm' is the current oldstable version. Please upgrade to the latest stable release 'trixie' in due time! *** TIME AND TIMEZONES *** Local time: Sat 2025-10-04 16:24:14 CEST Universal time: Sat 2025-10-04 14:24:14 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: inactive RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': home HOME=/home/home GROUPS=home adm dialout sudo audio video plugdev users iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev *** DISPLAY-SERVER SETUP *** Display-Server: false Unit display-manager.service could not be found. Display-Manager: Desktop: Session: *** MEMORY *** total used free shared buff/cache available Mem: 6.3G 3.2G 1.3G 86K 1.8G 3.1G Swap: 536M 5.1M 531M Total: 6.8G 3.2G 1.9G Active iob-Instances: 41 6000 M total memory 3054 M used memory 2981 M active memory 1499 M inactive memory 1257 M free memory 0 M buffer memory 1688 M swap cache 512 M total swap 4 M used swap 507 M free swap *** top - Table Of Processes *** top - 16:24:14 up 179 days, 19:50, 2 users, load average: 0.30, 0.77, 1.07 Tasks: 67 total, 1 running, 66 sleeping, 0 stopped, 0 zombie %Cpu(s): 0.0 us, 0.0 sy, 0.0 ni,100.0 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 6000.0 total, 1255.7 free, 3055.8 used, 1688.7 buff/cache MiB Swap: 512.0 total, 507.1 free, 4.9 used. 2944.2 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * run-rpc_pipefs.mount loaded failed failed RPC Pipe File System LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 1 loaded units listed. *** DMESG CRITICAL ERRORS *** dmesg: read kernel buffer failed: Operation not permitted No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/mapper/pve-vm--101--disk--0 ext4 20G 18G 1.3G 94% / none tmpfs 492K 4.0K 488K 1% /dev none tmpfs 8.0K 4.0K 4.0K 50% /dev/serial/by-id/usb-VictronEnergy_BV_VE_Direct_cable_VE6FVWYH-if00-port0 udev devtmpfs 7.7G 0 7.7G 0% /dev/tty tmpfs tmpfs 7.8G 0 7.8G 0% /dev/shm tmpfs tmpfs 3.1G 108K 3.1G 1% /run tmpfs tmpfs 5.0M 0 5.0M 0% /run/lock Messages concerning ext4 filesystem in dmesg: dmesg: read kernel buffer failed: Operation not permitted Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mapper/pve-vm--101--disk--0 ext4 rw,relatime,stripe=16 Files in neuralgic directories: /var: 917M /var/ 412M /var/cache 408M /var/cache/apt 357M /var/log 350M /var/log/journal/0d9c3c73282f449ebe5d5ab3622eb7de Archived and active journals take up 349.1M in the file system. /opt/iobroker/backups: 11G /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 959M /opt/iobroker/iobroker-data/ 346M /opt/iobroker/iobroker-data/files 241M /opt/iobroker/iobroker-data/backup-objects 198M /opt/iobroker/iobroker-data/sqlite 58M /opt/iobroker/iobroker-data/files/vis-2 The five largest files in iobroker-data are: 198M /opt/iobroker/iobroker-data/sqlite/sqlite.db 68M /opt/iobroker/iobroker-data/objects.jsonl 57M /opt/iobroker/iobroker-data/states.jsonl 24M /opt/iobroker/iobroker-data/files/modbus.admin/static/js/main.6a71b34c.js.map 9.8M /opt/iobroker/iobroker-data/files/vis-2/material-icons/knx-uf.json USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-VictronEnergy_BV_VE_Direct_cable_VE6FVWYH-if00-port0 Zigbee Network Settings on your coordinator/in nvbackup are: zigbee.X Extended Pan ID: *** MASKED *** Pan ID: *** MASKED *** Channel: *** MASKED *** Network Key: *** MASKED *** To unmask the settings run 'iob diag --unmask' *** NodeJS-Installation *** /usr/bin/nodejs v20.19.5 /usr/bin/node v20.19.5 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 /usr/bin/corepack 0.33.0 nodejs: Installed: 20.19.5-1nodesource1 Candidate: 20.19.5-1nodesource1 Version table: *** 20.19.5-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 100 /var/lib/dpkg/status 20.19.4-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.19.3-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.19.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.19.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.18.3-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.12.2-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.12.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.11.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.8.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.6.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.3.1-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 20.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages 18.20.4+dfsg-1~deb12u1 500 500 http://deb.debian.org/debian bookworm/main amd64 Packages 500 http://security.debian.org bookworm-security/main amd64 Packages Temp directories causing deletion problem: 5 Some problems detected, please run iob fix Errors in npm tree: 0 No problems detected Checking for nodejs vulnerability: █████ ██ ██ ██████ ██████ ██████ ██████ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ██ ██ ██ ███ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ███████ ██████ ██████ ██████ ██████ ██ *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Hosts: iobroker12 iobroker12 (version: 7.0.6, hostname: iobroker12 , alive, uptime: 678) Core adapters versions js-controller: 7.0.6 admin: 7.7.2 javascript: 8.9.2 nodejs modules from github: 4 +-- iobroker.sourceanalytix@0.4.14 (git+ssh://git@github.com/DrozmotiX/ioBroker.sourceanalytix.git#b9a3db457ac1a6e1ef4b7ab6edcfddc0388e4b19) +-- iobroker.vedirect@0.3.3 (git+ssh://git@github.com/DrozmotiX/ioBroker.vedirect.git#8435302add9dc410535180c6c0d5ebbaef2eeb1e) +-- iobroker.vis-justgage@2.1.7 (git+ssh://git@github.com/iobroker-community-adapters/ioBroker.vis-justgage.git#49591edc773788480695d48f60865fcc47c59e2d) +-- iobroker.vis-materialdesign@0.5.94 (git+ssh://git@github.com/Scrounger/ioBroker.vis-materialdesign.git#8b7529d493f223dfc4f1d1f632553fcb35bbcc92) Adapter State + system.adapter.admin.0 : admin : iobroker12 - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.backitup.1 : backitup : iobroker12 - enabled + system.adapter.device-reminder.0 : device-reminder : iobroker12 - enabled system.adapter.deyeidc.0 : deyeidc : iobroker12 - disabled, port: 8899 system.adapter.deyeidc.1 : deyeidc : iobroker12 - disabled, port: 8899 + system.adapter.discovery.0 : discovery : iobroker12 - enabled system.adapter.e3oncan.0 : e3oncan : iobroker12 - enabled + system.adapter.enigma2.0 : enigma2 : iobroker12 - enabled + system.adapter.enigma2.1 : enigma2 : iobroker12 - enabled system.adapter.flot.0 : flot : iobroker12 - disabled + system.adapter.froeling.0 : froeling : iobroker12 - enabled + system.adapter.fullybrowser.0 : fullybrowser : iobroker12 - enabled + system.adapter.history.0 : history : iobroker12 - enabled + system.adapter.hm-rega.0 : hm-rega : iobroker12 - enabled + system.adapter.hm-rpc.0 : hm-rpc : iobroker12 - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : iobroker12 - enabled, port: 0 + system.adapter.hm-rpc.2 : hm-rpc : iobroker12 - enabled, port: 0 + system.adapter.hm-rpc.3 : hm-rpc : iobroker12 - enabled, port: 0 + system.adapter.hue.0 : hue : iobroker12 - enabled, port: 443 system.adapter.icons-mfd-svg.0 : icons-mfd-svg : iobroker12 - disabled system.adapter.icons-ultimate-png.0 : icons-ultimate-png : iobroker12 - disabled + system.adapter.javascript.0 : javascript : iobroker12 - enabled system.adapter.linux-control.0 : linux-control : iobroker12 - disabled system.adapter.mihome-vacuum.0 : mihome-vacuum : iobroker12 - disabled, port: 54321 system.adapter.modbus.0 : modbus : iobroker12 - disabled system.adapter.mqtt-client.0 : mqtt-client : iobroker12 - disabled, port: 1883 system.adapter.mqtt-client.1 : mqtt-client : iobroker12 - disabled, port: 1883 + system.adapter.mqtt.1 : mqtt : iobroker12 - enabled, port: 1883, bind: 192.168.122.49 system.adapter.mqtt.2 : mqtt : iobroker12 - disabled, port: 1882, bind: :: system.adapter.mqtt.3 : mqtt : iobroker12 - disabled, port: 1883, bind: 192.168.122.49 system.adapter.mywallbox.0 : mywallbox : iobroker12 - disabled + system.adapter.node-red.0 : node-red : iobroker12 - enabled, port: 1880, bind: 0.0.0.0 + system.adapter.nuki-extended.0 : nuki-extended : iobroker12 - enabled + system.adapter.nut.0 : nut : iobroker12 - enabled + system.adapter.operating-hours.0 : operating-hours : iobroker12 - enabled + system.adapter.philips-tv.0 : philips-tv : iobroker12 - enabled + system.adapter.pid.0 : pid : iobroker12 - enabled + system.adapter.ping.0 : ping : iobroker12 - enabled system.adapter.ping.1 : ping : iobroker12 - disabled + system.adapter.proxmox.0 : proxmox : iobroker12 - enabled + system.adapter.roborock.0 : roborock : iobroker12 - enabled + system.adapter.shelly.0 : shelly : iobroker12 - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : iobroker12 - enabled, port: 1882, bind: 192.168.122.49 system.adapter.shelly.2 : shelly : iobroker12 - disabled, port: 1883, bind: 192.168.122.49 system.adapter.shelly.3 : shelly : iobroker12 - disabled, port: 1882, bind: 0.0.0.0 system.adapter.shelly.4 : shelly : iobroker12 - disabled, port: 1882, bind: 0.0.0.0 + system.adapter.solarmanpv.0 : solarmanpv : iobroker12 - enabled + system.adapter.sourceanalytix.0 : sourceanalytix : iobroker12 - enabled + system.adapter.sql.0 : sql : iobroker12 - enabled + system.adapter.sql.1 : sql : iobroker12 - enabled + system.adapter.statistics.0 : statistics : iobroker12 - enabled + system.adapter.telegram.0 : telegram : iobroker12 - enabled, port: 8443, bind: 0.0.0.0 system.adapter.tuya.0 : tuya : iobroker12 - disabled + system.adapter.vedirect.0 : vedirect : iobroker12 - enabled system.adapter.viessmannapi.0 : viessmannapi : iobroker12 - disabled system.adapter.viessmannapi.1 : viessmannapi : iobroker12 - disabled + system.adapter.viessmannapi.2 : viessmannapi : iobroker12 - enabled + system.adapter.vis-2.0 : vis-2 : iobroker12 - enabled system.adapter.vis-icontwo.0 : vis-icontwo : iobroker12 - disabled + system.adapter.vis-inventwo.0 : vis-inventwo : iobroker12 - enabled system.adapter.vis-materialdesign.0 : vis-materialdesign : iobroker12 - disabled system.adapter.vis-timeandweather.0 : vis-timeandweather : iobroker12 - disabled system.adapter.vis.0 : vis : iobroker12 - enabled + system.adapter.web.0 : web : iobroker12 - enabled, port: 8082, bind: 0.0.0.0, run as: admin system.adapter.whatsapp-cmb.0 : whatsapp-cmb : iobroker12 - disabled system.adapter.yahka.0 : yahka : iobroker12 - disabled + system.adapter.zendure-solarflow.0 : zendure-solarflow : iobroker12 - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : iobroker12 - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.hm-rpc.0 : hm-rpc : iobroker12 - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : iobroker12 - enabled, port: 0 + system.adapter.hm-rpc.2 : hm-rpc : iobroker12 - enabled, port: 0 + system.adapter.hm-rpc.3 : hm-rpc : iobroker12 - enabled, port: 0 + system.adapter.hue.0 : hue : iobroker12 - enabled, port: 443 + system.adapter.mqtt.1 : mqtt : iobroker12 - enabled, port: 1883, bind: 192.168.122.49 + system.adapter.node-red.0 : node-red : iobroker12 - enabled, port: 1880, bind: 0.0.0.0 + system.adapter.shelly.0 : shelly : iobroker12 - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : iobroker12 - enabled, port: 1882, bind: 192.168.122.49 + system.adapter.telegram.0 : telegram : iobroker12 - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : iobroker12 - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): beta Upgrade policy: none Installed ioBroker-Adapters Used repository: beta Adapter "admin" : 7.7.3 , installed 7.7.2 [Updatable] Adapter "backitup" : 3.3.7 , installed 3.3.5 [Updatable] Adapter "device-reminder": 3.1.2 , installed 3.1.2 Adapter "deyeidc" : 0.3.1 , installed 0.3.0 [Updatable] Adapter "discovery" : 5.0.0 , installed 5.0.0 Adapter "e3oncan" : 0.10.13 , installed 0.10.12 [Updatable] Adapter "enigma2" : 2.2.3 , installed 2.2.3 Adapter "flot" : 1.12.0 , installed 1.12.0 Adapter "froeling" : 0.0.9 , installed 0.0.8 [Updatable] Adapter "fullybrowser" : 3.1.2 , installed 3.1.2 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "hm-rega" : 5.1.0 , installed 5.1.0 Adapter "hm-rpc" : 2.0.2 , installed 2.0.2 Adapter "hue" : 3.16.2 , installed 3.16.2 Adapter "icons-mfd-svg": 1.2.0 , installed 1.2.0 Adapter "icons-ultimate-png": 1.0.1, installed 1.0.1 Adapter "javascript" : 9.0.11 , installed 8.9.2 [Updatable] Controller "js-controller": 7.0.7 , installed 7.0.6 [Updatable] Adapter "linux-control": 1.1.5 , installed 1.1.5 Adapter "mihome-vacuum": 5.3.0 , installed 5.2.0 [Updatable] Adapter "modbus" : 6.4.0 , installed 6.3.2 [Updatable] Adapter "mqtt" : 6.1.4 , installed 6.1.4 Adapter "mqtt-client" : 3.0.0 , installed 3.0.0 Adapter "mywallbox" : 1.3.0 , installed 1.3.0 Adapter "node-red" : 6.0.7 , installed 5.2.1 [Updatable] Adapter "nuki-extended": 2.7.0 , installed 2.7.0 Adapter "nut" : 1.7.0 , installed 1.6.0 [Updatable] Adapter "operating-hours": 1.3.0 , installed 1.3.0 Adapter "philips-tv" : 0.5.4 , installed 0.5.4 Adapter "pid" : 1.1.3 , installed 1.1.3 Adapter "ping" : 1.7.9 , installed 1.6.2 [Updatable] Adapter "proxmox" : 2.4.0 , installed 2.4.0 Adapter "roborock" : 0.6.19 , installed 0.6.18 [Updatable] Adapter "shelly" : 10.2.0 , installed 10.2.0 Adapter "socketio" : 7.0.8 , installed 7.0.8 Adapter "solarmanpv" : 0.7.2 , installed 0.7.1 [Updatable] Adapter "sourceanalytix": 0.4.14 , installed 0.4.14 Adapter "sql" : 3.0.1 , installed 3.0.1 Adapter "statistics" : 4.0.0 , installed 2.4.0 [Updatable] Adapter "telegram" : 4.1.0 , installed 4.1.0 Adapter "tuya" : 3.17.0 , installed 3.16.0 [Updatable] Adapter "vedirect" : 0.3.0 , installed 0.3.3 Adapter "viessmannapi" : 2.4.3 , installed 2.3.0 [Updatable] Adapter "vis" : 1.5.6 , installed 1.5.6 Adapter "vis-2" : 2.13.5 , installed 2.13.4 [Updatable] Adapter "vis-icontwo" : 1.18.0 , installed 1.18.0 Adapter "vis-inventwo" : 3.3.5 , installed 3.3.5 Adapter "vis-justgage" : 2.1.7 , installed 2.1.7 Adapter "vis-materialdesign": 0.5.9, installed 0.5.94 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "web" : 7.0.9 , installed 7.0.8 [Updatable] Adapter "whatsapp-cmb" : 0.3.0 , installed 0.3.0 Adapter "ws" : 3.0.19 , installed 3.0.19 Adapter "yahka" : 1.1.5 , installed 1.1.5 Adapter "zendure-solarflow": 3.0.1, installed 2.0.1 [Updatable] Objects and States Please stand by - This may take a while Objects: 36709 States: 35474 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian bookworm InRelease Hit:2 http://security.debian.org bookworm-security InRelease Hit:3 http://deb.debian.org/debian bookworm-updates InRelease Hit:4 https://deb.nodesource.com/node_20.x nodistro InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 192.168.122.49:2010 0.0.0.0:* LISTEN 1000 1043455306 679931/io.hm-rpc.2 tcp 0 0 192.168.122.49:2000 0.0.0.0:* LISTEN 1000 1043455247 679915/io.hm-rpc.1 tcp 0 0 192.168.122.49:2001 0.0.0.0:* LISTEN 1000 1043455193 679900/io.hm-rpc.0 tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN 0 138722 316/master tcp 0 0 192.168.122.49:1882 0.0.0.0:* LISTEN 1000 1043455850 680092/io.shelly.1 tcp 0 0 192.168.122.49:1883 0.0.0.0:* LISTEN 1000 1043455405 679981/io.mqtt.1 tcp 0 0 192.168.122.49:1884 0.0.0.0:* LISTEN 1000 1043455406 679981/io.mqtt.1 tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 0 136526 1/systemd tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1000 1043449492 679561/iobroker.js- tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1000 1043450251 679561/iobroker.js- tcp 0 0 0.0.0.0:1880 0.0.0.0:* LISTEN 1000 1043449834 679678/node-red tcp 0 0 192.168.122.49:8701 0.0.0.0:* LISTEN 1000 1043453578 679951/io.hm-rpc.3 tcp6 0 0 :::6824 :::* LISTEN 1000 1043455261 679701/io.roborock. tcp6 0 0 :::7906 :::* LISTEN 1000 1043455262 679701/io.roborock. tcp6 0 0 :::8081 :::* LISTEN 1000 1043449603 679582/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1000 1043463614 680392/io.web.0 tcp6 0 0 :::111 :::* LISTEN 0 136528 1/systemd tcp6 0 0 :::22 :::* LISTEN 0 138424 678594/sshd: /usr/s tcp6 0 0 ::1:25 :::* LISTEN 0 138723 316/master tcp6 0 0 :::8554 :::* LISTEN 1000 1043453529 679930/go2rtc tcp6 0 0 :::8555 :::* LISTEN 1000 1043453530 679930/go2rtc tcp6 0 0 :::1984 :::* LISTEN 1000 1043453531 679930/go2rtc udp 0 0 0.0.0.0:111 0.0.0.0:* 0 136527 1/systemd udp 0 0 0.0.0.0:58111 0.0.0.0:* 1000 1043510510 680060/io.shelly.0 udp 0 0 0.0.0.0:5683 0.0.0.0:* 1000 1043458128 680060/io.shelly.0 udp6 0 0 :::111 :::* 0 136529 1/systemd *** Log File - Last 25 Lines *** 2025-10-04 16:24:47.871 - debug: sourceanalytix.0 (680268) [calculationHandler] reading value 1223.5427056176427 before exponent multiplier 2025-10-04 16:24:47.871 - debug: sourceanalytix.0 (680268) [calculationHandler] reading value 1223.5427056176427 after exponent multiplier : 3 2025-10-04 16:24:47.871 - debug: sourceanalytix.0 (680268) [calculationHandler] New reading 1223.5427056176427 bigger than stored value null processing normally 2025-10-04 16:24:47.871 - debug: sourceanalytix.0 (680268) [calculationHandler] Adding 1223.5427056176427 to stored value 0 2025-10-04 16:24:47.871 - debug: sourceanalytix.0 (680268) [calculationHandler] Calculation outcome 1223.5427056176427 valueAtDeviceReset 0 2025-10-04 16:24:47.871 - debug: sourceanalytix.0 (680268) [calculationHandler] 0_userdata.0.PV_Anlage.Eingespeist-zählerstand set cumulated value 1223.5427056176427 2025-10-04 16:24:47.871 - debug: sourceanalytix.0 (680268) [calculationHandler] ActiveStatesArray {"stateDetails":{"alias":"eingespeist-zählerstand","consumption":true,"deviceName":"0_userdata__0__PV_Anlage__Eingespeist-zählerstand","financialCategory":"costs","headCategory":"consumed","name":"eingespeist-zählerstand","stateType":"ElectricityDay","stateUnit":"kWh","useUnit":"kWh","deviceResetLogicEnabled":true,"threshold":1},"calcValues":{"cumulativeValue":1223.5427056176427,"start_day":1223.5273442320872,"start_month":1217.2443297570417,"start_quarter":1217.2443297570417,"start_week":1213.6914379814775,"start_year":655.4854949849494,"valueAtDeviceReset":0,"valueAtDeviceInit":null},"prices":{"basicPrice":"15","unitPrice":"0.30"}}) 2025-10-04 16:24:47.885 - debug: sourceanalytix.0 (680268) [calculationHandler] PreviousCalculationRounded for 0_userdata.0.PV_Anlage.Eingespeist-zählerstand : {"consumedDay":0.015,"consumedWeek":9.851,"consumedMonth":6.298,"consumedQuarter":6.298,"consumedYear":568.057,"priceDay":0.00460841566664385,"priceWeek":2.96,"priceMonth":1.89,"priceQuarter":1.89,"priceYear":170.42} 2025-10-04 16:24:47.886 - debug: sourceanalytix.0 (680268) [calculationHandler] Result of calculation: {"consumedDay":0.015361385555479501,"consumedWeek":9.851267636165176,"consumedMonth":6.298375860601027,"consumedQuarter":6.298375860601027,"consumedYear":568.0572106326933,"priceDay":0.00460841566664385,"priceWeek":2.955380290849553,"priceMonth":1.889512758180308,"priceQuarter":1.889512758180308,"priceYear":170.417163189808} 2025-10-04 16:24:47.886 - debug: sourceanalytix.0 (680268) roundDigits with 0.015361385555479501 rounded 0.015 2025-10-04 16:24:47.886 - debug: sourceanalytix.0 (680268) roundDigits with 9.851267636165176 rounded 9.851 2025-10-04 16:24:47.886 - debug: sourceanalytix.0 (680268) roundDigits with 6.298375860601027 rounded 6.298 2025-10-04 16:24:47.886 - debug: sourceanalytix.0 (680268) roundDigits with 6.298375860601027 rounded 6.298 2025-10-04 16:24:47.886 - debug: sourceanalytix.0 (680268) roundDigits with 568.0572106326933 rounded 568.057 2025-10-04 16:24:47.886 - debug: sourceanalytix.0 (680268) roundCosts with 0.00460841566664385 rounded 0 2025-10-04 16:24:47.886 - debug: sourceanalytix.0 (680268) roundCosts with 2.955380290849553 rounded 2.96 2025-10-04 16:24:47.886 - debug: sourceanalytix.0 (680268) roundCosts with 1.889512758180308 rounded 1.89 2025-10-04 16:24:47.886 - debug: sourceanalytix.0 (680268) roundCosts with 1.889512758180308 rounded 1.89 2025-10-04 16:24:47.886 - debug: sourceanalytix.0 (680268) roundCosts with 170.417163189808 rounded 170.42 2025-10-04 16:24:47.886 - debug: sourceanalytix.0 (680268) [calculationHandler] Result of rounding: {"consumedDay":0.015361385555479501,"consumedWeek":9.851267636165176,"consumedMonth":6.298375860601027,"consumedQuarter":6.298375860601027,"consumedYear":568.0572106326933,"priceDay":0.00460841566664385,"priceWeek":2.955380290849553,"priceMonth":1.889512758180308,"priceQuarter":1.889512758180308,"priceYear":170.417163189808} 2025-10-04 16:24:47.911 - warn: fullybrowser.0 (679870) [REST] Amazon_Tablet_Stube IP 192.168.122.67: Sending command get axiosGetDevicesInfo failed: No response. Device is Offline or not reachable. 2025-10-04 16:24:47.934 - debug: sourceanalytix.0 (680268) [calculationHandler] Meter Calculation executed consumed data for 0_userdata.0.PV_Anlage.Eingespeist-zählerstand : {"consumedDay":0.015,"consumedWeek":9.851,"consumedMonth":6.298,"consumedQuarter":6.298,"consumedYear":568.057,"priceDay":0.00460841566664385,"priceWeek":2.96,"priceMonth":1.89,"priceQuarter":1.89,"priceYear":170.42} 2025-10-04 16:24:48.352 - info: javascript.0 (679627) script.js.Heizung.Heizpatrone_Puffer_mit_PV_P_2025: 0P Patrone soll 2025-10-04 16:24:48.696 - info: shelly.0 (680060) [authEnabled] 192.168.122.58 (shellyuni / shellyuni-C45BBE6C608E / SHUNI-1#C45BBE6C608E#1): This device is not protected via restricted login (see adapter documentation for details) 2025-10-04 16:24:48.776 - info: shelly.0 (680060) [authEnabled] 192.168.122.51 (shelly1 / shelly1-E09806A99C3C / SHSW-1#E09806A99C3C#1): This device is not protected via restricted login (see adapter documentation for details) -
iob nodejs-update iob stop iob fix iob start -
Alles schick alles grün und die Daten kommen auch wieder!
Vielen vielen Dank für den schnellen Support!Kannst die Rechnung schicken...
Grüße
-
@thomas-braun ich habe das selbe Problem, leider hat da deine Lösung nichts gebracht und ich habe immer noch keine Verbindung. Hast du noch weitere tips?
-
@hugi sagte in Viessmann Adapter keine Verbindung mehr:
Hast du noch weitere tips?
Ja, Glaskugel hat gerade Urlaub. Wo sind die Informationen anhand derer man (versuchen kann) mögliche Fehler zu erkennen. Angefangen mit einem obligatorischen
iob diag -
@hugi sagte in Viessmann Adapter keine Verbindung mehr:
leider hat da deine Lösung nichts gebracht
Das war keine 'Lösung' für das Problem, das war nur die Hilfestellung um das System auf einem aktuellen Stand zu haben.
(Was aber wiederum die Ausgangsbasis für eine Problemsuche oder -lösung ist) -
@thomas-braun @Samson71
Ich habe den iob diag ausgeführt und die Fehlermeldung aus dem Log rauskopiert. Ich hoffe das hilft beim Blick in die Glaskugel.
{"error":"invalid_request","error_description":"Invalid request: Missing or empty code parameter"} AxiosError: Request failed with status code 400========== Start marking the full check here =========== ```bash Script v.2025-08-09 *** BASE SYSTEM *** Operating System: Debian GNU/Linux 12 (bookworm) Static hostname: raspberrypi Icon name: computer Kernel: Linux 6.6.51+rpt-rpi-2712 Architecture: arm64 OS is similar to: Model : Raspberry Pi 5 Model B Rev 1.0 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 10:45:47 up 18:27, 3 users, load average: 0.29, 0.16, 0.11 CPU threads: 4 *** LIFE CYCLE STATUS *** Debian 'bookworm' is the current oldstable version. Please upgrade to the latest stable release 'trixie' in due time! *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** TIME AND TIMEZONES *** Local time: Mon 2025-10-06 10:45:47 CEST Universal time: Mon 2025-10-06 08:45:47 UTC RTC time: Mon 2025-10-06 08:45:47 Time zone: Europe/Zurich (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': pi HOME=/home/pi GROUPS=pi adm dialout cdrom sudo audio video plugdev games users input render netdev lpadmin gpio i2c spi iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** DISPLAY-SERVER SETUP *** Display-Server: false Display-Manager: x lightdm.service - Light Display Manager Desktop: Session: tty System is booting into 'graphical.target'. Usually a server is running in 'multi-user.target'. Please set BootTarget to 'multi-user.target' or run 'iobroker fix' *** MEMORY *** total used free shared buff/cache available Mem: 8.4G 2.5G 4.3G 5.9M 1.7G 5.9G Swap: 209M 0B 209M Total: 8.7G 2.5G 4.5G Active iob-Instances: 19 8052 M total memory 2424 M used memory 2254 M active memory 1252 M inactive memory 4101 M free memory 283 M buffer memory 1344 M swap cache 199 M total swap 0 M used swap 199 M free swap *** top - Table Of Processes *** top - 10:45:47 up 18:27, 3 users, load average: 0.29, 0.16, 0.11 Tasks: 207 total, 2 running, 205 sleeping, 0 stopped, 0 zombie %Cpu(s): 0.0 us, 0.0 sy, 0.0 ni,100.0 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 8052.3 total, 4101.2 free, 2424.8 used, 1628.8 buff/cache MiB Swap: 200.0 total, 200.0 free, 0.0 used. 5627.6 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * lightdm.service loaded failed failed Light Display Manager LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 1 loaded units listed. *** DMESG CRITICAL ERRORS *** No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 3.8G 0 3.8G 0% /dev tmpfs tmpfs 1.6G 5.4M 1.6G 1% /run /dev/mmcblk0p2 ext4 29G 11G 17G 39% / tmpfs tmpfs 4.0G 0 4.0G 0% /dev/shm tmpfs tmpfs 5.0M 48K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 510M 78M 433M 16% /boot/firmware tmpfs tmpfs 806M 144K 806M 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Sun Oct 5 16:18:35 2025] Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe smsc95xx.macaddr=2C:CF:67:1F:04:A3 vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 console=ttyAMA10,115200 console=tty1 root=PARTUUID=3f5521b5-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [Sun Oct 5 16:18:35 2025] EXT4-fs (mmcblk0p2): mounted filesystem cb6f0e18-5add-4177-ab98-e9f0235e06b3 ro with ordered data mode. Quota mode: none. [Sun Oct 5 16:18:36 2025] EXT4-fs (mmcblk0p2): re-mounted cb6f0e18-5add-4177-ab98-e9f0235e06b3 r/w. Quota mode: none. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime `-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 3.2G /var/ 2.1G /var/cache/apt 2.1G /var/cache 2.0G /var/cache/apt/archives 648M /var/log Archived and active journals take up 646.7M in the file system. /opt/iobroker/backups: 37M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 339M /opt/iobroker/iobroker-data/ 131M /opt/iobroker/iobroker-data/files 94M /opt/iobroker/iobroker-data/backup-objects 47M /opt/iobroker/iobroker-data/files/admin.admin 46M /opt/iobroker/iobroker-data/files/admin.admin/custom/assets The five largest files in iobroker-data are: 58M /opt/iobroker/iobroker-data/objects.jsonl 56M /opt/iobroker/iobroker-data/states.jsonl 8.6M /opt/iobroker/iobroker-data/files/backitup.admin/assets/index-BBu8-Y_o.js 4.6M /opt/iobroker/iobroker-data/files/javascript.admin/vs/language/typescript/tsWorker.js 4.4M /opt/iobroker/iobroker-data/files/yahka.admin/yahka.admin.js.map USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' Zigbee Network Settings on your coordinator/in nvbackup are: zigbee.X Extended Pan ID: *** MASKED *** Pan ID: *** MASKED *** Channel: *** MASKED *** Network Key: *** MASKED *** To unmask the settings run 'iob diag --unmask' *** NodeJS-Installation *** /usr/bin/nodejs v22.20.0 /usr/bin/node v22.20.0 /usr/bin/npm 10.9.3 /usr/bin/npx 10.9.3 /usr/bin/corepack 0.34.0 nodejs: Installed: 22.20.0-1nodesource1 Candidate: 22.20.0-1nodesource1 Version table: *** 22.20.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 22.19.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.18.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.17.1-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.17.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.16.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.15.1-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.15.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.14.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.13.1-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.13.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.12.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.11.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.10.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.9.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.8.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.7.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.6.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.5.1-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.5.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.4.1-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.4.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.3.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.2.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.1.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.0.0-1nodesource1 600 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 18.20.4+dfsg-1~deb12u1 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages 500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected Checking for nodejs vulnerability: █████ ██ ██ ██████ ██████ ██████ ██████ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ██ ██ ██ ███ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ███████ ██████ ██████ ██████ ██████ ██ *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Hosts: raspberrypi raspberrypi (version: 7.0.7, hostname: raspberrypi , alive, uptime: 62226) Core adapters versions js-controller: 7.0.7 admin: 7.7.2 javascript: 8.9.2 nodejs modules from github: 1 +-- iobroker.renault@0.0.21 (git+ssh://git@github.com/TA2k/ioBroker.renault.git#88555e6024eac2d1f016a9a1ef25f7c1bf965aea) Adapter State + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.backitup.0 : backitup : raspberrypi - enabled + system.adapter.digitalstrom.0 : digitalstrom : raspberrypi - enabled + system.adapter.discovery.0 : discovery : raspberrypi - enabled + system.adapter.fronius.0 : fronius : raspberrypi - enabled system.adapter.go-e.0 : go-e : raspberrypi - disabled + system.adapter.harmony.0 : harmony : raspberrypi - enabled + system.adapter.hue.0 : hue : raspberrypi - enabled, port: 443 + system.adapter.javascript.0 : javascript : raspberrypi - enabled system.adapter.mihome.0 : mihome : raspberrypi - disabled, port: 9898, bind: 0.0.0.0 + system.adapter.mystrom.0 : mystrom : raspberrypi - enabled + system.adapter.netatmo.0 : netatmo : raspberrypi - enabled system.adapter.nuki-extended.0 : nuki-extended : raspberrypi - disabled + system.adapter.renault.0 : renault : raspberrypi - enabled system.adapter.roborock.0 : roborock : raspberrypi - disabled + system.adapter.rpi2.0 : rpi2 : raspberrypi - enabled + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 system.adapter.sonos.0 : sonos : raspberrypi - disabled + system.adapter.swiss-weather-api.0 : swiss-weather-api : raspberrypi - enabled + system.adapter.telegram.0 : telegram : raspberrypi - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.viessmannapi.0 : viessmannapi : raspberrypi - enabled + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.yahka.0 : yahka : raspberrypi - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.hue.0 : hue : raspberrypi - enabled, port: 443 + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.telegram.0 : telegram : raspberrypi - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories ┌─────────┬────────────────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼────────────────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'Stable (default)' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'Beta (latest)' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴────────────────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): Stable (default) Upgrade policy: none Installed ioBroker-Adapters Used repository: Stable (default) Adapter "admin" : 7.7.2 , installed 7.7.2 Adapter "backitup" : 3.3.5 , installed 3.3.5 Adapter "digitalstrom" : 2.3.0 , installed 2.3.0 Adapter "discovery" : 5.0.0 , installed 5.0.0 Adapter "fronius" : 2.1.1 , installed 2.1.1 Adapter "go-e" : 1.0.41 , installed 1.0.41 Adapter "harmony" : 1.5.0 , installed 1.5.0 Adapter "hue" : 3.16.2 , installed 3.16.2 Adapter "javascript" : 8.9.2 , installed 8.9.2 Controller "js-controller": 7.0.7 , installed 7.0.7 Adapter "mihome" : 1.4.0 , installed 1.4.0 Adapter "netatmo" : 3.1.0 , installed 3.1.0 Adapter "nuki-extended": 2.7.0 , installed 2.7.0 Adapter "roborock" : 0.6.18 , installed 0.6.18 Adapter "rpi2" : 2.4.0 , installed 2.4.0 Adapter "shelly" : 10.2.0 , installed 10.2.0 Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "socketio" : 6.7.1 , installed 6.7.1 Adapter "sonos" : 3.0.0 , installed 3.0.0 Adapter "swiss-weather-api": 2.2.2, installed 2.2.2 Adapter "telegram" : 4.1.0 , installed 4.1.0 Adapter "viessmannapi" : 2.3.0 , installed 2.3.0 Adapter "web" : 7.0.8 , installed 7.0.8 Adapter "ws" : 2.6.2 , installed 2.6.2 Adapter "yahka" : 1.1.5 , installed 1.1.5 Objects and States Please stand by - This may take a while Objects: 44134 States: 37103 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian bookworm InRelease Hit:2 http://archive.raspberrypi.com/debian bookworm InRelease Hit:3 http://deb.debian.org/debian-security bookworm-security InRelease Hit:4 http://deb.debian.org/debian bookworm-updates InRelease Hit:5 https://deb.nodesource.com/node_22.x nodistro InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 5097 866/sshd: /usr/sbin tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 72003 17125/iobroker.js-c tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 74838 17125/iobroker.js-c tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 294632 28542/cupsd tcp 0 0 0.0.0.0:1882 0.0.0.0:* LISTEN 1001 75320 17372/io.shelly.0 tcp 0 0 127.0.0.1:43769 0.0.0.0:* LISTEN 1001 77117 17387/io.yahka.0 tcp6 0 0 :::61991 :::* LISTEN 1001 74736 17291/io.harmony.0 tcp6 0 0 :::33667 :::* LISTEN 1001 72254 17387/io.yahka.0 tcp6 0 0 :::22 :::* LISTEN 0 5099 866/sshd: /usr/sbin tcp6 0 0 ::1:631 :::* LISTEN 0 294631 28542/cupsd tcp6 0 0 :::8082 :::* LISTEN 1001 77077 17556/io.web.0 tcp6 0 0 :::8081 :::* LISTEN 1001 74908 17143/io.admin.0 udp 0 0 0.0.0.0:61991 0.0.0.0:* 1001 74737 17291/io.harmony.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 4978 679/avahi-daemon: r udp 0 0 0.0.0.0:46945 0.0.0.0:* 104 4980 679/avahi-daemon: r udp6 0 0 :::46250 :::* 104 4981 679/avahi-daemon: r udp6 0 0 :::5353 :::* 104 4979 679/avahi-daemon: r *** Log File - Last 25 Lines *** 2025-10-06 10:33:22.580 - info: digitalstrom.0 (17246) State value to set for "digitalstrom.0.apartment.sensors.outdoor.sunelevation" has to be type "number" but received type "string" 2025-10-06 10:34:22.504 - info: digitalstrom.0 (17246) State value to set for "digitalstrom.0.apartment.sensors.outdoor.sunazimuth" has to be type "number" but received type "string" 2025-10-06 10:34:22.570 - info: digitalstrom.0 (17246) State value to set for "digitalstrom.0.apartment.sensors.outdoor.sunelevation" has to be type "number" but received type "string" 2025-10-06 10:35:22.593 - info: digitalstrom.0 (17246) State value to set for "digitalstrom.0.apartment.sensors.outdoor.sunazimuth" has to be type "number" but received type "string" 2025-10-06 10:35:22.637 - info: digitalstrom.0 (17246) State value to set for "digitalstrom.0.apartment.sensors.outdoor.sunelevation" has to be type "number" but received type "string" 2025-10-06 10:36:22.041 - info: digitalstrom.0 (17246) State value to set for "digitalstrom.0.apartment.sensors.outdoor.sunazimuth" has to be type "number" but received type "string" 2025-10-06 10:36:22.140 - info: digitalstrom.0 (17246) State value to set for "digitalstrom.0.apartment.sensors.outdoor.sunelevation" has to be type "number" but received type "string" 2025-10-06 10:37:22.065 - info: digitalstrom.0 (17246) State value to set for "digitalstrom.0.apartment.sensors.outdoor.sunazimuth" has to be type "number" but received type "string" 2025-10-06 10:37:22.180 - info: digitalstrom.0 (17246) State value to set for "digitalstrom.0.apartment.sensors.outdoor.sunelevation" has to be type "number" but received type "string" 2025-10-06 10:38:22.104 - info: digitalstrom.0 (17246) State value to set for "digitalstrom.0.apartment.sensors.outdoor.sunazimuth" has to be type "number" but received type "string" 2025-10-06 10:38:22.205 - info: digitalstrom.0 (17246) State value to set for "digitalstrom.0.apartment.sensors.outdoor.sunelevation" has to be type "number" but received type "string" 2025-10-06 10:39:22.497 - info: digitalstrom.0 (17246) State value to set for "digitalstrom.0.apartment.sensors.outdoor.sunazimuth" has to be type "number" but received type "string" 2025-10-06 10:39:22.680 - info: digitalstrom.0 (17246) State value to set for "digitalstrom.0.apartment.sensors.outdoor.sunelevation" has to be type "number" but received type "string" 2025-10-06 10:40:22.524 - info: digitalstrom.0 (17246) State value to set for "digitalstrom.0.apartment.sensors.outdoor.sunazimuth" has to be type "number" but received type "string" 2025-10-06 10:40:22.628 - info: digitalstrom.0 (17246) State value to set for "digitalstrom.0.apartment.sensors.outdoor.sunelevation" has to be type "number" but received type "string" 2025-10-06 10:41:22.070 - info: digitalstrom.0 (17246) State value to set for "digitalstrom.0.apartment.sensors.outdoor.sunazimuth" has to be type "number" but received type "string" 2025-10-06 10:41:22.176 - info: digitalstrom.0 (17246) State value to set for "digitalstrom.0.apartment.sensors.outdoor.sunelevation" has to be type "number" but received type "string" 2025-10-06 10:42:22.115 - info: digitalstrom.0 (17246) State value to set for "digitalstrom.0.apartment.sensors.outdoor.sunazimuth" has to be type "number" but received type "string" 2025-10-06 10:42:22.220 - info: digitalstrom.0 (17246) State value to set for "digitalstrom.0.apartment.sensors.outdoor.sunelevation" has to be type "number" but received type "string" 2025-10-06 10:43:22.109 - info: digitalstrom.0 (17246) State value to set for "digitalstrom.0.apartment.sensors.outdoor.sunazimuth" has to be type "number" but received type "string" 2025-10-06 10:43:22.210 - info: digitalstrom.0 (17246) State value to set for "digitalstrom.0.apartment.sensors.outdoor.sunelevation" has to be type "number" but received type "string" 2025-10-06 10:44:22.126 - info: digitalstrom.0 (17246) State value to set for "digitalstrom.0.apartment.sensors.outdoor.sunazimuth" has to be type "number" but received type "string" 2025-10-06 10:44:22.224 - info: digitalstrom.0 (17246) State value to set for "digitalstrom.0.apartment.sensors.outdoor.sunelevation" has to be type "number" but received type "string" 2025-10-06 10:45:22.134 - info: digitalstrom.0 (17246) State value to set for "digitalstrom.0.apartment.sensors.outdoor.sunazimuth" has to be type "number" but received type "string" 2025-10-06 10:45:22.237 - info: digitalstrom.0 (17246) State value to set for "digitalstrom.0.apartment.sensors.outdoor.sunelevation" has to be type "number" but received type "string"============ Mark until here for C&P =============
iob diag has finished.
pi@raspberrypi:~ $ ========== Start marking the full check here ===========
Script v.2025-08-09 *** BASE SYSTEM *** Operating System: Debian GNU/Linux 12 (bookworm) Static hostname: raspberrypi Icon name: computer Kernel: Linux 6.6.51+rpt-rpi-2712 Architecture: arm64 OS is similar to: Model : Raspberry Pi 5 Model B Rev 1.0 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 10:45:47 up 18:27, 3 users, load average: 0.29, 0.16, 0.11 CPU threads: 4 *** LIFE CYCLE STATUS *** Debian 'bookworm' is the current oldstable version. Please upgrade to the latest stable release 'trixie' in due time! *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** TIME AND TIMEZONES *** Local time: Mon 2025-10-06 10:45:47 CEST Universal time: Mon 2025-10-06 08:45:47 UTC RTC time: Mon 2025-10-06 08:45:47 Time zone: Europe/Zurich (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': pi HOME=/home/pi GROUPS=pi adm dialout cdrom sudo audio video plugdev games users input render netdev lpadmin gpio i2c spi iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** DISPLAY-SERVER SETUP *** Display-Server: false Display-Manager: x lightdm.service - Light Display Manager Desktop: Session: tty ============ Mark until here for C&P ============= -
@thomas-braun ich habe das gleiche Problem nach eine Neustart meine ioBroker server. Die oberen Schritte habe ich schon durchgefuhrt und kann die Ergebnisse bereitstellen wenn nötig, aber ich gehe davon aus, dass eine Analyse mit die Informationen von @hugi schon angefangen hat.
-
@smalltower1 sagte in Viessmann Adapter keine Verbindung mehr:
die Ergebnisse bereitstellen
Mach doch. Dann kann man zumindest mal sehen, ob die sonstige Umgebung senkrecht steht.
-
Ich habe die Info. Gelöscht
-
Mit der Beta Version 2.4.3 funktioniert der Zugriff wieder. Danke für das Beheben, wer auch immer das war
-
@hugi Danke für die Info. Ich habe die Beta Version 2.4.0 probiert und es funktioniert auch
-
@hugi sorry, zu schnell gesprochen. Version 2.3.0 macht bei mir die Instanz Grün, aber die Werte werden nur ein mal aktualisiert, nicht jede Minute wie vorher. Wo hast du die 2.4.3 bekommen, Github?
