Zigbee Adaper läuft nicht

Sascha 0

@thomas-braun said in Zigbee Adaper läuft nicht:

@sascha-0

Erste Maßnahme:

Kiste updaten und dann nodejs22 installieren.

Wie geht das? Das hier war nicht erfolgrich:

admin@raspberrypi:~ $ node -v
v20.19.1
admin@raspberrypi:~ $ sudo apt-get install nodejs
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
The following packages will be upgraded:
  nodejs
1 upgraded, 0 newly installed, 0 to remove and 162 not upgraded.
Need to get 31.0 MB of archives.
After this operation, 439 kB disk space will be freed.
Get:1 https://deb.nodesource.com/node_20.x nodistro/main arm64 nodejs arm64 20.19.5-1nodesource1 [31.0 MB]
Fetched 31.0 MB in 3s (8,905 kB/s)
Reading changelogs... Done
(Reading database ... 69029 files and directories currently installed.)
Preparing to unpack .../nodejs_20.19.5-1nodesource1_arm64.deb ...
Detected old npm client, removing...
Unpacking nodejs (20.19.5-1nodesource1) over (20.19.1-1nodesource1) ...
Setting up nodejs (20.19.5-1nodesource1) ...
Processing triggers for man-db (2.11.2-2) ...
admin@raspberrypi:~ $ node -v
v20.19.5
admin@raspberrypi:~ $

Codierknecht

@sascha-0 sagte in Zigbee Adaper läuft nicht:

Das hier war nicht erfolgrich

Das macht man auch nicht "von Hand" sondern per

iob nodejs-update 22

MartinP

@sascha-0 ich würde zuerst den Unterbau mit

sudo apt update
sudo apt full-upgrade

Auf den aktuellen Stand bringen

Danach...

https://forum.iobroker.net/topic/81893/wir-empfehlen-node-js-22-x

Asgothian

@sascha-0 sagte in Zigbee Adaper läuft nicht:

@thomas-braun said in Zigbee Adaper läuft nicht:

@sascha-0

Erste Maßnahme:

Kiste updaten und dann nodejs22 installieren.

Wie geht das? Das hier war nicht erfolgrich:

Wenn du damit fertig bist (oder aufgegeben hast) den Unterbau zu aktualisieren, und der Fehler noch da ist (wovon ich fest ausgehe) solltest du prüfen welcher Prozess die serielle Schnittstelle blockiert. Ein lsof | grep -e usb-Itead_Sonoff_Zigbee sollte dich da weiter bringen.

Zusätzlich macht es ggf. Sinn statt Start/Stop zu nutzen zunächst einmal sicher zu stellen das die Schnittstelle frei ist. Dazu gibt es diesen Button Screenshot 2025-10-23 at 09.03.33.png . Der sollte Dir sagen ob der Port frei ist oder nicht. Solange der nicht sagt das alles frei ist macht es auch keinen Sinn via Start/Stop etwas zu machen.

A.

Sascha 0

@asgothian said in Zigbee Adaper läuft nicht:

So habe jetzt alles Upgedated und keinen Erfolg gehabt.

Das kommt bei Test Port:

reading access rights for /dev/serial/by-id/usb-Itead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_V2_7a6336835bf3ef119b6dbb1b6d9880ab-if00-port0
read and write access available for /dev/serial/by-id/usb-Itead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_V2_7a6336835bf3ef119b6dbb1b6d9880ab-if00-port0

Und das hier bei Start/Stop:

overriding zigbee options with:
extPanID : a019c6b597d65071
panID : 8820
channel : 15
port : /dev/serial/by-id/usb-Itead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_V2_7a6336835bf3ef119b6dbb1b6d9880ab-if00-port0
adapterType : zstack
baudRate : 115200
precfgkey : 01030507090B0D0F00020406080A0C0D
flowCTRL : false
Starting Adapter npm ...
Installed Version: iobroker.zigbee@3.1.5 (Converters 25.31.0 Herdsman 6.3.1)
Starting zigbee-herdsman...
Unable to obtain herdsman settings
Starting zigbee-herdsman problem : Error Resource temporarily unavailable Cannot lock port
Failed to start Zigbee: no message given```

Der andere Befehl bring das hier:

admin@raspberrypi:~ $ lsof | grep -e usb-Itead_Sonoff_Zigbee
-bash: lsof: command not found

Sascha 0

So die ganze Mühle ist aktualisiert und iob diag bringt das hier:

Script v.2025-08-09

*** BASE SYSTEM ***
Operating System: Debian GNU/Linux 12 (bookworm)
 Static hostname: raspberrypi
       Icon name: computer
          Kernel: Linux 6.12.25+rpt-rpi-v8
    Architecture: arm64
OS is similar to:

Model           : Raspberry Pi 4 Model B Rev 1.5
Docker          : false
Virtualization  : none
Kernel          : aarch64
Userland        : 64 bit

Systemuptime and Load:
 09:37:11 up  1:53,  2 users,  load average: 2.33, 2.90, 2.84
CPU threads: 4


*** LIFE CYCLE STATUS ***
Debian 'bookworm' is the current oldstable version. Please upgrade to the latest stable release 'trixie' in due time!

*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

*** TIME AND TIMEZONES ***
               Local time: Thu 2025-10-23 09:37:11 CEST
           Universal time: Thu 2025-10-23 07:37:11 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** Users and Groups ***
User that called 'iob diag':
admin
HOME=/home/admin
GROUPS=admin adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker

User that is running 'js-controller':
iobroker
HOME=/home/iobroker
GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c

*** DISPLAY-SERVER SETUP ***
Display-Server:         false
Unit display-manager.service could not be found.
Display-Manager:
Desktop:
Session:                tty

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            1.9G        1.5G        116M        352K        384M        421M
Swap:           536M        484M         52M
Total:          2.5G        2.0G        168M

Active iob-Instances:   21

         1846 M total memory
         1444 M used memory
          990 M active memory
          524 M inactive memory
          111 M free memory
           28 M buffer memory
          338 M swap cache
          511 M total swap
          462 M used swap
           49 M free swap

*** top - Table Of Processes  ***
top - 09:37:12 up  1:53,  2 users,  load average: 2.33, 2.90, 2.84
Tasks: 196 total,   2 running, 194 sleeping,   0 stopped,   0 zombie
%Cpu(s): 22.2 us, 33.3 sy,  0.0 ni, 33.3 id,  0.0 wa,  0.0 hi, 11.1 si,  0.0 st
MiB Mem :   1846.3 total,    111.3 free,   1444.3 used,    367.2 buff/cache
MiB Swap:    512.0 total,     49.7 free,    462.3 used.    402.0 avail Mem

*** FAILED SERVICES ***

  UNIT LOAD ACTIVE SUB DESCRIPTION
0 loaded units listed.


*** DMESG CRITICAL ERRORS ***
No critical errors detected

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  659M     0  659M   0% /dev
tmpfs          tmpfs     185M  4.3M  181M   3% /run
/dev/mmcblk0p2 ext4      115G   17G   93G  16% /
tmpfs          tmpfs     924M     0  924M   0% /dev/shm
tmpfs          tmpfs     5.0M   16K  5.0M   1% /run/lock
/dev/mmcblk0p1 vfat      510M   58M  453M  12% /boot/firmware
tmpfs          tmpfs     185M     0  185M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Thu Oct 23 07:44:04 2025] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 cgroup_disable=memory numa_policy=interleave snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0  smsc95xx.macaddr=E4:5F:01:CF:41:0E vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=ttyS0,115200 console=tty1 root=PARTUUID=5c449d3e-02 rootfstype=ext4 fsck.repair=yes rootwait
[Thu Oct 23 07:44:05 2025] EXT4-fs (mmcblk0p2): mounted filesystem 8f6cdea4-22b2-47be-88eb-087a00e3ee2b ro with ordered data mode. Quota mode: none.
[Thu Oct 23 07:44:06 2025] EXT4-fs (mmcblk0p2): re-mounted 8f6cdea4-22b2-47be-88eb-087a00e3ee2b r/w. Quota mode: none.

Show mounted filesystems:
TARGET           SOURCE         FSTYPE OPTIONS
/                /dev/mmcblk0p2 ext4   rw,noatime,commit=600
`-/boot/firmware /dev/mmcblk0p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
951M    /var/
270M    /var/cache
264M    /var/cache/apt
168M    /var/lib
151M    /var/cache/apt/archives

Archived and active journals take up 3.1M in the file system.

/opt/iobroker/backups:
160M    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
11G     /opt/iobroker/iobroker-data/ioBroker_History
11G     /opt/iobroker/iobroker-data/
199M    /opt/iobroker/iobroker-data/files
109M    /opt/iobroker/iobroker-data/backup-objects
100M    /opt/iobroker/iobroker-data/sonosCache

The five largest files in iobroker-data are:
29M     /opt/iobroker/iobroker-data/objects.jsonl
24M     /opt/iobroker/iobroker-data/files/modbus.admin/static/js/main.6a71b34c.js.map
18M     /opt/iobroker/iobroker-data/files/matter.admin/assets/index-CkWJSD9z.js
11M     /opt/iobroker/iobroker-data/ioBroker_History/20250723/history.0_userdata.0.PV.Stromverbrauch_aktuell.json
11M     /opt/iobroker/iobroker-data/ioBroker_History/20250613/history.0_userdata.0.PV.Stromverbrauch_aktuell.json

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':

/dev/serial/by-id/usb-Itead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_V2_7a6336835bf3ef119b6dbb1b6d9880ab-if00-port0
/dev/serial/by-id/usb-1a86_USB2.0-Ser_-if00-port0

*** ZigBee Settings ***

HINT:
Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting:
/dev/serial/by-id/usb-Itead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_V2_7a6336835bf3ef119b6dbb1b6d9880ab-if00-port0
Zigbee Network Settings on your coordinator/in nvbackup are:

zigbee.X
Extended Pan ID:
*** MASKED ***
Pan ID:
*** MASKED ***
Channel:
*** MASKED ***
Network Key:
*** MASKED ***

To unmask the settings run 'iob diag --unmask'


*** NodeJS-Installation ***

/usr/bin/nodejs         v22.21.0
/usr/bin/node           v22.21.0
/usr/bin/npm            10.9.4
/usr/bin/npx            10.9.4
/usr/bin/corepack       0.34.0

nodejs:
  Installed: 22.21.0-1nodesource1
  Candidate: 22.21.0-1nodesource1
  Version table:
 *** 22.21.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
        100 /var/lib/dpkg/status
     22.20.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.19.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.18.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.17.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.17.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.16.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.15.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.15.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.14.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.13.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.13.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.12.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.11.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.10.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.9.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.8.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.7.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.6.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.5.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.5.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.4.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.4.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.3.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.2.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.1.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.0.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     18.20.4+dfsg-1~deb12u1 500
        500 http://deb.debian.org/debian bookworm/main arm64 Packages
        500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages

Temp directories causing deletion problem: 0
No problems detected

Errors in npm tree: 0
No problems detected

Checking for nodejs vulnerability:


 █████  ██      ██           ██████   ██████   ██████  ██████         ██
██   ██ ██      ██          ██       ██    ██ ██    ██ ██   ██     ██  ██
███████ ██      ██          ██   ███ ██    ██ ██    ██ ██   ██         ██
██   ██ ██      ██          ██    ██ ██    ██ ██    ██ ██   ██     ██  ██
██   ██ ███████ ███████      ██████   ██████   ██████  ██████         ██



*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Hosts:
raspberrypi         raspberrypi (version: 7.0.7, hostname: raspberrypi   , alive, uptime: 1504)

Core adapters versions
js-controller:  7.0.7
admin:          7.7.2
javascript:     8.9.2

nodejs modules from github:     0

Adapter State
+ system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
  system.adapter.alias-manager.0          : alias-manager         : raspberrypi                              - disabled
+ system.adapter.backitup.0               : backitup              : raspberrypi                              -  enabled
  system.adapter.devices.0                : devices               : raspberrypi                              - disabled
  system.adapter.discovery.0              : discovery             : raspberrypi                              - disabled
+ system.adapter.doorbird.0               : doorbird              : raspberrypi                              -  enabled
  system.adapter.dwd.0                    : dwd                   : raspberrypi                              -  enabled
+ system.adapter.email.0                  : email                 : raspberrypi                              -  enabled
  system.adapter.feiertage.0              : feiertage             : raspberrypi                              -  enabled
  system.adapter.flot.0                   : flot                  : raspberrypi                              - disabled
+ system.adapter.followthesun.0           : followthesun          : raspberrypi                              -  enabled
+ system.adapter.fronius.0                : fronius               : raspberrypi                              -  enabled
  system.adapter.go-e.0                   : go-e                  : raspberrypi                              - disabled
+ system.adapter.history.0                : history               : raspberrypi                              -  enabled
  system.adapter.ical.0                   : ical                  : raspberrypi                              - disabled
+ system.adapter.javascript.0             : javascript            : raspberrypi                              -  enabled
  system.adapter.matter.0                 : matter                : raspberrypi                              - disabled
+ system.adapter.modbus.0                 : modbus                : raspberrypi                              -  enabled
+ system.adapter.netatmo.0                : netatmo               : raspberrypi                              -  enabled
+ system.adapter.openknx.0                : openknx               : raspberrypi                              -  enabled
  system.adapter.operating-hours.0        : operating-hours       : raspberrypi                              - disabled
+ system.adapter.pushsafer.0              : pushsafer             : raspberrypi                              -  enabled
  system.adapter.pvforecast.0             : pvforecast            : raspberrypi                              - disabled
  system.adapter.roborock.0               : roborock              : raspberrypi                              - disabled
  system.adapter.sayit.0                  : sayit                 : raspberrypi                              -  enabled
  system.adapter.schoolfree.0             : schoolfree            : raspberrypi                              -  enabled
+ system.adapter.simple-api.0             : simple-api            : raspberrypi                              -  enabled, port: 8087, bind: 0.0.0.0, run as: admin
+ system.adapter.smartgarden.0            : smartgarden           : raspberrypi                              -  enabled
+ system.adapter.sonos.0                  : sonos                 : raspberrypi                              -  enabled
+ system.adapter.statistics.0             : statistics            : raspberrypi                              -  enabled
+ system.adapter.tr-064.0                 : tr-064                : raspberrypi                              -  enabled
  system.adapter.weatherunderground.0     : weatherunderground    : raspberrypi                              -  enabled
+ system.adapter.web.0                    : web                   : raspberrypi                              -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.yahka.0                  : yahka                 : raspberrypi                              -  enabled
+ system.adapter.zigbee.0                 : zigbee                : raspberrypi                              -  enabled, port: /dev/serial/by-id/usb-Itead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_V2_7a6336835bf3ef119b6dbb1b6d9880ab-if00-port0

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.simple-api.0             : simple-api            : raspberrypi                              -  enabled, port: 8087, bind: 0.0.0.0, run as: admin
+ system.adapter.web.0                    : web                   : raspberrypi                              -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.zigbee.0                 : zigbee                : raspberrypi                              -  enabled, port: /dev/serial/by-id/usb-Itead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_V2_7a6336835bf3ef119b6dbb1b6d9880ab-if00-port0

ioBroker-Repositories
┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐
│ (index) │ name     │ url                                                     │ auto upgrade │
├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤
│ 0       │ 'stable' │ 'http://download.iobroker.net/sources-dist.json'        │ true         │
│ 1       │ 'beta'   │ 'http://download.iobroker.net/sources-dist-latest.json' │ false        │
└─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘

Active repo(s): stable
Upgrade policy: minor

Installed ioBroker-Adapters
Used repository: stable
Adapter    "admin"        : 7.7.2    , installed 7.7.2
Adapter    "alias-manager": 2.0.0    , installed 2.0.0
Adapter    "backitup"     : 3.3.5    , installed 3.3.5
Adapter    "devices"      : 1.2.8    , installed 1.2.8
Adapter    "discovery"    : 5.0.0    , installed 5.0.0
Adapter    "doorbird"     : 3.0.0    , installed 3.0.0
Adapter    "dwd"          : 2.8.5    , installed 2.8.5
Adapter    "email"        : 2.0.4    , installed 2.0.4
Adapter    "feiertage"    : 1.2.1    , installed 1.2.1
Adapter    "flot"         : 1.12.0   , installed 1.12.0
Adapter    "followthesun" : 0.5.2    , installed 0.5.2
Adapter    "fronius"      : 2.1.1    , installed 2.1.1
Adapter    "go-e"         : 1.0.41   , installed 1.0.41
Adapter    "history"      : 3.0.1    , installed 3.0.1
Adapter    "ical"         : 1.17.0   , installed 1.17.0
Adapter    "javascript"   : 8.9.2    , installed 8.9.2
Controller "js-controller": 7.0.7    , installed 7.0.7
Adapter    "matter"       : 0.5.5    , installed 0.5.5
Adapter    "modbus"       : 6.3.2    , installed 6.3.2
Adapter    "netatmo"      : 3.1.0    , installed 3.1.0
Adapter    "openknx"      : 0.9.0    , installed 0.9.0
Adapter    "operating-hours": 1.3.0  , installed 1.3.0
Adapter    "pushsafer"    : 1.1.0    , installed 1.1.0
Adapter    "pvforecast"   : 5.0.0    , installed 5.0.0
Adapter    "roborock"     : 0.6.18   , installed 0.6.18
Adapter    "sayit"        : 5.0.0    , installed 5.0.0
Adapter    "schoolfree"   : 1.1.12   , installed 1.1.12
Adapter    "simple-api"   : 2.8.0    , installed 2.8.0
Adapter    "smartgarden"  : 2.0.1    , installed 2.0.1
Adapter    "socketio"     : 6.7.1    , installed 6.7.1
Adapter    "sonos"        : 3.0.0    , installed 3.0.0
Adapter    "statistics"   : 2.4.0    , installed 2.4.0
Adapter    "tr-064"       : 4.3.0    , installed 4.3.0
Adapter    "weatherunderground": 3.7.0, installed 3.7.0
Adapter    "web"          : 7.0.8    , installed 7.0.8
Adapter    "ws"           : 2.6.2    , installed 2.6.2
Adapter    "yahka"        : 1.1.5    , installed 1.1.5
Adapter    "zigbee"       : 3.1.5    , installed 3.1.5

Objects and States
Please stand by - This may take a while
Objects:        6967
States:         5721

*** OS-Repositories and Updates ***
Hit:1 http://deb.debian.org/debian bookworm InRelease
Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease
Hit:3 http://deb.debian.org/debian bookworm-updates InRelease
Hit:4 http://archive.raspberrypi.com/debian bookworm InRelease
Hit:5 https://deb.nodesource.com/node_22.x nodistro InRelease
Reading package lists...
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name  
tcp        0      0 127.0.0.1:45649         0.0.0.0:*               LISTEN      1001       83667      38354/io.yahka.0  
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       83258      38026/iobroker.js-c
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       82405      38026/iobroker.js-c
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          73227      30450/sshd: /usr/sb
tcp        0      0 192.168.10.13:8100      0.0.0.0:*               LISTEN      1001       83671      38395/io.doorbird.0
tcp6       0      0 :::8087                 :::*                    LISTEN      1001       85385      38455/io.simple-api
tcp6       0      0 :::8082                 :::*                    LISTEN      1001       86134      38500/io.web.0    
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       79792      38048/io.admin.0  
tcp6       0      0 :::3500                 :::*                    LISTEN      1001       84206      38298/io.sonos.0  
tcp6       0      0 :::22                   :::*                    LISTEN      0          73229      30450/sshd: /usr/sb
tcp6       0      0 :::40033                :::*                    LISTEN      1001       83666      38354/io.yahka.0  
udp        0      0 0.0.0.0:53381           0.0.0.0:*                           104        6399       456/avahi-daemon: r
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           104        6397       456/avahi-daemon: r
udp        0      0 0.0.0.0:41727           0.0.0.0:*                           1001       82677      38267/io.openknx.0
udp6       0      0 :::5353                 :::*                                104        6398       456/avahi-daemon: r
udp6       0      0 fe80::83ef:c731:b6f:546 :::*                                0          6487       533/NetworkManager
udp6       0      0 :::50840                :::*                                104        6400       456/avahi-daemon: r

*** Log File - Last 25 Lines ***

2025-10-23 09:38:09.131  - info: host.raspberrypi stopInstance timeout 1000 system.adapter.sayit.0 killing pid 44447
2025-10-23 09:38:09.200  - warn: host.raspberrypi instance system.adapter.sayit.0 terminated due to SIGKILL
2025-10-23 09:38:09.200  - info: host.raspberrypi instance system.adapter.sayit.0 terminated with code null ()
2025-10-23 09:38:09.819  - info: host.raspberrypi instance system.adapter.sayit.0 in version "5.0.0" started with pid 44820
2025-10-23 09:38:13.662  - info: sayit.0 (44820) starting. Version 5.0.0 in /opt/iobroker/node_modules/iobroker.sayit, node: v22.21.0, js-controller: 7.0.7
2025-10-23 09:38:13.903  - info: sayit.0 (44820) Upload announce mp3 files
2025-10-23 09:38:14.055  - info: host.raspberrypi stopInstance system.adapter.sayit.0 (force=false, process=true)
2025-10-23 09:38:14.060  - info: sayit.0 (44820) stopping...
2025-10-23 09:38:14.567  - info: sayit.0 (44820) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2025-10-23 09:38:15.056  - info: host.raspberrypi stopInstance timeout 1000 system.adapter.sayit.0 killing pid 44820
2025-10-23 09:38:15.122  - warn: host.raspberrypi instance system.adapter.sayit.0 terminated due to SIGKILL
2025-10-23 09:38:15.123  - info: host.raspberrypi instance system.adapter.sayit.0 terminated with code null ()
2025-10-23 09:38:15.719  - info: host.raspberrypi instance system.adapter.sayit.0 in version "5.0.0" started with pid 44853
2025-10-23 09:38:18.288  - info: zigbee.0 (38369) Unable to obtain herdsman settings
2025-10-23 09:38:19.416  - error: zigbee.0 (38369) Starting zigbee-herdsman problem : Failed to connect to the adapter (Error: SRSP - SYS - ping after 6000ms)
2025-10-23 09:38:19.417  - error: zigbee.0 (38369) Failed to start Zigbee: no message given
2025-10-23 09:38:23.321  - info: sayit.0 (44853) starting. Version 5.0.0 in /opt/iobroker/node_modules/iobroker.sayit, node: v22.21.0, js-controller: 7.0.7
2025-10-23 09:38:23.510  - info: sayit.0 (44853) Upload announce mp3 files
2025-10-23 09:38:23.560  - info: host.raspberrypi stopInstance system.adapter.sayit.0 (force=false, process=true)
2025-10-23 09:38:23.570  - info: sayit.0 (44853) stopping...
2025-10-23 09:38:24.077  - info: sayit.0 (44853) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2025-10-23 09:38:24.561  - info: host.raspberrypi stopInstance timeout 1000 system.adapter.sayit.0 killing pid 44853
2025-10-23 09:38:24.634  - warn: host.raspberrypi instance system.adapter.sayit.0 terminated due to SIGKILL
2025-10-23 09:38:24.634  - info: host.raspberrypi instance system.adapter.sayit.0 terminated with code null ()
2025-10-23 09:38:25.635  - info: host.raspberrypi instance system.adapter.sayit.0 in version "5.0.0" started with pid 45243

Thomas Braun

@sascha-0 sagte in Zigbee Adaper läuft nicht:
Mich wundert das:

USB-Devices by-id:                    
USB-Sticks -  Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':
/dev/serial/by-id/usb-Itead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_V2_7a6336835bf3ef119b6dbb1b6d9880ab-if00-port0                                                                                                                                                                            /dev/serial/by-id/usb-1a86_USB2.0-Ser_-if00-port0                                                                                                                                                                                                                                                                                                                                                         

*** ZigBee Settings ***                                                                                                                                                                                                                                                                                                                                                         HINT:                                  
Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting:
/dev/serial/by-id/usb-Itead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_V2_7a6336835bf3ef119b6dbb1b6d9880ab-if00-port0

Ist da vielleicht ein Leerzeichen in den Einstellungen mit reingerutscht?

Thomas Braun

@sascha-0 sagte in Zigbee Adaper läuft nicht:

-bash: lsof: command not found

Mit

sudo apt install lsof

das Programm nachinstallieren.

Asgothian

@thomas-braun sagte in Zigbee Adaper läuft nicht:

Ist da vielleicht ein Leerzeichen in den Einstellungen mit reingerutscht?

Eher nein - Dieser Test nutzt die gleichen Einstellungen:

@sascha-0 sagte in Zigbee Adaper läuft nicht:

Das kommt bei Test Port:

reading access rights for /dev/serial/by-id/usb-Itead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_V2_7a6336835bf3ef119b6dbb1b6d9880ab-if00-port0                                                                                                                                                                         > read and write access available for /dev/serial/by-id/usb-Itead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_V2_7a6336835bf3ef119b6dbb1b6d9880ab-if00-port0

Sascha 0

@thomas-braun said in Zigbee Adaper läuft nicht:

@sascha-0 sagte in Zigbee Adaper läuft nicht:
Mich wundert das:

USB-Devices by-id:                    
USB-Sticks -  Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':
/dev/serial/by-id/usb-Itead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_V2_7a6336835bf3ef119b6dbb1b6d9880ab-if00-port0                                                                                                                                                                            /dev/serial/by-id/usb-1a86_USB2.0-Ser_-if00-port0                                                                                                                                                                                                                                                                                                                                                         

*** ZigBee Settings ***                                                                                                                                                                                                                                                                                                                                                         HINT:                                  
Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting:
/dev/serial/by-id/usb-Itead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_V2_7a6336835bf3ef119b6dbb1b6d9880ab-if00-port0

Ist da vielleicht ein Leerzeichen in den Einstellungen mit reingerutscht?

Dahinter ist kein Leerzeichen, dazwischen kann ich keine Unterschiede sehen.

Sascha 0

@asgothian said in Zigbee Adaper läuft nicht:

Ein lsof | grep -e usb-Itead_Sonoff_Zigbee sollte dich da weiter bringen.

Das liefert nix erkennbares:

admin@raspberrypi:~ $ lsof | grep -e usb-Itead_Sonoff_Zigbee
admin@raspberrypi:~ $

Thomas Braun

@sascha-0

error: zigbee.0 (38369) Starting zigbee-herdsman problem : Failed to connect to the adapter (Error: SRSP - SYS - ping after 6000ms)

Steck den Stick mal eine Minute auf zwei aus und dann wieder rein. Vielleicht auch mal die Firmwareupdaten, jenachdem wie alt die ist.

Sascha 0

@thomas-braun said in Zigbee Adaper läuft nicht:

@sascha-0

error: zigbee.0 (38369) Starting zigbee-herdsman problem : Failed to connect to the adapter (Error: SRSP - SYS - ping after 6000ms)

Steck den Stick mal eine Minute auf zwei aus und dann wieder rein. Vielleicht auch mal die Firmwareupdaten, jenachdem wie alt die ist.

Hab ich gemacht, der Sonoff Flasher hat auch eine aktuellere Version gefunden.
Das Ergebnis ist gleich:

overriding zigbee options with:
extPanID : a019c6b597d65071
panID : 8820
channel : 15
port : /dev/serial/by-id/usb-Itead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_V2_7a6336835bf3ef119b6dbb1b6d9880ab-if00-port0
adapterType : zstack
baudRate : 115200
precfgkey : 01030507090B0D0F00020406080A0C0D
flowCTRL : false
Starting Adapter npm ...
Installed Version: iobroker.zigbee@3.1.5 (Converters 25.31.0 Herdsman 6.3.1)
Starting zigbee-herdsman...
Unable to obtain herdsman settings
Starting zigbee-herdsman problem : Failed to connect to the adapter (Error: SRSP - SYS - ping after 6000ms)
Failed to start Zigbee: no message given

Hier noch der neueste Diag:

Script v.2025-08-09

*** BASE SYSTEM ***
Operating System: Debian GNU/Linux 12 (bookworm)
 Static hostname: raspberrypi
       Icon name: computer
          Kernel: Linux 6.12.25+rpt-rpi-v8
    Architecture: arm64
OS is similar to:

Model           : Raspberry Pi 4 Model B Rev 1.5
Docker          : false
Virtualization  : none
Kernel          : aarch64
Userland        : 64 bit

Systemuptime and Load:
 13:24:08 up  5:40,  2 users,  load average: 2.96, 2.98, 2.68
CPU threads: 4


*** LIFE CYCLE STATUS ***
Debian 'bookworm' is the current oldstable version. Please upgrade to the latest stable release 'trixie' in due time!

*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

*** TIME AND TIMEZONES ***
               Local time: Thu 2025-10-23 13:24:09 CEST
           Universal time: Thu 2025-10-23 11:24:09 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** Users and Groups ***
User that called 'iob diag':
admin
HOME=/home/admin
GROUPS=admin adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker

User that is running 'js-controller':
iobroker
HOME=/home/iobroker
GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c

*** DISPLAY-SERVER SETUP ***
Display-Server:         false
Unit display-manager.service could not be found.
Display-Manager:
Desktop:
Session:                tty

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            1.9G        1.5G        155M        1.5M        316M        398M
Swap:           536M        536M        327K
Total:          2.5G        2.1G        155M

Active iob-Instances:   21

         1846 M total memory
         1466 M used memory
          658 M active memory
          844 M inactive memory
          147 M free memory
           25 M buffer memory
          277 M swap cache
          511 M total swap
          511 M used swap
            0 M free swap

*** top - Table Of Processes  ***
top - 13:24:09 up  5:40,  2 users,  load average: 2.96, 2.98, 2.68
Tasks: 201 total,   4 running, 197 sleeping,   0 stopped,   0 zombie
%Cpu(s): 62.5 us, 12.5 sy,  0.0 ni, 25.0 id,  0.0 wa,  0.0 hi,  0.0 si,  0.0 st
MiB Mem :   1846.3 total,    146.0 free,   1467.7 used,    302.3 buff/cache
MiB Swap:    512.0 total,      0.3 free,    511.7 used.    378.6 avail Mem

*** FAILED SERVICES ***

  UNIT LOAD ACTIVE SUB DESCRIPTION
0 loaded units listed.


*** DMESG CRITICAL ERRORS ***
No critical errors detected

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  659M     0  659M   0% /dev
tmpfs          tmpfs     185M  4.3M  181M   3% /run
/dev/mmcblk0p2 ext4      115G   17G   93G  16% /
tmpfs          tmpfs     924M     0  924M   0% /dev/shm
tmpfs          tmpfs     5.0M   16K  5.0M   1% /run/lock
/dev/mmcblk0p1 vfat      510M   58M  453M  12% /boot/firmware
tmpfs          tmpfs     185M     0  185M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Thu Oct 23 07:44:04 2025] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 cgroup_disable=memory numa_policy=interleave snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0  smsc95xx.macaddr=E4:5F:01:CF:41:0E vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=ttyS0,115200 console=tty1 root=PARTUUID=5c449d3e-02 rootfstype=ext4 fsck.repair=yes rootwait
[Thu Oct 23 07:44:05 2025] EXT4-fs (mmcblk0p2): mounted filesystem 8f6cdea4-22b2-47be-88eb-087a00e3ee2b ro with ordered data mode. Quota mode: none.
[Thu Oct 23 07:44:06 2025] EXT4-fs (mmcblk0p2): re-mounted 8f6cdea4-22b2-47be-88eb-087a00e3ee2b r/w. Quota mode: none.

Show mounted filesystems:
TARGET           SOURCE         FSTYPE OPTIONS
/                /dev/mmcblk0p2 ext4   rw,noatime,commit=600
`-/boot/firmware /dev/mmcblk0p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
951M    /var/
270M    /var/cache
264M    /var/cache/apt
168M    /var/lib
151M    /var/cache/apt/archives

Archived and active journals take up 3.1M in the file system.

/opt/iobroker/backups:
160M    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
11G     /opt/iobroker/iobroker-data/ioBroker_History
11G     /opt/iobroker/iobroker-data/
199M    /opt/iobroker/iobroker-data/files
109M    /opt/iobroker/iobroker-data/backup-objects
100M    /opt/iobroker/iobroker-data/sonosCache

The five largest files in iobroker-data are:
24M     /opt/iobroker/iobroker-data/objects.jsonl
24M     /opt/iobroker/iobroker-data/files/modbus.admin/static/js/main.6a71b34c.js.map
18M     /opt/iobroker/iobroker-data/files/matter.admin/assets/index-CkWJSD9z.js
16M     /opt/iobroker/iobroker-data/states.jsonl
11M     /opt/iobroker/iobroker-data/ioBroker_History/20250723/history.0_userdata.0.PV.Stromverbrauch_aktuell.json

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':

/dev/serial/by-id/usb-Itead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_V2_7a6336835bf3ef119b6dbb1b6d9880ab-if00-port0
/dev/serial/by-id/usb-1a86_USB2.0-Ser_-if00-port0

*** ZigBee Settings ***

HINT:
Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting:
/dev/serial/by-id/usb-Itead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_V2_7a6336835bf3ef119b6dbb1b6d9880ab-if00-port0
Zigbee Network Settings on your coordinator/in nvbackup are:

zigbee.X
Extended Pan ID:
*** MASKED ***
Pan ID:
*** MASKED ***
Channel:
*** MASKED ***
Network Key:
*** MASKED ***

To unmask the settings run 'iob diag --unmask'


*** NodeJS-Installation ***

/usr/bin/nodejs         v22.21.0
/usr/bin/node           v22.21.0
/usr/bin/npm            10.9.4
/usr/bin/npx            10.9.4
/usr/bin/corepack       0.34.0

nodejs:
  Installed: 22.21.0-1nodesource1
  Candidate: 22.21.0-1nodesource1
  Version table:
 *** 22.21.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
        100 /var/lib/dpkg/status
     22.20.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.19.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.18.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.17.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.17.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.16.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.15.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.15.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.14.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.13.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.13.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.12.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.11.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.10.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.9.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.8.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.7.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.6.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.5.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.5.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.4.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.4.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.3.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.2.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.1.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.0.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     18.20.4+dfsg-1~deb12u1 500
        500 http://deb.debian.org/debian bookworm/main arm64 Packages
        500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages

Temp directories causing deletion problem: 0
No problems detected

Errors in npm tree: 0
No problems detected

Checking for nodejs vulnerability:


 █████  ██      ██           ██████   ██████   ██████  ██████         ██
██   ██ ██      ██          ██       ██    ██ ██    ██ ██   ██     ██  ██
███████ ██      ██          ██   ███ ██    ██ ██    ██ ██   ██         ██
██   ██ ██      ██          ██    ██ ██    ██ ██    ██ ██   ██     ██  ██
██   ██ ███████ ███████      ██████   ██████   ██████  ██████         ██



*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Hosts:
raspberrypi         raspberrypi (version: 7.0.7, hostname: raspberrypi   , alive, uptime: 15113)

Core adapters versions
js-controller:  7.0.7
admin:          7.7.2
javascript:     8.9.2

nodejs modules from github:     0

Adapter State
+ system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
  system.adapter.alias-manager.0          : alias-manager         : raspberrypi                              - disabled
+ system.adapter.backitup.0               : backitup              : raspberrypi                              -  enabled
  system.adapter.devices.0                : devices               : raspberrypi                              - disabled
  system.adapter.discovery.0              : discovery             : raspberrypi                              - disabled
+ system.adapter.doorbird.0               : doorbird              : raspberrypi                              -  enabled
  system.adapter.dwd.0                    : dwd                   : raspberrypi                              -  enabled
+ system.adapter.email.0                  : email                 : raspberrypi                              -  enabled
  system.adapter.feiertage.0              : feiertage             : raspberrypi                              -  enabled
  system.adapter.flot.0                   : flot                  : raspberrypi                              - disabled
+ system.adapter.followthesun.0           : followthesun          : raspberrypi                              -  enabled
+ system.adapter.fronius.0                : fronius               : raspberrypi                              -  enabled
  system.adapter.go-e.0                   : go-e                  : raspberrypi                              - disabled
+ system.adapter.history.0                : history               : raspberrypi                              -  enabled
  system.adapter.ical.0                   : ical                  : raspberrypi                              - disabled
+ system.adapter.javascript.0             : javascript            : raspberrypi                              -  enabled
  system.adapter.matter.0                 : matter                : raspberrypi                              - disabled
+ system.adapter.modbus.0                 : modbus                : raspberrypi                              -  enabled
+ system.adapter.netatmo.0                : netatmo               : raspberrypi                              -  enabled
+ system.adapter.openknx.0                : openknx               : raspberrypi                              -  enabled
  system.adapter.operating-hours.0        : operating-hours       : raspberrypi                              - disabled
+ system.adapter.pushsafer.0              : pushsafer             : raspberrypi                              -  enabled
  system.adapter.pvforecast.0             : pvforecast            : raspberrypi                              - disabled
  system.adapter.roborock.0               : roborock              : raspberrypi                              - disabled
  system.adapter.sayit.0                  : sayit                 : raspberrypi                              -  enabled
  system.adapter.schoolfree.0             : schoolfree            : raspberrypi                              -  enabled
+ system.adapter.simple-api.0             : simple-api            : raspberrypi                              -  enabled, port: 8087, bind: 0.0.0.0, run as: admin
+ system.adapter.smartgarden.0            : smartgarden           : raspberrypi                              -  enabled
+ system.adapter.sonos.0                  : sonos                 : raspberrypi                              -  enabled
+ system.adapter.statistics.0             : statistics            : raspberrypi                              -  enabled
+ system.adapter.tr-064.0                 : tr-064                : raspberrypi                              -  enabled
  system.adapter.weatherunderground.0     : weatherunderground    : raspberrypi                              -  enabled
+ system.adapter.web.0                    : web                   : raspberrypi                              -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.yahka.0                  : yahka                 : raspberrypi                              -  enabled
+ system.adapter.zigbee.0                 : zigbee                : raspberrypi                              -  enabled, port: /dev/serial/by-id/usb-Itead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_V2_7a6336835bf3ef119b6dbb1b6d9880ab-if00-port0

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.simple-api.0             : simple-api            : raspberrypi                              -  enabled, port: 8087, bind: 0.0.0.0, run as: admin
+ system.adapter.web.0                    : web                   : raspberrypi                              -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.zigbee.0                 : zigbee                : raspberrypi                              -  enabled, port: /dev/serial/by-id/usb-Itead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_V2_7a6336835bf3ef119b6dbb1b6d9880ab-if00-port0

ioBroker-Repositories
┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐
│ (index) │ name     │ url                                                     │ auto upgrade │
├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤
│ 0       │ 'stable' │ 'http://download.iobroker.net/sources-dist.json'        │ true         │
│ 1       │ 'beta'   │ 'http://download.iobroker.net/sources-dist-latest.json' │ false        │
└─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘

Active repo(s): stable
Upgrade policy: minor

Installed ioBroker-Adapters
Used repository: stable
Adapter    "admin"        : 7.7.2    , installed 7.7.2
Adapter    "alias-manager": 2.0.0    , installed 2.0.0
Adapter    "backitup"     : 3.3.5    , installed 3.3.5
Adapter    "devices"      : 1.2.8    , installed 1.2.8
Adapter    "discovery"    : 5.0.0    , installed 5.0.0
Adapter    "doorbird"     : 3.0.0    , installed 3.0.0
Adapter    "dwd"          : 2.8.5    , installed 2.8.5
Adapter    "email"        : 2.0.4    , installed 2.0.4
Adapter    "feiertage"    : 1.2.1    , installed 1.2.1
Adapter    "flot"         : 1.12.0   , installed 1.12.0
Adapter    "followthesun" : 0.5.2    , installed 0.5.2
Adapter    "fronius"      : 2.1.1    , installed 2.1.1
Adapter    "go-e"         : 1.0.41   , installed 1.0.41
Adapter    "history"      : 3.0.1    , installed 3.0.1
Adapter    "ical"         : 1.17.0   , installed 1.17.0
Adapter    "javascript"   : 8.9.2    , installed 8.9.2
Controller "js-controller": 7.0.7    , installed 7.0.7
Adapter    "matter"       : 0.5.5    , installed 0.5.5
Adapter    "modbus"       : 6.3.2    , installed 6.3.2
Adapter    "netatmo"      : 3.1.0    , installed 3.1.0
Adapter    "openknx"      : 0.9.0    , installed 0.9.0
Adapter    "operating-hours": 1.3.0  , installed 1.3.0
Adapter    "pushsafer"    : 1.1.0    , installed 1.1.0
Adapter    "pvforecast"   : 5.0.0    , installed 5.0.0
Adapter    "roborock"     : 0.6.18   , installed 0.6.18
Adapter    "sayit"        : 5.0.0    , installed 5.0.0
Adapter    "schoolfree"   : 1.1.12   , installed 1.1.12
Adapter    "simple-api"   : 2.8.0    , installed 2.8.0
Adapter    "smartgarden"  : 2.0.1    , installed 2.0.1
Adapter    "socketio"     : 6.7.1    , installed 6.7.1
Adapter    "sonos"        : 3.0.0    , installed 3.0.0
Adapter    "statistics"   : 2.4.0    , installed 2.4.0
Adapter    "tr-064"       : 4.3.0    , installed 4.3.0
Adapter    "weatherunderground": 3.7.0, installed 3.7.0
Adapter    "web"          : 7.0.8    , installed 7.0.8
Adapter    "ws"           : 2.6.2    , installed 2.6.2
Adapter    "yahka"        : 1.1.5    , installed 1.1.5
Adapter    "zigbee"       : 3.1.5    , installed 3.1.5

Objects and States
Please stand by - This may take a while
Objects:        6967
States:         5721

*** OS-Repositories and Updates ***
Hit:1 http://deb.debian.org/debian bookworm InRelease
Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease
Hit:3 http://deb.debian.org/debian bookworm-updates InRelease
Hit:4 http://archive.raspberrypi.com/debian bookworm InRelease
Hit:5 https://deb.nodesource.com/node_22.x nodistro InRelease
Reading package lists...
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name  
tcp        0      0 127.0.0.1:45649         0.0.0.0:*               LISTEN      1001       83667      38354/io.yahka.0  
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       83258      38026/iobroker.js-c
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       82405      38026/iobroker.js-c
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          73227      30450/sshd: /usr/sb
tcp        0      0 192.168.10.13:8100      0.0.0.0:*               LISTEN      1001       83671      38395/io.doorbird.0
tcp6       0      0 :::8087                 :::*                    LISTEN      1001       85385      38455/io.simple-api
tcp6       0      0 :::8082                 :::*                    LISTEN      1001       86134      38500/io.web.0    
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       79792      38048/io.admin.0  
tcp6       0      0 :::3500                 :::*                    LISTEN      1001       84206      38298/io.sonos.0  
tcp6       0      0 :::22                   :::*                    LISTEN      0          73229      30450/sshd: /usr/sb
tcp6       0      0 :::40033                :::*                    LISTEN      1001       83666      38354/io.yahka.0  
udp        0      0 0.0.0.0:53381           0.0.0.0:*                           104        6399       456/avahi-daemon: r
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           104        6397       456/avahi-daemon: r
udp        0      0 0.0.0.0:41727           0.0.0.0:*                           1001       82677      38267/io.openknx.0
udp6       0      0 :::5353                 :::*                                104        6398       456/avahi-daemon: r
udp6       0      0 fe80::83ef:c731:b6f:546 :::*                                0          6487       533/NetworkManager
udp6       0      0 :::50840                :::*                                104        6400       456/avahi-daemon: r

*** Log File - Last 25 Lines ***

2025-10-23 13:25:07.973  - info: host.raspberrypi stopInstance system.adapter.sayit.0 (force=false, process=true)
2025-10-23 13:25:07.994  - info: sayit.0 (89581) stopping...
2025-10-23 13:25:08.501  - info: sayit.0 (89581) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2025-10-23 13:25:08.974  - info: host.raspberrypi stopInstance timeout 1000 system.adapter.sayit.0 killing pid 89581
2025-10-23 13:25:09.037  - warn: host.raspberrypi instance system.adapter.sayit.0 terminated due to SIGKILL
2025-10-23 13:25:09.037  - info: host.raspberrypi instance system.adapter.sayit.0 terminated with code null ()
2025-10-23 13:25:09.716  - info: host.raspberrypi instance system.adapter.sayit.0 in version "5.0.0" started with pid 89939
2025-10-23 13:25:13.597  - info: sayit.0 (89939) starting. Version 5.0.0 in /opt/iobroker/node_modules/iobroker.sayit, node: v22.21.0, js-controller: 7.0.7
2025-10-23 13:25:13.736  - info: sayit.0 (89939) Upload announce mp3 files
2025-10-23 13:25:13.772  - info: host.raspberrypi stopInstance system.adapter.sayit.0 (force=false, process=true)
2025-10-23 13:25:13.794  - info: sayit.0 (89939) stopping...
2025-10-23 13:25:14.300  - info: sayit.0 (89939) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2025-10-23 13:25:14.775  - info: host.raspberrypi stopInstance timeout 1000 system.adapter.sayit.0 killing pid 89939
2025-10-23 13:25:14.837  - warn: host.raspberrypi instance system.adapter.sayit.0 terminated due to SIGKILL
2025-10-23 13:25:14.837  - info: host.raspberrypi instance system.adapter.sayit.0 terminated with code null ()
2025-10-23 13:25:15.947  - info: host.raspberrypi instance system.adapter.sayit.0 in version "5.0.0" started with pid 89989
2025-10-23 13:25:21.223  - info: sayit.0 (89989) starting. Version 5.0.0 in /opt/iobroker/node_modules/iobroker.sayit, node: v22.21.0, js-controller: 7.0.7
2025-10-23 13:25:21.392  - info: sayit.0 (89989) Upload announce mp3 files
2025-10-23 13:25:21.443  - info: host.raspberrypi stopInstance system.adapter.sayit.0 (force=false, process=true)
2025-10-23 13:25:21.452  - info: sayit.0 (89989) stopping...
2025-10-23 13:25:21.958  - info: sayit.0 (89989) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2025-10-23 13:25:22.445  - info: host.raspberrypi stopInstance timeout 1000 system.adapter.sayit.0 killing pid 89989
2025-10-23 13:25:22.514  - warn: host.raspberrypi instance system.adapter.sayit.0 terminated due to SIGKILL
2025-10-23 13:25:22.516  - info: host.raspberrypi instance system.adapter.sayit.0 terminated with code null ()
2025-10-23 13:25:23.120  - info: host.raspberrypi instance system.adapter.sayit.0 in version "5.0.0" started with pid 90378

Was bedeutet eigentlich?
Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting:
/dev/serial/by-id/usb-Itead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_V2_7a6336835bf3ef119b6dbb1b6d9880ab-if00-port0

Ich kann übrigens immer noch kein COM-Anschlussname auswählen, sondern muss das aus dem Diag reinkopieren.

MartinP

@sascha-0

Im "by-id" verzeichnis scheint es laut Diag Output ein zweites USB Device zu geben. Falls das nicht die Debug-Schnittstelle des Zigbee-Sticks ist, vielleicht mal entfernen / abziehen...

Ansonsten vielleicht die Ausgabe von

frigate@ubuntu-frigate-privileged:/media/frigate/recordings$ ls -l /dev/serial/by-id
total 0
lrwxrwxrwx 1 root root 13 Sep 17 10:17 usb-dresden_elektronik_ConBee_III_DE03189531-if00-port0 -> ../../ttyUSB0
lrwxrwxrwx 1 root root 13 Oct  6 18:49 usb-WEMOS.CC_LOLIN-S2-MINI_0-if00 -> ../../ttyACM0
frigate@ubuntu-frigate-privileged:/media/frigate/recordings$

Sascha 0

@martinp said in Zigbee Adaper läuft nicht:

@sascha-0

Im "by-id" verzeichnis scheint es laut Diag Output ein zweites USB Device zu geben. Falls das nicht die Debug-Schnittstelle des Zigbee-Sticks ist, vielleicht mal entfernen / abziehen...

Ansonsten vielleicht die Ausgabe von
frigate@ubuntu-frigate-privileged:/media/frigate/recordings$ ls -l /dev/serial/by-id
total 0
lrwxrwxrwx 1 root root 13 Sep 17 10:17 usb-dresden_elektronik_ConBee_III_DE03189531-if00-port0 -> ../../ttyUSB0
lrwxrwxrwx 1 root root 13 Oct  6 18:49 usb-WEMOS.CC_LOLIN-S2-MINI_0-if00 -> ../../ttyACM0
frigate@ubuntu-frigate-privileged:/media/frigate/recordings$ 

Wie mache ich das?

MartinP

@sascha-0

Steht in der ersten Zeile

In der Kommandozeile eingeben ...

ls -l /dev/serial/by-id

Sascha 0

@martinp said in Zigbee Adaper läuft nicht:

@sascha-0

Steht in der ersten Zeile

In der Kommandozeile eingeben ...
ls -l /dev/serial/by-id

Da kommt folgendes:

admin@raspberrypi:~ $ ls -l /dev/serial/by-id
total 0
lrwxrwxrwx 1 root root 13 Oct 23 07:43 usb-1a86_USB2.0-Ser_-if00-port0 -> ../../ttyUSB0
lrwxrwxrwx 1 root root 13 Oct 23 13:18 usb-Itead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_V2_7a6336835bf3ef119b6dbb1b6d9880ab-if00-port0 -> ../../ttyUSB1
admin@raspberrypi:~ $

Thomas Braun

@sascha-0

Merkwürdig.
Gib mal das Link-Target direkt in den Einstellungen ein.
Also

/dev/ttyUSB0

bzw.

/dev/ttyUSB1

Asgothian

@thomas-braun sagte in Zigbee Adaper läuft nicht:

@sascha-0

Merkwürdig.
Gib mal das Link-Target direkt in den Einstellungen ein.
Also
/dev/ttyUSB0
bzw.
/dev/ttyUSB1

Definitiv /dev/ttuUSB1. Unter /dev/ttyUSB0 ist die Firmware nicht erreichbar !

Die Meldung

error: zigbee.0 (38369) Starting zigbee-herdsman problem : Failed to connect to the adapter (Error: SRSP - SYS - ping after 6000ms)

bedeutet das der Adapter die serielle Schnittstelle zwar geöffnet bekommt, nicht aber per Seriellen Befehlen mit der Firmware sprechen kann.

@sascha-0 Ich hab da mal ein paar Fragen:

Hast du den Stick auf dem Rechner mit Firmware versorgt auf dem du den jetzt auch nutzt ?
Hast du andere Geräte an anderen USB Ports angeschlossen (wenn ja, welche) (Ziel: NEIN - insbesondere keine SSD / USB3 HDD)
Hast du eine USB Verlängerung für den Stick benutzt ? (Ziel: JA)

A.

Sascha 0

@thomas-braun said in Zigbee Adaper läuft nicht:

l das

Leider mit dem gleichen Ergebnis:

overriding zigbee options with:
extPanID : a019c6b597d65071
panID : 8820
channel : 15
port : /dev/ttyUSB1
adapterType : zstack
baudRate : 115200
precfgkey : 01030507090B0D0F00020406080A0C0D
flowCTRL : false
Starting Adapter npm ...
Installed Version: iobroker.zigbee@3.1.5 (Converters 25.31.0 Herdsman 6.3.1)
Starting zigbee-herdsman...
Unable to obtain herdsman settings
Starting zigbee-herdsman problem : Failed to connect to the adapter (Error: SRSP - SYS - ping after 6000ms)
Failed to start Zigbee: no message given

NEWS

Zigbee Adaper läuft nicht

Support us

971
Online

32.3k
Users

81.0k
Topics

1.3m
Posts

NEWS

Zigbee Adaper läuft nicht

Support us

971Online

32.3kUsers

81.0kTopics

1.3mPosts

971
Online

32.3k
Users

81.0k
Topics

1.3m
Posts