Adapter zur Steuerung von Projektoren (PJLink / PJLinkV2)

mpenno

Hallo zusammen,

ich würde mich auch freuen, wenn der Adapter noch einmal für Admin 5 und dem aktuellem js-controller angepasst werden könnte.
Zum einen kommen sehr viele Meldungen (wie bei anderen Adaptern auch):

2021-11-30 17:57:42.832 - info: pjlink.0 (22823) changed power to 1 3feae094
2021-11-30 17:57:42.834 - info: pjlink.0 (22823) State value to set for "pjlink.0.power" has to be type "number" but received type "string"
2021-11-30 17:57:52.830 - info: pjlink.0 (22823) State value to set for "pjlink.0.power" has to be type "number" but received type "string"
2021-11-30 17:57:52.835 - info: pjlink.0 (22823) changed power to 1 6840a85e
2021-11-30 17:57:52.837 - info: pjlink.0 (22823) State value to set for "pjlink.0.power" has to be type "number" but received type "string"

Der Kontakt zum Epson Beamer mit Benutzer+Passwort ging sofort, allerdings sind die Objekt-Werte bei mir noch codiert:

Ist es bei Euch auch so?
VG Michael

oberstel

@mpenno Ich habe den Adapter komplett neu gebaut > "PJLinkV2".
Werde ihn die Tage mal auf GutHub stellen und gebe dann hier bescheid.

oberstel

So, ich war dann mal etwas aktiv und habe auf GitHub eine neue Version (2.1.0) hochgeladen... wie angekündigt, gibt es jetzt die zweite Evolution des Adapters (V2), im neuen Adapter Design, mit besseren Error Handling, angepasst an Admin5 usw.

Bitte entfernt die alte Version (PJLink) manuell, falls vorhanden!

PJLinkV2: https://github.com/oberstel/ioBroker.PJLinkV2.git

Einige Sachen funktionieren noch nicht so dolle, ist alles im readme.md beschrieben.

Feedback zu dem Adapter gerne hier im Forum...

oberstel

@kev0 dieses Verhalten sollte mit der aktuellen Version nicht mehr vorkommen. Es wird jetzt immer erst geprüft ob das Gerät überhaupt da ist... bitte probiere das mal aus.

oberstel

@hansmeier Ich weiß, Dein Post ist schon etwas älter... sorry das ich erst jetzt antworte.

Bist Du dir sicher, dass der Projektor PJLink sprechen kann? Ich habe mal eben im Handbuch nachgeschaut und finde da nix zu PJLink (auch PJ Talk habe ich dort nicht gefunden).

mpenno

@oberstel
Hallo und vielen Dank.
Ich habe es gerade mal getestet.
Ich habe den alten Adapter gelöscht und neuinstalliert. Er startete gut und konnte auch gleich ein paar Werte auslesen:

(Nur zur Info, mein Beamer ist noch im Standby. Die Einstellung, dass eine Kommunikation im Standby Modus möglich sein soll, habe ich letztens im Beamer-Menü gemacht.)

Leider kam dann die Fehlermeldung:

Im Log steht was, dass mein Epson Beamer nicht "Class 2" unterstützen würde. Laut Anleitung schon:

Hier einmal das Log:

2021-12-10 18:05:13.540 - info: host.iobroker iobroker del pjlink
2021-12-10 18:05:14.928 - info: smartmeter.0 (535) Received 7 values, 3 updated
2021-12-10 18:05:15.345 - info: host.iobroker iobroker Delete adapter "pjlink"
2021-12-10 18:05:15.381 - info: host.iobroker iobroker host.iobroker Counted 1 meta of pjlink
2021-12-10 18:05:15.387 - info: host.iobroker iobroker host.iobroker Counted 1 adapter for pjlink
2021-12-10 18:05:15.526 - info: host.iobroker iobroker host.iobroker Counted 2 states (system.adapter.pjlink.*) from states
2021-12-10 18:05:16.635 - info: host.iobroker iobroker host.iobroker file pjlink.admin deleted
2021-12-10 18:05:16.642 - info: host.iobroker iobroker host.iobroker object pjlink deleted
2021-12-10 18:05:16.652 - info: host.iobroker iobroker host.iobroker object pjlink.admin deletedhost.iobroker Deleting 2 object(s).
2021-12-10 18:05:16.730 - info: host.iobroker iobroker host.iobroker Deleting 2 state(s).
2021-12-10 18:05:16.745 - info: host.iobroker iobroker npm uninstall iobroker.pjlink --loglevel error --prefix "/opt/iobroker" (System call)
2021-12-10 18:06:31.607 - info: host.iobroker iobroker exit 0
2021-12-10 18:09:06.075 - info: host.iobroker iobroker url https://github.com/oberstel/ioBroker.PJLinkV2.git --host iobroker
2021-12-10 18:09:08.479 - info: host.iobroker iobroker install oberstel/ioBroker.PJLinkV2#49885907c804e024cbe1f5788ec18eee2cd0c36c
2021-12-10 18:09:08.969 - info: host.iobroker iobroker NPM version: 6.14.15
2021-12-10 18:09:08.971 - info: host.iobroker iobroker npm install oberstel/ioBroker.PJLinkV2#49885907c804e024cbe1f5788ec18eee2cd0c36c --loglevel error --prefix "/opt/iobroker" (System call)
2021-12-10 18:10:11.940 - error: host.iobroker iobroker host.iobroker Cannot install oberstel/ioBroker.PJLinkV2#49885907c804e024cbe1f5788ec18eee2cd0c36c: 0
2021-12-10 18:10:12.958 - info: host.iobroker iobroker exit 25
2021-12-10 18:10:16.620 - info: smartmeter.0 (535) Received 7 values, 3 updated
2021-12-10 18:10:33.672 - info: knx.0 (636) Value received on unknown GA : 10/0/21
2021-12-10 18:10:55.551 - info: host.iobroker Updating repository "stable" under "http://download.iobroker.net/sources-dist.json"
2021-12-10 18:11:15.000 - info: host.iobroker iobroker add pjlinkv2 --host iobroker
2021-12-10 18:11:16.912 - info: host.iobroker iobroker host.iobroker install adapter pjlinkv2
2021-12-10 18:11:16.918 - info: host.iobroker iobroker npm install --loglevel error --production (System call1) in "/opt/iobroker/node_modules/iobroker.pjlinkv2"
2021-12-10 18:11:43.412 - info: host.iobroker iobroker upload [4] pjlinkv2.admin /opt/iobroker/node_modules/iobroker.pjlinkv2/admin/words.js words.js application/javascript
2021-12-10 18:11:43.509 - info: host.iobroker iobroker upload [3] pjlinkv2.admin /opt/iobroker/node_modules/iobroker.pjlinkv2/admin/style.css style.css text/css
2021-12-10 18:11:43.570 - info: host.iobroker iobroker upload [2] pjlinkv2.admin /opt/iobroker/node_modules/iobroker.pjlinkv2/admin/pjlink.png pjlink.png image/png
2021-12-10 18:11:43.631 - info: host.iobroker iobroker upload [1] pjlinkv2.admin /opt/iobroker/node_modules/iobroker.pjlinkv2/admin/index_m.html index_m.html text/html
2021-12-10 18:11:43.690 - info: host.iobroker iobroker upload [0] pjlinkv2.admin /opt/iobroker/node_modules/iobroker.pjlinkv2/admin/custom_m.html custom_m.html text/html
2021-12-10 18:11:43.837 - info: host.iobroker iobroker host.iobroker object system.adapter.pjlinkv2 created/updated
2021-12-10 18:11:43.893 - info: host.iobroker iobroker host.iobroker create instance pjlinkv2
2021-12-10 18:11:43.907 - info: host.iobroker iobroker host.iobroker object system.adapter.pjlinkv2.0.logLevel created
2021-12-10 18:11:43.939 - info: host.iobroker iobroker host.iobroker object system.adapter.pjlinkv2.0.sigKill created
2021-12-10 18:11:43.972 - info: host.iobroker iobroker host.iobroker object system.adapter.pjlinkv2.0.eventLoopLag created
2021-12-10 18:11:44.004 - info: host.iobroker iobroker host.iobroker object system.adapter.pjlinkv2.0.outputCount created
2021-12-10 18:11:44.037 - info: host.iobroker iobroker host.iobroker object system.adapter.pjlinkv2.0.inputCount created
2021-12-10 18:11:44.070 - info: host.iobroker iobroker host.iobroker object system.adapter.pjlinkv2.0.uptime created
2021-12-10 18:11:44.103 - info: host.iobroker iobroker host.iobroker object system.adapter.pjlinkv2.0.memRss created
2021-12-10 18:11:44.135 - info: host.iobroker iobroker host.iobroker object system.adapter.pjlinkv2.0.memHeapTotal created
2021-12-10 18:11:44.168 - info: host.iobroker iobroker host.iobroker object system.adapter.pjlinkv2.0.memHeapUsed created
2021-12-10 18:11:44.204 - info: host.iobroker iobroker host.iobroker object system.adapter.pjlinkv2.0.cputime created
2021-12-10 18:11:44.235 - info: host.iobroker iobroker host.iobroker object system.adapter.pjlinkv2.0.cpu created
2021-12-10 18:11:44.269 - info: host.iobroker iobroker host.iobroker object system.adapter.pjlinkv2.0.compactMode created
2021-12-10 18:11:44.301 - info: host.iobroker iobroker host.iobroker object system.adapter.pjlinkv2.0.connected created
2021-12-10 18:11:44.333 - info: host.iobroker iobroker host.iobroker object system.adapter.pjlinkv2.0.alive created
2021-12-10 18:11:44.373 - info: host.iobroker iobroker host.iobroker object system.adapter.pjlinkv2.0 created
2021-12-10 18:11:45.428 - info: host.iobroker iobroker exit 0
2021-12-10 18:11:47.499 - info: host.iobroker instance system.adapter.pjlinkv2.0 started with pid 986
2021-12-10 18:11:50.168 - info: pjlinkv2.0 (986) starting. Version 2.1.1 in /opt/iobroker/node_modules/iobroker.pjlinkv2, node: v12.22.6, js-controller: 3.3.21
2021-12-10 18:11:50.194 - info: pjlinkv2.0 (986) Starting PJLink V2 Adapter...
2021-12-10 18:12:42.518 - info: host.iobroker stopInstance system.adapter.pjlinkv2.0 (force=false, process=true)
2021-12-10 18:12:42.530 - info: pjlinkv2.0 (986) Got terminate signal TERMINATE_YOURSELF
2021-12-10 18:12:42.532 - info: pjlinkv2.0 (986) terminating
2021-12-10 18:12:42.533 - info: pjlinkv2.0 (986) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2021-12-10 18:12:42.566 - info: host.iobroker stopInstance system.adapter.pjlinkv2.0 send kill signal
2021-12-10 18:12:43.120 - info: host.iobroker instance system.adapter.pjlinkv2.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2021-12-10 18:12:45.645 - info: host.iobroker instance system.adapter.pjlinkv2.0 started with pid 1050
2021-12-10 18:12:47.068 - info: pjlinkv2.0 (1050) starting. Version 2.1.1 in /opt/iobroker/node_modules/iobroker.pjlinkv2, node: v12.22.6, js-controller: 3.3.21
2021-12-10 18:12:47.095 - info: pjlinkv2.0 (1050) Starting PJLink V2 Adapter...
2021-12-10 18:12:47.096 - info: pjlinkv2.0 (1050) Trying to connect to:10.0.0.44 on port:4352
2021-12-10 18:12:47.324 - warn: pjlinkv2.0 (1050) PJLink Class2 ist configured, but device supports Class1 55977a50. Consider changing your config.
2021-12-10 18:12:52.328 - error: pjlinkv2.0 (1050) uncaught exception: Cannot read property 'log' of undefined
2021-12-10 18:12:52.329 - error: pjlinkv2.0 (1050) TypeError: Cannot read property 'log' of undefined
at translateErrorState (/opt/iobroker/node_modules/iobroker.pjlinkv2/main.js:539:14)
at /opt/iobroker/node_modules/iobroker.pjlinkv2/main.js:326:64
at Socket. (/opt/iobroker/node_modules/iobroker.pjlinkv2/lib/pjlink.js:59:8)
at Socket.emit (events.js:314:20)
at addChunk (_stream_readable.js:297:12)
at readableAddChunk (_stream_readable.js:272:9)
at Socket.Readable.push (_stream_readable.js:213:10)
at TCP.onStreamRead (internal/stream_base_commons.js:188:23)
2021-12-10 18:12:52.330 - error: pjlinkv2.0 (1050) Cannot read property 'log' of undefined
2021-12-10 18:12:52.335 - info: pjlinkv2.0 (1050) terminating
2021-12-10 18:12:52.338 - warn: pjlinkv2.0 (1050) Terminated (UNCAUGHT_EXCEPTION): Without reason
2021-12-10 18:12:52.912 - error: host.iobroker instance system.adapter.pjlinkv2.0 terminated with code 6 (UNCAUGHT_EXCEPTION)
2021-12-10 18:12:52.914 - info: host.iobroker Restart adapter system.adapter.pjlinkv2.0 because enabled
2021-12-10 18:13:22.934 - info: host.iobroker instance system.adapter.pjlinkv2.0 started with pid 1091
2021-12-10 18:13:24.430 - info: pjlinkv2.0 (1091) starting. Version 2.1.1 in /opt/iobroker/node_modules/iobroker.pjlinkv2, node: v12.22.6, js-controller: 3.3.21
2021-12-10 18:13:24.456 - info: pjlinkv2.0 (1091) Starting PJLink V2 Adapter...
2021-12-10 18:13:24.457 - info: pjlinkv2.0 (1091) Trying to connect to:10.0.0.44 on port:4352
2021-12-10 18:13:24.586 - warn: pjlinkv2.0 (1091) PJLink Class2 ist configured, but device supports Class1 697d3f42. Consider changing your config.
2021-12-10 18:13:29.589 - error: pjlinkv2.0 (1091) uncaught exception: Cannot read property 'log' of undefined
2021-12-10 18:13:29.591 - error: pjlinkv2.0 (1091) TypeError: Cannot read property 'log' of undefined
at translateErrorState (/opt/iobroker/node_modules/iobroker.pjlinkv2/main.js:539:14)
at /opt/iobroker/node_modules/iobroker.pjlinkv2/main.js:326:64
at Socket. (/opt/iobroker/node_modules/iobroker.pjlinkv2/lib/pjlink.js:59:8)
at Socket.emit (events.js:314:20)
at addChunk (_stream_readable.js:297:12)
at readableAddChunk (_stream_readable.js:272:9)
at Socket.Readable.push (_stream_readable.js:213:10)
at TCP.onStreamRead (internal/stream_base_commons.js:188:23)
2021-12-10 18:13:29.592 - error: pjlinkv2.0 (1091) Cannot read property 'log' of undefined
2021-12-10 18:13:29.601 - info: pjlinkv2.0 (1091) terminating
2021-12-10 18:13:29.603 - warn: pjlinkv2.0 (1091) Terminated (UNCAUGHT_EXCEPTION): Without reason
2021-12-10 18:13:30.167 - error: host.iobroker instance system.adapter.pjlinkv2.0 terminated with code 6 (UNCAUGHT_EXCEPTION)
2021-12-10 18:13:30.168 - info: host.iobroker Restart adapter system.adapter.pjlinkv2.0 because enabled
2021-12-10 18:14:00.261 - info: host.iobroker instance system.adapter.pjlinkv2.0 started with pid 1142
2021-12-10 18:14:01.603 - info: pjlinkv2.0 (1142) starting. Version 2.1.1 in /opt/iobroker/node_modules/iobroker.pjlinkv2, node: v12.22.6, js-controller: 3.3.21
2021-12-10 18:14:01.632 - info: pjlinkv2.0 (1142) Starting PJLink V2 Adapter...
2021-12-10 18:14:01.633 - info: pjlinkv2.0 (1142) Trying to connect to:10.0.0.44 on port:4352
2021-12-10 18:14:01.710 - warn: pjlinkv2.0 (1142) PJLink Class2 ist configured, but device supports Class1 69d17afa. Consider changing your config.
2021-12-10 18:14:06.713 - error: pjlinkv2.0 (1142) uncaught exception: Cannot read property 'log' of undefined
2021-12-10 18:14:06.715 - error: pjlinkv2.0 (1142) TypeError: Cannot read property 'log' of undefined
at translateErrorState (/opt/iobroker/node_modules/iobroker.pjlinkv2/main.js:539:14)
at /opt/iobroker/node_modules/iobroker.pjlinkv2/main.js:326:64
at Socket. (/opt/iobroker/node_modules/iobroker.pjlinkv2/lib/pjlink.js:59:8)
at Socket.emit (events.js:314:20)
at addChunk (_stream_readable.js:297:12)
at readableAddChunk (_stream_readable.js:272:9)
at Socket.Readable.push (_stream_readable.js:213:10)
at TCP.onStreamRead (internal/stream_base_commons.js:188:23)
2021-12-10 18:14:06.716 - error: pjlinkv2.0 (1142) Cannot read property 'log' of undefined
2021-12-10 18:14:06.721 - info: pjlinkv2.0 (1142) terminating
2021-12-10 18:14:06.722 - warn: pjlinkv2.0 (1142) Terminated (UNCAUGHT_EXCEPTION): Without reason
2021-12-10 18:14:07.288 - error: host.iobroker instance system.adapter.pjlinkv2.0 terminated with code 6 (UNCAUGHT_EXCEPTION)
2021-12-10 18:14:07.289 - info: host.iobroker Restart adapter system.adapter.pjlinkv2.0 because enabled
2021-12-10 18:14:07.289 - warn: host.iobroker Do not restart adapter system.adapter.pjlinkv2.0 because restart loop detected
2021-12-10 18:15:17.668 - info: smartmeter.0 (535) Received 7 values, 3 updated

Achja und stimmt. Bei der Installation des Adapters kommt der Error code 25.

Gerne probiere ich was, wenn Du magst.
(Ich gehe schon mal zum Beamer und schalte ihn an, vielleicht ändert sich was)
Viele Grüße
Michael

mpenno

Nachtrag:
Ich habe den Beamer angeschaltet, änderte aber nichts am Verhalten.
Dann habe ich beim Adapter auf "Class 1" gestellt. Der Adapter ist dann auch wieder abgestürzt und brachte folgende Fehlermeldungen:

2021-12-10 18:20:19.525 - info: smartmeter.0 (535) Received 7 values, 3 updated
2021-12-10 18:25:21.473 - info: smartmeter.0 (535) Received 7 values, 3 updated
2021-12-10 18:25:33.528 - info: knx.0 (636) Value received on unknown GA : 10/0/21
2021-12-10 18:30:22.617 - info: smartmeter.0 (535) Received 7 values, 3 updated
2021-12-10 18:32:52.738 - info: host.iobroker instance system.adapter.pjlinkv2.0 started with pid 2079
2021-12-10 18:32:54.183 - info: pjlinkv2.0 (2079) starting. Version 2.1.1 in /opt/iobroker/node_modules/iobroker.pjlinkv2, node: v12.22.6, js-controller: 3.3.21
2021-12-10 18:32:54.213 - info: pjlinkv2.0 (2079) Starting PJLink V2 Adapter...
2021-12-10 18:32:54.214 - info: pjlinkv2.0 (2079) Trying to connect to:10.0.0.44 on port:4352
2021-12-10 18:32:54.364 - warn: pjlinkv2.0 (2079) PJLink Class2 ist configured, but device supports Class1 19af035a. Consider changing your config.
2021-12-10 18:32:59.368 - error: pjlinkv2.0 (2079) uncaught exception: Cannot read property 'log' of undefined
2021-12-10 18:32:59.370 - error: pjlinkv2.0 (2079) TypeError: Cannot read property 'log' of undefined
at translateErrorState (/opt/iobroker/node_modules/iobroker.pjlinkv2/main.js:539:14)
at /opt/iobroker/node_modules/iobroker.pjlinkv2/main.js:326:64
at Socket. (/opt/iobroker/node_modules/iobroker.pjlinkv2/lib/pjlink.js:59:8)
at Socket.emit (events.js:314:20)
at addChunk (_stream_readable.js:297:12)
at readableAddChunk (_stream_readable.js:272:9)
at Socket.Readable.push (_stream_readable.js:213:10)
at TCP.onStreamRead (internal/stream_base_commons.js:188:23)
2021-12-10 18:32:59.371 - error: pjlinkv2.0 (2079) Cannot read property 'log' of undefined
2021-12-10 18:32:59.438 - info: pjlinkv2.0 (2079) terminating
2021-12-10 18:32:59.440 - warn: pjlinkv2.0 (2079) Terminated (UNCAUGHT_EXCEPTION): Without reason
2021-12-10 18:33:00.009 - error: host.iobroker instance system.adapter.pjlinkv2.0 terminated with code 6 (UNCAUGHT_EXCEPTION)
2021-12-10 18:33:00.010 - info: host.iobroker Restart adapter system.adapter.pjlinkv2.0 because enabled
2021-12-10 18:33:30.030 - info: host.iobroker instance system.adapter.pjlinkv2.0 started with pid 2131
2021-12-10 18:33:31.494 - info: pjlinkv2.0 (2131) starting. Version 2.1.1 in /opt/iobroker/node_modules/iobroker.pjlinkv2, node: v12.22.6, js-controller: 3.3.21
2021-12-10 18:33:31.522 - info: pjlinkv2.0 (2131) Starting PJLink V2 Adapter...
2021-12-10 18:33:31.524 - info: pjlinkv2.0 (2131) Trying to connect to:10.0.0.44 on port:4352
2021-12-10 18:33:31.600 - warn: pjlinkv2.0 (2131) PJLink Class2 ist configured, but device supports Class1 72401745. Consider changing your config.
2021-12-10 18:33:36.604 - error: pjlinkv2.0 (2131) uncaught exception: Cannot read property 'log' of undefined
2021-12-10 18:33:36.605 - error: pjlinkv2.0 (2131) TypeError: Cannot read property 'log' of undefined
at translateErrorState (/opt/iobroker/node_modules/iobroker.pjlinkv2/main.js:539:14)
at /opt/iobroker/node_modules/iobroker.pjlinkv2/main.js:326:64
at Socket. (/opt/iobroker/node_modules/iobroker.pjlinkv2/lib/pjlink.js:59:8)
at Socket.emit (events.js:314:20)
at addChunk (_stream_readable.js:297:12)
at readableAddChunk (_stream_readable.js:272:9)
at Socket.Readable.push (_stream_readable.js:213:10)
at TCP.onStreamRead (internal/stream_base_commons.js:188:23)
2021-12-10 18:33:36.606 - error: pjlinkv2.0 (2131) Cannot read property 'log' of undefined
2021-12-10 18:33:36.612 - info: pjlinkv2.0 (2131) terminating
2021-12-10 18:33:36.613 - warn: pjlinkv2.0 (2131) Terminated (UNCAUGHT_EXCEPTION): Without reason
2021-12-10 18:33:37.177 - error: host.iobroker instance system.adapter.pjlinkv2.0 terminated with code 6 (UNCAUGHT_EXCEPTION)
2021-12-10 18:33:37.178 - info: host.iobroker Restart adapter system.adapter.pjlinkv2.0 because enabled
2021-12-10 18:34:07.202 - info: host.iobroker instance system.adapter.pjlinkv2.0 started with pid 2171
2021-12-10 18:34:08.584 - info: pjlinkv2.0 (2171) starting. Version 2.1.1 in /opt/iobroker/node_modules/iobroker.pjlinkv2, node: v12.22.6, js-controller: 3.3.21
2021-12-10 18:34:08.611 - info: pjlinkv2.0 (2171) Starting PJLink V2 Adapter...
2021-12-10 18:34:08.612 - info: pjlinkv2.0 (2171) Trying to connect to:10.0.0.44 on port:4352
2021-12-10 18:34:08.686 - warn: pjlinkv2.0 (2171) PJLink Class2 ist configured, but device supports Class1 5fbc2cf1. Consider changing your config.
2021-12-10 18:34:13.689 - error: pjlinkv2.0 (2171) uncaught exception: Cannot read property 'log' of undefined
2021-12-10 18:34:13.691 - error: pjlinkv2.0 (2171) TypeError: Cannot read property 'log' of undefined
at translateErrorState (/opt/iobroker/node_modules/iobroker.pjlinkv2/main.js:539:14)
at /opt/iobroker/node_modules/iobroker.pjlinkv2/main.js:326:64
at Socket. (/opt/iobroker/node_modules/iobroker.pjlinkv2/lib/pjlink.js:59:8)
at Socket.emit (events.js:314:20)
at addChunk (_stream_readable.js:297:12)
at readableAddChunk (_stream_readable.js:272:9)
at Socket.Readable.push (_stream_readable.js:213:10)
at TCP.onStreamRead (internal/stream_base_commons.js:188:23)
2021-12-10 18:34:13.692 - error: pjlinkv2.0 (2171) Cannot read property 'log' of undefined
2021-12-10 18:34:13.697 - info: pjlinkv2.0 (2171) terminating
2021-12-10 18:34:13.699 - warn: pjlinkv2.0 (2171) Terminated (UNCAUGHT_EXCEPTION): Without reason
2021-12-10 18:34:14.264 - error: host.iobroker instance system.adapter.pjlinkv2.0 terminated with code 6 (UNCAUGHT_EXCEPTION)
2021-12-10 18:34:14.266 - info: host.iobroker Restart adapter system.adapter.pjlinkv2.0 because enabled
2021-12-10 18:34:14.266 - warn: host.iobroker Do not restart adapter system.adapter.pjlinkv2.0 because restart loop detected
2021-12-10 18:34:40.520 - info: host.iobroker instance system.adapter.pjlinkv2.0 started with pid 2210
2021-12-10 18:34:41.921 - info: pjlinkv2.0 (2210) starting. Version 2.1.1 in /opt/iobroker/node_modules/iobroker.pjlinkv2, node: v12.22.6, js-controller: 3.3.21
2021-12-10 18:34:41.948 - info: pjlinkv2.0 (2210) Starting PJLink V2 Adapter...
2021-12-10 18:34:41.949 - info: pjlinkv2.0 (2210) Trying to connect to:10.0.0.44 on port:4352
2021-12-10 18:34:42.029 - warn: pjlinkv2.0 (2210) PJLink Class1 ist configured, but device supports Class1 128c20c3. Consider changing your config.
2021-12-10 18:34:47.033 - error: pjlinkv2.0 (2210) uncaught exception: Cannot read property 'log' of undefined
2021-12-10 18:34:47.034 - error: pjlinkv2.0 (2210) TypeError: Cannot read property 'log' of undefined
at translateErrorState (/opt/iobroker/node_modules/iobroker.pjlinkv2/main.js:539:14)
at /opt/iobroker/node_modules/iobroker.pjlinkv2/main.js:326:64
at Socket. (/opt/iobroker/node_modules/iobroker.pjlinkv2/lib/pjlink.js:59:8)
at Socket.emit (events.js:314:20)
at addChunk (_stream_readable.js:297:12)
at readableAddChunk (_stream_readable.js:272:9)
at Socket.Readable.push (_stream_readable.js:213:10)
at TCP.onStreamRead (internal/stream_base_commons.js:188:23)
2021-12-10 18:34:47.035 - error: pjlinkv2.0 (2210) Cannot read property 'log' of undefined
2021-12-10 18:34:47.040 - info: pjlinkv2.0 (2210) terminating
2021-12-10 18:34:47.042 - warn: pjlinkv2.0 (2210) Terminated (UNCAUGHT_EXCEPTION): Without reason
2021-12-10 18:34:47.612 - error: host.iobroker instance system.adapter.pjlinkv2.0 terminated with code 6 (UNCAUGHT_EXCEPTION)
2021-12-10 18:34:47.613 - info: host.iobroker Restart adapter system.adapter.pjlinkv2.0 because enabled
2021-12-10 18:35:17.635 - info: host.iobroker instance system.adapter.pjlinkv2.0 started with pid 2262
2021-12-10 18:35:19.023 - info: pjlinkv2.0 (2262) starting. Version 2.1.1 in /opt/iobroker/node_modules/iobroker.pjlinkv2, node: v12.22.6, js-controller: 3.3.21
2021-12-10 18:35:19.052 - info: pjlinkv2.0 (2262) Starting PJLink V2 Adapter...
2021-12-10 18:35:19.053 - info: pjlinkv2.0 (2262) Trying to connect to:10.0.0.44 on port:4352
2021-12-10 18:35:19.121 - warn: pjlinkv2.0 (2262) PJLink Class1 ist configured, but device supports Class1 2606895a. Consider changing your config.
2021-12-10 18:35:23.445 - info: smartmeter.0 (535) Received 7 values, 3 updated
2021-12-10 18:35:24.124 - error: pjlinkv2.0 (2262) uncaught exception: Cannot read property 'log' of undefined
2021-12-10 18:35:24.126 - error: pjlinkv2.0 (2262) TypeError: Cannot read property 'log' of undefined
at translateErrorState (/opt/iobroker/node_modules/iobroker.pjlinkv2/main.js:539:14)
at /opt/iobroker/node_modules/iobroker.pjlinkv2/main.js:326:64
at Socket. (/opt/iobroker/node_modules/iobroker.pjlinkv2/lib/pjlink.js:59:8)
at Socket.emit (events.js:314:20)
at addChunk (_stream_readable.js:297:12)
at readableAddChunk (_stream_readable.js:272:9)
at Socket.Readable.push (_stream_readable.js:213:10)
at TCP.onStreamRead (internal/stream_base_commons.js:188:23)
2021-12-10 18:35:24.127 - error: pjlinkv2.0 (2262) Cannot read property 'log' of undefined
2021-12-10 18:35:24.131 - info: pjlinkv2.0 (2262) terminating
2021-12-10 18:35:24.133 - warn: pjlinkv2.0 (2262) Terminated (UNCAUGHT_EXCEPTION): Without reason
2021-12-10 18:35:24.698 - error: host.iobroker instance system.adapter.pjlinkv2.0 terminated with code 6 (UNCAUGHT_EXCEPTION)
2021-12-10 18:35:24.699 - info: host.iobroker Restart adapter system.adapter.pjlinkv2.0 because enabled

oberstel

@mpenno sagte in Adapter zur Steuerung von Projektoren (PJLink / PJLinkV2):

18:34:08.686 - warn: pjlinkv2.0 (2171) PJLink Class2 ist configured, but device supports Class1 5fbc2cf1. Consider changing your config. 2021-12-10 18:34:13.689 - error: pjlinkv2.0 (2171) uncaught exception: Cannot read property 'log' of undefined

Laut Log hast Du anscheinend Class#2 in den Adapter Settings ausgewählt, allerdings kann der Adapter das noch gar nicht (habe ich noch nicht implementiert, da ich das nicht testen kann). Eigentlich sollte ein Class#2 kompatibler Projektor auch Class#1 unterstützen (abwärts kompatibel). Bitte probiere mal Class#1 auszuwählen und poste hier nochmal einen Auszug aus dem Log.

Wenn Du Lust hast, könntest Du mir bei der Implementierung der Class#2 Fähigkeiten etwas helfen... Ich würde gerne die entspr. Funktionen einbauen und es wäre klasse, wenn Du das dann testen könntest?

oberstel

@mpenno sagte in Adapter zur Steuerung von Projektoren (PJLink / PJLinkV2):

Achja und stimmt. Bei der Installation des Adapters kommt der Error code 25.

Das habe ich inzwischen gefixed. Mit der aktuellen Version 2.1.5 sollte der Fehler nicht mehr kommen.

mpenno

@oberstel Ja gerne mache ich mit.

Ich habe gerade einmal die aktuelle Version (2.1.5) von Github installiert. Vorher habe ich manuell die Instanz und die alte Adapter-Version gelöscht.
Der Error Code 25 kam leider trotzdem. Hätte ich noch den ioBroker neustarten sollen?

Hier mal die Zustände, die als "Class1" ausgelesen werden können:

Es aktualisiert sich nur der Error-Code. Da bin ich übrigens gespannt, ob da was dran ist, denn der Lüfter macht wirklich komische Geräusche. Aber ich bin der einzige in der Familie, dem es auffällt.

Die anderen Statis egal, ob ich an-/ausschalte oder den HDMI Eingang wechsel, ändern sich nicht.

2021-12-17 16:41:26.098 - info: host.iobroker iobroker del pjlinkv2.0
2021-12-17 16:41:31.808 - info: host.iobroker iobroker Delete adapter "pjlinkv2.0"
2021-12-17 16:41:31.825 - info: host.iobroker iobroker host.iobroker Counted 1 instances of pjlinkv2.0
2021-12-17 16:41:31.874 - info: host.iobroker iobroker host.iobroker Counted 23 states of pjlinkv2.0
2021-12-17 16:41:31.892 - info: host.iobroker iobroker host.iobroker Counted 14 states of system.adapter.pjlinkv2.0
2021-12-17 16:41:31.902 - info: host.iobroker iobroker host.iobroker Counted 16 states (io.pjlinkv2.0.*) from states
2021-12-17 16:41:31.920 - info: host.iobroker iobroker host.iobroker Counted 14 states (system.adapter.pjlinkv2.0.*) from states
2021-12-17 16:41:32.919 - info: host.iobroker iobroker host.iobroker Deleting 38 object(s).
2021-12-17 16:41:34.532 - info: host.iobroker object deleted system.adapter.pjlinkv2.0
2021-12-17 16:41:34.594 - info: host.iobroker iobroker host.iobroker Deleting 30 state(s).
2021-12-17 16:41:35.751 - info: host.iobroker iobroker exit 0
2021-12-17 16:41:52.784 - info: host.iobroker iobroker del pjlinkv2
2021-12-17 16:41:54.618 - info: host.iobroker iobroker Delete adapter "pjlinkv2"
2021-12-17 16:41:54.670 - info: host.iobroker iobroker host.iobroker Counted 1 meta of pjlinkv2
2021-12-17 16:41:54.677 - info: host.iobroker iobroker host.iobroker Counted 1 adapter for pjlinkv2
2021-12-17 16:41:55.937 - info: host.iobroker iobroker host.iobroker file pjlinkv2.admin deleted
2021-12-17 16:41:55.944 - info: host.iobroker iobroker host.iobroker object pjlinkv2 deleted
2021-12-17 16:41:55.952 - info: host.iobroker iobroker host.iobroker object pjlinkv2.admin deleted
2021-12-17 16:41:55.953 - info: host.iobroker iobroker host.iobroker Deleting 2 object(s).
2021-12-17 16:41:56.066 - info: host.iobroker iobroker npm uninstall iobroker.pjlinkv2 --loglevel error --prefix "/opt/iobroker" (System call)
2021-12-17 16:43:12.178 - info: host.iobroker iobroker exit 0
2021-12-17 16:43:44.727 - info: smartmeter.0 (535) Received 7 values, 3 update
2021-12-17 16:48:46.237 - info: smartmeter.0 (535) Received 7 values, 3 updated
2021-12-17 16:50:14.113 - info: host.iobroker iobroker url https://github.com/oberstel/ioBroker.PJLinkV2.git --host iobroker
2021-12-17 16:50:16.499 - info: host.iobroker iobroker install oberstel/ioBroker.PJLinkV2#229a72387901a2328ceb811a6d4ec5cb441dd2ef
2021-12-17 16:50:17.008 - info: host.iobroker iobroker NPM version: 6.14.15
2021-12-17 16:50:17.011 - info: host.iobroker iobroker npm install oberstel/ioBroker.PJLinkV2#229a72387901a2328ceb811a6d4ec5cb441dd2ef --loglevel error --prefix "/opt/iobroker" (System call)
2021-12-17 16:51:24.399 - error: host.iobroker iobroker host.iobroker Cannot install oberstel/ioBroker.PJLinkV2#229a72387901a2328ceb811a6d4ec5cb441dd2ef: 0
2021-12-17 16:51:25.424 - info: host.iobroker iobroker exit 25
2021-12-17 16:52:25.296 - info: host.iobroker Updating repository "stable" under "http://download.iobroker.net/sources-dist.json"
2021-12-17 16:52:46.025 - info: host.iobroker iobroker add pjlinkv2 auto --host iobroker
2021-12-17 16:52:47.975 - info: host.iobroker iobroker host.iobroker install adapter pjlinkv2
2021-12-17 16:52:47.980 - info: host.iobroker iobroker npm install --loglevel error --production (System call1) in "/opt/iobroker/node_modules/iobroker.pjlinkv2"
2021-12-17 16:53:17.102 - info: host.iobroker iobroker upload [4] pjlinkv2.admin /opt/iobroker/node_modules/iobroker.pjlinkv2/admin/words.js words.js application/javascript
2021-12-17 16:53:17.200 - info: host.iobroker iobroker upload [3] pjlinkv2.admin /opt/iobroker/node_modules/iobroker.pjlinkv2/admin/style.css style.css text/css
2021-12-17 16:53:17.289 - info: host.iobroker iobroker upload [2] pjlinkv2.admin /opt/iobroker/node_modules/iobroker.pjlinkv2/admin/pjlink.png pjlink.png image/png
2021-12-17 16:53:17.349 - info: host.iobroker iobroker upload [1] pjlinkv2.admin /opt/iobroker/node_modules/iobroker.pjlinkv2/admin/index_m.html index_m.html text/html
2021-12-17 16:53:17.406 - info: host.iobroker iobroker upload [0] pjlinkv2.admin /opt/iobroker/node_modules/iobroker.pjlinkv2/admin/custom_m.html custom_m.html text/html
2021-12-17 16:53:17.556 - info: host.iobroker iobroker host.iobroker object system.adapter.pjlinkv2 created/updated
2021-12-17 16:53:17.613 - info: host.iobroker iobroker host.iobroker create instance pjlinkv2
2021-12-17 16:53:17.628 - info: host.iobroker iobroker host.iobroker object system.adapter.pjlinkv2.0.logLevel created
2021-12-17 16:53:17.664 - info: host.iobroker iobroker host.iobroker object system.adapter.pjlinkv2.0.sigKill created
2021-12-17 16:53:17.695 - info: host.iobroker iobroker host.iobroker object system.adapter.pjlinkv2.0.eventLoopLag created
2021-12-17 16:53:17.727 - info: host.iobroker iobroker host.iobroker object system.adapter.pjlinkv2.0.outputCount created
2021-12-17 16:53:17.762 - info: host.iobroker iobroker host.iobroker object system.adapter.pjlinkv2.0.inputCount created
2021-12-17 16:53:17.795 - info: host.iobroker iobroker host.iobroker object system.adapter.pjlinkv2.0.uptime created
2021-12-17 16:53:17.827 - info: host.iobroker iobroker host.iobroker object system.adapter.pjlinkv2.0.memRss created
2021-12-17 16:53:17.863 - info: host.iobroker iobroker host.iobroker object system.adapter.pjlinkv2.0.memHeapTotal created
2021-12-17 16:53:17.896 - info: host.iobroker iobroker host.iobroker object system.adapter.pjlinkv2.0.memHeapUsed created
2021-12-17 16:53:17.932 - info: host.iobroker iobroker host.iobroker object system.adapter.pjlinkv2.0.cputime created
2021-12-17 16:53:17.968 - info: host.iobroker iobroker host.iobroker object system.adapter.pjlinkv2.0.cpu created
2021-12-17 16:53:17.999 - info: host.iobroker iobroker host.iobroker object system.adapter.pjlinkv2.0.compactMode created
2021-12-17 16:53:18.030 - info: host.iobroker iobroker host.iobroker object system.adapter.pjlinkv2.0.connected created
2021-12-17 16:53:18.061 - info: host.iobroker iobroker host.iobroker object system.adapter.pjlinkv2.0.alive created
2021-12-17 16:53:18.100 - info: host.iobroker iobroker host.iobroker object system.adapter.pjlinkv2.0 created
2021-12-17 16:53:19.160 - info: host.iobroker iobroker exit 0
2021-12-17 16:53:21.207 - info: host.iobroker instance system.adapter.pjlinkv2.0 started with pid 30938
2021-12-17 16:53:22.827 - info: pjlinkv2.0 (30938) starting. Version 2.1.5 in /opt/iobroker/node_modules/iobroker.pjlinkv2, node: v12.22.6, js-controller: 3.3.21
2021-12-17 16:53:22.857 - info: pjlinkv2.0 (30938) Starting PJLink V2 Adapter...
2021-12-17 16:53:47.043 - info: smartmeter.0 (535) Received 7 values, 3 updated
2021-12-17 16:53:55.091 - info: host.iobroker stopInstance system.adapter.pjlinkv2.0 (force=false, process=true)
2021-12-17 16:53:55.104 - info: pjlinkv2.0 (30938) Got terminate signal TERMINATE_YOURSELF
2021-12-17 16:53:55.106 - info: pjlinkv2.0 (30938) terminating
2021-12-17 16:53:55.108 - info: pjlinkv2.0 (30938) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2021-12-17 16:53:55.165 - info: host.iobroker stopInstance system.adapter.pjlinkv2.0 send kill signal
2021-12-17 16:53:55.731 - info: host.iobroker instance system.adapter.pjlinkv2.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2021-12-17 16:53:58.247 - info: host.iobroker instance system.adapter.pjlinkv2.0 started with pid 30979
2021-12-17 16:53:59.687 - info: pjlinkv2.0 (30979) starting. Version 2.1.5 in /opt/iobroker/node_modules/iobroker.pjlinkv2, node: v12.22.6, js-controller: 3.3.21
2021-12-17 16:53:59.713 - info: pjlinkv2.0 (30979) Starting PJLink V2 Adapter...
2021-12-17 16:53:59.714 - info: pjlinkv2.0 (30979) Trying to connect to:10.0.0.44 on port:4352
2021-12-17 16:54:00.068 - warn: pjlinkv2.0 (30979) PJLink Class1 ist configured, but device supports Class1 3fe8c71e. Consider changing your config.
2021-12-17 16:54:05.088 - error: pjlinkv2.0 (30979) Power On result: 1 1adb9895
2021-12-17 16:54:10.092 - error: pjlinkv2.0 (30979) Power On result: 1 485082a3
2021-12-17 16:54:15.087 - error: pjlinkv2.0 (30979) Power On result: 1 21e75a12
2021-12-17 16:54:20.083 - error: pjlinkv2.0 (30979) Power On result: 1 406cfee1
2021-12-17 16:54:25.092 - error: pjlinkv2.0 (30979) Power On result: 1 49059f4c
2021-12-17 16:54:30.081 - error: pjlinkv2.0 (30979) Power On result: 1 0affa59f
2021-12-17 16:54:35.119 - error: pjlinkv2.0 (30979) Power On result: 1 14afd515
2021-12-17 16:54:40.085 - error: pjlinkv2.0 (30979) Power On result: 1 18c761a2
2021-12-17 16:54:45.096 - error: pjlinkv2.0 (30979) Power On result: 1 0ee78dec
2021-12-17 16:54:50.080 - error: pjlinkv2.0 (30979) Power On result: 1 15f17e90
2021-12-17 16:54:55.082 - error: pjlinkv2.0 (30979) Power On result: 1 44e81768
2021-12-17 16:55:00.081 - error: pjlinkv2.0 (30979) Power On result: 1 10fbc2a3
2021-12-17 16:55:05.089 - error: pjlinkv2.0 (30979) Power On result: 1 42bef50b
2021-12-17 16:55:10.080 - error: pjlinkv2.0 (30979) Power On result: 1 414c9395
2021-12-17 16:55:15.079 - error: pjlinkv2.0 (30979) Power On result: 1 06e4a1fe
2021-12-17 16:55:20.083 - error: pjlinkv2.0 (30979) Power On result: 1 5b036457
2021-12-17 16:55:25.082 - error: pjlinkv2.0 (30979) Power On result: 1 1f41e123
2021-12-17 16:55:30.081 - error: pjlinkv2.0 (30979) Power On result: 1 7937fe6e
2021-12-17 16:55:35.082 - error: pjlinkv2.0 (30979) Power On result: 1 291cf876
2021-12-17 16:55:40.084 - error: pjlinkv2.0 (30979) Power On result: 1 5a31336f
2021-12-17 16:55:45.080 - error: pjlinkv2.0 (30979) Power On result: 1 7ce70b5b
2021-12-17 16:55:50.089 - error: pjlinkv2.0 (30979) Power On result: 1 220f9373
2021-12-17 16:55:55.211 - error: pjlinkv2.0 (30979) Power On result: 1 02f61413
2021-12-17 16:56:00.090 - error: pjlinkv2.0 (30979) Power On result: 1 541bc19a
2021-12-17 16:56:05.086 - error: pjlinkv2.0 (30979) Power On result: 1 5cb953e6
2021-12-17 16:56:10.085 - error: pjlinkv2.0 (30979) Power On result: 1 71b9c388
2021-12-17 16:56:15.082 - error: pjlinkv2.0 (30979) Power On result: 1 38450652
2021-12-17 16:56:20.082 - error: pjlinkv2.0 (30979) Power On result: 1 284b336b
2021-12-17 16:56:25.093 - error: pjlinkv2.0 (30979) Power On result: 1 21ba8aba
2021-12-17 16:56:30.099 - error: pjlinkv2.0 (30979) Power On result: 1 5f4e17ca
2021-12-17 16:56:35.092 - error: pjlinkv2.0 (30979) Power On result: 1 4a210af9
2021-12-17 16:56:40.083 - error: pjlinkv2.0 (30979) Power On result: 1 2cec9ae6
2021-12-17 16:56:45.083 - error: pjlinkv2.0 (30979) Power On result: 1 419359b4
2021-12-17 16:56:50.082 - error: pjlinkv2.0 (30979) Power On result: 1 3fd05a53
2021-12-17 16:56:55.084 - error: pjlinkv2.0 (30979) Power On result: 1 512e6b45
2021-12-17 16:57:00.083 - error: pjlinkv2.0 (30979) Power On result: 1 2e145161
2021-12-17 16:57:05.082 - error: pjlinkv2.0 (30979) Power On result: 1 034e5d46
2021-12-17 16:57:10.084 - error: pjlinkv2.0 (30979) Power On result: 1 2bb7ef75
2021-12-17 16:57:15.083 - error: pjlinkv2.0 (30979) Power On result: 1 15fc08ec
2021-12-17 16:57:20.083 - error: pjlinkv2.0 (30979) Power On result: 1 4f94e95a
2021-12-17 16:57:25.082 - error: pjlinkv2.0 (30979) Power On result: 1 430389ec
2021-12-17 16:57:30.083 - error: pjlinkv2.0 (30979) Power On result: 1 18fd3f06
2021-12-17 16:57:35.085 - error: pjlinkv2.0 (30979) Power On result: 1 178f7847
2021-12-17 16:57:40.084 - error: pjlinkv2.0 (30979) Power On result: 1 63c66be2
2021-12-17 16:57:45.097 - error: pjlinkv2.0 (30979) Power On result: 1 59e454a0
2021-12-17 16:57:50.083 - error: pjlinkv2.0 (30979) Power On result: 1 001778b3
2021-12-17 16:57:53.001 - error: pjlinkv2.0 (30979) Power Off result: 1 53f79829
2021-12-17 16:57:55.084 - error: pjlinkv2.0 (30979) Power On result: 1 584cf17e
2021-12-17 16:58:00.085 - error: pjlinkv2.0 (30979) Power On result: 1 1a49c5c1
2021-12-17 16:58:05.088 - error: pjlinkv2.0 (30979) Power On result: 1 06bef8f8
2021-12-17 16:58:10.095 - error: pjlinkv2.0 (30979) Power On result: 1 2b343e41
2021-12-17 16:58:15.101 - error: pjlinkv2.0 (30979) Power On result: 1 1c5a6686
2021-12-17 16:58:20.091 - error: pjlinkv2.0 (30979) Power On result: 1 1a3fcf67
2021-12-17 16:58:25.086 - error: pjlinkv2.0 (30979) Power On result: 1 7b34484e
2021-12-17 16:58:30.087 - error: pjlinkv2.0 (30979) Power On result: 1 45ee9482
2021-12-17 16:58:35.090 - error: pjlinkv2.0 (30979) Power On result: 1 3f00e794
2021-12-17 16:58:40.088 - error: pjlinkv2.0 (30979) Power On result: 1 3b4667c8
2021-12-17 16:58:45.085 - error: pjlinkv2.0 (30979) Power On result: 1 7b7c4263
2021-12-17 16:58:48.421 - info: smartmeter.0 (535) Received 7 values, 3 updated
2021-12-17 16:58:50.087 - error: pjlinkv2.0 (30979) Power On result: 1 32ef6edc
2021-12-17 16:58:55.091 - error: pjlinkv2.0 (30979) Power On result: 1 480f7f38
2021-12-17 16:59:00.090 - error: pjlinkv2.0 (30979) Power On result: 1 175ff6e4
2021-12-17 16:59:05.088 - error: pjlinkv2.0 (30979) Power On result: 1 3b6b124e
2021-12-17 16:59:10.087 - error: pjlinkv2.0 (30979) Power On result: 1 36adb706
2021-12-17 16:59:15.088 - error: pjlinkv2.0 (30979) Power On result: 1 08c1806e
2021-12-17 16:59:20.086 - error: pjlinkv2.0 (30979) Power On result: 1 03f826c8
2021-12-17 16:59:25.085 - error: pjlinkv2.0 (30979) Power On result: 1 1111eba2
2021-12-17 16:59:30.089 - error: pjlinkv2.0 (30979) Power On result: 1 489d2d6b
2021-12-17 16:59:35.087 - error: pjlinkv2.0 (30979) Power On result: 1 6d2048f3
2021-12-17 16:59:40.092 - error: pjlinkv2.0 (30979) Power On result: 1 0c593331
2021-12-17 16:59:45.088 - error: pjlinkv2.0 (30979) Power On result: 1 4d6cf880
2021-12-17 16:59:50.088 - error: pjlinkv2.0 (30979) Power On result: 1 418c1d6a
2021-12-17 16:59:55.092 - error: pjlinkv2.0 (30979) Power On result: 1 693c5539
2021-12-17 17:00:00.092 - error: pjlinkv2.0 (30979) Power On result: 1 459d719f
2021-12-17 17:00:05.093 - error: pjlinkv2.0 (30979) Power On result: 1 48fdbb60
2021-12-17 17:00:10.091 - error: pjlinkv2.0 (30979) Power On result: 1 5c5b3a20
2021-12-17 17:00:15.086 - error: pjlinkv2.0 (30979) Power On result: 1 7c37cb1a
2021-12-17 17:00:20.087 - error: pjlinkv2.0 (30979) Power On result: 1 0cf1bacc
2021-12-17 17:00:25.091 - error: pjlinkv2.0 (30979) Power On result: 1 57d4c6da
2021-12-17 17:00:30.117 - error: pjlinkv2.0 (30979) Power On result: 1 74164f86
2021-12-17 17:00:35.092 - error: pjlinkv2.0 (30979) Power On result: 1 1de48b33
2021-12-17 17:00:40.088 - error: pjlinkv2.0 (30979) Power On result: 1 05525c68
2021-12-17 17:00:45.090 - error: pjlinkv2.0 (30979) Power On result: 1 43efd4c2
2021-12-17 17:00:50.095 - error: pjlinkv2.0 (30979) Power On result: 1 4bea428d
2021-12-17 17:00:55.093 - error: pjlinkv2.0 (30979) Power On result: 1 577d85bd
2021-12-17 17:01:00.091 - error: pjlinkv2.0 (30979) Power On result: 1 0635abab
2021-12-17 17:01:05.094 - error: pjlinkv2.0 (30979) Power On result: 1 0741823d
2021-12-17 17:01:10.095 - error: pjlinkv2.0 (30979) Power On result: 1 3dc49285
2021-12-17 17:01:15.093 - error: pjlinkv2.0 (30979) Power On result: 1 5f877e7a
2021-12-17 17:01:20.094 - error: pjlinkv2.0 (30979) Power On result: 1 5c2fdcaf
2021-12-17 17:01:25.095 - error: pjlinkv2.0 (30979) Power On result: 1 27da6380
2021-12-17 17:01:30.097 - error: pjlinkv2.0 (30979) Power On result: 1 46b565a5
2021-12-17 17:01:35.102 - error: pjlinkv2.0 (30979) Power On result: 1 722610e1
2021-12-17 17:01:40.097 - error: pjlinkv2.0 (30979) Power On result: 1 2bb16e80
2021-12-17 17:01:45.101 - error: pjlinkv2.0 (30979) Power On result: 1 52e5543b
2021-12-17 17:01:50.101 - error: pjlinkv2.0 (30979) Power On result: 1 58b2ad5d
2021-12-17 17:01:55.102 - error: pjlinkv2.0 (30979) Power On result: 1 5c9982ef
2021-12-17 17:02:00.100 - error: pjlinkv2.0 (30979) Power On result: 1 4b63016a
2021-12-17 17:02:05.101 - error: pjlinkv2.0 (30979) Power On result: 1 0ff00b96
2021-12-17 17:02:10.128 - error: pjlinkv2.0 (30979) Power On result: 1 66be233b
2021-12-17 17:02:15.108 - error: pjlinkv2.0 (30979) Power On result: 1 00ec2313
2021-12-17 17:02:20.104 - error: pjlinkv2.0 (30979) Power On result: 1 0024151d
2021-12-17 17:02:25.107 - error: pjlinkv2.0 (30979) Power On result: 1 5de67b89
2021-12-17 17:02:30.104 - error: pjlinkv2.0 (30979) Power On result: 1 048e1f27
2021-12-17 17:02:35.104 - error: pjlinkv2.0 (30979) Power On result: 1 726e8d7e
2021-12-17 17:02:40.111 - error: pjlinkv2.0 (30979) Power On result: 1 58b3aaff
2021-12-17 17:02:45.106 - error: pjlinkv2.0 (30979) Power On result: 1 3b36c02b
2021-12-17 17:02:50.210 - error: pjlinkv2.0 (30979) Power On result: 1 0e24c0ff
2021-12-17 17:02:55.107 - error: pjlinkv2.0 (30979) Power On result: 1 18be98db
2021-12-17 17:03:00.107 - error: pjlinkv2.0 (30979) Power On result: 1 1d4dc75c
2021-12-17 17:03:05.107 - error: pjlinkv2.0 (30979) Power On result: 1 58ab726d
2021-12-17 17:03:10.108 - error: pjlinkv2.0 (30979) Power On result: 1 22b6dde8
2021-12-17 17:03:15.117 - error: pjlinkv2.0 (30979) Power On result: 1 5dc0d287
2021-12-17 17:03:20.112 - error: pjlinkv2.0 (30979) Power On result: 1 4b3e336b
2021-12-17 17:03:25.108 - error: pjlinkv2.0 (30979) Power On result: 1 2d7f8b7c
2021-12-17 17:03:30.108 - error: pjlinkv2.0 (30979) Power On result: 1 64574b09
2021-12-17 17:03:35.110 - error: pjlinkv2.0 (30979) Power On result: 1 490036ab
2021-12-17 17:03:40.113 - error: pjlinkv2.0 (30979) Power On result: 1 656c9575
2021-12-17 17:03:45.115 - error: pjlinkv2.0 (30979) Power On result: 1 2b10095f
2021-12-17 17:03:49.597 - info: smartmeter.0 (535) Received 7 values, 3 updated
2021-12-17 17:03:50.132 - error: pjlinkv2.0 (30979) Power On result: 1 5093c2e0
2021-12-17 17:03:55.121 - error: pjlinkv2.0 (30979) Power On result: 1 69db2def
2021-12-17 17:04:00.115 - error: pjlinkv2.0 (30979) Power On result: 1 17d3cb03
2021-12-17 17:04:05.113 - error: pjlinkv2.0 (30979) Power On result: 1 35e2d6c2
2021-12-17 17:04:10.122 - error: pjlinkv2.0 (30979) Power On result: 1 0178685c
2021-12-17 17:04:15.118 - error: pjlinkv2.0 (30979) Power On result: 1 57070573
2021-12-17 17:04:20.123 - error: pjlinkv2.0 (30979) Power On result: 1 6ac3e01f
2021-12-17 17:04:25.117 - error: pjlinkv2.0 (30979) Power On result: 1 6401e306
2021-12-17 17:04:30.115 - error: pjlinkv2.0 (30979) Power On result: 1 20faa963
2021-12-17 17:04:35.122 - error: pjlinkv2.0 (30979) Power On result: 1 6503df9d
2021-12-17 17:04:40.122 - error: pjlinkv2.0 (30979) Power On result: 1 3f046adc
2021-12-17 17:04:45.120 - error: pjlinkv2.0 (30979) Power On result: 1 3d341a18
2021-12-17 17:04:50.124 - error: pjlinkv2.0 (30979) Power On result: 1 1589e997
2021-12-17 17:04:55.119 - error: pjlinkv2.0 (30979) Power On result: 1 46d9cc8b
2021-12-17 17:05:00.120 - error: pjlinkv2.0 (30979) Power On result: 1 21962c94
2021-12-17 17:05:05.121 - error: pjlinkv2.0 (30979) Power On result: 1 77868bff
2021-12-17 17:05:10.197 - error: pjlinkv2.0 (30979) Power On result: 1 74b01c4a
2021-12-17 17:05:15.127 - error: pjlinkv2.0 (30979) Power On result: 1 0e1121d4
2021-12-17 17:05:20.123 - error: pjlinkv2.0 (30979) Power On result: 1 618d7aba
2021-12-17 17:05:25.127 - error: pjlinkv2.0 (30979) Power On result: 1 70428690
2021-12-17 17:05:30.126 - error: pjlinkv2.0 (30979) Power On result: 1 4786fdde
2021-12-17 17:05:35.128 - error: pjlinkv2.0 (30979) Power On result: 1 11c3996d
2021-12-17 17:05:40.130 - error: pjlinkv2.0 (30979) Power On result: 1 56491749
2021-12-17 17:05:45.126 - error: pjlinkv2.0 (30979) Power On result: 1 656167bf
2021-12-17 17:05:50.126 - error: pjlinkv2.0 (30979) Power On result: 1 2ab11bba
2021-12-17 17:05:55.132 - error: pjlinkv2.0 (30979) Power On result: 1 1182f71b
2021-12-17 17:06:00.126 - error: pjlinkv2.0 (30979) Power On result: 1 0b78c5c3
2021-12-17 17:06:05.135 - error: pjlinkv2.0 (30979) Power On result: 1 6a2b4505
2021-12-17 17:06:10.134 - error: pjlinkv2.0 (30979) Power On result: 1 723e594a
2021-12-17 17:06:15.130 - error: pjlinkv2.0 (30979) Power On result: 1 5d4d367d
2021-12-17 17:06:20.133 - error: pjlinkv2.0 (30979) Power On result: 1 2da08a8d
2021-12-17 17:06:25.135 - error: pjlinkv2.0 (30979) Power On result: 1 441fb97f
2021-12-17 17:06:30.133 - error: pjlinkv2.0 (30979) Power On result: 1 35d3b2ff
2021-12-17 17:06:35.138 - error: pjlinkv2.0 (30979) Power On result: 1 5857459e
2021-12-17 17:06:40.135 - error: pjlinkv2.0 (30979) Power On result: 1 47006c24

Falls Du noch eine Idee hast, was ich probieren kann, gerne.

oberstel

@mpenno

da stimmt was nicht… im Log sehe ich, dass die Antworten vom Projektor verschlüsselt zurückkommen. Das erkennst Du dan den 8 Bytes nach einem „Result“. So wie das hier:

2021-12-17 16:54:05.088 - error: pjlinkv2.0 (30979) Power On result: 1 1adb9895

Eigentlich dürfte da nur „On result: 1“ stehen. Die 8 Byte dahinter (1adb9895) dürften da gar nicht stehen

Demnach sind alle Werte die dir angezeigt werden vermutlich einfach falsch.

Kann es sein, dass bei dem Projektor für die Kommunikation via PJLink ein Passwort hinterlegt ist? Bitte schaue doch mal in den Einstellungen des Gerätes…

mpenno

@oberstel Ja genau. Ich musste ein Passwort beim Beamer einstellen. Das gleiche Passwort habe ich im Adapter auch hinterlegt.

oberstel

@mpenno sagte in Adapter zur Steuerung von Projektoren (PJLink / PJLinkV2):

Ich musste ein Passwort beim Beamer einstellen.

Heißt das, der Projektor "will zwingend" ein Passwort?
Sind in dem Passwort eventuell Sonderzeichen vorhanden? Kannst Du probieren ein einfaches kurzes Passwort zu nehmen (ohne goß / klein, ohne Sonderzeichen, max. 6 Stellen...)

Oder kannst Du probieren das Passwort rauszunehmen?

oberstel

hm... da scheint echt noch ein Bug im Adapter zu sein

Wenn ein Passwort gesetzt ist, funktioniert die Kommunikation NICHT. Habe ich bei mir eben mal ausprobiert.

Ich gucke mal woran das liegt...

mpenno

@oberstel Hi

...und ich habe es gerade ohne mein einfaches Passwort ausprobiert.

Da sieht es bei mir so aus:

Schon ganz gut!

Also muss ich doch nicht zwangsläufig ein Passwort setzen. Interessant war aber, dass er die Error-Meldung mit gesetztem Passwort anzeigen konnte (siehe Screenshot vom letzten Mal).

Zwei Sachen sind mir aufgefallen: Der Adapter gibt als "Current input source name" "HDMI 2" aus, obwohl der Beamer auf "HDMI 1" steht. Zudem gibt der Beamer jede Sekunde den Inputnamen aus. Also so, als ob man auf der Fernbedienung die Status-Taste drücken würde.

Der Vollständigkeit das Log, welches ganz gut aussieht:

2021-12-19 19:45:47.319 - info: smartmeter.0 (535) Received 7 values, 3 updated
2021-12-19 19:47:00.659 - info: host.iobroker "system.adapter.pjlinkv2.0" enabled
2021-12-19 19:47:00.773 - info: host.iobroker instance system.adapter.pjlinkv2.0 started with pid 21138
2021-12-19 19:47:02.194 - info: pjlinkv2.0 (21138) starting. Version 2.1.5 in /opt/iobroker/node_modules/iobroker.pjlinkv2, node: v12.22.6, js-controller: 3.3.21
2021-12-19 19:47:02.225 - info: pjlinkv2.0 (21138) Starting PJLink V2 Adapter...
2021-12-19 19:47:02.226 - info: pjlinkv2.0 (21138) Trying to connect to:10.0.0.44 on port:4352
2021-12-19 19:47:02.324 - warn: pjlinkv2.0 (21138) PJLink Class1 ist configured, but device supports Class2. Consider changing your config.
2021-12-19 19:50:48.389 - info: smartmeter.0 (535) Received 7 values, 3 updated

Viele Grüße
Michael

oberstel

@oberstel sagte in Adapter zur Steuerung von Projektoren (PJLink / PJLinkV2):

Wenn ein Passwort gesetzt ist, funktioniert die Kommunikation NICHT. Habe ich bei mir eben mal ausprobiert.

Das habe ich jetzt gefixed und eine neu Version auf GitHub gestellt.
Siehe 2.1.6

oberstel

@mpenno sagte in Adapter zur Steuerung von Projektoren (PJLink / PJLinkV2):

Zwei Sachen sind mir aufgefallen: Der Adapter gibt als "Current input source name" "HDMI 2" aus, obwohl der Beamer auf "HDMI 1" steht. Zudem gibt der Beamer jede Sekunde den Inputnamen aus. Also so, als ob man auf der Fernbedienung die Status-Taste drücken würde.

HDMI 1 vs. HDMI 2: Die Definition der "sprechenden Namen" ist aktuell noch hard-wired im code des Adapters (kannst Du bei translateInputName in main.js ändern, wenn Du magst). Ich will noch eine passende Tabelle im Admin Interface einbauen.
Bitte teste mal ob das immer noch so ist. Habe die Kommandosteuerung Richtung Projektor in der 2.1.6 etwas geändert.

mpenno

@oberstel Hi, danke für die neue Version.

Der Beamer zeigt leider immer noch jede Sekunde die komischen Einblendungen, welcher HDMI Eingang ausgegeben wird an.
Aber das mit dem Passwort funktioniert jetzt. Cool ist auch die Funktion des "Ein- und Ausschalten des Beamers über den Adapter.
Ich konnte ihn, als er an war, von "true" auf "false" zum Ausschalten setzen. Der Beamer ging aus, aber als State wurde wieder "true" angezeigt. Ein Anschalten mittels Setzten des "true" auf "true" hat aber trotzdem den Beamer wieder angeschaltet. Vielleicht war es nur ein Anzeige-Problem des Admins.
Ich mache da gleich mal das Admin-Update von 5.1.25 auf 5.2.1.

Die Error-Code-Meldung, das da ein Lüfterproblem vorliegt, ist übrigens weg. Lag wohl doch an der alten Adapter-Version, die nicht mit dem Passwort umgehen konnte.

Mit den HDMI-Nummern probiere ich mal herum.

Danke bis hier her und viele Grüße

oberstel

Toll das das mit dem Passwort jetzt funzt!

@mpenno sagte in Adapter zur Steuerung von Projektoren (PJLink / PJLinkV2):

Der Beamer ging aus, aber als State wurde wieder "true" angezeigt.

Das Problem kenne ich - Gibt dem Adapter die Chance den "neuen" Status (off) auch zu erkennen

Über die Polltime kannst Du einstellen, wie oft (also Abstand in Millisekunden) der Projektor gefragt wird, in welchem Zustand er sich gerade befindet. Wenn Du dem Projekt das Kommando "ausschalten" schickst, startet dieser den Cool-Down Prozess, bis nach 5-10 Sekunden das Gerät ausgeht. In dieser Zeit meldet das Gerät vermutlich, das es noch "an" ist (mache schicken hier tatsächlich 'Cool-Down', meiner nicht - Warte also bitte mal bis der Cool-Down abgeschlossen und der Projekt aus ist (hört man ja). Dann sollte der Adapter den Zustand (on = false) richtig anzeigen.

Und ich vermute mal, dass genau diese Abfrage-Intervalle auch die komische Meldung des Projektors irgendwie initiiert. Um herauszufinden ob es da einen Zusammenhang gibt, stell doch mal die Polltime auf 2 Minuten und schaue, ob die Meldungen dann auch nur noch alle zwei Minuten kommen. Wenn das so sein sollte, bitte mal den Log-Level vom Adapter auf Silly stellen und im Log prüfen, bei welcher Aktivität der Adapters die Meldung des Projektors ggf. triggert.

mpenno

@oberstel
Hi,
das ist schwer zu testen. Die Abfragen an den Beamer kommen immer als Block. Auch wenn ich zwei Minuten als Polling einstelle.

Diese 7 Meldungen werden gesendet und dann kommt auch immer die Einblendung:

2021-12-23 18:51:03.400 - debug: pjlinkv2.0 (16721) By interval: check connectivity and power state = 1
2021-12-23 18:51:03.401 - debug: pjlinkv2.0 (16721) By interval: PowerState = on
2021-12-23 18:51:03.404 - debug: pjlinkv2.0 (16721) By interval: fetching info.error = 000000
2021-12-23 18:51:03.408 - debug: pjlinkv2.0 (16721) By interval: fetching info.isInput = 32
2021-12-23 18:51:03.412 - debug: pjlinkv2.0 (16721) By interval: check AVMT = 30
2021-12-23 18:51:03.420 - debug: pjlinkv2.0 (16721) OnChange: Send POWR 1 to device = OK
2021-12-23 18:51:03.535 - debug: pjlinkv2.0 (16721) OnChange: input source = 32 result: OK

Wenn Du mir sagst, wo ich im Quelltext etwas auskommentieren kann, um einzelne Abfragen zu unterbinden, könnte ich etwas mehr helfen.

Hier der Vollständigkeit einmal das komplette Log:

2021-12-23 18:40:11.160 - info: host.iobroker instance system.adapter.pjlinkv2.0 started with pid 16568
2021-12-23 18:40:12.649 - info: pjlinkv2.0 (16568) starting. Version 2.1.6 in /opt/iobroker/node_modules/iobroker.pjlinkv2, node: v12.22.6, js-controller: 3.3.21
2021-12-23 18:40:12.676 - info: pjlinkv2.0 (16568) Starting PJLink V2 Adapter...
2021-12-23 18:40:12.677 - info: pjlinkv2.0 (16568) Trying to connect to:10.0.0.44 on port:4352
2021-12-23 18:40:12.752 - warn: pjlinkv2.0 (16568) PJLink Class1 ist configured, but device returns Class 2. Consider changing your config.
2021-12-23 18:40:22.134 - info: host.iobroker "system.adapter.pjlinkv2.0" disabled
2021-12-23 18:40:22.135 - info: host.iobroker stopInstance system.adapter.pjlinkv2.0 (force=false, process=true)
2021-12-23 18:40:22.143 - info: pjlinkv2.0 (16568) Got terminate signal TERMINATE_YOURSELF
2021-12-23 18:40:22.145 - info: pjlinkv2.0 (16568) terminating
2021-12-23 18:40:22.146 - info: pjlinkv2.0 (16568) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2021-12-23 18:40:22.196 - info: host.iobroker stopInstance system.adapter.pjlinkv2.0 send kill signal
2021-12-23 18:40:22.719 - info: host.iobroker instance system.adapter.pjlinkv2.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2021-12-23 18:42:33.020 - warn: knx.0 (809) Object of state "knx.0.Zentralfunktionen.Zeiten.Datum_und_Uhrzeit" is missing the required property "common.type"
2021-12-23 18:42:33.114 - warn: knx.0 (809) Object of state "knx.0.Zentralfunktionen.Zeiten.Uhrzeit_lokal" is missing the required property "common.type"
2021-12-23 18:42:33.180 - warn: knx.0 (809) Object of state "knx.0.Zentralfunktionen.Zeiten.Datum_lokal" is missing the required property "common.type"
2021-12-23 18:42:39.153 - info: smartmeter.0 (683) Received 7 values, 3 updated
2021-12-23 18:43:01.534 - info: host.iobroker "system.adapter.pjlinkv2.0" enabled
2021-12-23 18:43:01.721 - info: host.iobroker instance system.adapter.pjlinkv2.0 started with pid 16721
2021-12-23 18:43:02.831 - debug: pjlinkv2.0 (16721) Redis Objects: Use Redis connection: 127.0.0.1:9001
2021-12-23 18:43:02.888 - debug: pjlinkv2.0 (16721) Objects client ready ... initialize now
2021-12-23 18:43:02.891 - debug: pjlinkv2.0 (16721) Objects create System PubSub Client
2021-12-23 18:43:02.901 - debug: pjlinkv2.0 (16721) Objects create User PubSub Client
2021-12-23 18:43:02.903 - debug: pjlinkv2.0 (16721) Objects client initialize lua scripts
2021-12-23 18:43:02.924 - debug: pjlinkv2.0 (16721) Objects connected to redis: 127.0.0.1:9001
2021-12-23 18:43:02.927 - silly: pjlinkv2.0 (16721) redis psubscribe cfg.o.system.user.*
2021-12-23 18:43:02.934 - debug: pjlinkv2.0 (16721) objectDB connected
2021-12-23 18:43:02.937 - debug: pjlinkv2.0 (16721) Redis States: Use Redis connection: 127.0.0.1:9000
2021-12-23 18:43:02.946 - debug: pjlinkv2.0 (16721) States create System PubSub Client
2021-12-23 18:43:02.948 - debug: pjlinkv2.0 (16721) States create User PubSub Client
2021-12-23 18:43:02.996 - debug: pjlinkv2.0 (16721) States connected to redis: 127.0.0.1:9000
2021-12-23 18:43:02.997 - debug: pjlinkv2.0 (16721) statesDB connected
2021-12-23 18:43:03.246 - info: pjlinkv2.0 (16721) starting. Version 2.1.6 in /opt/iobroker/node_modules/iobroker.pjlinkv2, node: v12.22.6, js-controller: 3.3.21
2021-12-23 18:43:03.272 - info: pjlinkv2.0 (16721) Starting PJLink V2 Adapter...
2021-12-23 18:43:03.273 - info: pjlinkv2.0 (16721) Trying to connect to:10.0.0.44 on port:4352
2021-12-23 18:43:03.273 - debug: pjlinkv2.0 (16721) Create Object .on
2021-12-23 18:43:03.315 - debug: pjlinkv2.0 (16721) Create Object .inputSource
2021-12-23 18:43:03.318 - silly: pjlinkv2.0 (16721) States system redis pmessage system.adapter.pjlinkv2.0.logLevel/system.adapter.pjlinkv2.0.logLevel:{"val":"silly","ack":true,"ts":1640281383276,"q":0,"from":"system.adapter.pjlinkv2.0","lc":1640281383276}
2021-12-23 18:43:03.323 - debug: pjlinkv2.0 (16721) Create Object .muteAudio
2021-12-23 18:43:03.329 - debug: pjlinkv2.0 (16721) Create Object .muteVideo
2021-12-23 18:43:03.332 - debug: pjlinkv2.0 (16721) Create Object .muteAV
2021-12-23 18:43:03.335 - debug: pjlinkv2.0 (16721) Create Object .info.isPower
2021-12-23 18:43:03.342 - debug: pjlinkv2.0 (16721) Create Object .info.name
2021-12-23 18:43:03.346 - debug: pjlinkv2.0 (16721) Create Object .info.vendor
2021-12-23 18:43:03.349 - debug: pjlinkv2.0 (16721) Create Object .info.model
2021-12-23 18:43:03.352 - debug: pjlinkv2.0 (16721) Create Object .info.inputSources
2021-12-23 18:43:03.355 - debug: pjlinkv2.0 (16721) Create Object .info.isInput
2021-12-23 18:43:03.358 - debug: pjlinkv2.0 (16721) Create Object .info.isInputName
2021-12-23 18:43:03.360 - debug: pjlinkv2.0 (16721) Create Object .info.error
2021-12-23 18:43:03.363 - debug: pjlinkv2.0 (16721) Create Object .info.errorText
2021-12-23 18:43:03.365 - debug: pjlinkv2.0 (16721) Create Object .info.class
2021-12-23 18:43:03.367 - debug: pjlinkv2.0 (16721) Create Object .info.other
2021-12-23 18:43:03.373 - debug: pjlinkv2.0 (16721) Create Object .info.connection
2021-12-23 18:43:03.377 - debug: pjlinkv2.0 (16721) Create Object .info.audioMute
2021-12-23 18:43:03.380 - debug: pjlinkv2.0 (16721) Create Object .info.videoMute
2021-12-23 18:43:03.381 - debug: pjlinkv2.0 (16721) Create Object .info.lightingHours#1
2021-12-23 18:43:03.385 - debug: pjlinkv2.0 (16721) Create Object .info.lampOn#1
2021-12-23 18:43:03.388 - debug: pjlinkv2.0 (16721) Create Object .info.lightingHours#2
2021-12-23 18:43:03.391 - debug: pjlinkv2.0 (16721) Create Object .info.lampOn#2
2021-12-23 18:43:03.402 - debug: pjlinkv2.0 (16721) Initial fetching info.class = 2
2021-12-23 18:43:03.403 - warn: pjlinkv2.0 (16721) PJLink Class1 ist configured, but device returns Class 2. Consider changing your config.
2021-12-23 18:43:03.410 - debug: pjlinkv2.0 (16721) Initial fetching info.name = Beamer
2021-12-23 18:43:03.415 - debug: pjlinkv2.0 (16721) Initial fetching info.vendor = EPSON
2021-12-23 18:43:03.420 - debug: pjlinkv2.0 (16721) Initial fetching info.model = EPSON LS11000W
2021-12-23 18:43:03.433 - debug: pjlinkv2.0 (16721) Initial fetching info.other = 100.---.100
2021-12-23 18:43:03.443 - debug: pjlinkv2.0 (16721) Initial fetching info.inputSources = 32 33
2021-12-23 18:43:03.471 - debug: pjlinkv2.0 (16721) Initial fetching lamp information: 81,1
2021-12-23 18:43:03.471 - debug: pjlinkv2.0 (16721) set lightingHours for Lamp#1 81
2021-12-23 18:43:03.472 - debug: pjlinkv2.0 (16721) set lampOn for Lamp#1 true
2021-12-23 18:45:03.402 - debug: pjlinkv2.0 (16721) By interval: check connectivity and power state = 1
2021-12-23 18:45:03.403 - debug: pjlinkv2.0 (16721) By interval: PowerState = on
2021-12-23 18:45:03.408 - debug: pjlinkv2.0 (16721) By interval: fetching info.error = 000000
2021-12-23 18:45:03.418 - debug: pjlinkv2.0 (16721) By interval: fetching info.isInput = 32
2021-12-23 18:45:03.425 - debug: pjlinkv2.0 (16721) By interval: check AVMT = 30
2021-12-23 18:45:03.429 - silly: pjlinkv2.0 (16721) States user redis pmessage pjlinkv2.0.on/pjlinkv2.0.on:{"val":true,"ack":true,"ts":1640281503416,"q":0,"from":"system.adapter.pjlinkv2.0","user":"system.user.admin","lc":1640019556642}
2021-12-23 18:45:03.436 - debug: pjlinkv2.0 (16721) OnChange: Send POWR 1 to device = OK
2021-12-23 18:45:03.479 - silly: pjlinkv2.0 (16721) States user redis pmessage pjlinkv2.0.inputSource/pjlinkv2.0.inputSource:{"val":32,"ack":false,"ts":1640281503473,"q":0,"from":"system.adapter.pjlinkv2.0","user":"system.user.admin","lc":1640019589251}
2021-12-23 18:45:03.498 - debug: pjlinkv2.0 (16721) OnChange: input source = 32 result: OK
2021-12-23 18:47:03.400 - debug: pjlinkv2.0 (16721) By interval: check connectivity and power state = 1
2021-12-23 18:47:03.401 - debug: pjlinkv2.0 (16721) By interval: PowerState = on
2021-12-23 18:47:03.406 - debug: pjlinkv2.0 (16721) By interval: fetching info.error = 000000
2021-12-23 18:47:03.410 - debug: pjlinkv2.0 (16721) By interval: fetching info.isInput = 32
2021-12-23 18:47:03.415 - debug: pjlinkv2.0 (16721) By interval: check AVMT = 30
2021-12-23 18:47:03.418 - silly: pjlinkv2.0 (16721) States user redis pmessage pjlinkv2.0.on/pjlinkv2.0.on:{"val":true,"ack":true,"ts":1640281623408,"q":0,"from":"system.adapter.pjlinkv2.0","user":"system.user.admin","lc":1640019556642}
2021-12-23 18:47:03.422 - debug: pjlinkv2.0 (16721) OnChange: Send POWR 1 to device = OK
2021-12-23 18:47:03.467 - silly: pjlinkv2.0 (16721) States user redis pmessage pjlinkv2.0.inputSource/pjlinkv2.0.inputSource:{"val":32,"ack":false,"ts":1640281623459,"q":0,"from":"system.adapter.pjlinkv2.0","user":"system.user.admin","lc":1640019589251}
2021-12-23 18:47:03.488 - debug: pjlinkv2.0 (16721) OnChange: input source = 32 result: OK
2021-12-23 18:47:39.938 - info: smartmeter.0 (683) Received 7 values, 3 updated
2021-12-23 18:49:03.400 - debug: pjlinkv2.0 (16721) By interval: check connectivity and power state = 1
2021-12-23 18:49:03.401 - debug: pjlinkv2.0 (16721) By interval: PowerState = on
2021-12-23 18:49:03.405 - debug: pjlinkv2.0 (16721) By interval: fetching info.error = 000000
2021-12-23 18:49:03.413 - debug: pjlinkv2.0 (16721) By interval: fetching info.isInput = 32
2021-12-23 18:49:03.416 - silly: pjlinkv2.0 (16721) States user redis pmessage pjlinkv2.0.on/pjlinkv2.0.on:{"val":true,"ack":true,"ts":1640281743411,"q":0,"from":"system.adapter.pjlinkv2.0","user":"system.user.admin","lc":1640019556642}
2021-12-23 18:49:03.461 - silly: pjlinkv2.0 (16721) States user redis pmessage pjlinkv2.0.inputSource/pjlinkv2.0.inputSource:{"val":32,"ack":false,"ts":1640281743457,"q":0,"from":"system.adapter.pjlinkv2.0","user":"system.user.admin","lc":1640019589251}
2021-12-23 18:49:03.517 - debug: pjlinkv2.0 (16721) By interval: check AVMT = 30
2021-12-23 18:49:03.518 - debug: pjlinkv2.0 (16721) OnChange: Send POWR 1 to device = OK
2021-12-23 18:49:03.549 - debug: pjlinkv2.0 (16721) OnChange: input source = 32 result: OK
2021-12-23 18:51:03.400 - debug: pjlinkv2.0 (16721) By interval: check connectivity and power state = 1
2021-12-23 18:51:03.401 - debug: pjlinkv2.0 (16721) By interval: PowerState = on
2021-12-23 18:51:03.404 - debug: pjlinkv2.0 (16721) By interval: fetching info.error = 000000
2021-12-23 18:51:03.408 - debug: pjlinkv2.0 (16721) By interval: fetching info.isInput = 32
2021-12-23 18:51:03.412 - debug: pjlinkv2.0 (16721) By interval: check AVMT = 30
2021-12-23 18:51:03.415 - silly: pjlinkv2.0 (16721) States user redis pmessage pjlinkv2.0.on/pjlinkv2.0.on:{"val":true,"ack":true,"ts":1640281863408,"q":0,"from":"system.adapter.pjlinkv2.0","user":"system.user.admin","lc":1640019556642}
2021-12-23 18:51:03.420 - debug: pjlinkv2.0 (16721) OnChange: Send POWR 1 to device = OK
2021-12-23 18:51:03.464 - silly: pjlinkv2.0 (16721) States user redis pmessage pjlinkv2.0.inputSource/pjlinkv2.0.inputSource:{"val":32,"ack":false,"ts":1640281863460,"q":0,"from":"system.adapter.pjlinkv2.0","user":"system.user.admin","lc":1640019589251}
2021-12-23 18:51:03.535 - debug: pjlinkv2.0 (16721) OnChange: input source = 32 result: OK
2021-12-23 18:52:40.631 - info: smartmeter.0 (683) Received 7 values, 3 updated
2021-12-23 18:53:03.401 - debug: pjlinkv2.0 (16721) By interval: check connectivity and power state = 1
2021-12-23 18:53:03.402 - debug: pjlinkv2.0 (16721) By interval: PowerState = on
2021-12-23 18:53:03.408 - debug: pjlinkv2.0 (16721) By interval: fetching info.error = 000000
2021-12-23 18:53:03.411 - debug: pjlinkv2.0 (16721) By interval: fetching info.isInput = 32
2021-12-23 18:53:03.422 - silly: pjlinkv2.0 (16721) States user redis pmessage pjlinkv2.0.on/pjlinkv2.0.on:{"val":true,"ack":true,"ts":1640281983407,"q":0,"from":"system.adapter.pjlinkv2.0","user":"system.user.admin","lc":1640019556642}
2021-12-23 18:53:03.427 - debug: pjlinkv2.0 (16721) By interval: check AVMT = 30
2021-12-23 18:53:03.433 - debug: pjlinkv2.0 (16721) OnChange: Send POWR 1 to device = OK
2021-12-23 18:53:03.441 - silly: pjlinkv2.0 (16721) States user redis pmessage pjlinkv2.0.inputSource/pjlinkv2.0.inputSource:{"val":32,"ack":false,"ts":1640281983437,"q":0,"from":"system.adapter.pjlinkv2.0","user":"system.user.admin","lc":1640019589251}
2021-12-23 18:53:03.525 - debug: pjlinkv2.0 (16721) OnChange: input source = 32 result: OK
2021-12-23 18:55:03.401 - debug: pjlinkv2.0 (16721) By interval: check connectivity and power state = 1
2021-12-23 18:55:03.402 - debug: pjlinkv2.0 (16721) By interval: PowerState = on
2021-12-23 18:55:03.405 - debug: pjlinkv2.0 (16721) By interval: fetching info.error = 000000
2021-12-23 18:55:03.409 - debug: pjlinkv2.0 (16721) By interval: fetching info.isInput = 32
2021-12-23 18:55:03.414 - debug: pjlinkv2.0 (16721) By interval: check AVMT = 30
2021-12-23 18:55:03.416 - silly: pjlinkv2.0 (16721) States user redis pmessage pjlinkv2.0.on/pjlinkv2.0.on:{"val":true,"ack":true,"ts":1640282103408,"q":0,"from":"system.adapter.pjlinkv2.0","user":"system.user.admin","lc":1640019556642}
2021-12-23 18:55:03.419 - debug: pjlinkv2.0 (16721) OnChange: Send POWR 1 to device = OK
2021-12-23 18:55:03.464 - silly: pjlinkv2.0 (16721) States user redis pmessage pjlinkv2.0.inputSource/pjlinkv2.0.inputSource:{"val":32,"ack":false,"ts":1640282103458,"q":0,"from":"system.adapter.pjlinkv2.0","user":"system.user.admin","lc":1640019589251}
2021-12-23 18:55:03.529 - debug: pjlinkv2.0 (16721) OnChange: input source = 32 result: OK

Viele Grüße

NEWS

Adapter zur Steuerung von Projektoren (PJLink / PJLinkV2)

Support us

399
Online

31.6k
Users

79.5k
Topics

1.3m
Posts

NEWS

Adapter zur Steuerung von Projektoren (PJLink / PJLinkV2)

Support us

399Online

31.6kUsers

79.5kTopics

1.3mPosts

399
Online

31.6k
Users

79.5k
Topics

1.3m
Posts